Master Data Governance & Implementation of SAP Master Data Objects
I would like to get hold of a case study on Master Data Strategy Governance Framework and Implementation of governance processes for Master Data Objects acrosss all SAP Modules. Governance processes do not have to use SAP MDM for master data management.
If any one in SAP community has implemented Master data governance, I would like to benefit from their experience and hence the request
Hello,
Not sure what sampling approach is, but it certainly help build a business case if you can provide sample data and case studies.
You may refer the SAP Provided PDF and presentations, to build your Business Case.
[SAP MDG|http://www.sap.com/solutions/enterprise-information-management/master-data-management/master-data-governance/index.epx]
Regards,
Abhishek
Similar Messages
-
How to Display the ColumnName for the Text of any Master Data Object in BEx
Hi Experts,
In Bex Analyzer While Displaying the Key and text of any Master data object it shows column name for master data key but not for the text, here client requirement is he wants to see the Text column name as Description for any master data text.
say Customer Number is a master data object , while displaying key and text of CustomerNumber - column names should look like as below
CustomerNumber Description
C11111 Pepco
C11112 Coke
but usually in Bex Analyzer it displys as following(Text without column Name)
CustomerNumber
C11111 Pepco
C11112 Coke
Please suggest how can we achive this requirement, thanks in advance.
Regards,
ChandraHi Chandra,
I suggest you to enhance your datasource with text feild, by adding text feild to your datasource in ECC side and replicate it ti BI side.
For this you have to write code at CMOD.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/302d4b15-5847-2a10-93bb-9c45d9f06b16?QuickLink=index&overridelayout=true
Better this doc will help you.
Regards,
rvc -
Unable to delete master data line items - Master data object CCHIUSRAM
Hello
We have an issue with the Master data Object CCHIUSRAM - CC Hier User Auth Maintenance. It has only master data and no texts no hierarchy. It is not time-dependent. It has /BIC/PCCHIUSRAM, /BIC/SCCHIUSRAM as database table only. This master data is not being used in any infoproviders.
In development client we are able to delete the line items of the Master data along with entering line items. RSRV check gives green for all checks.
In Test / Production client we are not able to delete the line items of the Master data. We are only able to enter master data lines and if we change any item then it creates another entry in the table.
Tried SE14 & RSDMD_DEL_MASTER_DATA - both does not help.
Did ST05 trace, could not find something concrete.
If any one has faced such an issue with any master data item then a response is much appreciated. It has become a bottleneck for us.
Many Thanks in advance
Pradip ParmarThanks for the response.
I can do this in EBD, but it is working fine in EBD. I cannot do this activity in EBP / EBT as the systems are closed and I cannot activate directly in EBT / EBP.
Besides, I have recently transported active versions of the object in EBT / EBP all again twice to see if it changes anything.
My guess is that, there is something stupid may be I am missing somewhere.
Any help is much appreciated.
Thanks -
How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar GuntlaHi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P -
How to find the size of the master data objects in the BW system?
Hi,
We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
For example, we have many Texts, Hier & Attributes.
0COUNTRY_TEXT
0REGION_TEXT
0PERSON_ATTR
0MATERIAL_LPRH_HIER
Advance Thanks.
Edited by: BW USA on Feb 2, 2010 10:52 AMHi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal -
List of Master Data Objects in ECC 6.0
Hi All,
Can anyone please provide me a list of Master Data Objects in ECC 6.0? *\[removed by moderator\]
Thanks,
Kaushik Koli.
Edited by: Kaushik Koli on Jul 1, 2008 1:20 PM
Edited by: Jan Stallkamp on Jul 1, 2008 4:32 PMHi Gareth,
Thanks for your reply.
I know it is not an easy task but I need to provide a list of master data objects in ECC 6.0.
Can you atleast tell me where to start from? Any manual way of finding it will also do?
Regards,
Kaushik Koli. -
Hi Folks,
can any one please tell me how can i delete a particular keyfigures data i na master data object.
just i loaded wrong data to the keyfigure.i want to delete the whole data for the keyfigure only.so any one please help me .its very urgent.
Thanks in advance.
ashok.Hi Ashok,
you cant delete particular attribute (as keyfigure in ur case..) data for particular master data.. you need to delete entire master data once.. but before that you need to delete transactional data related that master data.. and then load once again with the correct data...
but you can't delete particular attribute(key figure data)...
otherwise.. you can load once again the correct data.. because.. if you load same data means master data will just ovverwrite the previous data so, you can try with this option also..
regards
@jay -
Transaction code to list the warehouse master data objects
Hello all,
Is there any transaction code that lists all the warehouse master data objects/ reports. If there is any transaction code or document related to it pl. post it.
Thanks,
maxxHi Greetings
Transaction : SAP1
Logistics Execution --> Warehouse Management --> Master Data
You can find Number if WM master data reports.
Gobinathan G -
Master data object - Available for reporting related
Hi Colleagues,
I want to load some 'duplicates' to info Object X. Meaning I have all values same but differ in one attribute. (Key is same). I do not want to use compounding for few reasons. I have not explored on functinality masterdata for reporting (Flexible update, not sure i used correct word) Can you please extend help in understanding the following..
Questions 1:
I understand that I can make available for reporting the existing master data object.
2) Can I add some code to allow duplicates there?
3) Can still the infoobjet navigational attributes has the same functionality - meaning they can be reported from reports of this newly extended masterdata?
Thanks for your time.
Best Regards,
HariHi Arun,
Thanks for your time..
Infoobject alread exists with out the attribute below at the monet. It is also available in the cubes for my reporting on cubes..I would like to add the following attribute for my phase 2 for my new reporting needs..
Data:
<u>Infoobject - Attribute,</u>
SKU1 - GRP1
SKU1 - GRP2
SKU2 - GRP2
The issue is with the 1st 2 records.. As I do not have the componding.. My Cube already have Infoobject with lots of data... I do not want to add attribute componding as it demands for the presence in the cubes also. So I have to double the current data base size.. Ahh I do not want this..
Coming to reporting on the cube
I would like to report on both the things.. Like..
Including attribute
SKU1 GRP1 abcd
SKU1 GRP2 abcd
SKU2 GRP3 xyz
excluding attribute
SKU1 abcd
SKU2 xyd
We do not have any keyfigures..none is related with time..
Hope I am clear..
Thanks for your time,
Regards,
Hari
Message was edited by: Hari Kiran -
Load Failure for Master Data object
Dear Sdns,
Am doing daily master data loading for VENODR_ATTR master data object.... Am loading it through DELTA Update.... I got an error in Status Tab.
rror message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
The Error Message is : - Update mode R is not supported by the extraction API.The application program for the extraction of the data was called using
update mode R . However, this is not supported by the InfoSource.
Kindly Help me if any of the Snd people might have face this kind of problem...
Answering Getz Appreciated,
Warm Regards,
AluriHi Aluri,
The file might be used or being edited by some other person when you are doing the delta.
CHeck the source system connection @ AWB.activate it.
Follow these steps
1. Activate transfer rules for data source in source system.
2. Activate the ODS
3. Activate the update rules (ods to ods and also ods to cube)
5. Right-click at the ODS, choose 'Generate Export Data Source'
6. Replicate the data source
7.se38---->RS_TRANSTRU_ACTIVATE_ALL for source system .
Then start data loading again.
Hope this helps.
Assign points if useful.
Thanks & Regards,
Bindu -
Loading from ODS to Master data Object
Hi Friends ,
Please let me know how to load from ODS to a master data object.
Thanks,
krishnaHi Krishna,
If your master data is enabled as "Infoprovider" then you can use an export datasource on the ODS and load the data into your master data.
I am not sure if it will work if the master data info-object is not enabled as "Infoprovider".
The other mechanism would be to use an infospoke to download the ODS data into a flatfile. And then use the flatfile to upload the master data.
Hope this helps.
Bye
Dinesh -
A master data object is loaded on a daily basis from R3 (Full Load). In the past there have been loads to the same object via flat files.
A full load from R3 does not overwrite records which are not part of R3 but part of a flat file load, is that correct? ThanksJust to add (even though it is answerd )
If you had the zero-fill property set in OMSL(?) for material no, these two would values have been treated as one (with zeroes filled on the left). Check table value for field TMCNV-FLAG0 (this should be set to 'X' to have the numeric values zero-filled automatically).
Caution : once this setting is done and materials loaded, it shall never be changed. -
If I have created selection packages to load to a master data object for example:
1. Load to 0MAT_PLANT
2. Five packages created filtered by plant range
If I kick off the first package do I need this load to finish before the second package can load into the object i.e. 0MAT_PLANT is locked by the first package or can I load packages in parallel to a master data object? If so how? ThanksThanks for that, have carried that out. I have observed the following would be grateful if someone could confirm
1. Have a package running 2+ million lines
2. Kick off a package with a few hundred thousand lines after the first package, will complete before first package
3. Get an error since the extract completes in R3. However cannot load to the object since it is locked by the first
4. Message below:
User BWR3REMOTE is preventing you from loading master data for
characteristic 0MAT_PLANT . The lock was set by the master data loading
process with the request number (DataPackage number)
REQU_46MIUD73IBHYLLD9KZCAX4P47(000226) on 20070729,171630(711753) . -
How to load data for attribute of Master Data Object from PSA
Hi Experts,
I have a Master data Object, 0Equipment.
I loaded data to PSA from R/3.
I am able to see records for Zxxx field in PSA.
I have added a new mapping object Zxxx in BW.
But, when I loaded the data from PSA to Master Data Object, 0Equipment,
I am not able to see records for Zxxx which is an attribute of 0Equipment.
I do see the records for rest of the attributes of this Master Data Object.
I tried deleting and reloading the data
and treid to check attribute change run
Please let me know if I am missing something in loading the Master Data from PSAJr Roberto,
I checked all the records in Maintain Master Data and did set the Zxxx Not Equal To Blank.
No data for Zxxx InfoObject, eventhough there is data in the corresponding field in PSA.
I did 1:1 mapping.
Need help -
Turning off the text for a master data object
What happens if we turn off the texts for a master data object? (In RSA1, under info objects - double click on info object and go to Master data/texts tab and untick the 'with texts' box). Are there any risks in doing this? Has anyone performed this and run into any issues? Thanks
Hi,
There are no issues in turning off the texts, but if its an object that requires description in the report, say material, plant etc, then you won't have that available as the texts are disabled and not loaded.
Cheers,
Kedar
Maybe you are looking for
-
Getting SunScreen work in Solaris 9
Hi all, I installed Sunscreen in Solaris 9 from the CD, path /cdrom/sol_9_1202_sparc_2/Solaris_9/ExtraValue/CoBundled/SunScreen_3.2/sparc Now i am trying: root# ssadm edit policyname could not acquire read lock. From sun docs: """""" could not acquir
-
Photoshop CS4 SDK & Mac OS X 10.5 SDK
I have existing Photoshop UB Plug-ins built under OS X 10.4 and the OS X 10.4 SDK, Xcode 2.1.x & Photoshop CS3 SDK. I am attempting to use the new CS4 SDK under OS X 10.5 SDK. They do not build as there is a conflict in PITypes.h with the attempted
-
Hi, I have a problem to get a valid PL/SQL wrapper for the web-service at http://adostest.armstrongconsulting.com/DSX/DocumentServices.asmx?wsdl I use jpub to generate the web service callout (jar file and pl/sql wrapper) and the generation of that f
-
Hello There, We have a CCM 4.1(3). In the Gateway configuration page do I need to enable the Media Termination Point? What exactely does the MPT? Thanks,
-
Apple script 2.2 The apple script editor will not allow this function to be written, =SUMIF(range,criteria,sum_range) when the criteria is a text word enclosed in double " ". The editor comes up with an error. If you delete the double " " in apple s