Master data DTP IOBJT not active 7.0 SP12 NSP
Good evening everybody,
there is some trouble with the NetWeaver ABAP Trial SP12 when creating a DTP for master data. As soon as I confirm the popup to create one, an error message like this appears: "The target 0ACTIONTYPE (Type IOBJT) is not active
Bye
Peter
Hello All,
I faced the same issue.
The problem is that although the InfoObject is active as an 'InfoObject', it also should be activated as an 'InfoSource' and 'InfoProvider'.
For this, go to the tab 'Master Data/Texts' and give the application component name for the InfoSource and the InfoArea for the InfoProvider. You can see that the check boxes InfoSource with direct update and Characteristic is an InfoProvider will get checked.
I hope this solves your issues.
BR,
- Midhun George
Similar Messages
-
How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar GuntlaHi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P -
Master data medium texts not loaded in table
Hi,
I have this Info Object which had only short texts enabled earlier.
I changed this to enable the medium texts and I am loading the medium texts via a flat file.
This worked fine in the development system and the medium texts were populated in the text table.
However once I moved this object to quality; the medium texts are not getting loaded
I debugged the transfer and update rules and I see that in the Development system, the generated program fills both the short and medium texts. However in Quality, the generated program only fills the short texts and no code exists for medium texts.
Can you please let me know how to resolve this issue?
Thanks,
Sita.Hi,
As our experts said may be ur loading data from othe source also for that object
If it is sure that u are loading data from flat file , u know that that object where it is used , either it is a standard object or custom object(Z object)
if it is standard object then it will be used in different places at that time deleting the data also it is to difficult.
u try once again first select the medium text check box and do the activation of that master data object and move the same to quality and check that medium text check box selection option is appering or not then it is appering
then move the data sorce and Transformation and DTP and load the data and try to see the data.
Thansk & Regards,
Sathish -
Performance credit master data (FD32)--SAP Note 705317
Hi,
When running the FD32 tranasaction,I am changing the credit account and saving the transaction...it is taking quite a long time and going for dump....TIME_OUT error.
The appropriate notes for this problem are 705317 and 9937.
I shall give the details details of the note.
SymptomLong runtimes occur for the reorganization of credit data in SD documents.
This reorganization can occur in two situation:
- You start report RFDKLI20.
- You create or change credit master data in Transaction FD32.
Reason and PrerequisitesIn the credit management, you change assignments in Customizing or create or change
credit master data. The transfer of the changed settings into existing SD documents
requires a reorganization of these documents.
The reorganization is triggered from Transaction FD32 or using report RFDKLI20. Since
the relevant partner function in the credit management is the payer, all open sales
documents for a payer are selectedfor the reorganization.
The selection is performed within function module SD_CREDIT_RECREATE, which is called
from both Transaction FD32 and report RFDKLI20.
The documents are selected according to one of the two following options:1. Partner index VAKPA
The relevant documents are selected via partner index VAKPA. In index table VAKPA,
the system updates all SD documents for a customer number in dependency on the
partner function. All documents for a payer can be determined using index table
VAKPA.
CAUTION: Partner index VAKPA is only updated if the corresponding partner
functions and transactions are activated in Customizing table TINPA. Table TINPA
does not provide any update for the payer partnerfunction in the standard system!
2. Document table VBPA
If the update for the payer is not active in table TINPA, the relevant documents
are selected via application table VBPA. Table VBPA contains the used partners
(customer numbers) for SD documents.
The access to table VBPA with the customer number of the payer requires a long
SAP Note Nr. 705317 07.02.2008 Page 1
runtime because the customer number is not a key field in table VBPA. It might
result in a TIME_OUT.
Solution
Due to the technical conditions described above, there are two possible solutions for
runtime problems in Transaction FD32 or with report RFDKLI20:
1. Activate the update of index table VAKPA for the payer partner function:
Activate the update of index table VAKPA for the payer partner function by
creating an entry with transaction = 0, partner function = RG in table TINPA. You
can use Transaction SM31 for that.
Subsequently, a reorganization of index table VAKPA is absolutely required!! You
can execute the reorganization with report RVV05IVB. Note that all existing SD
documents thus also those ones already closed are indexed again by this report.
Depending on the number of your documents in the system, this can result in a
runtime which is correspondingly long. Therefore test this beforehand in a copy of
your production system!
2. Create a database secondary index for table VBPA:
If a reorganization of index table VAKPA is not possible or not wanted, you can
optimize the access via document table VBPA. For that, create a database secondary
index for table VBPA.
We cannot provide a general recommendation on how you have to define the secondary
index in detail. This basically depends on your dataset.
Use the SQL trace with Transaction ST05 in order to analyze the access onto table
VBPA within function module SD_CREDIT_RECREATE. Then define a suitable database
secondary index for table VBPA according to your analysis results.
For example, you could create the secondary index for VBPA fields KUNNR and PARVW.
Test the new secondary index by creating an SQL trace with Transaction ST05 again
in order to check the effectiveness of the database access and the runtime.
Also take the related notes into account.
Use Note 99937 to avoid the automatic reorganization - and thus runtime problems - in
Transaction FD32. Note that this does not solve the runtime problem during the
reorganization in general, but shifts it to RFDKLI20 which you can schedule as a job.
Thus, you are not disturbed by the runtime problem.
Please can anyone help me as to in which table and what fields i need to take to create secondary index.Thank you,
madhu.Hi
Instead of creating Indexxes u contact basis to increase the the time limit for the execution
Regards
Shiva -
Master data loads Request not updated to any data target using delta
When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PMHi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM -
Master data object business content activation
Hello ,
How to activate business content for master data ingoobjects . Like 0p_plant .
I activated PP cube and just want to proceed now for masterdata with out missing it's attribute .
Should I drag infoobject and select dataflow before , Is it correct method ? But in this case , I am getting so many other object which i don't want .
I only want to activate master data object , ( it's datasources , transferrule , update rule and infopackage if possible )
PLease suggestHi Akshay,
you can very activate the object of your own choice by simple drag and drop.
Howcver, this is usually not recommended as you might miss objects which are very important in the data flow.
Apart from this you can also make selections of the objects from all the object included due to the option " before and after data flow" by checking or unchecking them while installing your content.
Regards,
Tapish -
Master Data Attribute is not getting reflected in the Cube?
Hi All,
I have loaded the data from ODS to the cubes for customer master and it contains a lot of navigational attributes
for instance :
master data for customer in development is
customer customer group 5(nav attributes) Customer pricing group
1001 HAW IE
And hence when i load the customer 1001 from the ods to the cubes i can see the customer contains navigtional attributes for customer pricing group but CUSTOMER GROUP5 doesnt gets displayed in the cube.
I check the master data it contains the values for customer group. How to Rectify this issue?
Pls advise me!!
Thanks
Poojahi all,
I have explicity clicked on the navigational attributes in the cube i can see the values for the other navigational attributes being displayed in the cube for customer master but then only one navigational attribute is not getting displayed.
For instance
customer, customer gp2, customer grp5
100, nr, nv
only customer grp5 is not getting displayed which has values in the master data but then customer grp2 along with customer is getting displayed.
Thanks
Pooja -
Master data: Text is not getting displayed
Hi Experts,
There is one Infoobject 0EMPLOYEE..It is the master data.I am loading the attributes and texts for the same..I am loading this object thru Direct Update.When I go in the Maintain Masterdata...there I am not able to see the text..I have selected Medium Description..But text is there in the T table..
Please help me out as what can be the problem..
Thanks,
Shalaka.Hi Shalaka,
You need to activate that particular master firstly, inorder to make the changes reflect in the maintain master data.
and as you are saying the text text is visible in Report,so it might
be a problem of refreshing as well.
Regards,
Umesh. -
Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT
Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta SalpeHi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe -
Find ODS's with data that is not activated
Hello,
Does anyone know a systematic way to find ODS objects containing data loads that are not activated?
we are working on a system upgrade and this is one thing that we have been asked to identify.
Thanks,
NickHello,
I found something that will work.
In RSA1 I clicked on the 'Modelling' tab in the left pane.
I then clicked on the 'Status Overview' and I was able to review the ODS's there.
Thanks,
Nick -
Data source is not activated!!!!
Hi Friends,
Currently we are workig on BI 7.0 version and trying to upload flat file data. We have created Datasource for Flatfile source system and activated ( 100% sure about activation). But when we trying to give selections for the Fields in the infopackage screen it was saying the above said Datasource is not in Active version ( Even thoug that was activated properly).
We are wondering about this in the data souce tree it was cleary showing as activated , but in the infopackage it was stating that is not activated.
Please look into this one and give your valuable suggestions.
Thanks in advance...Solved by own
-
IDOC:Master Data Records are not going to be updated after posting the IDOC
I need to create employee Master data records in R/3 .I am using the IDOC HRMD_A07, though the IDOC posting is successful no tables, corresponding to employee master Data are getting updated,
Can anybody plz Let me know the possible reasons and solutions for this?
Thanks in Advance,
Sandhyahi i hecked the job log entries in SM37 in source system, the idocs were returned with '0' records. i took the Idoc number and checked in BD87 it displays some logs in that one node shows the red status with the detail as follow IDoc entries in tRFC queue 3383
the next one is green Data passed to port OK 1
i selected the red staus node and clicked 'process' button but it displays as
The operation cannot be carried out with this node type
wht should i do now, wht may be the reason for the datasource not pulling the data from R/3 to BI? -
Master Data Loaded but not able to see.
Loaded master data successfully. Able to see it in P and M table, but not able to see when going thru Manage - Contents at InfoProvider level.
Many requests are available showing number of records Transferred and Updated.
What could be the possible reason?Hi Sarabjit,
Welcome to SDN!!
You need to load the transaction data into the Info-provider to see the contents and not just the master data.
In case you have done the transaction load then you need to do the "apply hier/attr change" for the master data loaded. Goto RSA1 -> Tools(menu) -> apply hier/attr change -> Seelect your info-object and execute.
Bye
Dinesh -
For 0PS_C02 cube Project System - Dates update rules not activated!!
Hi All,
When we are trying to install update rules from the BI content for PS module for the cube "0PS_C02 Project System - Dates", the
update rules are not activating. under the cube when BI content activation. What is the issue in activating the update rules from BI content. From BI content the available version objects only will be activated i think. Please rectify and resolve the same at the earliest friends.
thanks,
SakaliHi,
Try to activate through program RSAU_UPDR_REACTIVATE_ALL. -
Master data infoobject values not presneting in the report
I have one infobject.that contains 50 values.
If i open the query desinger and in dimension if i open my infobject i can see only 30 records only,,,
how can i get 50 records?
master data is activated.......if i am trying to activate it shows as alearady masterdata is activated
RegardsHi,
Activation seems to be the issue:
use the below program
RSDDS_AGGREGATES_MAINTAIN.
Simply give the Infoobject name which you want to activate and execute.
Reward if useful
Manish
Maybe you are looking for
-
How to capture changed data at ALV screen
Hi ALV Experts, I am using Following method for ALV display :- CALL METHOD g_alv_grid_0200->set_table_for_first_display EXPORTING i_bypassing_buffer = 'X' is_layout = it_toolbar_excluding
-
Solid State Hard Drive Replacement For HP ENVY TouchSmart 15-j053cl?
Hello there, I want to swap out my current 1TB harddrive from my year-and-a-half old HP ENVY with a 500 GB solid state harddrive that I just purchased from Amazon. Two questions: 1) Is this solid state harddrive compatiable with my computer (specs be
-
SP execution undefined error - saga continues
Hello all. I am aware that this problem has been discussed widely, but I haven't seen anyone mentioning the configuration I am using. I have employed everything said since othe toppic has been discussed on. Windows XP on all machines. All machines ha
-
"Import to Library" does not work
I choose "file" -> "Import to Library.." and get no response. Any idea why?
-
Can you transfer files from a window based back up hard Drive to a mac ?, example word files , iTunes, picture files thanks