Master Data Info Object is not updating Attribute data

Dear Sdns,
We are loading master data to ZCOMP_GL Info object through flat file  extraction... ZOMP_GL have four attributes.. Leaving three of the attributes Only one of the attribute which is CS_ITEM holds the data.
We loaded data ffrom flat-file.. It laoded sucessfully upto the PSA and data is available... And when we runned DTP the load was successfull.. In the manage screen of the Info object it shows the records are added successfully.. But when we see the data in ZOMP_GL. We are not able to see the Data  for CS_ITEM which is attribute.... Also we runned Attribute change run..
Kindly Advice me..
Warm Regards,
Aluri

Activate the data in the info object.
Ravi Thothadri

Similar Messages

  • Reg: No enries in SID table of attribute of a  Master data info object

    Hello SAP Gurus!!!
    I Hope everyone is doing good.
    I found some issues , when i loaded master data into master data info object in sap bi.
    I have an object which is holding master data (master data info object)---ZEMPID(employee id)
    I have attributes for this object are :   Emp name , Emp Phone number
    I loaded master data attributes into ZEMPID. I could see some entries in SID table of ZEMPID char info object  .
    But i am unable to see the entries in SID table of Emp name , which is a attribute of master data info object.
    According to my knowledge whenver we load data into sap bi , automatically sid values will get generated for that characterstic info object.
    so here in this case  Emp name is also a char info object , so whenever we load the data into master data info object , we have to see the entries in SID table of Emp name also  .But i am unable to see the entries in the SID table of Emp name. .
    So what might be the problem ?
    Awaiting for your valuable answers!!!
    Cheers!!

    Hi Rajavamshi,
    You are right whenever we load data in BI, it will create SIDs for info objects.
    But it will create SID in 'S Table' not in X/Y - Table.
    If master data is enabled for Emp name then it will create SID in X/Y table. I think the master data is not enabled for attribute(Emp Name).
    Please check in S Table, the SIDs will be there.
    If it is not the case, activate the attributes info objects and EMPID info object and load the master data and run ACR for EMP ID.
    If it is not working still, then do master data check in RSRV.
    Regards,
    Vignesh.B

  • No master data info objects' attributes in infoset

    Hi All,
    I am trying to create an infoset out of two ODSs. When I tried to create a report on this infoset, I cannot see the attributes of the master data info objects. What to do at this point?
    Regards,
    Mike

    Ok now I am confused.
    1. Replicate data source: these are all z objects. And it is a flat file extraction . In the Q system , when I go to source system tab and right click on the BW Q System , I can see replicate data source. Is that the point that you are talking about?
    2. Should I transport the transfer rules ?
    Thanks
    Message was edited by: Pooja Mittal
    Message was edited by: Pooja Mittal
    Message was edited by: Pooja Mittal
    Message was edited by: Pooja Mittal

  • Secure an attribute of a Master Data Info Object

    Hello,
    We would want to secure one of the attributes of the Master Data InfoObject. For eg. In  Material master data info object, we have price as an attribute. We would like to impose a field level security on the price field.
    Anyone please let me know how we can do it ...

    Steps:
    1. Make the info object authorization relevant. RSA 1- info object in change mode and in bex tab therw will be a check box and check that to make it authorization relavant.
    2. go to RSSM - create an authorization object.
    3. In PFCG, set the values for this object.
    4. Whereever this object is sued, the system will check for authorizations.
    Ravi Thothadri

  • Creation of master data info object- data coming form a 3rd party system

    Hi All
    i need to create a master data info - object  which connects the customer and the corresponding plant..actually thios data is coming from a third party system and they have maintained 2 tables one for customer and one for the plant details and these 2 tables are connected through some common id which populates unquie id for each customer and is maintained in the plant table with the same id...now both these tables have to be merged together and to be cretaed as a single info object..can any one suggest  me as to how to proceed with it.
    Regards
    Shilpa

    Hi,
    Create a Z-InfoObject with the same format as is used in your 3rd party system for the commonid.
    Add Customer and Plant as navigational Attributes.
    Create an infosource with these three fields.
    Unload (in a CSV-file) the commonid with customer and plant from your 3rd party system.
    Load these data to BI into your newly created Z-commonid InfoObject.
    Success,
    Udo

  • Key figure - master data info object

    I have been asked to create a master data info object for the object "users" and this is this how the data looks like in the flat file. The object users is a key figure. Can I create a master data object for key figures. Let me know , if I am missing something.
    State----Grade Level----users
    AL--0--
    53,520
    AL--1--
    57,423
    AL--2--
    56,172
    AL--3--
    57,859
    Thanks

    Hi Pooja,
    You cannot create master data for a key figure. You can include a key figure as an attribute for another characteristic though. If you need to store values that are in the form of numbers, you can create your char of type NUMC.
    Please let us know more about your scenario so that a better solution may be proposed.
    Hope this helps...

  • Master data info object - duplicate records

    Hi All,
    I have a flat file which has department data that looks like this
    0     OTHER
    0      00 Other
    1      01 Language Arts
    2      02 Mathematics
    3      03 Reading
    4      04 Social Studies
    5      05 Science
    6      06 Student Success
    7     07 Write Traits
    1     READING
    2     LANGUAGE ARTS
    3     MATHEMATICS
    4     SCIENCE
    5     SOCIAL STUDIES
    50     50 Profesional Development
    6     BUSINESS EDUCATION
    65     65 FRABOOMERANG
    7     FOREIGN LANGUAGE
    75     75 KA Software Product
    8     Legacy = 8: No Description
    80     80 CCI
    89     89 Money Only EDC Wrkshps
    9     GENERIC
    99     99 Money Only Miscellaneou
    I was asked to create master data info object for this. I created it but when I am loading it , I am getting an error that there are duplicate records.
    What should be done? Will such data be still created as master data or an ODS ? Because there are duplicate records.
    Thanks

    Hi Eugene and Bhanu
    I have the same issue. I have this master data flat file, with 2 fields . I am trying to load it . And the data looks like this
    0----
    1----
    001 Work'g Words Spelling     
    2----
    002 Vocab for Achievmt           
    3----
    003 ETS95 Packets Program     
    4----
    004 Every Day Counts            
    5----
    005 Phonics We Use            
    6----
    006 US94 History of US         
    7----
    007 Masterng SAT 1/PSAT        
    I tried Bhanu's suggestion of ignoring duplicate records . I did not get any error but that I lost some data. So I tried Eugene's suggestion of shifting the fields .. I moved the second field to the frist place and saved and loaded it. I got this error.
    "There are duplicates of the data record 2. with the key '3.' for characteristic 1.."
    Any suggestions.
    Thanks

  • Data is not updating in data target from PSA

    Hi,
    i have loaded data from flat file to an Info Object(with direct update)....the data is loaded correctly into PSA...when i manually read data from PSA to data target its not updting in data target.......can anyone help with this....thanks in advance..

    hi bwusr,
    direct update, so it's master data,
    is it attribute or text ? perhaps there's invalid character or lower case,
    check in monitor tab detail.
    and when you said not updated to data target,
    you check by right click 'maintain master data' ?
    or you mean it's not updated to reporting ?
    execute change run ? rsa1->tools->apply attribute/hierarchy change.
    hope this helps.

  • How to get master data records that do not have transaction data in a query

    Hi,
    How to get master data records that do not have transaction data in a query output. Can we create a query or any other way to get the master data records that do not have transaction data?

    Hi,
    Create a multiprovider which includes transactional data target and master data info object. Make sure that identification for this master data info object is ticked on both the provider.
    Create report on this multiprovider , keep the master data info object in rows , and now you should able to see all the values which are there in master data info object irrespective of transaction happened or not .
    Next you may create condition showing only zero keyfigure values , ie. master data without any transaction.
    Hope that helps.
    Regards
    Mr Kapadia

  • Crystal report for visual studio 2010 data source object is not valid error

    Hello,
    I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
    On my developer station, this operation works without problem but on client station, I get this error.
    The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
    Can someone help me?
    Thank you.

    Thank's for your answers
    Dim rsPkLst As ADODB.Recordset = Nothing
    Dim report As New crPickingList
    ' Fill ADODB.Recordset with SQL Statment
    If rsPkLst.RecordCount > 0 Then
          report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
    EndIf
    This error appears during  "report.SetDataSource(rsPkLst)" instruction.
    ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
    This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
    Developer and client station runs under Windows XP SP3.
    On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
    On client side I install CRRuntime_32bit_13_0_1.msi.
    Both stations use Microsoft .Net Framework 4.
    Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
    (I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
    David.

  • Scheduled finish date for process orders not updating in BW

    We are having problems with the scheduled finish date (GLTRS) for process orders. When the process order is already released, changes done in R/3 on the scheduled finish date will not result to a delta hence data in BW is not updated. Table AFKO, where data is coming from, is always updated with the changes though. 2LIS_04_P_MATNR is used in extracting the data.
    Has anyone experienced the same problem? We are looking for possible ways on how to have a delta whenever there are changes on the process order even after it is already released.
    Any help would be greatly appreciated...

    Hi Donna,
    If I've understood your problem correctly, you can increase the load frequency as Sriee has pointed out.
    If you want latest data frequently and if you are on BI 7.0 then you can look at Real Time Data Acquisition(RDA)
    Regards,
    Tom.

  • Keynote document saved in icloud not updating with data from Numbers? is icloud the problem

    keynote document saved in icloud not updating with data from Numbers? is icloud the problem.
    If both files are held locally on the computer it looks like there is no problem however if you try and do it though icloud (ie your docs are saved on icloud) you dont get the "source" oprion besides the graph etc. Is this a but or a broken function due to the new implementation of icloud.

    Hi sebnor31,
    This is Visual C# forum, but your question seems not related to Visual C# language itself. It most likely related to the bluetooth message transaction protocal or with the device itself.
    I'll move your question to [where is this forum for...] forum where the morderator may direct you to the correct forum.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • PC Sync could not update the data to the mobile ph...

    Ok now I am a little annoyed with my Nokia 6680.
    For the last four months it has been working fine but all of a sudden it has stopped synching with either of my PC's.
    The phone connects ok and I can do file transfers etc however when I try to sync it fails with the message
    "The Synchronisation has been Terminated!"
    and
    "PC Sync could not update the data to the mobile phone."
    I updated PC Sync to latest version on both PC's and I have tried cable and bluetooth connections but get the same issue.
    In the end I bit the bullet and re-initialised the phone and it began working again.... for three days and then its doing the same thing again. It still connects ok but no sync.
    My Laptop is using WinXP SP2 and my home PC is on WinXP SP1.
    Anyone able to help with this please, my phone is effectively now a paper weight and I will go back to Pocket PC phones again.

    Thanks for the tip I had the SAME problem on the 6822 same error. The phone had been fine for a month or so. Then nothing would synch, thought it was the PC fixed / reinstalled the software changes options nothing would work same error.
    Read your note, powered down the phone and Bingo all synched fine!
    Thanks very much. I'm using a Nokia 6822

  • Control file not updated till date in RAC two node database

    Hi,
    Good day.
    To my surprise i found that control files, in our database RAC with two nodes, are not updated till date except one from node 1 and another from node 2.
    But we got all the controlfile names in the init parameter file, in both the nodes.
    Node 1
    bash-3.00$ ls -lrt
    total 922128
    -rw------- 1 oracle dba 157286400 Nov 3 2007 cntrl03.dbf
    -rw------- 1 oracle dba 157286400 Nov 3 2007 cntrl02.dbf
    -rw------- 1 oracle dba 157286400 Apr 12 17:21 cntrl01.dbf
    Node 2
    bash-3.00$ ls -lrt
    total 922128
    -rw------- 1 oracle dba 157286400 Mar 30 09:17 cntrl03.dbf
    -rw------- 1 oracle dba 157286400 Mar 30 09:17 cntrl02.dbf
    -rw------- 1 oracle dba 157286400 Apr 12 17:20 cntrl01.dbf
    As you could see cntrl01.dbf is the only file updated till date in both the nodes. The database is running fine.
    what is actually happening?
    Any suggestions?
    Thanks,
    Balu.

    As you're using RAC it is very likely that you are using an SPFILE.
    Connect as a DBA account (or an account with SELECT ANY DICTIONARY privileges) in both the instances and do "show parameter spfile" and "show parameter control" (or query V$parameter)
    It is likely that the spfile is referencing only 1 controlfile.

  • Not showing attributes data

    Hi All,
    I have created one infoobject cust id. and also its attribute cust name. I have loaded data in the infoobject through DTP. But when i check the data through display data , it only shows me only cust id data and not its attribute data i.e cust name.
    Do anybody have any solution.
    Please reply.
    Javed
    Thanks.

    Hi,
    Please ensure that you have places the attribute in CUST ID Attributes tab.
    and see that infosource is defined properly
    Sriman

Maybe you are looking for