Master Data conflict between different sources

Hello Experts,
We have conflict in Master data which is getting extracted from different R3 systems.
So we have maintained the transcodifiction by adding Prefix ID of logical system ID for the second R/3 system where we have a confict in the Master data. (Say in my case we have this for 0Material, 0Vendor, 0Customer).
We have done this transcodification at the Transfer rule level by maintaining a routine for both the Attribut information and text information with some codifidition. And its working fine in Production.
Now we have stuck with the Hierarchy  information for this?
As in the case of Attr and Text we have option to write a routine at the transfer rule level but we dont have the same for Hierarchy!!!!
So please guide me as to what needs to be done for the Hierarchy level transcodification. (We are not maintaining this routine at the Object level but we are maintaing this at transfer rule level because of some reasons).
Help me with the solution!
Thanks
Raman
Edited by: Raman R on Mar 31, 2009 8:04 AM

Are you maintaining hierarchy manually or loading via flat file ???
When you maintain you will have access to your transcoded master data hence you wil be able to maintain.
When you load from flat files you need to maintain it appropriately.
P.S : Didn't you go with compounding concept of sourcesystem or logsys to separate master data ??
Edited by: Praveen G on Mar 31, 2009 7:32 AM

Similar Messages

  • Differentiating Master Data from two different source systems

    Friends,
    i have used standard InfoObjects that provide master data for two InfoCubes which take data from two different source systems. Now the some of the master data is identical in both the source systems (example: 10 stands for "Industrial" in one whereas 10 stands for "Agricultural" in the other). What do i do so that the system(BW) differentiates the two.
    Thanks in advance for all the help.
    Mike

    I tried to include the 0SOURSYSTEM in the compounding of this InfoObject (for master data) but it gives me a list of other objects that use this InfoObject as a reference characteristic and also says that this InfoObject is used in a ODS and data needs to be emptied in the ODS before activating  this InfoObject.  Please let me know if there is any way out of it.
    Thanks
    Mike

  • Regarding master data loading for different source systems

    Hi Friends,
    I have an issue regarding master data loading.
    we have two source systems one is 4.6c and another is ecc 6.0.
    First i am loading the master data from 4.6c to bi7.0.
    Now this 4.6c is upgraded to ecc6.0.
    *In 4.6c and ecc6.0c master data is changing.
    After some time there is no 4.6c, only ecc 6.0 is there.
    Now if i load master data from ecc6.0 to bi7.0 what will happen.
    Is it possible ?
    Could you please tell me?
    Regards,
    ramnaresh.

    Hi ramnaresh porana,
    Yes, its possible. You can load data from ECC.
    Data will not change, may be you may get more fields in datasource at r/3 side, but BW/BI side no change in mappings structures are same. So data also same.
    You need to take care of Delta's before and after upgrade.
    Hope it Helps
    Srini

  • Master data conflict when merging 2 BW systems

    Hello All,
    We are currently merging 2 BW systems (one existing system and creating the objects of the other system in the new system) which are fed from 2 different source R3 systems. We have conflicts in master data number ranges between the 2 R3 systems. We explored the option of compounding , however in this case we need to delete the existing data in the BW system which is not plausible.
    Have any of dealt with such a situation, if so please advise on the solution.Thanks in advance.
    Regards,
    Ashwin G

    Hi KK,
    We thought of that, but doing tht would result confusion to the end user as the material number would look different.
    Thanks and regards,
    Ashwin G

  • Master data load from 2 source system

    Hi all,
            I am working on a project which has 2 source systems.
    Now I have to load master data from 2 source systems without making 0LOGSYS as compunding
    attribute. Because all the objects which i want to use compunding attribute are reference
    objects for lot of other info objects. So, i dont want to change the business content
    objects structure. Please guide me
    Thanks

    Hi,
    I cube there is nothing to do with compounding attribute, it will be handled in MD IO level.  As your requirement to separate the transaction happen in different source system then make add another info object as Zsource and make it as nav. attribute then design your report based on nav. attribute.
    Note that this separation is only possible in Material Related transaction not for others.
    Thanks
    BVR

  • Data migration between different ECC versions

    Is there a way to migrate data between two different ECC versions?
    I know that there are differences between the tables and therefore TDMS transports are not possible. But is there another way to get master data from one version (6.0 EHP 3) to another one (6.0 EHP 4)? For example a tool that can prepare the exported data for the import in a higher version?
    thx

    That's indeed the most feasible option we have on the table right now. Although we have a lot of Z-fields and would need to transfer them with LSMW.
    The ZMATMAS has only been built for outbound...

  • Master Data synchronisation between BW and SEM BCS

    Hi,
    Can any one guide me how to synchronize data between BW and SEM BCS.
    Master data like Cost centre, Segment, Profit centers and all other sub assignments are created in BW  from source ystem i.e SAP.
    Now when I upload data into BCS, i am facing errors l;ike master data doex not exists.
    Currently I am Flexible upload for updating into BCS.
    So pls suggest me hoe to proceed this approach in Production? IS there any synchronisation program which does this automatically from BW to BCS?
    Regards,
    Richard

    Hi Scotsman,
    The issue is, here we have created Sub Assignments, where the master data for these sub assignments will increase on daily basis.
    Can say atleast 50 Sub assignmenrs are created as new master data, example: Customer is a sub assignment, but it is assigned only for few accounts, so taking sub ledgerlevel data inco is not an issue.
    Now when transaction data is posted in to BCS, the sub assignments master data is created automatically.
    Now the question is how to get the data in BW for the specific sub assignmnets into BCS.
    Currently I planned to use the [program UCMDSYNC to do this.
    Pls do suggest me if any other option available for me.
    Thanks in Advance,
    Richard

  • Vendor Master Data Transfer Between the Clients

    Hello Everyone,
    I want to transfer Vendor master data between the clients, can any one help me in this Please?
    I don't want to use LSMW, Is there any other method by which i can copy the vendor between the clients or i have to do it manually?
    Please Help ASAP
    Thanks
    M

    Hi,
    You have to do necessary setting for ALE and IDOC will get generated and data will get transfer based on the Program Schedule in Bacground.
    You can schedule program in bacground as per your requirement of IDOC transfer and data generation from One Client to other. [i.e. end of the day, Hourly, monthly etc.]
    Regards,
    Manish

  • Idoc data  comparison between different R/3 clients.

    Hi ppl ,
    Is there a way idoc comparison can be done between different clients without going
    by Segment by Segment comparison ?
    I have a requirement wherein i have thousands of idocs in QA system and i need to
    compare those with the ones in PROD system. The segments in the idocs may vary
    depending on the data that flows from the third party system which will post idocs in R/3.
    So, the segment wise comparison of data is also ruled out .
    Do we have any standard reports which will help in achieving this purpose ?
    Please let me know how the idoc data comparison can be carried out .
    Regards,
    Nick.

    Hi Nick,
    There is no standared tools available for comparing the data of two idocs.
    By using beyond compare s/w you can check the data, but the thing is you have to download the idoc data to file format.
    By using Idoc_xml_transform function module you can download idoc data to xml format, after you can compare.
    Check this
    http://download.cnet.com/Beyond-Compare/3000-2242_4-10015731.html
    Regards
    Ramesh

  • Billing master data - Comparison between systems.

    Hi Gurus:
    We need to compare billing master data between DEV, QAS and PRD to see the differences, since we must normalize the 3 ambients before starting a high impact project in our rates.
    ¿There is any standard functionality that allows me to make this comparison?.
    If not so, was thinking of a customer program (Z) to directly compare the table entries: ESCHS, EKDI, ETRF, TE221, ETTAF, ETTA, ERTFND, TE069, EPREI, etc.
    Comments and suggestions are welcome.
    Regards,
    David

    When I need to compare my Billing tables, I have my Basis guys run SCMP (table compare) and provide them the tables names to use. They have the option to give you only the differences which is nice since that is what I am usually looking for.
    Good Luck!

  • Massive copy of BW transformation between different source system

    Hi all,
    in my BW I have different source systems. I have mapped several objects to one source system.
    Now I need to copy all the transformation to other source systems. These source system are different instance of ECCs, there are the same extractor in all the systems.
    I can't use the BDLS becouse these move the transformations between the system not copy it.
    I try to create a Transport and using the Conversion of Logical System Names but this change only the objects with source sytems dependencies, it don't change the technical name of transformation, and do not create a tranformation to the new system but overwrite the existing one.
    Do you know if there are some program or some procedure to copy transformation between sourcesystem in BW?
    Thanks in advance
    Mario

    Hi,
    you can do a Retrofit (System copy), Generally, retrofit happens between two different BW systems.
    check with your basis team if the retrofit is possible with in the same BW system but for different clients.
    Note : System copy will overwrite all the objects.
    Regards,
    Sudheer

  • Master data transfer between systems

    hey guys,
    we have a 3 system landscape with the following clients:
    DEV 100: golden configuration client
    DEV 200: unit test
    CIQ 100: qa configuration client
    ciq 200: quality/test client
    cip 100: production client
    I have all the clients locked down to "not modifiable for both customizing and repository objects" except the DEV 100 client. One of my analysts wants to make changes to the master data in the unit test client because the master data is not there in the configuration client. Should I open this unit test client for modifications? If I do so, will I need to import the changes to CIQ and CIP through transport method or would those changes be made manually ? any kind of best practices surround the changes to master data ? My main concern is that if I open the unit test client, everybody would start doing development and customizing in that client and the configuration client would go out of sync. Please advise.
    thanks
    VM

    Hi,
    Any master data changes to a "non modifiable" client can be sent using one of the two options :
    1. Transport Request
    2. ALE (IDoc)
    Most probably the master data change he wants to transport requires an ALE setup between the two systems.
    Regards,
    Jovito

  • Master Data synchronisation between two Solution Manager systems

    Hi all,
    does anyone know if it is possible to synchronise master data (smsy, ibase and such) between two Solution Manager systems with standard jobs?
    Thanks!
    Regards

    I asked a likewise question on the OSS earlier and I was told
    "Use MDM" (which is a separate product and must be licensed separately).
    Markus

  • Master data synchronization between SAP systems

    Dear all,
    I have 2 SAP systems and I'm required to synchronize some kinds of HR master data between these 2 systems, how can i achieve that without any ABAP developments?
    Does anyone give me any suggestions or others?
    Best regards,
    Bean

    Hi Bean,
    You can achieve this using IDoc and PI using following scenario.
    1) Populate IDoc in 1st SAP system and pass it to the second system as direct IDoc to IDoc transfer.
    Ex: Basic Idoc Type: HRMD_A07
    2) If direct communication between two XI system is not allowed then you can use PI as middle ware to transfer data.
    But for IDoc you need to create partner profile and ports etc.
    Hi,
    Thanks so much for your kind help.
    How to make the transferring automatically whenever the specified kind of master data is changed.
    Best regards,
    Bean

  • Master data from Multiple SAP source systems

    Hi Gurus,
    In my present project we are having an ECC6 and r/3 from which we need to extract master data.
    ex: vendor
    same vendor has different entities in the systems.
    I am aware of the data inconsistency as it would be overwritten.
    We don't want to use MDM,compounding or transfer duplicate records options.
    MDM - not in use
    Compounding - expensive Option
    transfer duplicate records - not reliable 
    Merging r/3 in to ECC6 is also under consideration but it would be late 2010.
    I am sure some of you might have been through this scenario and your help is appreciated and will be rewarded.
    Thank you,
    Ram.

    We went with Compounding option.
    Can you justify Expensive ????
    We compounded 0LOGSYS,infact you can use 0SOURCESYSTEM.
    So that 0SOURCESYSTEM will have the server details.I mean your ECC6 or R3.
    or
    Some crude solution would be add some character to the beginning of your master data like from ECC 6 append E.
    or
    Have you heard of Consolidated infoobjects Concept.You can go with that too.
    Hope this helps.
    Edited by: Praveen G on Oct 1, 2008 9:04 AM

Maybe you are looking for

  • ToS Preservation with egress remarking on inner packet

    Hi, I am using DMVPN/IPSEC/VRFs. On the egress of the DMVPN/VRF tunnel interfaces, I have applied a Service Policy to remark traffic. Hence the remarking occurs on the inner packet header. Assuming qos-preclassify is NOT enabled. Does anyone know how

  • Static coming through computer line out, PLEK500

    I have three of these working just fine, in this configuration: #1 tied to cable modem #2 tied to ethernet port of a macbook pro #3 tied to a Roku box #4 is meant to serve the Ethernet port on the Mac Pro tower in my home office.  Unfortunately, upon

  • Where are my iCal subscriptions "Christian Holidays"& "Jewish Calendar"?

    I have been using iCal ever since my first MacBook G3.  I find it very useful to keep track of dates and appointments for my business, my family and my daughter.  I have appreciated the subscriptions as well, especially those for holidays.  Unfortuna

  • Minimum permisions required to get Design Console access

    Hi, What are the minimum permissions required by User (expect for checking the Design Console checkbox on user profile) to access Design Console in OIM 11g R1 (11.1.1.5.0)? Ofcourse, we donot want to add the user in System Admin group. We just want t

  • BT Wifi with FON query

    i notice before i log on its states 'other people might be able to see information that you send over this network' so im wonder what exactly people might be able to see (e.g.if you are posting messages on a forum, doing bank stuff, etc) and also how