Master Data Extraction Error

Hi Experts,
I am doing MAster Data Extraction, i have done with major works in R3 Side, but i am facing as issue while distributing the Mode,
Before that i brief the things what i have done,
1) ALE Configuration in ERP R3 System
2) Created a New Logical System for Receiver PI System
3) Created the Logical System for Sender R3 System & Assigning the Client
4) Configured of RFC Destination Pointing to PI System
5) Configured of Communication Port
6) Configurated of Partner Profile
7) Created ALE distribution Model/Customer Distribution Model
After creation of the Model i ahve added the Message type. Then Partner Profile needs to be generated and the Distribution model needs to be distributed from the Edit Menu.
But while doing the above step i am facing a issue as " No Messages have been defined for the selection conditions in the model".
Please do needful.

hi,
if you''re a PI started I'd suggest:
http://www.sap-press.com/products/Mastering-IDoc-Business-Scenarios-with-SAP-NetWeaver-PI.html
chapter:
3 ... Master Data Distribution ... 95
for a good start
Regards,
Michal Krawczyk

Similar Messages

Master data extraction from SAP ECC

Hi All,
I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.

Hi All,
i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
Please find the screenshots.
I did an Environment -->Check connection and found the below,

Master data extraction BW 7.0

In Master data extraction of 0PERSON_ATTR one record in the PSA is getting duplicated inside Error Stack as many times as we run the PSA dataload.Because of this Error mssg is displayed as Dates overlapped.

Hi,
In error stack check, which records are getting duplicated and whether the same date is avialable in both the record ( since message is overlapping dates). if it is you can check with psa and manually correct the records in error stack.
create a error DTP( you will find this option in existing DTP). and schdule this to load the corrected records from Error stack.
rgrds,
v.sen.

Vendor Master Data extraction???

Hi,
I need to extract Vendor Master Data from SAP into a flat file.
The format should be similar to file input required for the Vendor Master Upload program: RFBIDE00.
Is there any program which can be used to extract the data in the required format?
Any help is appreciated.
Thanks and Regards,
Varun

hi varun,
check this link..
<a href="http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/vendor-master-data-extract-from-r3-to-flat-file-944432#">VENDOR MASTER EXTRACTION</a>
<b>dont forget to mark helpful answers..</b>
Message was edited by: Ashok Kumar Prithiviraj

How to find all the Master data extract structures and Extractors

I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
Question: How to get a complete list of all Master data extract structures and corresponding extractors?
Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
Regards
Sasanka

Hi,
try the table ROOSOURCE and search the data source with string in astrick attr for master data and for text with text
This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
Thanks
Ajeet

Position Activity Sequence Resulting in data extracting error

hi gurus
can any body tell me what is this position activity sequence error resulting in data extracting error, plz help. this is very high priority for me.
regards
dev

I rebuild the report using a tabular form and populated the primary key with a PL/SQL expression and now it appears to be working. P1_ISSUE_NO is the primary key on the issue table and I could not figure how to get it in the issue_no field of the tabular report when a new line was entered I ended up putting the following code in for the default for
issue_no on the report:
Begin
return :P1_ISSUE_NO;
end
It works great.

Sap bw 7.3 master data load error

sap bw 7.3 master data load error
erroe: Exception in Substep Rules

Hi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan

Master Data Extraction-Questions

Hi guys,
I was referring SAP materials on Master Data Extraction...then I read something like...
"In Master Data Datasources,some support delta and some donot.Out of those that support delta mechanism,some use DELTA QUEUE.Some donot use DELTA QUEUE functionality and it is generally incase of small volumes of Data.Then there are some other datasources which uses ALE CHANGE POINTERS for delta mechanism."
1.Can anyone explain how can one do delta in case of small volumes of data without using DELTA QUEUE functionality?Whats the need to go for it when we have DELTA FUNCTIONALITY?
2.How to do delta using ALE Change Pointers?Whats the need to gofor this when we have DELTA QUEUE functionality?
Thanks in advance.
Regards
Schand

Hi Des,
I think you are explaining the difference between "Delta Update" and "Delta Queue".I am well aware of these two things.
DELTA QUEUE---its a temporary storage for delta records in R3 system before they are loaded successfully into BI.
DELTA UPDATE---its type of delta update of delta records from R/3 system to BI system.
My QUESTION is:
In both MasterData Datasources and Transaction Data datasources,some support delta and some donot.Usually delta records will be stored in DELTA QUEUE in ECC before uploading them into BI.But some MASTER DATA DATAOURCES,donot use DELTA QUEUE to store delta records in ECC before uploading them into BI and they do this in case of small volumes of data.then Do any of you know,how do they do if they are not using DELTA QUEUE?
Second one,SAP materials mentioned,some other datasources use ALE change pointers to determine delta.In this case also,they donot use DELTA QUEUE to store delta records before uploading into BI.What are ALE change pointers?How do we make settings for this?
Hope I explained better.
Regards
S

How to do the CRM Product Master Data extraction?

Hello guys,
I have to upload the CRM Product Master Data from a CRM 6.0 system to a BI 7.0 system.
The only information that I have is the infocube in the BI for the extraction is 0CRM_PROD.
I've checked that the CRM Product table COMM_PRODUCT and found that entries in the table and the infocube don't correspond to each other exactly. I also cannot find approprite DataSource in BI or CRM system for the data transfer.
Who can telll me anything about this kind of master data extraction to BI?
Thanks in advance.
Best Regards

Hi,
u tried using the generic extraction using rso2.create one datasource and give the table name comm_prod.
bye.

R/3 master Data Extraction

Hi Experts,
Could you please send me document relating to R/3 Master Data Extraction to BW.
Could you please provide me detailed description and steps involved in extration of master data from R/3 to BW
Thanks and points will bbe awarded

Hi,
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
FI-CO 'Data Extraction -Line Item Level-FI-CO'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
Please reward points.

CRM Master Data Extraction

Dear all,
Can anyone help me with how to paper about CRM Master Data Extraction? I need to know on how to extract Business Partner and its attributes (Relationship, Address and others), also on how to extract CRM Marketing Attributes for Business Partner.
Thanks for your help.
Ricky

Hello Ricky,
I haven't found any conclusive document about loading Business Partner from CRM 4.0 to BW 3.5. If there is someone out there who knows about that documentation I would really appreciate it.
Here is what we did regarding BP relations, marketing attributes and addresses:
1. Marketing attributes:
These data type is difficult, because you have to build a special extractor for each marketing attribute group. And because Marketing attributes cannot be transported, you cannot transport the extractor. This poses a big problem in many projects. Therefore we solved it by creating some view extractors on the appropriate CRM tables: AUSP, CABN, KSML, KLAH. I can give you some more details, if this will help.
2. BP relations:
We build a view extractor for this too, because it was much easier to extract the data from BUT050 and BUT051 than trying to find out, how the business content extractors do their work. Using this extractor, we build some special ODS and InfoCubes for the relations we were interested in.
There is Business content for BP relations, but we kept to the generic extractors, because they were easier to verify.
3. BP adresses:
We use 0CRM_BPDEFADDR_ATTR to get the primary address.
We use 0CRM_BPART_ATTR to get BP master data
We use 0CRM_BPART_TEXT to get BP text.
We have only about 300.000 BP in CRM, so we do a full update everyday.
I am not sure, if these three data sources are part of the current BW 3.5 business content, because we started with BW 3.0 and did not check for BC updates.
Kind regards,
Jürgen
Message was edited by: Jürgen Kirsch

Master data Extraction in BI7.0

Hello Gurus,
I am new to BI 7.0. I would like to know the steps of Master data extraction from ECC 6.0. to BI 7.0 I tried but as the transformation is different than BW3.5 I am not sure what exactly to do. I was trying to extract 0PROFIT_CTR & 0CO_AREA Master data..... Any other Master data example would be fine to. If anybody could explain in simple steps the above process, would be appreciated. Points will be awarded.
Thanks
Sujay

Routines can be added in Transformation step -6
1. Create the infoobjects you might need in BI
2. Create your target infoprovider-Infoobject
3 Create a source system
4. Create a datasource or use replicated R/3 datasource
5. Create and configure an Infopackage that will bring your records to the PSA
6. Create a transformation from the datasource to the Infoprovider
7. Create a Data Transfer Process f(DTP) rom the datasource to the Infoprovider
8. Schedule the infopackage
9. Once succesful, run the DTP to get data from PSA to Infoobject
10. Check Infoobject for data
<b>Loading Infoobject using Flat-File</b>
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
Hope it Helps
Chetan
@CP..

0ASSET_ATTR master data load error

Hi all,
I got an error when i was loading the master data for Asset number.
The error message in BI side is: u201CThe error occurred in Extractoru201D.
When tried to check the data in the RSA3 extract checker their it was giving me short dump with error message as
*Runtime Errors         CALL_FUNCTION_CONFLICT_LENG
Exception              CX_SY_DYN_CALL_ILLEGAL_TYPE*
Short text: Type conflict when calling a function module (field length).
What happened?
     Error in the ABAP Application Program, The current ABAP program "GP4A36CIW2A4S3VKUAJL657AX3F" had to be terminated because it has come across a statement that unfortunately cannot be executed.
     A function module was called incorrectly.
*Error analysis: *
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was not caught in procedure "EXTRACTOR_FETCH" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is:
    The call to the function module "ARBW_BIW_GET_MASTER_DATA" is incorrect:
    In the function module interface, you can specify only fields of a specific type and length under "E_T_BIW_ASSET". Although the currently specified field " " is the correct type, its length is incorrect.
Thanks & Regards
Prabhakar

Thanks KK !!!!!!!!!!
Issue got resolved.
ASSIGNED POINTS.
Thanks & Regards
Prabhakar

R/3 Master Data Extraction Using Function Module

Hi Experts,
Could you please let me know why & How (Detail procedure) to extract R/3 master data using function module.
My team manager asked me to extract master data from R/3 for 3 more attributes of info object '0material' which is already defined as data target.
I would like to know why they are extracting data using function module
Thanks

The steps for creating extractor using Function Module. I
1. Create new Function group (if you have already not done so) in Se80
2. Copy Function module "RSAX_BIW_GET_DATA_SIMPLE" with suitable name.
3. Change the code that populate data.
Following table may give you the guideline for parameters.
Parameter Description
I_REQUNR (import) BW provides this request identifier. It is a system-generated identifier in the form REQU_XXXXXX. BW uses this same identifier in all function module calls that relate to a single load.
I_DSOURCE (import) The name of the generic extractor
I_MAXSIZE (import) The maximum number of records that BW expects to be in each data packet
I_INITFLAG (import) A Boolean flag that indicates if this is the initialization (first) call to the function module
I_READ_ONLY (import) A test flag not needed in most extraction scenarios
I_T_SELECT (table) This table holds any selections from the BW InfoPackage. The function module should examine these selections and only return data that matches the selections.
I_T_FIELD (table) This table holds the fields that BW requests
E_T_DATA (table) The function module fills this table with data records. These records then return to BW as data packets. This table has the same structure as the extract structure defined in the generic DataSource.
NO_MORE_DATA (exception) The function module raises this exception when no more data is available
ERROR_PASSED_TO_MESS_HANDLER (exception) The function module raises this exception if an error occurred during the extraction. It alerts BW to check for error logs.
Change following code to put the selection fields
Select ranges
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
L_R_CONNID FOR SFLIGHT-CONNID.
Change following to populate data
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
below links
Re: functionmodule
Re: FM for G. extractor
***Assign points if it helps.**
Regards
CSM Reddy

Material Master Data Loading Error

Hi All,
I am loading master data for material. i got the following error.
1. 0material_attr :
    Record 1 :0MATERIAL : Data record 1 ('000000000000010220 '): Version '000000000000010220 ' is not   valid
    Process :   If this message appears during a data load, maintain the attribute in
                     the PSA maintenance screens. If this message appears in the master data
                     maintenance screens, leave the transaction and call it again. This
2.0material_text : Data record 1 ('000000000000010220E '): Version '000000000000010220 ' is not valid
   Process : Same as above.
I have applied RSKC tcode in BI with ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX, and one special character string. but still getting the same error.
Regards,
Komik Shah

Hi All,
Thanks for the reply. i have solved most of errors. but there are some errors like this
Diagnosis
    Data record 261 & with the key '000000000000132559 &' is invalid in
    value '10x8x5 &' of the attribute/characteristic 0SIZE_DIM &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This allows to maintain your masterdata
which string i should have to add in RSKC to remove this error ? i have already added the ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX.
I have assigned points.
Regards,
Komik Shah

Master Data Extraction Error

Similar Messages

Maybe you are looking for