Master data hierarchy

Hi gurus
pl tell me if we do the Master data hierarchy full load again , will it going to overwrite the master data or will add up the data in master data table?
thanks
Taj

Hi Taj,
This is just similar to the way other master data, i.e. Attr and Texts are laoded. If you have the Text for MAT001 in the system, and you reload for the same material, the old value will be replaced with the new one (unless you are using time dependant texts and the date range is different).

Similar Messages

How to load master data hierarchy load from BI to BPC 7.5 NW

Hi,
I am testing master data hierarchy data upload from BI to BPC. However when i run master data hierarchy mport package, it's always displaying a warning message saying that no records are returned from "Z_PFT_CTR" which is my info object name.
My transformation is as below.
0BUS_AREA=BUS_AREA
0COMP_CODE=COMP_CODE
0CO_AREA=CO_AREA
0LOGSYS=LOGSYS
0OBJ_CURR=OBJ_CURR
0PROFIT_CTR=PROFIT_CTR
0RESP_PERS=RESP_PERS
0RESP_USER=RESP_USER
Conversion is as below
ID=ID_CONVERT.xls
PARENTH1=HARI.xls
Hierarchy i have mapped in conversion file from Source Inforobject 1000PCDUMMY-1 to BPC PARENTH1 Destination.
Any suggestions plz?

Hi,
Just follow the docs in "How Tou2026 Automate BPC 7.0, version for the NetWeaver Platform Master Data Loads from BW to BPC"
where you will get detail step-by-step procedure to load data.
Check the url:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
Before that you have to transport into BPC system the load to work fine.
Thanks
Debasisha

How to check loaded data Master Data Hierarchy?

Hi
Please let me know the way of checking available data which was loaded into the Master data hierarchy objects.
when i go into that particular infobject's hierarchy it is showing maintain hierarchy in its infoprovider execute function colum. How to see the data of it. coz i have to cross check whether the data has been loading/not.
Thanks

Hi,
For Example:
If its a 0Customer Info Object , then in the 0Customer hierarchy table data can be checked in the H - table.
That is in the 0Customer info object in the Hierarch Tab there will Hierarchy table /BIC/HCUSTOMER when you double click it you can see the data loaded to it.
Regards,
Adhvi

Importing Master Data Hierarchy from BW Infobject

I am importing from top level node(text hierarchy) of BW infobject Account. All the records are rejected with the following error. It says that Hierarchy nodes include dimension members that do not exist. The reason for this is that it is top level text hierarchy defined by users. I can import the base level one by one. Any sugestion please. How to docs are not very helpful.
/CPMB/MODIFY completed in 0 seconds
/CPMB/BW_IOBJ_HIER_SOURCE completed in 0 seconds
/CPMB/IOBJ_SOURCE_HD_CONVERT completed in 3 seconds
/CPMB/BPC_HIER_DATA_TARGET completed in 5 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
INFOOBJECT=0CS_ITEM
SELECTION=<Selections><Selection Type="Hierarchy" ImportText="1"><Hierarchy><ID>D8IGJYZMI5W3TJ2UBMZGCL6QF</ID><MemberID>TB</MemberID><Level></Level></Hierarchy></Selection><KeyDate>20100820</KeyDate></Selections>
FORMAT= No
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\PILOT\forHier_Account.xls
DIMNAME=P_ACCT
[Messages]
Task name HIERARCHY DATA SOURCE:
Info: Hierarchy node includes text node or external characteristics
Record count: 2724
Task name CONVERT:
No 1 Round:
Record count: 2724
Accept count: 2724
Reject count: 0
Skip count: 0
Task name HIERARCHY DATA TARGET:
Hierarchy nodes include dimension members that do not exist
Submit count: 0
Application: PLANNING Package status: ERROR

Thanks Jeffery Holdeman for that. Tranformation & Coversion files for Mater Data & Hierarchy are listed below.
In my DM package the Hierarchy Tab is Hierarchy = TCTB, EMPTY, Member ID = TB(top most level of taxt hierarchy)
Master Data:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
ID=0CS_CHART+ID
*CONVERSION
ID=[COMPANY]id_conversion_01.XLS!CONVERSION
id_conversion.xls is as below:
(-     js:%external%.replace("-", "_")
Transformation & Conversion file for Hierarchy:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
NODENAME=NODENAME
HIER_NAME=HIER_NAME
PARENT=PARENT
ORDER=ORDER
IOBJNM=IOBJNM
VERSION=VERSION
*CONVERSION
HIER_NAME=[COMPANY]hier_conversion_for_account.xls!CONVERSION
NODENAME=[COMPANY]hier_conversion_for_account.xls!NODENAME
PARENT=[COMPANY]hier_conversion_for_account.xls!NODENAME
hier_conversion_for_account.xls is as below:-
Nodesname(worksheet)
External        Internal
-     js:%external%.toString().replace("-","_")
*     js:%external%.toString().replace(/\s+/g,"")
Conversion(worksheet)
EXTERNAL     INTERNAL     FORMULA
TCTB     PARENTH1

Master data hierarchy synchronization for BPC NW 7.5

Hi all,
Here is my situation,
Trying to load master data and hierarchy for BW costcenter. Parent CostCenter hierarchy is 10001000.
CostCenter members are concatenated with Controlling area 1000.
I followed the master data and hierachy sycnhronization for 7.5 without any success.
I want to load only CsstCenter members without concatenatinon e.g. instead of 1000F1200, I want F1200.
Note thaI cannot use SUPPRESSCHARACTER 1000 as it suppresses other unintended values like 1000F1000
I need a method to truncate only first four characters
Please helo,
Kara.

Vijay,
I am looking for suggestions on transformation and conversion files.
My current settings,
Transformation file:
NODENAME=IF(NODENAME(1:4)=STR(1000) then NODENAME(5:13);NODENAME)
HIER_NAME=HIER_NAME
PARENT=PARENT
ORDER=ORDER
Conversion file:
External: 10001000
Internal: PARENTH1
I get error: "Hierarchy nodes include dimension members that do not exist"

Master Data & Hierarchy loading into BPC from BW

HI all,
When i am getting master data and hierarchy from BW i need to replace a "-" to an "_".
These members are parents in BW.
I was able to do that using a conversion file for the master data. But when i run the hierarchy package it says parents dont exist because the nodes that were pulled before are not with a underscore and not a dash.
Ex: XXXX-XX needs to be replaced as XXXX_XX.
This member is a parent aswell. So i need to add conversion in the hierarchy load. I did that but its not taking it.
Conversion file for hierarchy load looks like this:
External Internal
XXXX-XX XXXX_XX
I am on BPC NW7.5 SP6.
Thank You all.

I think conversion file string manipulation for BW infoobject hierarchy imports has some issues. I suggest reporting the problem to SAP support by creating a message on the Service Marketplace. Please be very clear in the message about your setup and how to recreate the problem and why you think it is a bug so that you don't receive back a reply about it being a consulting issue. Expect some time to work through this with support and eventually development, with the goal of getting a correction note released to fix the issue.
In the meantime, you might try to do the string manipulation in the transformation file *MAPPING section instead of the conversion file.
NODENAME=NODENAME(1:4)*STR(-)NODENAME(5:6)
or substitute NODENAME above for PARENT if that is appropriate level with the issue.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Master Data Hierarchy - Urgent requirement

Hi All,
I have a requirement with respect to master data check for the hierarchy
I have a costcenter hierarchy where in the values for costcenter is coming from other system
Now for the costcenter hierarchy master data
when I load the flat file for hier to the above costcenter master data, it should perform the check such as
Befor loading the files to the master data, it has to do a master data validation check means it has to check the data from the flat files with respect to master data hier table(/bic/h*)
If the flat files has values which are not exist in the costcetnter master data, the laod should fail
I have explored various options but not able to figure out the solutions.
There is no update rules/ no transformation
Kindly let me know how to solve the same ASAP

try writing a code in the infopackage level.This might solve your problem

Master Data Hierarchy to Flat file Z_SAP_HIERARCHY_DOWNLOAD

Hello Experts,
I am planning to use Z_SAP_HIERARCHY_DOWNLOAD program to download hierarchy data into flatfile. Before that I have a question
1) Is it only used for Sorted and Time Dependent Hierarchies or for any Hierarchy?
If we can use it to any hierarchy can anyone tell me steps involved in it in detail.
I have How to Document for BW 3.5 but need some other reference documents if possible.
Thanks.
Edited by: saptrain on Mar 18, 2010 5:44 AM

Hello Ray,
Thanks for answering my question.
Below is the link of How To Document.
I am not sure about the code specified in the document. Can I directly use the code specified in the document or do I need to change the ABAP code?
Sorry for asking such a simple question.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb?quicklink=index&overridelayout=true
Thanks again for your quick response.
Experts please respond.
Edited by: saptrain on Mar 18, 2010 7:16 AM

Datasource exits transactional data, master data, hierarchy pls help

Hi experts,
I got to do a user exit assignment.
I m new to concept and have only little bit of theory knowledge.
i shud know the coding part and what shud i do to solve the issue
pls help me pls pls
i anybody knows this i will be greatful
Sincerly
Jay

Hi,
Thanks so much for ur responsee.
I have to
ask the access key from the basis consultant as i m new to the company.This position is for contract.and i m new to the company.
I need to begin my task soon.
So I thought of having idea before i start to work for this.
And coding too i need ur help .
i got to know the function module exit ..just had a brief reading about it from the network.
Thanks a lot in advance
Jay

Selection Set - Import Master data (prompt selection)

Hello Gurus,
When we run the package "Import Master data from NW infoobject" using data manager in BPC
we have options to select ,Infoobject ,write mode ,format ,transformation file and Dimension ,all of this we can use the answer prompt and provide the inputs using UJD_TEST_PACKAGE and automate it.
Now i want to also provide the inputs of "SET SELECTION" tab available on the package which are below ,so how to automate
Attribute ,Hierarchy ,Language ,Attribute List
in the prompt file in the UJD_TEST_PACKAGE
Thanks

Hi Peter,
You can trigger a BPC load from back end too. For that you need to create variants for the program UJD_TEST_PACKAGE or create a custom program depending on the requirement and then create variants( for example to load cost center master data, create a variant for 0COSTCENTER ) for it. The values for the variant{as already mentioned by Gersh} would be the text enclosed in square brackets after you run a Data Manager Package manually and then view details of the status.
Steps are:
1) Goto SE38
2) Enter the program UJD_TEST_PACKAGE or the custom package
3) Create a variant for the required master data/hierarchy load.
4) Enter the details of variant by using the details after you have manually run a data manager package.
You can test the package and include it in your pc's too.
Thanks,
Vinay
Edited by: Vinay Madhadi on Dec 16, 2011 5:01 PM
Edited by: Vinay Madhadi on Dec 16, 2011 6:18 PM

Sid for master data

hi all
we know that sidtable is generated for masterdata.
Does an sid table maintained and generated only for masterdata attribute or generates each sid seperately for masterdata attribute ,masterdata text and master data hierarchy .
with regards
srinivas.

Hi.
SID tables are only generated for Master Data Attributes.
Cheers,
Kedar

Master data in BW

Hi
We are implementing one new BW solution...I need to bring data from two different databases and one SAP R/3 system into BW cube.Now I start to wonder about somethings..
1.How do we decide which charateristics in the new solution need to have hierarchy?
Regards.

Hi ,
Most of the time there are some standard infoobject in every module for which we maintain master data / hierarchy etc.
ex: CCA have costcenter .
You can check the standard object and then ask client about their business model and requirement.
Which module you are implementing ?
Regards,
Jaya Tiwari

Error while loading the master data into hierarchy

Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
Prateek

Hello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep

Purpose of Update/Overwrite Hierarchy in Import master data package

Hi All,
Please let me know what is the difference in update and overwrite option in import master data package. Here when i tried running the package, both the option are altering the hierarchy of existing member.
My requirement is just to add a new member ID, if it already exist it should not affect those records and only update the new master data records.
Thanks & Regards,
Ramanathan

Hi Ramanathan,
You can run Import Master Data DM package in BPC to perform delta master data load. While you run DM package you get option to load Master Data from BW/BI where you can select:
1. MERGE: this will keep old data intact and also load new master data, and
2. COPY and REPLACE: This will copy new data and delete old master data.
As per your requirement, you need to select the First option. If you select Update option then it will not delete old master data, instead update the members and hierarchy according to the parent-children design which you would have given in the dimension membersheet.
Hope this corresponds to your requirement.
Rgds,
Poonam

Hierarchy in the master data

Hi Guru's,
For a consolidation reason i need to put my customer hierarchy (TA VDH2N in SAP) to the customer master data.
In the hierarchy i have 3 fixed levels so that's why i want to put in attributes of the master data 3 new attributes : Customer hiearchy level 1, Customer hierarchy level 2, Customer Hierarchy level 3.
but my problem i how to manage the extraction?
Thanks for help
Cyril

I found by create a routine on hierarchy table

Master data hierarchy

Similar Messages

Maybe you are looking for