Master data infoobject values not presneting in the report

I have one infobject.that contains 50 values.
If i open the query desinger and in dimension if i open my infobject i can see only 30 records only,,,
how can i get 50 records?
master data is activated.......if i am trying to activate it shows as alearady masterdata is activated
Regards

Hi,
Activation seems to be the issue:
use the below program
RSDDS_AGGREGATES_MAINTAIN.
Simply give the Infoobject name which you want to activate and execute.
Reward if useful
Manish

Similar Messages

New InfoObject is not available in the report in the QA system

hai
i transported one report to QA system .
then i changed one InfoObejct in the InfoCube & report in the DEVB. Then i transported that report & infocube to the QA system.
But when i try to open the report in the QA system then it says that new InfoObject is not avialable in the report in QA system .
So pls tell me wt i have to do .....
i ll assing the points
rizwan

hai
I included in the new InfoObject in the master data infoObject . And this master data infoobject is avialble in the InfoCube .
This InfoCube also transported to UBW also. Even though im not getting this InfoObject in the report in the UBW report.
So tell me wht i have to do ...
Rizwan

Using Attribute of a Master Data InfoObject as a characteristic in the DSO

Hi
I have "ARBPL" field in the DataSource. And i map this source filed to "0WORKCENTER" Infoobject in the DSO.
This "0WORKCENTER" has an attribute '0WRCT_CATG" . I want this attribute "0WORCT_CATG" needs to use as a characteristics in the DSO.
So how can i populate the data for this attribute "0WORCT_CATG" from it's master data infoobejct "0WORKCENTER" in the DSO .
So please let me know
kumar

Hi Ravi Kumar..
U have ARBPL field in ur datasource and u r maping this field to a system defined infoObject 0WORKCENTER koooooland the same time u mentioned 0WORKCENTER have a attr 0WORCT_CATG..is their any field in ur datasource that defines(maps ) this infoObj 0WORCT_CATG. Map that field with the attr infoobject at info source level.
If u dont have any relevant field in the datasouce to define this 0WORCT_CATG object.. proceed with update routine..or start routine(transfer rules/update rules) according to ur convenient.

Master data not present in the reporting cube

Dear Experts,
There is a scenario in report design for me.
I have already created the Bex report and all the fields as mentioned are in the sales report.
Client now wants to include two more fields in the report.
One is the keyfig " Net value" which is present in the sales cube and i have already included in the report
and another field which is master data 0profit_center is not present in the cube.
Any ideas how can i include this 0profit center data so that i can display in the report?
As far as i understand, I need to include this master data in the sales Infocube which is being used for reporting.
But i am pondering upon the impact on the system because of this.
Now i have checked the BI system and the ECC table. In VBRP table of ECC, the profit center is present.
But when i see in BI the profit center is not being loaded from ECC but from flat file source system.
So i am confused how to go forward.
Can anyone suggest me what should be my approach?
Best Regards!!

You didn't understand what we suggested.
Rather than checking 0profit_ctr master data, you need to find the info objects(which are part of your cube) which have master data. in those 0profit_ctr can be a attribute. if yes then navigation settings will work.
if not then you can add 0profit_ctr to info cube and user master data look up thru routine or option read from master data(bw 7.3).
Other wise, directly add 0profit_ctr to your flat file data source(and cube) and maintain data thru flat file.
To look up your cube and 0pfirt_ctr need to have relations with another info objects other wise not possible.

Adjusting the SID table for master data infoobject

Hai
Im trying to activate one master data infoobject. But it says the error like below
The SID Table /BI0/SBBP_DELREF must be converted incompatibly with an activation of characteristic 0BBP_DELREF (changes to the key in the table). Table /BI0/SBBP_DELREF contains data. Parts of this data were lost in the conversion.
or
Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/SBBP_DELREF.
So how can i adjust the SID table for this .
pls tell me
kumar

Hi,
you'll have to delete ALL the master data for this IObj. Therfore you'll have to
delete all data in ALL the IObjs using 0BBP_DELREF (ODS, CUbes and characteristics).
Then activate your IObj. You will go through some step which I explained in the
following thread
Re: Urgent...Company Code lenght has been changed
Extract:
1. Delete 0COMP_CODE master data.
- get objects list using 0COMP_CODE with loaded data: I suggest to delete
master data via AWB (right click the characteristic). If it can't be deleted because
it is used display the deletion log (via AWB or tx SLG1 / RSDMD, MD_DEL).
- delete loaded data for the list above.
This should not be too much since you are in DEV.
2. change 0COMP_CODE length
- change the length to 4;
*- Activate your IObj. You'll get a popup log, validate. Activate despite warning and
errors. You will get An error message, validate.
You should get an horizontal pane with the activation log. Read it for your personal culture but if you don't have time then don't...
- Next the system will prompt to convert the tables: answer YES. The system will ask to schedule the table conv. in the background, go4it.
- next is the SE14 screen for the P table: Hit Activate and adjust (Direct
execution, or in the back as you wish). Answer yes to the mass processing
question and yes (again) for request adjust online. Your table should be converted successfully.
- go back twice from this screen (leaving SE14 tx and return to RSD1). reread the update log if you wish.
- repeat from the *- above... it will perform the very same for all other P tables of IObj using 0COMP_CODE and the 0COMP_CODE S table.
Your IObj is reactivated again. So should your ODS/DSO objects (check activate for example). Cube didn't need to convert tables since the MDID is note posted in any table of a cube.
Please note that once your IObj is in revised version you can perform the same via the menu extras / database table / convert all (see my previous post).
Now you have to evaluate the task. Of course that is a work to fix the mistake.
Depending on when it has be changed it may be worth to restore your DEV sys with a backup (loose work performed from the backup until now).
hope this helps... otherwise, revert.
Olivier.

Steps to create customized Master data infoobjects in BI 7

Hi all,
Can anyone please send the detailed steps to create customized master data infoobject in BI7,and also the data is to be extracted from two different datasources from two different source systems.
Regards,
G.Monica Roja Flora.

Some data modelling tips while creating master data infoobject and extracting data from different source systems -
If there are identical characteristic values describing different objects for the same characteristic in various source systems, you have to convert the values in such a way in SAP BW so as to make them unique.
For example, the same customer number may describe different customers in different source systems.
You can carry out conversion in the transfer rules for this source system or in the transfer routine for the characteristic.
If work involved in conversion is too great, you can compound the characteristic to the InfoObject Source System ID (0SOURSYSTEM). This means it is automatically filled with master data. The Source System ID is a 2-character identifier for a source system or a group of source systems in BW. The source system ID is updated with the ID of the source systems that provides the data. Assigning the same ID to more than one source system creates a group of source systems. The master data is unique within each group of source systems.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6399e07211d2acb80000e829fbfe/content.htm
Hope it Helps
Chetan
@CP..

Data not uploading in Time dependent Master data Infoobject

Hello All,
I have a master data infoobject for HR entity and have to load data from PSA to that info object.
The HR entity infoobject already have sone data like below:
HR Entity
Version
Date from
Date To
x
A
01.07.2013
31.12.9999
x
A
19.04.2013
30.06.2013
x
A
01.09.2012
18.04.2013
x
A
01.01.2012
31.08.2012
x
A
01.01.1000
31.12.2011
Now the data in PSA is as follows:
HR Entity
Start Date
End Date
X
01.01.2012
18.12.2013
Once I loaded this data to the infoobject, i can not see this value which is the latest value of this HR entity.
Can somebody please explain how the data gets loaded in the time dependent master data infoobject and why this entry is not getting loaded in the info object.
Regards
RK

Hi,
did you activate master data after your load?
You can check also version 'M' records and see if your record is there.
The load went green?
The problem is, that your entry overlaps all exisitng time intervals, which can't be deleted or merged as there may be dependent transactional data. You have first to delete the transactional data for this entity.
Then you can delete the time-dependent data and reoload it from your PSA.
BW will build then correct time intervals.
The easiest is to change the time interval in PSA, see example below:
At the moment the time interval is not accepted. But you can add time intervalls before 31.12.2011 and after 01.07.2013, Then system will create remaiing time intervals, e.g. your new record is:
HR Entity
Start Date
End Date
X
01.08.2013
18.12.2013
Result will be:
HR Entity
Version
Date from
Date To
x
A
19.12.2013
31.12.9999
x
A
01.08.2013
18.12.2013
x
A
01.07.2013
31.07.2013
Regards, Jürgen

Updating the Master data Infoobjects attributes from the Portal

Dear All,
There is a requirement where through portal i want to retrive the master data infoobject ( based on the value seleceted for that infoobject by the user ) and its attributes in the portal , edit them and save them back so that the updated values goes back to BW master data infoobject data base tables and updates the value.
Eg . I have Natural Account master data infoobject in the BW with attributes fucntional area and expense center.Based on the user selection of any values for the Natural account lets say 01110 , then for 01110 natural account the portal should display the correspoding attributes values of fucntional area and expense center.Lets take this values as 10 , 20 respectively for fucntional area and expense center . What I want to do now is to change these attrbute values to 30 and 40 and I would like to save it back as the changed attribute values for that natural account for 01110 with new attribute values 30 & 40 respectively for fucntional area and expense center .
Is this possible through portal and BW?
Any idea on this would be appriciated.
Regards,
Ankit

Hi Ankit,
this is a quite tough but not impossible requirement. Maintaining Master data is possible with Visual Composer and some function modules (at least that's one way I know). However it could be a bit complicated maintaining attributes Master data depending on your data model. This How might help getting familiar with this topic:
Maintaining BI Master Data with SAP NetWeaver® Visual Composer
Good luck.
Brgds,
Marce

Assign master data attribute value to Time Infoobject in Transfer Rule Rout

Hi Experts,
I want to assign value for Time Infoobject ZTIME from a Master data Infoobject's attr. The value for this ZTIME exists as an attr of Infooject ZMMM. I want to do at Transfer Structure level so that the assigned value can be used for another calculation in the update rule..
Any help on the routine is highly appreciated.
Thanks,
DV

Hi Edwin,
After making the changes as u suggested, i tried to activate the transfer rule, but Iam getting the following eerror msg
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        6,083
Message:    Statement is not accessible.
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
How can Iresolve this?/ Why is this happening??
DV
Any Help???
null

Overwrite data of master data infoobject

Hi all,
We have one master data infoobject ZASRYHMA. This infoobject does not have any attrbiutes but it has two compounding fields ZSITE and 0DISTR_CHAN.
Now customer has a requirement in which value of ZASRYHMA can change for a particular site and distribution channel. Generally if this value changes then system creates a new entry in tables /bic/pzasryhma and /bic/szasryhma.
What they want is to overwrite the existing entry.
Is it possible to achieve? It's a master data infoobject.
Please provide your kind help.
Regards,
Nilima Rodrigues

Hi,
You have three fields as key field in table as shown below along with values,
ZASRYHMA     ZSITE         0DISTR_CHAN
A-1                     B-1            C-1
A-2                     B-2            C-2
now if you want to change the value of say second row to
A-3                    B-2             C-2
right?
This is not possible just by overwritting in the info-object master data. Because these are key-fields system will treat A-3 as new value and create new entry, on top of this your A-2 master data values must have been used in transactional data.
Only way I can think of is to delete the transactional data where ever A-2 is used and then delete ZASRYHMA master data and then upload master data for ZASRYHMA with new values. And then transacional data.

Data load stuck from DSO to Master data Infoobject

Hello Experts,
We have this issue where data load is stuck between a DSO and master data infoobject
Data uploads from DSO( std) to master data infoobject.
This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
Now when we are doing full load via DTP the load is stuck and is not processing.
Earlier it took only 5 mns of time to complete the full load.
Please advise what could be the reason and cause behind this.
Regards,
santhosh.

Hello guys,
Thanks for the quick response.
But its nothing proceeding further.
The request is still running.
earlier this same data is loaded in 5 mns.
Please find the screen shot.
master data for the infoobjects are loaded as well.
I can see in SM50 the process at P table of the infoobject the process is.
Please advise.
Please find the detials
Updating attributes for InfoObject YCVGUID
Start of Master Data Update
Check Duplicate Key Values
Check Data Values
Process time dependent attributes- green.
No Message: Process Time-Dependent Attributes- yellow
No Message: Generates Navigation Data- yellow
No Message: Update Master Data Attributes - yellow
No Message: End of Master Data Update - yellow
and nothing is going further in Sm37
Thanks,
Santhosh.

Error while loading to master data infoobject hierarchy (0RPM_PORT_ITEM_HIERARCHY)

Hi All,
I have an issue while loading the data from psa to master data infoobject.
DTP Error:
When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
Thus it is throwing an error while populating this data to the target.
From where this field will fetch the values?
Why these values are not being populated from ECC?
Will there be any issue from BI side? can anyone help me on this.

Hi Raman,
yes I had extracted data in RSA3
There are no values for the field "object".
Do you have any idea why these values are missing?

Not appear the value when i execute the report

Hi, what reasons could be:
appear "#" instead a value for example "100", but only forthe records of the last load, the other records of another loads are ok, the report show
Infoobject value = 200
KF = 1,
but for the last record in the query
Infoobject value = #,
KF= 1
in the cube exist this record, it not must be # , is 100, the only thing that i did was change an attr Nav, of this infoobject, just mark the check of lowercase allowed,
i dont know what can i do to solve this problem that i made i m sure because i execute this report yesterday and it was ok....
help

i reactivate the Master data,
i was checking and this Infoobject has 10 records in the cube and in the KF that i evaluate has record 1 = 1, record 2= -1, you know, and the others records that appears in the report has just 1, i guess this happend because i run the Delta load twice, i have just to load only one record trought Repair load and now appear ok in the report, but the problem is i can do this repair for all the records because it works with delta, and the delta works wrong....

Master data: Text is not getting displayed

Hi Experts,
There is one Infoobject 0EMPLOYEE..It is the master data.I am loading the attributes and texts for the same..I am loading this object thru Direct Update.When I go in the Maintain Masterdata...there I am not able to see the text..I have selected Medium Description..But text is there in the T table..
Please help me out as what can be the problem..
Thanks,
Shalaka.

Hi Shalaka,
You need to activate that particular master firstly, inorder to make the changes reflect in the maintain master data.
and as you are saying the text text is visible in Report,so it might
be a problem of refreshing as well.
Regards,
Umesh.

Master Data is in Revised Version while transporting a request to add an attribute in existing master data infoobject

Hi Experts,
I am facing short dump when trying to send a request to add an attribute in Master Data Infoobject from DEV to QA.
Although the attribute is getting added to main Master data Info object but main master Info object is in Revised Version.
I have been searching the solution in SCN from couple of days and tried every single solution but none of them works for us.
When I check in se09 I am getting the following message
Program terminated (job: RDDEXECL, no.: 09445401)
 Execution of programs after import (XPRA)
End date and time : 20150420094559
Ended with return code: ===> 12 <===
When checking in ST22 IN QA I am getting the following message
The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSDD_DS====================CP' has to be
terminated.
When I checked in ST22 in QA I am getting following dump
 31 RAISE EXCEPTION TYPE cx_rs_program_error
 32 EXPORTING
 33 text = 'Invalid DSO subtype'. "#EC NOTEXT
 34 ENDCASE.
 35
 36 * get table name from DDIC
 37 CALL METHOD cl_rsd_odso=>get_tablnm
 38 EXPORTING
 39 i_odsobject = n_infoprov
 40 i_tabt = l_tab
 41 IMPORTING
 42 e_tablnm = l_tablnm
 43 EXCEPTIONS
 44 OTHERS = 1.
 45
 46 IF sy-subrc <> 0.
 47 RAISE EXCEPTION TYPE cx_rs_program_error
 48 EXPORTING
 49 text = 'Error in CL_RSD_ODSO=>get_Tablnm'. "#EC NOTEXT
 50 ENDIF.
 51
 52 CALL FUNCTION 'DDIF_NAMETAB_GET'
 53 EXPORTING
 54 tabname = l_tablnm
 55 TABLES
 56 dfies_tab = l_t_comp
 57 EXCEPTIONS
 58 not_found = 1
 59 OTHERS = 2.
 60 IF sy-subrc <> 0.
>>>>> RAISE EXCEPTION TYPE cx_rs_program_error
 62 EXPORTING
 63 text = 'Error in DDIF_NAMETAB_GET'. "#EC NOTEXT
 64 ENDIF.
I have attached the short dump
Thanks In Advance
Rashid

Hi Tom
Thanks for your reply.
I am not sure what do you mean by Manually activated in Dev or QA . If you mean Dev then i did and also maintain the infoobject related tables using transaction SE14 but still same error.
But if you mean in QA then QA is lock for manual activation but i tried though program RSDG_IOBJ_ACTIVATE but again failed. I also maintain the infoobject related tables using transaction SE14 but still same error.
Regards
Rashid

Master data infoobject values not presneting in the report

Similar Messages

Maybe you are looking for