Master data delta update to data souce not possible

Hi,
0material_att data source delta update failed for a few days from the process chain and when I tried to manually run the delta infopackage, I got this message:
Last delta update is not yet completed
Therefore, no new delta update is possible.
You can start the request again
if the last delta request is red or green in the monitor (QM activity)
I did "manage" for this data source but none of the failed delta run showed in there. I also looked for cancelled jobs in sm37 but nothing came up either. So I ran a full upload without deleting the data as my user is waiting for this fix to be shown in the report. What can I do now to enable the delta run again without deleting the data?
sharon

Hi Sharon,
chk in RSMO for that master data 0material_attr, if there are any red/yellow req. If so change the QM status to RED again and goto IP and trigger the load again (it wil say that earlier delta has failed and if u want to Repeat ;ast delta,) in that give OK and exe the load again.
In some cases, the datasource will not support repeat deltas, in that case do a re-init for the master data load. (no need to delete any datas.)
Hope this helps. If you have any queries please ask.
Thanks!
Dharini

Similar Messages

Delta Update in data Target Must be Deactivated Before deleting the request

Hi Experts,
I got an error while deleting a request from an ODS target. In breaf Let me explain..
Today one data load got failed. The data source 0CRM_SALES_CONT_I ( CRM Sales Contract : Item ) is updating data to 4 ( Four ) ODS targets.
So I forcefully made the request red to delete the request from the targets. But I unfortunately deleted another request without making it RED, I reconstructed it. Everything is looking fine.
   But the thing is , when I tried to Delete the ERROR request from the other two related Data Targets ( 0CRM_CN2P and   0CRM_CNT1) , I fount these warnings..
                --> Request 140522 already retrieved by Data Target BWPCLNT600
                --> Delta update in Data Target BWPCLNT600 must be DEACT. before deleting the request.
                --> Do you want to DEACTIVATE the Delta Update in the Data Target BWPCLNT600   ?
   I clicked on YES.
I am having doubt, will it make any problem in future ? Or How Can I Resolve this problem   ?
Thanks,
Utpal.

Hi shanthi bhaskar ,
Thank you. But the client no which I have mentioned is not our. That is different, I have given for the example. Bur the DS and ODS name are as it is.
   and Shanthi, Won't be any problem as I got the warning as mentioned above.. ?
Thanks,
Utpal

I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?

I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?

From the box the iphone came in:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download fromwww.itunes.com/download)"
You will need Mac OS 10.5.8 or later in order to get itunes 10.5 or later, in order to connect your iphone.

Update for CC 2014 not possible, i need a quick solution. I also cant import anything

Creative Cloud update is not possible, i also can import only once in AE CC 2014.
I`m on Mac Yosemite 10.10.2 the Cloud Manager also shows he cant finish the Update.

Quit Creative Cloud desktop application .
Step 1:
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.( Do not miss ~ symbol)
~/library
3)Then navigate to Application Support>Adobe.
Open Adobe folder and rename AAMUpdater and AAMUpdater-old.
Step 2:
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.
/library
3)Then navigate to Application Support>Adobe.
Open Adobe folder and rename AAMUpdater and AAMUpdater-old.
Then launch Creative Cloud application and check.
Let me know whether it gives blue update button for After Effects CC 2014 ?

Update of CAF GP not possible

I am implementing an example in the Guided Procedures, but after some changes i cannot update a process oder a block any longer.
It runs, but when I want to modifie it, the GP asks to create an inactive version, but stops with the failure ("Versionsaktualisierung nicht möglich" -> english: "version update not possible" or similar).
Is it a bug in the current service release (i think, we have installed until Service Pack 6)?
Thanks in advance!

Sorry for the late answer...
I heard form someone, that this is a problem in the SPS6 and it is solved in the following SPS. If there was no problem at you...be happy

Apple TV 2 reset and update to iOS 5 not possible

I can't upgrade my ATV 2 to iOS 5.0.
I tried both ways described at support.apple.com. At ATV a message says it is not possible.... try again later.
When I connect ATV with a micro USB to my iMac, iTunes 11 does not recognize the ATV, so Im not able to reset it.
Thanks for your support!

Hi George,
thats what I did. ATV does not become visible in itunes.
The support document is based on an older version of iTunes. Is the solution still valid?

Updating Logon Data for Web Service in SICF not possible

Hello, hopefully someone can help me with my problem.
I have created a custom Web Service based on a custom Z Function Module.
This all works fine in our Development environemnt. I was able to go into SOAMANAGER and generate the end point. This created the web service in SICF. I was then able to go into SICF and change the logon data to use our service ID.
All tested and functionaing great.
We then transported everything to QAS. I again went into SOAMANAGER to generate the End Point, and this worked fine, we have the web service now visible in SICF.
The problem now occurs when I go into SICF and try go into change mode to enter the service user in the logon data tab. I get a popup message stating :
"You cannot use this transaction to change the service."
When I click on the long text explanation I get:
"Message SHTTP824
You cannot use transaction SICF to modify this service.
This means that only the application has the authorization to use the defined interface to modify this service."
Does anyone know how to get around this ? Or how to define our logon data using SOAMANAGER ?
thanks
Adrian

the right way to transport logon info along with SICF service is to create an external alias for your BSP and maintain the logon info in the external alias.
other wise you have to open the production system for changes and change it , which may not be allowed.
Regards
Raja

Updated as new installation 613 to 616 iphone 3GS, the 613 backup is nolonger listed, and all data gone. Anyway to restore 613 with data and update keeping data?

I chose new installation instead of update from 613 to 616. The new installation is missing all the data, and app data, notes, etc. The previous backup is nolonger listed, only new one for 616, anyway to restore 613 with data?

A backup was listed for earlier today, I did a backup before new installation. Once new installation, it did an auto backup of new installation, and only this one is listed.
This matches documentation, it says cannot restore to earlier version from itunes. Do I have to do a restore factory settings to see previous version backup, and restore this earlier version?

We have received charges of £350 for data usage on ipad which is not possible as ipad constantly connected to wifi. What is going on???

We have recently received a bill of £350 from our Orange, our mobile phone provider. These charges are apparently for ipad usage which is impossible as the ipad is constantly connected to the wifi in the house. The ipad never leaves the house as it is only ever used by my special needs child. Orange are arguing about this bill and have now reduced it to £50 but we are fighing this charge too! Can someone help? Advice needed!

Make sure that Cellular is OFF. Go to Settings>Cellular Data>OFF
 Cheers, Tom

My computer is old - Windows XP Professional, Service Pack 1. Can I update or is it not possible?

I keep getting a message that my Firefox needs updating, but as I understand it, the system is not supported. What will happen if I don't update? Is it possible to update an old computer like mine?

Does that old PC meet Firefox 10 system requirements as far as the hardware specs?
http://www.mozilla.org/en-US/firefox/10.0/system-requirements/
Pentium 4 or newer processor that supports SSE2
512MB of RAM
200MB of hard drive space
If not, maybe it's time for a new / newer PC?
If so, you really ought to install SP2 and SP3; you'll need to have at least SP2 in the near future for Firefox 12 and later.

Update InDesign Server CC not possible

Hi,
I'm using an InDesign Server CC in Version 9.0 with Windows Server
When i will update to 9.2 or 9.2.2 i got error message:
This patch is not suitable for you. Looking over the menu "Help" of the product to check for updates to get a list of available current updates.
But the InDesign Server is an command-line program without the Help-Menu.
anyone knows the problem?

Post here:
InDesign Server Developers

Updating the software is not possible

Dear HP,
Please help me i cant update my windows 8 to windows 8.1,please help me i just have time till 6:30 PM..i have updated it once and it was working very fine but suddenly my laptop got with a problem that is whenever i switch off the laptop the power key's light was ON for long hours..but i just formated everything and it was good again but now i am facing a diffrent problem i can't installe the previous files and i am not able to update my laptop.
Please its a request to help me with this

Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook and updating the Version of Windows. Here is a link to Microsoft that will help with the Updates. You might need to disable your Virus protection.
I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Master Data Delta Load failing

Hello,
We have a master data process chain that does a delta load of 0MATERIAL_ATTR, OMATERIAL_TEXT etc....
On 3/26/06 at 8:15 pm was the last time this process chain ran successfully.
On 3/27/06 at 8:15 pm the process chain failed on the first step: 0MATERIAL_ATTR (Delta Update) and thus did not process furthur.
The reason the chain failed was because the message server was down, so no BW requests were successful. i have all my other data loads running correctly now. So this Master Data problem is the last mystery I need to figure out.
When I look at the monitor for the failed 0MATERIAL_ATTR (Delta) I see a message that says "Non-updated Idocs found in Source System"
When I click 'Process manually' in the monitor. it says 'incorrect data packets are now updated again'
The chain was attempted to be ran on 3/28/06 at 2:25 pm and it failed again at the same step. The message in monitor this time was 'Sending packages from OLTP to BW lead to errors'
The chain was again attempted to be run on 3/28/06 at 5:06 pm. Again it failed at the same step. the message this time was 'Update mode R is not supported by the extraction API'.
I tried to manually run the infopackage outside of the chain and I got this message when I clicked 'Start'. "the last delta update was incorrect" Therefore, no new delta update is possible. You can cancel the request or: Attempt to load the data of the last delta update again." I click 'Request again' and I get the message: 'Update mode R is not supported by the extraction API'.
All of these loads transferred 0 records and failed.
Any advice on how I can get my master data on track again?
Thanks,
Nick

Hi Nick,
I would suggest that you do a full load to get all the data and then ReInit the process. Since it is master data, the full load and ReInit is possible with no major issues.
Re: Update mode R is not supported by the extraction API
Hope this helps...

Get back the Data mart status in ODS and activate the delta update.

I got a problem when deleting the requests in ODS.
actually there is Cube(1st level. it gets loaded from an ODS(2nd level). this gets loaded from 3 ODS'S( 3rd level). we were willing to delete recents requests from all the data tardets and reload from PSA. but while delting in the request in ODS(2nd level), it has displayed a window, showing as follows.
- the request 132185 already retrived by the data target BP4CLT612.
-Delta update in BP4CLT612 must be deactivated before deleting the request.
- Do you want to deactivate the delta update in data target BP4CLT612.
I have clicked on execute changes in the window. it has removed the data mart status for all the request which i have not deleted.
in the same it happened inthe 3 ODS's(3rd level).
I got clear that if we load further data from source system. it will load all the records from starting.
so to avoid this can any body help me how to reset the Data mart status and activate the delta update.

Hi Satish,
U have to make the requests RED in cube and back them out from cube,before u can go for request deletions from the base targets(from which cube gets data).
Then u have to reset data mart status for the requests in your 'L2 ODS' before u can delete requests from ODS.
Here I think u tried to delete without resetting data mart status which has upset the delta sequence.
To correct this..
To L2 ODS,do an init without data transfer from below 3 ODS's after removing init request from scheduler menu in init infopackage.
Do similar from L2 ODS to Cube.
then reconstruct the deleted request in ODS.It will not show the tick mark in ODS.Do delta load from ODS to Cube.
see below thread..
Urgentt !!! Help on reloading the data from the ODS to the Cube.
cheers,
Vishvesh

Deactivate delta update before deleting the request from ODS

Hi all,
Happy New Year wishes to all.
I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
Request 98888 already retrieved by data target BWVCLNT
Delta update in data target BWVCLNT must be deactivate before deleting the request
Do you want to deactivate the delta update in data target BWVCLNT?
So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
Delta request is incorrect REQXXXXXXX in the monitor
A repeat needs to be requested
Data target still include delta request REQXXXXX
If the repeat is now loaded, then after the load
There could be duplicate data in the data targets
Request the repeat?
After execute changes it is showing only zero Records only.
What is that mean and why zero records it is displaying instead of delta records.
Anybody faces this type of problem please let me know. This is somewhat urgent to me
Thanks and Regards
Satish Chowdary

<i>Hi Satish,
First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
I hope this helps.
Thanks,
Krish
Dont Forget to assign Points.</i>
Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

Master data delta update to data souce not possible

Similar Messages

Maybe you are looking for