Master data error in RSA5

Hi,
WHEN I go to RSA 5 SAP R/3>Lo> Access any of the master data object eg:-0material_attr giving the followingerror
DataSource 0MATERIAL_LGEN_HIER; switch to package ROMD is off

Hi Priya,
In RSA5, u can assign the datasource to any package or u can leave there and can reassign in RSA6. First goto RSA6 and see whether its available there or not ? If it is available u can change or assign to any package by clicking object directory button.
U can do it for 0MATERIAL_LGEN_HIER also..
Hope it helps...
Regards,
ARK
Message was edited by:
abc abc

Similar Messages

Missing authorization check to display master data error..

Hi,
We are in SRM7.0.
After adding content in my shopping cart, I am trying to change the Account Assignment in the Item Details from Network to Cost Center or GL Account.
Under Item Overview, after changing the Account Assignment to Cost Center, I go to "Assign Number" to add a Cost center..On clicking the matchcode search box, I get selection entries like Cost Center, Controlling area etc..If I click on the Search box without keying anything, I get a "Missing authorization check to display master data error".
I get the same error, when I try to select Assets under Account Assignment area and use search under Assign number. I dont get any errors on searching networks.
Am we missing any authorization check in the backend ?
Regards,
Rajan.K

Hello Rajan,
You could use transaction ST01 in SRM to perform some 'authorisation' trace.
It might give you some pointers to the issue.
Regards,
Franz

Payroll period does not correspond to master data error in INLK run & soln

Dear All,
Just wanted to share this Issue and solution which i found after debugging.
I am not sure it is 100% correct.
I am working on indian payroll and was doing lagacy data transfer with INLK schema
i was used to get error '2 payroll period does not correspond to master data'
and this was for only new joinees in that period .what i found out after debugging is
for e.g. employee is hired in 03.06.2011 .and record in t558b is
90300035 1 2011 1 2011 3 01.06.2011 31.06.2011
where 01.06.2011 is a for period begin date ,
now in payroll program this is being checked with joining date in following subroutine check_aper_versus_t558b
so it ends up with above error.now if i go and change 01.06.2011 to 03.06.2011 in T558B then payroll will be successful.
I dont no whether this is right approach but this removed that error.Just wanted to share so
It might help the members.

la diferencia es la fecha del campo FPBEG que debe ser la fecha para los empleados que no esten con el año o periodo completo
the difference is the date field FPBEG Table T558B to be the date for employees who are not full with the year or period

MATERIALS MASTER DATA ERROR

HELLO SIR,
I AM GETTING AN ERROR WHILE CREATING MATERIAL MASTER DATA IN MM01.
IN BASIC DATA 1 THE BASE UNIT OF MEASURE IS SUPRESSED. I CANT ABLE TO ENTER THE OPTION.
SO FOR THAT I CANT ABLE MOVE FURTHER.
PLEASE KINDLY GIVE ME THE SOLUTIONS...

Hi,
Please check any documents created or the material or any transacctions.if any transaction is done over the material base unit of material can not be changed.reverse all the transactions happened over the material and try change.Or try to provide alternative unit of measure and its conversions in the UOM tab in the material master.
Regards,

Vendor master data error - check issue manueal

Hi all,
i got the following message when i create vendor master data, same message as error when i try to post manual check.
" Changes for vendor 500011 not yet confirmed
Diagnosis
The change to sensitive fields of vendor 500011 have not been confirmed yet.
Procedure
You can confirm the change with transaction FK08."
could any one give me the solution ple
thanking you

Dear,
If the "sensitive field for dual control(vendor) " is defing in IMG under "preparations for creating vendor master data, then when you creating the vendor master data, the confirm is necessary. the responsible person could help you to confirm it via FK08.
With Best Regards,
Gladys Xing

Delta loading master data errors in source system Message RSM340 quality

Hi,
I'm trying to load with delta master data for standard data sources.
In dev, everything seems fine.
I' ve transported the same elements to QA. I've done init, it is ok. I do delta, I get red status: Errors in source system, message no. RSM340. I've tried to put my delta on green, I've remade my init, I've reloading with delta, and I get the same problem.
I have this problem for all master data loading.
Should I install some infoobject from Bi Content?
Thanks a lot !

Hi,
Check following threads
[3003 + R3299 + RSM340] error messages loading an ODS
Extraction failed with error Message no. RSM340
BW Data Loading - Delta Processes
Thanks and regards
Kiran

Master data error - when switching an attribute to navigable

Hi,
I have a serious problem on a master data. I have this master data that until yesterday did have not a problem.
Now, when I add an attribute not navigable (DIS), no problem. When I switch to DISPLAY and activate, following error occurs:
Error in activating the InfoObjects
Characteristic 0FS_CTR_NO: The attibutes SID table(s) could not be filled
Error in BW:
Error when activating InfoObject 0FS_CTR_NO
Characteristic 0FS_CTR_NO: Error when generating master data routines
Error when resetting InfoObject 0FS_CTR_NO to the active version
I tried to make this modification also directly in Quality without transport, and the error is the same.
Master data is empty, so I cannot understand why there is a problem with SIDS.
Any suggestions?
Thanks,
Gianluca

Hi,
as Raj said, when infoobject attribute is changed from dispaly attribute to navigational attribute there will be impact.
check this thread.
Link: [Error when activating 0MATERIAL after adding Navigation attribute]
Regards
Daya Sagar

"Error reading crrdit master data " error in Contract management(CRM 2007)

Hi All,
In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
Any suggestion on how to solve this issue.
Regrads
Nikhil

Hi All,
This is resolved.
Just set the entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
Regards
Ankit

Master data error

hi
what is the solution,when master data is sent to cube
with out check marking ignore duplecate data records at infopackage level.
thanks in advance....
points will be assigned

No error while loadng the cube.
But when you are loading the master data object, you would get errors if there are duplicate entries. In that case check the box.

Huge number of Master data errors

Hi All,
I have a situation. Actaully in our project data records with special characters for master data (0CUSTOMER here) are being edited every day and manually loaded. (note: no provision of RSKC). what happened a day back is unknowingly someone triggered a full load and data with error records from Day 1 is now there till the PSA along with the latest data. now untill and unless the data is corrected and reloaded new data won't get updated. So can anybody please suggest me the quickest way of getting out of this mess. I mean to remove the old data which is already there and get the latest data only from the PSA. Otherwise i need to manually correct around 7000 records!
Please help. Do tell me if you need more clarifications.
Thanks in advance!

Hi
If it's possible speak to business poeple if they want that invalid characters.If they say yes then allow into BW on RSKC.
Just delete reuest and goto PSA and update datatarget immediatly.
Regards,
Chama.

Master data error while loading data

Dear Masters
Im getting below error while loading delta update for master data(Attr) through infopackage to only PSA. Im in BI 7.0
When I checked Error message, Im getting 2 errors. They are
1) Update mode R is not supported by the extraction API
2) Error in source system.
I checked source system is fine. im getting data also in RSA3
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
Could you please help me to resolve this issue.

Process chains might fail if the data source is not in sync between the source and the BW system. In such a case, go to the 'Source Systems' in transaction RSA1, find the datasource, right click and select 'Replicate Datasources'. Once this is done, the transfer structure needs to be activated as well. To do this in production, run the report RS_TRANSTRU_ACTIVATE_ALL with the source system name and the infosource name. This will activate the transfer structure.
NOTE: For master data using direct upload the infosource name is the name of the info object itself.

0PLANT_ATTR Master Data error

Hi Experts
I have an issue loading 0PLANT_ATTR master data.
Some records in PSA are ok but the others give the error:
'No local currency found for plant 1601 and sales organization 1720'
I have made the correct steps when loading (a) Company code master data, b) Sales organization master, data, c) Plant master data).
I have check the 0SALESORG master data, and the currency 'BRL' for the sales organization '1720' exists in TCURR table - recently transfer gloabal settings/currecy again -.
I see this issue several times in the forum but not one give the solution!
Could somebody help me please?
Thank you in advance!!

Hi,
Have you checked note 750322. Look at the 3rd point in it.
regards,
Murali.

Regarding the Time dependent master data error

Hi Masters,
        I've loaded the time dependent master data from flat file only two fields. When I checked that corresponding characteristics in maintain master data, that contains by default from date 01.01.2007and to date 31.12.9999 this date also. Could you please help me to rectify this error.
Thanks in advance
Raja.S

Hi Antonino La Vela
      I have 2 Project Manger and in different duration for different project.
Following datas are my data in Excel sheet.
PM Name                    To date             From Date           Costcenter
Ragunath                    01.09.2007        01.06.2006           Project name1
Ramana mani              01.02.2008         02.09.2007          Project name2
while loading above data, I'm getting following data in maintain master data
PM name                   To Date             From Date           Costcenter
                                 31.12.9999         01.01.1000
Ragunath                   31.05.2007         01.01.1000
Ragunath                   01.09.2007         01.06.2007            Project Name1
Ragunath                   31.12.9999         02.09.2007
Ramana mani             01.09.2007          01.01.1000
Raman mani               01.02.2008          02.09.2007           Project Name2
Raman mani               31.12.9999           02.02.2008
Could you please help me, how this unnecessary datas are loaded by default?
Thanks in Advance
Raja.S

Loading master data : error invalid characters

Hello,
I load master data (example 0PROG_POS) into BW with InfoPackage and loading stops with error "invalid characters". In the logs, the error is due to a special character (in french Ä : a special A).
On BW side, is it possible to solve this problem (I don't understand the message in the help : "If this message appears during a data load, maintain the attribute in the PSA maintenance screens").
My BW is 3.5 patch 7
Thanks in advance for your help.
Daniel.

HI Daniel
all characterstic & special characterstic
goto TCODE: RSKC -> all_capital-> F8
again : rskc-> !"%&'()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXY ->F8
GOTO SE11: RSALLOWEDCHAR (maintain special characterstic)
also u can goto-> SE37->RSKC_ALLOWED_CHAR_GET
-> F8
THANKS & BEST REGARDS
SANGRAM KESHARI SUTAR

Load customer text master data error

Hi Experts:
When load customer text master data ,system show the following error message ,could you please
help me to solve the problem , thanks a lot
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.

Delete PSA request from Datasource -> manage
Do a fresh load and Goto to infopackage monitor
Environment --> Short Dump --> in Source System...... Click 'TODAY'
Next screen would show u all Runtime Error... Double click on the first one
from the next screen, u can do analysis by double clicking 'What Happend ?', What can u do? Error Analysis..
By doing this U can find out what exactly is the problem

Master data error in RSA5

Similar Messages

Maybe you are looking for