Master data extractor -Adding a new field.

All,
I will need to add a new field to the Masterdata extractor (*ATTR). I have the following questions. Please clarify.
R/3 side.
1. I guess I will go SE11 and add this feild to the Extract Structure. Is there any thing else here?
BW side.
2. I will create this newly added field as an attribute. Now I want this to be a Navigational attribute in the cube. So
a) Do I have to delete the data from the cube?
b) How can I populate the history data for the new field?
Thanks,
Ajay.

Hi,
If the field is already available in the extract structure,
i think we change the properties of the field in table ROOSFIELD,
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=12607
to make it available for extraction.
Kedar can you please suggest?
Regards,
Raj.

Similar Messages

Adding a new field to the Address Data for a business partner

Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
Yusuf

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Adding a new field and new data item breaks layout

I am adding a new field to a subform and populating it form a .Dat unfortunatly adding this field is causing data outputed to the subform below it to shift down one line on the page when outputted.
This new field is outputted at the top of the form and and the line being shifted are below this.
Below is the field details and the field as it is in the .dat file.
Field:F_PO_NUMBER [1]
Lines: 1 Characters: 20 Angle: 0
In Subform
: Main_Page
Options
: Global
^Command JFPAGE_START
^Undefine global:~^PAGE 1
^define global:SEQUENCE \pic"NUM999999",@D:NUMPAGESPRINTED../\pic"NUM99",@$PAGE../\pic"NUM99",@:JFPAGE_PAGE_OF..
^define global:JFPAGE \pic"NUM99",@$PAGE.. of \pic"NUM99",@:JFPAGE_PAGE_OF..
^GLOBAL Email COLL_TEL_NUM~12345678~^REFORMAT OFF
^GLOBAL F_CURRENCY_CODE
GBP
^FIELD F_PO_NUMBER
^COMMENT R_remit_customer
^FIELD F_REMIT_TO_CONCATENATED
Address
^COMMENT M_INVOICE_HDR_BOX1
^GLOBAL F_TRX_TYPE
Invoice
Now the weird party is if I move the new field in the .dat as below it fixes things and the everything lines up like it should do.
^Command JFPAGE_START
^Undefine global:~^PAGE 1
^define global:SEQUENCE \pic"NUM999999",@D:NUMPAGESPRINTED../\pic"NUM99",@$PAGE../\pic"NUM99",@:JFPAGE_PAGE_OF..
^define global:JFPAGE \pic"NUM99",@$PAGE.. of \pic"NUM99",@:JFPAGE_PAGE_OF..
^GLOBAL Email COLL_TEL_NUM~12345678~^REFORMAT OFF
^GLOBAL F_CURRENCY_CODE
GBP
^COMMENT R_remit_customer
^FIELD F_REMIT_TO_CONCATENATED
Address
^COMMENT M_INVOICE_HDR_BOX1
^FIELD F_PO_NUMBER
^GLOBAL F_TRX_TYPE
Invoice
^FIELD F_TRX_NUMBER
I hoping someone might have an idea of why this is the case as I'm at a loss regarding why its happening.

I may not hit on it exactly, but this sounds like Adobe's processing order.
It wants to process the fields in the order they are in the DAT file.
I have a similar problem with an overflow field, that isnt last in the DAT file,
Read this here:
http://forums.adobe.com/message/2298283#2298283
Now that may not be exactly your issue, but I think its the same inherent problem,
Adobes processing order for the fields/subforms.
I am still trying to resolve my issue, but found the ^field command in the reference manual (Print Agent),
and am wondering if I can use it.

Enhancing master data extractor View-based

Hi there,
I want to append fields to a standard master data extractor that uses a standard view. How can the enhancement be performed? Per my understanding, the append structure won't work here. So is extending the view the only valid option? Please can you provide steps how this needs to be done.
Thanks!

Hi Intel,
The first step would be to enhance the underlying tables involved in view. You will have to first add the required field in one of the tables involved in building the view.
In this enhancement you might have to use append structure if it is standard table or in case of 'Z' table the field can be directly added.
Once you add this field in table you will have to make this field available in View for usage and then simply enhance the DS, replicate the DS. You will get the newly added field in BW.
Regards,
Durgesh.

Data not loading for new Fields InfoObjects from DSO to InfoCube

Hi Gurus -
               I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
Here is the New Scenation:
     DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
-Sonali

Hi,
Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
Regards,
Mani

Adding a new field to search of Service Contracts

Hi Experts,
I have a requirement where in to add an existing field i.e your ref (sold_to) your_ref_sold field into the search criteria of Service Contrct .
How to add the field to the Search .
I have few questions here.
1 need I use EEW to add the field to Search but its already existing?
2 If not How to append the Structure crmst_query_src_btil and enhace it with field required?
3 how to implement the BADI crm_rf_search_eew?
Thanking You,
Sree.

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Adding a new field to existing structure

HI all
I am adding a new field to the existing structure in BW ,shall I remove all the data in the cube to fill fill this field for the previous records and reload again or any other solution
thanks in advance

Hi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas

Adding a new field to the selection screen of a LDB

Hi all,
I want to add a new field Clearing date(BSEG-AUGDT) in the dynamic selection screen of the report RFUMSV00.
For adding a new field i have copied the SAP view of a Logical database to CUS view.
Next i had added the Clearing date(BSEG-AUGDT) to the function group Document header(01) and selected the check box Preselect and saved the view.
But still i am not able to find the newly added field in the dynamic selection screen of the report.
Please suggest me where i am going wrong or how to do this.
Thanks in advance
Ajay

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Adding a new field to the search help exit

Hi friends,
adding a new field to the search help exit. How does it work ?
Thanks in advace
Ilhan

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Problem adding a new field to existing BPS planning layout

Hi
I am new to BPS and planning
I have a requirement to add a new field which has values maintained as 0 and 1 to an existing planning cube.The user wants this new field in the existing planning layout where in he can enter the values for this field as 0 or 1.I have created a new field and maintained values for this field as 0 and 1.I have added this field to the existing planning area and have created variable with fixed value with range 0 to1.I have added the same in selections in existing planning level and package as well along with other existing selection conditions.
In additional functions of adhoc package they have made setting as set to all possible char combination.
In this planning area all the selections are locked in planning level and package.
Now when i execute the planning layout to enter data,my new field is grayed out,it does not allow me to enter the values.need help with this as to how can i make this field input enabled.This is an independent characteristic.
Thanks
Panchan

Hi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas

SAP Work Manager customization - adding a new field to equipment details screen (Syclo Agentry)

Hi Experts,
I am trying to add a field (NAME1) on the Equipment details screen under work orders in work manager 5.3 application.
I have performed the following steps, but I am getting an error while connecting to the application.
1) Create extension for Equipment class to add a new field.
2) added the new field (Name1) as the property to the standard object Equipment.
3) Added the field on the screen.
4) Added the field (name1) to the complex table ctEquipment.
5) Added the JAR file to Agentry.ini file.
6) Changed the Class mapping for parameter "Equipment" under group "SAPOBJECT" to point it to the custom (Extended) class.
7) Changed the class mapping for complex table parameter "ctEquipment" under group "CT_SAPOBJECT" to point it to the custom class.
8) after publishing the changes and re-starting the server, I get following error.
the log file generated (message.log) also has the same description.
What am I missing here? Any help would be really appreciated.

Hi Emanuel,
Thanks for looking into this issue.
I have performed the following steps as suggested by you, still it doesn't seem to work and gives the same error.
Below are the changes done on the ECC Side.
1) Copied the standard equipment class /SYCLO_CL_PM_EQUIPMENT1_DO to custom class ZSYCLO_CL_PM_EQUIPMENT1_DO. Changes made in the GET Method to get custom equipment related data
2) Modified the standard equipment structure /SYCLO/PM_EQUI_STR by adding one custom field
3) Configured this custom class as the object handler in the equipment mobile data object
4) Configured this custom class as the object handler for the equipment complex table
5) We are still using the standard BAPI Wrapper itself for getting the equipment data and the added field is reflected in the BAPI Wrapper table parameter
Is there something we are missing?

Adding a new Field in OFR

Hi,
Is there a documentation available which can help in adding a new field in OFR.
What should be kept in mind doing that etc..
Anything would be helpful.
-shashwat

Hi Vikrant,
I was going through the Oracle KB and found some info for adding a new filed @ 'How to Configure a Custom Field to Assign Meta-Data Value Using Part of Original Document File Name [ID 1258984.1'
Is this different ?
Regards
Shashwat

Master data extractor - Customer Number

Master data extractor for Customer number is in LO as is to be.
But now I need that for finance as well - so is it usually in the Finance Process Chains or LO process chains?
There are no LO chains ready yet....so how does it work usually?

Hi,
You can take the delta upload of Customer in both process chains . Or you can take new chain which will has the delta load of customer and LO chian & FI chains are as child chains.
With rgds,
Anil Kumar Sharma .P

Deposit Advice (XML) - adding a new field

Our requirement is to add a DFF to the Deposit Advice. The PAYUSCDA was customized to add the new DFF. However, it is not appearing in the XML to be included in the template. Appreciate sharing of any information.
Thanks.

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Error while adding a new field to the Segment in we31

Hi ,
I am getting error when i am trying to add the new field to the cust. segment.
It is released for the adding the new fields i am cancelling the release , but i got a message like this
Error while resetting release of segment 'segment name'.
it is comming from the message class EA and message number 259.
Thanks in advance.
Reagrds,
bharani

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Master data extractor -Adding a new field.

Similar Messages

Maybe you are looking for