Master data Extraction and Repeat delta
hi Expert's I am extracting master data from R/3.These are Delta loads.Now when I started extracting it is pops up message stating earlier request is not correct so repeat must be done.could any one of analyse the problem and give the solution.I also dont know how to do repeat delta.Plz explain with steps.
Thanks in Advance.
vasu.
Hi Vasu,
Goto Manage, Select the Request and make it red(See below how to make it red), then click on the Monitor icon(just side to it). It will take you to Monitor screen.
here select the particular load, on the right side, on the status tab, click on the load and make it red.
Now goback to the infopackage, schedule, it will do repeat delta.If the Problem still persist, then delete the Requet in the Manage screen and schedule again. This should work
Regards
Vj
Similar Messages
-
How to find all the Master data extract structures and Extractors
I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
Question: How to get a complete list of all Master data extract structures and corresponding extractors?
Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
Regards
SasankaHi,
try the table ROOSOURCE and search the data source with string in astrick attr for master data and for text with text
This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
Thanks
Ajeet -
Master Data Extraction-Questions
Hi guys,
I was referring SAP materials on Master Data Extraction...then I read something like...
"In Master Data Datasources,some support delta and some donot.Out of those that support delta mechanism,some use DELTA QUEUE.Some donot use DELTA QUEUE functionality and it is generally incase of small volumes of Data.Then there are some other datasources which uses ALE CHANGE POINTERS for delta mechanism."
1.Can anyone explain how can one do delta in case of small volumes of data without using DELTA QUEUE functionality?Whats the need to go for it when we have DELTA FUNCTIONALITY?
2.How to do delta using ALE Change Pointers?Whats the need to gofor this when we have DELTA QUEUE functionality?
Thanks in advance.
Regards
SchandHi Des,
I think you are explaining the difference between "Delta Update" and "Delta Queue".I am well aware of these two things.
DELTA QUEUE---its a temporary storage for delta records in R3 system before they are loaded successfully into BI.
DELTA UPDATE---its type of delta update of delta records from R/3 system to BI system.
My QUESTION is:
In both MasterData Datasources and Transaction Data datasources,some support delta and some donot.Usually delta records will be stored in DELTA QUEUE in ECC before uploading them into BI.But some MASTER DATA DATAOURCES,donot use DELTA QUEUE to store delta records in ECC before uploading them into BI and they do this in case of small volumes of data.then Do any of you know,how do they do if they are not using DELTA QUEUE?
Second one,SAP materials mentioned,some other datasources use ALE change pointers to determine delta.In this case also,they donot use DELTA QUEUE to store delta records before uploading into BI.What are ALE change pointers?How do we make settings for this?
Hope I explained better.
Regards
S -
Vendor Master Data extraction???
Hi,
I need to extract Vendor Master Data from SAP into a flat file.
The format should be similar to file input required for the Vendor Master Upload program: RFBIDE00.
Is there any program which can be used to extract the data in the required format?
Any help is appreciated.
Thanks and Regards,
Varunhi varun,
check this link..
<a href="http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/vendor-master-data-extract-from-r3-to-flat-file-944432#">VENDOR MASTER EXTRACTION</a>
<b>dont forget to mark helpful answers..</b>
Message was edited by: Ashok Kumar Prithiviraj -
Master data extraction from APO BW to BW BW
Hi Gurus,
I am having a task to extract data from Demand Planning Infocube in APO BW to the Custom Infocube in BW-BW. My question is how do we get the master data (texts and Attributes) for APO-Material and APO-Location (Plant in BW) from APO BW to BW-BW. Any insight into this please.....check this
master data for demand planning -
Master data extraction from SAP ECC
Hi All,
I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.Hi All,
i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
Please find the screenshots.
I did an Environment -->Check connection and found the below, -
Hi Experts,
As per my BW report requirment i need to extract
Position ID
Position Name
Position Status (Occ,Unocc,Obsolete) *
FTE
Staff ID
Staff Name
Staff FTE
Pay Scale Group
Pay Scale Level
Position Reports To
Organisational Unit
Date Selection
Start Date
Posts Reporting To Position
from HRP1011,HRP1001,HRP1000,PA0002 & PA0007 Tables
Taking all those fields from HRP1000,HRP1001.......etc these are all the tables of Organizational master data which is one of the HR structures where HR people will design the organizational structure of the define and in that organizational structure they define org unit (org id which is represented by object type O),
Position id (position which is represented by object type S,
staffing is when they do the reporting then who is subordinate of whom
if you see tcode ppome (r/3) you can see all these fields this belongs organizational master data. i hope i cleared your doubt
So my question is if i extract this data by developing a custom defined data source based on view to which object (Org,Position,Staff) i need to lood this data
I mean as attributes
ThanksHi,
To provide you with further information
i need the following data in my BW report
HRP1000 - OBJID, OTYPE, STEXTBEGDA
HRP1007-STATUS
HRP1011-SOBID, RELAT
HRP1005-TRFGL
PA0002 NACHN, VORNA
<b>PA0007 - WOSTD ( Number of hours per week)
HRP1011 - MOVAG (Number of hours per month)</b>
Some one in HR Fourms told me that these tables are master data tables and i am reporting on master data
So Anil,Quick question if the data i need is master data can i use the cube u suggested
Please update me on this
Thanks a lot -
Master data extraction BW 7.0
In Master data extraction of 0PERSON_ATTR one record in the PSA is getting duplicated inside Error Stack as many times as we run the PSA dataload.Because of this Error mssg is displayed as Dates overlapped.
Hi,
In error stack check, which records are getting duplicated and whether the same date is avialable in both the record ( since message is overlapping dates). if it is you can check with psa and manually correct the records in error stack.
create a error DTP( you will find this option in existing DTP). and schdule this to load the corrected records from Error stack.
rgrds,
v.sen. -
Master data Full load to Delta load
HI
I have Order number (ZONDRNO)for this we are loading the Master data form BW to BW full load.
This Order number is Generi Data source
Can any one help me how to do master data Full load to Delta load.
Thanks in Advance
kumar
Edited by: kumar reddy on Oct 9, 2008 3:14 AMHi,
Firstly you are stating that you are loading from BW to BW. How are you doing it ? Are you doing through a datamart ?
Secondly you have also told that you have created a generic datasource so from this we can deduce that you are not doing a datamart load but you are doing through a datasource.
Thirdly to achieve delta for a generic datasource you should make sure that the datasource in question here is delta enabled.
Once all these are done all you need to do is a delta init and schedule further delta loads.
Regards,
Pramod -
Hi Experts,
I am doing MAster Data Extraction, i have done with major works in R3 Side, but i am facing as issue while distributing the Mode,
Before that i brief the things what i have done,
1) ALE Configuration in ERP R3 System
2) Created a New Logical System for Receiver PI System
3) Created the Logical System for Sender R3 System & Assigning the Client
4) Configured of RFC Destination Pointing to PI System
5) Configured of Communication Port
6) Configurated of Partner Profile
7) Created ALE distribution Model/Customer Distribution Model
After creation of the Model i ahve added the Message type. Then Partner Profile needs to be generated and the Distribution model needs to be distributed from the Edit Menu.
But while doing the above step i am facing a issue as " No Messages have been defined for the selection conditions in the model".
Please do needful.hi,
if you''re a PI started I'd suggest:
http://www.sap-press.com/products/Mastering-IDoc-Business-Scenarios-with-SAP-NetWeaver-PI.html
chapter:
3 ... Master Data Distribution ... 95
for a good start
Regards,
Michal Krawczyk -
How to do the CRM Product Master Data extraction?
Hello guys,
I have to upload the CRM Product Master Data from a CRM 6.0 system to a BI 7.0 system.
The only information that I have is the infocube in the BI for the extraction is 0CRM_PROD.
I've checked that the CRM Product table COMM_PRODUCT and found that entries in the table and the infocube don't correspond to each other exactly. I also cannot find approprite DataSource in BI or CRM system for the data transfer.
Who can telll me anything about this kind of master data extraction to BI?
Thanks in advance.
Best RegardsHi,
u tried using the generic extraction using rso2.create one datasource and give the table name comm_prod.
bye. -
R/3 master Data Extraction
Hi Experts,
Could you please send me document relating to R/3 Master Data Extraction to BW.
Could you please provide me detailed description and steps involved in extration of master data from R/3 to BW
Thanks and points will bbe awardedHi,
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
FI-CO 'Data Extraction -Line Item Level-FI-CO'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
Please reward points. -
Dear all,
Can anyone help me with how to paper about CRM Master Data Extraction? I need to know on how to extract Business Partner and its attributes (Relationship, Address and others), also on how to extract CRM Marketing Attributes for Business Partner.
Thanks for your help.
RickyHello Ricky,
I haven't found any conclusive document about loading Business Partner from CRM 4.0 to BW 3.5. If there is someone out there who knows about that documentation I would really appreciate it.
Here is what we did regarding BP relations, marketing attributes and addresses:
1. Marketing attributes:
These data type is difficult, because you have to build a special extractor for each marketing attribute group. And because Marketing attributes cannot be transported, you cannot transport the extractor. This poses a big problem in many projects. Therefore we solved it by creating some view extractors on the appropriate CRM tables: AUSP, CABN, KSML, KLAH. I can give you some more details, if this will help.
2. BP relations:
We build a view extractor for this too, because it was much easier to extract the data from BUT050 and BUT051 than trying to find out, how the business content extractors do their work. Using this extractor, we build some special ODS and InfoCubes for the relations we were interested in.
There is Business content for BP relations, but we kept to the generic extractors, because they were easier to verify.
3. BP adresses:
We use 0CRM_BPDEFADDR_ATTR to get the primary address.
We use 0CRM_BPART_ATTR to get BP master data
We use 0CRM_BPART_TEXT to get BP text.
We have only about 300.000 BP in CRM, so we do a full update everyday.
I am not sure, if these three data sources are part of the current BW 3.5 business content, because we started with BW 3.0 and did not check for BC updates.
Kind regards,
Jürgen
Message was edited by: Jürgen Kirsch -
Master data Extraction in BI7.0
Hello Gurus,
I am new to BI 7.0. I would like to know the steps of Master data extraction from ECC 6.0. to BI 7.0 I tried but as the transformation is different than BW3.5 I am not sure what exactly to do. I was trying to extract 0PROFIT_CTR & 0CO_AREA Master data..... Any other Master data example would be fine to. If anybody could explain in simple steps the above process, would be appreciated. Points will be awarded.
Thanks
SujayRoutines can be added in Transformation step -6
1. Create the infoobjects you might need in BI
2. Create your target infoprovider-Infoobject
3 Create a source system
4. Create a datasource or use replicated R/3 datasource
5. Create and configure an Infopackage that will bring your records to the PSA
6. Create a transformation from the datasource to the Infoprovider
7. Create a Data Transfer Process f(DTP) rom the datasource to the Infoprovider
8. Schedule the infopackage
9. Once succesful, run the DTP to get data from PSA to Infoobject
10. Check Infoobject for data
<b>Loading Infoobject using Flat-File</b>
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
Hope it Helps
Chetan
@CP.. -
Abt master data activation and attribute change run
There is any difference between master data activation and attribute change run
Hi,
Master data activation is activating the master data once you extract the data from source system the data will be in inactive state, so in order to make the data available we will activate the master data.
Attribute change run :Its used to update the newly changed master data records to the Hierachies and aggregates.
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case we will use attribute change run.
For attribute change run we have direct tcode: RSATTR or In the main menu, choose the path Tools Hierarchy/Attribute Change.
regards
KP
Maybe you are looking for
-
GR/IR Clearing Account for Material & Asset
Hi, We want to maintain different GR/IR Clearing Account for Materials & Assets. Pls. guide. Regards,
-
Why would I get a bright green vertical line down the middle of my screen after playing a game?
-
MD04 - not getting updated, PR to PO conversion
Hi, We converted PR to PO in MD04 for whole quantity, ideally PR line should get replaced by PO line. 1. But PR line still remain in MD04 screen, PO line is added to MD04 screen 2. Am able to create more PO's for the same PR 3. PR lines goes off, if
-
Migration of Marketing Attributes from other system
Hi, We want to migrate the Marketing Attributes from non-SAP CRM system into SAP CRM system. But the concern is if some of the customers have visited our website and changed some attributes, like hobbies or job position, the new attributes will be th
-
"Exception in thread "main" java.lang.UnsatisfiedLinkError:" JNI in Linux
Hi, I am writing a simple program to understand how JNI works so that I can use this concept to develop a project. But after running the simple code, It gives the following error: Exception in thread "main" java.lang.UnsatisfiedLinkError: sum at Test