Master data Chnage Run

Hi,
is master data activation and attribute change run are same. I would like to know how to schedule change run suppose 0material is my master data..

Hi,
yes, basically it is the same. The attr. and hierarchy change run is doing a bit more than just activating the master data. It is also adjusting aggregates to the possible made new alignments for navigational attributes. To schedule it, just goto rsa1->tools->attr. and hierarchy change run. Click on selection, enter a start date and time or any other start condition, apply a period if you want to have it running regularly and automatically, save that settings and click on Run/Execute.
kind regards
Siggi

Similar Messages

Master data change run.

dear all,
quick and easy question... after loading 0asset_attr_text, do i need to have an attribute change run? if not why? thanks.

Hi......
Whenever master data attributes or hierarchy is loaded an attribute chnage run need to be performd due to the following reasons:
1. When a master data is changed/updated it gets loaded into the master data table as version "M"(modified). It is only after a attribute chnage run that the master data becomes activated i.e. version "A".....and while activation of master data SID gets generated........SID is very essential for Extended Star Scema...........Otherwise Transaction data load will fail due to SID issue......
2. Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.
But it is required for attribute but not for text.......So for 0asset_attr_text attribute change run is not required.......
Hope this helps......
Regards,
Debjani.......
Edited by: Debjani Mukherjee on Oct 18, 2008 12:18 AM
Edited by: Debjani Mukherjee on Oct 18, 2008 12:20 AM
Edited by: Debjani Mukherjee on Oct 18, 2008 12:21 AM

What are the dependent master data for running MRP

Hi Experts,
My client wants to Run MRP After 8 Months of implementation. Now i want to know
1) What are the Master Data need to be check. They are Using the Strategy 20.
2) They have confirmed sales order for few customers. Forecast sales orders for few customers.How to map it in sap.
3) Where will i get Gross Requirement in SAP. Because MRP run will generates the net requirements.
4) Is there any report in SAP displays the Forecast values for the selected material.
Please help me on the above points.
Thanks
Satheesh

HI Vishwa Upadhyay,
Thank you Once again,
The first point is cleared. Can you please suggest me on the 2,3& 4 points please. What are the configuration settings needed for the different sales order type( i.e.. confirmed and forecast)
Thanks
Satheesh.N

Issues with Master Data Change Run after upgrade 7.3.1

We have upgraded to 7.3.1 on both our BW and ECC clients. When we first run out change run in BW it chose to drop and rebuild aggregates
on changes that usually don't cause a drop and rebuild. They usually do a delta.
Has anyone had this issue once upgraded?
We looked at our performance setting in SPRO for aggregates and the settings have not changed.

I loaded data for 0Material, 4 fields are not getting populated....when I checked in R/3 base table and RSA3, I am able to see data for those 4 fields. But in PSA and 0MATERIAL I am not seeing data for those fields.
THose 4 fields are Z fields mapped to Standard fields in MARA table.
As you say you can see the values of these fields in RSA3, We can rule out that the fields arent hidden. Check the mapping on the BI side, do you have all the Zinfoobjects added to the Omaterial and the corresponding mapping of source fields to target fields.
0CUSTOMER_ATTR has some data...I added new field in datasource as well as in BW also. After creating transformation I executed the DTP, it is throwing same error in every data package
"Record filtered in advance as error records with the same key exist".
Load till PSA is Init with data transfer and DTP is delta.
there are some duplicate records in the master data values that are coming in. You can manually change them in PSA and load. And if you are sure the duplicated records can be dropped, you can tick the HANDLE DUPLICATE RECORDS in DTP - update tab

DTP loading to master data is running long due to lock on SID table

Hi All,
We have DTP loading directly from infoobject to master data infobject. DTP usually takes less than 30min to update but at times its observed the DTP runs for hours to update. No dump was found on ST22. and no locks on sm12 apart from this DTP. On analysing the log in sm37, we found exclusive locks on the SID tables.
18.03.2014 02:06:53 All records forwarded                                                                             RSM2          730
18.03.2014 02:22:32 EXTRACTION OF DATAPACKAGE 000014                                                                  RSAR          051
18.03.2014 02:22:33 All records forwarded                                                                             RSM2          730
18.03.2014 02:38:36 EXTRACTION OF DATAPACKAGE 000015                                                                  RSAR          051
18.03.2014 02:38:37 All records forwarded                                                                             RSM2          730
18.03.2014 02:55:25 EXTRACTION OF DATAPACKAGE 000016                                                                  RSAR          051
18.03.2014 02:55:25 All records forwarded                                                                             RSM2          730
18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE                                                                DBMAN         099
18.03.2014 03:13:56 TRUNCATE TABLE "/BI0/0600000066"                                                                  DBMAN         099
18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00                                                             DBMAN         099
18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE                                                                DBMAN         099
18.03.2014 03:13:56 LOCK TABLE "/BI0/0600000066" IN EXCLUSIVE MODE                                                   DBMAN         099
18.03.2014 03:13:56 NOWAI                                                                                             DBMAN         099
18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00                                                             DBMAN         099
18.03.2014 03:13:58 EXTRACTION OF DATAPACKAGE 000017                                                                  RSAR          051
18.03.2014 03:13:59 All records forwarded                                                                             RSM2          730
18.03.2014 03:34:24 EXTRACTION OF DATAPACKAGE 000018                                                                  RSAR          051
18.03.2014 03:34:25 All records forwarded                                                                             RSM2          730
18.03.2014 03:56:03 EXTRACTION OF DATAPACKAGE 000019                                                                  RSAR          051
18.03.2014 03:56:03 All records forwarded                                                                             RSM2          730
18.03.2014 04:19:55 EXTRACTION OF DATAPACKAGE 000020                                                                  RSAR          051
18.03.2014 04:19:56 All records forwarded                                                                             RSM2          730
18.03.2014 04:44:07 SQL: 18.03.2014 04:44:07 ALEREMOTE                                                                DBMAN         099
18.03.2014 04:44:07 TRUNCATE TABLE "/BI0/0600000068"                                                                  DBMAN         099
18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:02                                                             DBMAN         099
18.03.2014 04:44:09 SQL: 18.03.2014 04:44:09 ALEREMOTE                                                                DBMAN         099
18.03.2014 04:44:09 LOCK TABLE "/BI0/0600000068" IN EXCLUSIVE MODE                                                   DBMAN         099
18.03.2014 04:44:09 NOWAI                                                                                             DBMAN         099
Is the lock on the SID table reason for the delay?? if so how to avoid this delay?
if not, What are the other possibilties to avoid this issue ??
Thanks in advance.

Hello Yogesh,
priority of the Job is 'A' . Is this related to lock on SID table as when i observe system logs for successful runs i don see the lock on SID table.
please refer the below log for successful run.
19.03.2014 07:16:21 EXTRACTION OF DATAPACKAGE 000051
19.03.2014 07:16:22 All records forwarded
19.03.2014 07:16:34 EXTRACTION OF DATAPACKAGE 000052
19.03.2014 07:16:34 All records forwarded
19.03.2014 07:16:47 EXTRACTION OF DATAPACKAGE 000053
19.03.2014 07:16:48 All records forwarded
19.03.2014 07:17:02 EXTRACTION OF DATAPACKAGE 000054
19.03.2014 07:17:03 All records forwarded
19.03.2014 07:17:17 EXTRACTION OF DATAPACKAGE 000055
19.03.2014 07:17:17 All records forwarded
19.03.2014 07:17:31 EXTRACTION OF DATAPACKAGE 000056
19.03.2014 07:17:32 All records forwarded
19.03.2014 07:17:45 EXTRACTION OF DATAPACKAGE 000057
19.03.2014 07:17:45 All records forwarded
19.03.2014 07:17:58 EXTRACTION OF DATAPACKAGE 000058
19.03.2014 07:17:59 All records forwarded
19.03.2014 07:18:11 EXTRACTION OF DATAPACKAGE 000059
19.03.2014 07:18:11 All records forwarded
19.03.2014 07:18:24 EXTRACTION OF DATAPACKAGE 000060
19.03.2014 07:18:24 All records forwarded
19.03.2014 07:18:37 EXTRACTION OF DATAPACKAGE 000061
19.03.2014 07:18:37 All records forwarded
19.03.2014 07:18:50 EXTRACTION OF DATAPACKAGE 000062
19.03.2014 07:18:51 All records forwarded
19.03.2014 07:19:04 EXTRACTION OF DATAPACKAGE 000063
19.03.2014 07:19:06 All records forwarded
19.03.2014 07:19:19 EXTRACTION OF DATAPACKAGE 000064
19.03.2014 07:19:20 All records forwarded
19.03.2014 07:19:32 EXTRACTION OF DATAPACKAGE 000065
19.03.2014 07:19:33 All records forwarded
19.03.2014 07:19:47 EXTRACTION OF DATAPACKAGE 000066
19.03.2014 07:19:47 All records forwarded
19.03.2014 07:19:53 EXTRACTION OF DATAPACKAGE 000067
19.03.2014 07:19:53 Start of Serial Processing Processing is Executed in the Same LUW
19.03.2014 07:19:53 Processing started for batch ID DTPR_1739894_1 process 3
19.03.2014 07:19:53 Processing completed for batch ID DTPR_1739894_1 process         3
19.03.2014 07:19:53 End of Serial Processing Executed in the Same LUW
19.03.2014 07:19:54 Technical status 'Green' (user ALEREMOTE)
19.03.2014 07:19:57 Set overall status to 'Green' (user ALEREMOTE)
19.03.2014 07:20:41 Processing completed for batch ID DTPR_1739894_1 process         2
19.03.2014 07:20:41 Job finished
Thanks

Nessessary Field Required in Master Data to run Of MRP

Dear All
As Per The Requirement of MRP Whats the nessessary Field fillup in Master Data Of a Particular Finished Product & Also Raw Material.
Thanks
Pankaj Agarwal

Hi Pankaj,
For MRP Type PD, other important fields for MRP are
MRP1
   - Lotsize
   - MRP Controller (Reporting purpose)
   - MRP Group (Generally not a mandatory field) but certain parameters can be defaulted in configuration for an MRP group.
MRP2
- Procurement type
- Special Procurement type (if special planning process is going to be used)
- Inhouse Prodn / Planned delivery time
- Schedule margin key
- Safety Stock details if safety stock is planned for material
MRP3
- Strategy Group
- Consumption mode and Forward consumption and Backward consumption details if it is a MTS strategy used.
- Availability check (Group)
MRP4
- BOM Selection method
- Individual and Collective indicator
Hope this helps....Reward your points....,
Regards,
Prasobh

Master data Process chain running long time

Dear SDN Team,
PC Process Chain: General Master Data - time running is about 4.5 hours . how we can improve running time.
There are 15-25 info objects are loading from this process chain.
any steps to improve the performace
thanks and kind regards,
Lakshman Kumar G

Hi,
Go to the function module RSD_IOBJ_GET to find the object name of the dimension. Go to SE37 & proceed as follows.
I_IOBJNM = 'Info Object Name'
I_OBJVERS = 'A'
I_BYPASS_BUFFER = 'X'
and then Execute the FM.
Double click on the "'E_S_VIOBJ'" and find the number in the field 'u201ENUMBRANR‟'
and add BIM to the number taken from NUMBRANR.
Goto SNRO T-Code and enter BIM+the number and edit.
From Edit--> Set up Buffering --> Main memory, select the buffering check box and enter approx 500.
This needs to be done for all the master and your dataload performance would improve.
Regards,
Mani

Error in Setting lock for Master Data Load

Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
Bala

Hi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP

Impact on transactional Loads if Master data is not loaded

Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21.
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?

Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa full repair.
Regards,
Rahul

HR master data transfer ( Insert & Update Mode )

Hi All,
First Concern:
I am using Idoc to transfer HR Master data from SAP to a third party application am using message type HRMD_A and basic type HRMD_06.To transfer delta changes i have configured change pointer.
I am using the report RHALESMD to transfer the changed record.Whenever I change a HR Master data and run this report ,an Idoc is generated for the changed HR Record.
But I have requirement as mentioned, If I change record , for example I am changing Personal data Infotype with Start Date as future (Jan30 2009) and I change the First name.What happens is ,when I run the report(RHALESMD) an Idoc is generated for the change.But the requirement is , as the start date for this change is in the future(Jan30 2009),the Idoc for this change should not be generated today but on Jan30 2009.i.e when in run the report(RHALESMD) today no Idoc should be generated for this change. ..but when I run the report again on 30th jan 2009 ,it should generate an Idoc for the change which I have made as the Start Date is set to Jan30 2009.
Could anyone suggest me as how I could achive this requirment or else is there any other report which could help me out for this requirement.
Second concern:
I am using Tcode PFAL for initial load.In this report we have two loading options 1.Initial 2.Update.We are using Initial option for initial load.But for delta changes if i use update...its not working properly...can one help me out in this too
Thanks in Advance,
Maqsood

PFAL transaction is used when we want to transfer an object without a change pointer. For sending deltas you should be using RBDMIDOC (TRAN - BD21) and provide the message type . This program will send the delta.
But neither of the programs PFAL or BD21 will help in filtering the future dated record. This filtering should happen in an user exit for outbound IDoc. The user exit need to be coded to exclude a change pointer from processing if the key in CP contains a future dated record and that may get processed. This may get complex as you would like to send part of the changed record and not the other part of changed record. For example if you create a new IT0002 with future date, you would still want the current record which was delimited one day prior to future dated record.
It would be nice to have the target system handle this instead of handling it within SAP.
Regards
Ravikumar

0material master data delta loading

Hi,
Could anyone let me know how can i check in R/3 side if 0material delta laoding getting 0 record?
What I mean is that: we have a process chain loading all master data, including "0materail" Material Number(0MATERIAL_ATTR), and Product number(0MATERIAL_TEXT).
and it runs once a week.
this week, I noticed that there is both 0 records has been laoded from R/3 to BW for both (0MATERIAL_ATTR) and (0MATERIAL_TEXT) delta load. while teh other master data load runs normal, get records as normal.
But i am not sure how to check in R/3 side, to ensure whether there are some new records created during this week or not.
which transctiion and table i should check.
Please advice,
Ping

Check there is any Selection criteria in the Infopackage data selection tab. if you have any selection provide the same selection in MARA.
If you don't have any selection and if u won't see records in RSA3 means... some problem with extractor.
all the best.
Regards,
Nagesh.

Master data avtivation problem

Hi All,
Any budy help me on this issue ,
i have a master data activation problem ,
after loading the master data i run the attribute change run it is sucessfully compleated ,but the proble master data tables is not updated status is still in 'M' version in 0Person table
   PERSON   OBJVERS
   00019823 A
   00019823 A
   00019823 M
   00019823 M
i want to activate this      'M' version to 'A' version\
this is an urgent issue please help ASAP.
Thanks,
Tom

Hello ALl,
I am also facing the same problem(activation of master data) but with 0COSTCENTER. I have checked records in CSKS table in R/3 system. I could not see any M version records lying there.I have done fresh reload and ran successfully attribute change run also.
this is very urgent,please help me ASAP.
many Thanks in advance.
Regards
Ramprasad

Reg: No enries in SID table of attribute of a Master data info object

Hello SAP Gurus!!!
I Hope everyone is doing good.
I found some issues , when i loaded master data into master data info object in sap bi.
I have an object which is holding master data (master data info object)---ZEMPID(employee id)
I have attributes for this object are : Emp name , Emp Phone number
I loaded master data attributes into ZEMPID. I could see some entries in SID table of ZEMPID char info object .
But i am unable to see the entries in SID table of Emp name , which is a attribute of master data info object.
According to my knowledge whenver we load data into sap bi , automatically sid values will get generated for that characterstic info object.
so here in this case Emp name is also a char info object , so whenever we load the data into master data info object , we have to see the entries in SID table of Emp name also .But i am unable to see the entries in the SID table of Emp name. .
So what might be the problem ?
Awaiting for your valuable answers!!!
Cheers!!

Hi Rajavamshi,
You are right whenever we load data in BI, it will create SIDs for info objects.
But it will create SID in 'S Table' not in X/Y - Table.
If master data is enabled for Emp name then it will create SID in X/Y table. I think the master data is not enabled for attribute(Emp Name).
Please check in S Table, the SIDs will be there.
If it is not the case, activate the attributes info objects and EMPID info object and load the master data and run ACR for EMP ID.
If it is not working still, then do master data check in RSRV.
Regards,
Vignesh.B

Cann't load Master Data

Hi Experts,
My current project is CRM BI implementation. I am trying to load in 0BPARTNER Master data and DataSource 0BPARTNER_ATTR is enhanced by 44 customed attributes and it is 3.X DataSource. So, I created 44 InfoObjects, added those InfoObjects as an Attributes of 0BPARTNER. I created InfoSource, InfoPackage and Update Rule accordingly. I got data in PSA. But in DataTarget, I saw transferred records and no added records. Where should I troubleshoots and please tell me steps. Thank you.
Md

Hi Md,
The first step in troubleshooting is to right click on 0BPARTNER and select Maintain Master data option. I think all the master data is being poppulated in those fields, but it shows 0 records added as the 0BPARTNER were already in the system and so in the FULL update it filled all the attributes but still shows added records 0. If the InfoObject are filled, activate the master data and run the attribute change run if necessary.
If the master data is not in the maintenance., please chack the transfer rules and then the PSA. If the PSA is not being poppulated, please check the 0BPARTNER_ATTR datasource in RSA3 in CRM system.
Please let me know if it helps.
Regards,
Pankaj

How to delete Master Data transferred from ECC to APO via CIF

Hi, all
I'm connecting SCM 5.1 with ECC 6.0 via CIF.
When activating Integration Model in ECC, the following error occurred;
"Location 0001 of type 1001 (BSG 592BUSGP) already exists in APO"
This is because Location 0001 was already transferred from different ECC client via CIF, and not cleared.
I'm now trying to initialise master data transferred from ECC to APO via CIF, but in vain.
I suppose I have to first delete all master data CIFed from ECC in APO, or have to execute initialisation of APO master data with ECC data in ECC.
Please tell me how to do this.
For details, please read the followings;
I connected APO client with ECC client 590.
I transferred Plant and Material Master from ECC to APO via CIF.
After that, I wanted to change ECC client from 590 to the other.
I created the other client (592) by client-copying from 590 with SAP_ALL copy profile.
I deactivated Integration Model in ECC 590, and activated the same in ECC 592.
Here, I faced the problem.
The initial data transfer failed due to the duplicate of data.
Now I'm wondering how I can initialise master data in APO and transfer initial data from ECC.
Due to testing purposes, I have to change ECC clients from one to the other this time, but I cannot initialise master data in APO and cannot tansfer initial data from different ECC client.
thanks in advance,
Hozy

Hi all,
Thank you very much indeed for lots of your replies.
Thanks to all of your advices, I'm getting to understand what to do.
Well, I'll say I have to create one more client for testing with other ECC clients or I have to rebuild the client by client-copying from 001 and implementing all transportation requests, for marking del flags to each master data and running del programme sound like tough work, and sound like odd ..
Then, I've got next issue here.
In SCM-APO, I use BI objects, and , if I have to create several clients for testing, I have to set up clients where you can use both BI objects and CIFed master data.
I suppose I have to change 'BWMANDT' in RSADMINA and make RSA1 accessable in other SCM clients and implement tests.
Also, I have to register BI System for newly created SCM clients in RSA1-SourceSystem.
Well, if you have any experiences on this kind of use, and if you have any advice on it, please give me any tips.
Particulary, I'd appreciate very much if you give me advice on which way you have chosen; creating several clients or rebuilding the one client in SCM-APO when you use both BI objects, CIFed master data and Demand Planning.
Thanks in advance.
Hozy

Master data Chnage Run

Similar Messages

Maybe you are looking for