Master Data Infopackage asks for a transport
We loading Master data Texts into an infopackage via a flat file. This is a daily process and it worked fine till yesterday. The current problem is whenever this file is specified and schedule to start the job is specified, it is asking for a transport Number. Nothing in the infopackage has changed. No changes has been made on how the client is set up in SE06/SCC4.
Any ideas why a data load asking for a transport Number.
Thks
Hi Hemal,
This is which system - production?. I guess then you would need to ask the Super user to create a transport request and add you as one of the users.
If it is development then follow this link:
Re: Why infopackage prompts for transportable request?
Bye
Dinesh
Similar Messages
-
System ask for a transport request while maintain IT0002
I'm getting strange message while maintaining IT0002 i.e system ask for a transport request. But while maintaining IT0008 or IT0009 etc it's not asking transport request. So while Diagnosis it is giving
Active integration to Organizational Management means that when a link to Organizational Management is created, it is saved automatically.
When saving organizational data, the data must be written to a transport request because, for example, the automatic transport recording is active. Without a correction request, the relevant changes in Organizational Management cannot be saved.Check the Tcode OOCR how the swich is active or not
later check with ur basis Guy once -
Master Data is missing for Specified Matierials at cube level !!
Hello Experts,
Good Day..!!
I have been facing an issue in my project, Master Data is missing for a KF and values are not displayed in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
Intially, i checked from Cube End and found the issue is in Cube level only.
For that in the data flow, i already checked whether the data has been loaded perfectly or not.
Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
Kindly advice how can i move further..
Thanks,
SN.Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth. -
Master data Lookup missing for sold to party
Master data Lookup missing for sold to party?
The look up flow is from E_BOM to E_BOM1
regardsHi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth. -
Master data Reorganization Process for a single InfoObject
Hallo Experts,
mayby someone else had this problem bevor us?
SAP-BWProducion: Master data Reorganization Process for a single InfoObject (selfmade), other InfoObjects worked fine.
SAP BW 7.0 SP20 or 21
This element has daily attributes and the Q-Table has actual 180Mio entries. We startet reorganisation with 250Mio. entries.
Because of the daily loading, we cancel the batchprocess in the evening and started it again in the morning. This was fine for about 5 days. We elliminate 80Mio entries.
Our destination would be 80Mio entries left.
Whenever we run this feature now - in a process chain - no entries were deleted after 30 hours working, and there were no counting-stastics in SM50
Sequentielles Lesen
Insert
Update
Delete
The five days before, we saw Mio's of entries in this statistics.
We have checked the Q-table and there exist a number of records which have the same attribute values across several records and the date from - date to values of these records are in a row.
RSRV is fine and we checked note 1234411 Master data reorganization - Performance improvement.
There are no other notes helping us.
Please give us a solution-idea.
Thanks
SantraHi Santra,
Could you please provide the solution for this?
Thanks
Vinod -
How make master data object available for ACR
Hi,
I remember that there is a program to run so that we can make the master data object available for ACR.
i am not getting the program name. Please advice.
Thanks,
DevHi........
If a master data is schedule for some changes...ie InfoObjects and hierarchies that are planned for structural change are selected by default.........If u go to RSA1 >> Administrator Workbench >> Tools >> Hierarchy/Attribute Changes from the menu...........If u click on Infoobject List or Hierachy List.........u will find that those infoobjects r already selected.....
If u want to run ACR for some infoobjects manually.............either u can do it in RSA1..........by only selecting those infoobjects for which u want to run the ACR..........or u can also use the prog : RSDDS_AGGREGATES_MAINTAIN.........
If that Particular infoobject is not there in the Infoobject or Hierarchy List in RSA1..............that means no structurak changes r required...........no need to run ACR..........
Regards,
Debjani......... -
No master data source mainatenance for object
Dear SDN.
I want to look for master data for object but it gives message.
No master data source mainatenance for object.
What is going on wrong.Hi,
When you are prompted for the infoobject in master data read you shoud give the main characteristic name, not the attribute name(attribute which is there in the data target). It will map the attribute automatically.
Regards,
Amruth -
Master data hierarchy synchronization for BPC NW 7.5
Hi all,
Here is my situation,
Trying to load master data and hierarchy for BW costcenter. Parent CostCenter hierarchy is 10001000.
CostCenter members are concatenated with Controlling area 1000.
I followed the master data and hierachy sycnhronization for 7.5 without any success.
I want to load only CsstCenter members without concatenatinon e.g. instead of 1000F1200, I want F1200.
Note thaI cannot use SUPPRESSCHARACTER 1000 as it suppresses other unintended values like 1000F1000
I need a method to truncate only first four characters
Please helo,
Kara.Vijay,
I am looking for suggestions on transformation and conversion files.
My current settings,
Transformation file:
NODENAME=IF(NODENAME(1:4)=STR(1000) then NODENAME(5:13);NODENAME)
HIER_NAME=HIER_NAME
PARENT=PARENT
ORDER=ORDER
Conversion file:
External: 10001000
Internal: PARENTH1
I get error: "Hierarchy nodes include dimension members that do not exist" -
Location Master Data Screen @ O401 for TSW
Hi IS OIL Expertise,
While creating Location Master Data@ O401 for TSW; I need to assign Transport System, Partner Role and material to Location, however I can’t see Location Hierarchy, Transport System, Partner Roles, and Material Tabs on Location Master Screen @O401.Could anyone please suggest me on this.
Please find the below snap
Thanks
ChandraDear Chandra,
Could you please check the Business Location Type screen customization from SPRO.
Industry Solution Oil & Gas ( Downstream) >> TSW >> Master data >> Business Location type.
Hope this resolves your issue.
Cheers,
Naresh. -
Using FF 4.01 for laptops & desktops, Windows XP 2002 SP3. I used "chrome://pippki/content/resetpassword.xul" to reset the Master Password. Then went to Tools/Options/Security, clicked on "Change Master Password". BUT it asks for my CURRENT password and new password. I don't know my current password. Is there a default Master Password that I need to input as the Current password?
If you still have a Master Password set then it looks that resetting the MP hasn't worked.
If using the chrome url (chrome://pippki/content/resetpassword.xul) doesn't work then delete the files [http://kb.mozillazine.org/key3.db key3.db] and signons.sqlite in the Firefox profile folder.
* http://kb.mozillazine.org/Profile_folder_-_Firefox.
You need to set a new Master Password after renaming or deleting key3.db and all currently saved passwords are lost. -
How to access Master Data in ERP2005 for SD
Hi All,
I installed ERP2005 in my system with MS SQL.
I do not know how to Access the Master Data in the system for SD.
Can anybody guide me.
Thank you,
Ravi.Hi Ravi,
Firstly, have you created any Master Data. If yes, you will be able to access the same.
Sales Order Management Transactions Codes:
<b>GENERAL ORDER MANAGEMENT</b>
Reviewing Document Flow VA03
Searching for a Customer Sales Order by Serial Number ZV11
Order Inquiry ZV33
<b>SALES ORDER PROCESSING</b>
Creating Sales Order VA01
Maintaining a Sales Order VA02
Displaying a Sales Order VA03
Releasing an Order or Delivery from Credit Hold: Non-Flooring VKM1
Releasing an Order or Delivery from Flooring Hold ZKM1
Manually Pre-authorizing Blocked Credit Card Orders Z.14
Display List of RMAs by Customer VA05
Confirm RMA Goods Receipt VL02
Generate list of open return orders for deletion VA05
Display Customer returns eligibility MCSI
Removing a Billing Block (Approving Credit/Debit Requests) V.23
<u><b>PRICING MASTER DATA</b></u>
Create Pricing VK11
Creating a Sales Deal VB21
Maintaining a Sales Deal VB22
Displaying a Sales Deal VB23
Maintaining Prices VK12
Displaying Prices VK13
<u><b>MATERIAL MASTER DATA</b></u>
Creating Material Substitution Master Data VB11
Maintaining/Deleting Material Substitution Master Data VB12
Displaying Material Substitution Master Data VB13
Creating a Bundled Master MM01
Creating a Sales BOM CS01
Maintaining a Sales BOM CS02
Displaying a Sales BOM CS03
<u><b>CUSTOMER MASTER DATA</b></u>
Creating Partner Records XD01
Maintaining Customer Master Data XD02
Displaying Customer Master Data XD03
Deactivating a Partner VD06
CUSTOMER CREDIT INFO
Creating/Maintaining New Customer Credit Information FD32
Displaying Customer Credit Information FD33
Blocking or Unblocking a Customer VD05
<b>SHIPPING</b>
Creating a Delivery VL01
Displaying a Delivery VL03
Deleting a Delivery VL02
Shipment Inquiry / Display VT03
Adjusting Transfer Order - Confirmation Quantity LT12
Collectively Confirm Transfer Order LT25
Batch Shipment Confirmation VL19
Creating Service Provider/Carrier Master Data XK01
Maintaining Serive Provider/Carrier Master Data XK02
Displaying Service Provider/Carrier Master Data XK03
Maintaining Product Master/Serial # Profile/Unit of Measure/Shipping Unit MM02
IDoc Inquiry WE02 / WE05
Workflow Instructions
<b>BILLING</b>
Invoicing a Customer Shipment VF01
Reprinting an Invoice VF31
Releasing a Sales Order for Billing V.23
Creating an Invoice by Using the Billing Due List VF04
Checking Open Billing Documents VF05
Create Credit/Debit Memo FB01
<b>A/R</b>
Controlling Total Debit/Credit bkgs F.03
Generate FI Account balance F.08
Generate Month-to-date Inv. register F.02
Process payments FBZ1
Rqst Individual Customer Corresp. FB12
Generate Customer Correspondence F.61
Enter Batch totals under Control ttl FB07
Display G/L Acct. totals FBL3
Reverse Posted Amounts FB08
Customer Refunds FBL6
Customer Refund to other than Payer FB05
Clearing Debit/Credit on Cust. acct. FB1D
Customer Balance in Local Currency F.23
G/L Account Balance Report F.08
Create Invoice - legal entity adjust FB01
Generate Cust. Acct. statements F.27
Generate Dunning Letters F150
Generate Billing Due List VF04
Generate Blocked Billing Doc list VFX3
Inq. via Credit Release Screen VKM1
List orders by partner VA05
Past Due invoices by customer FD11
Check number info by G/L account FBL3
Display customer Line items FBL5
TREASURY - CASH APPLICATION:
Post Customer payments FF68
Verify if A/R is updated FB03
Hope The above details helps you.
Regards,
Rajesh Banka -
Master data object - Available for reporting related
Hi Colleagues,
I want to load some 'duplicates' to info Object X. Meaning I have all values same but differ in one attribute. (Key is same). I do not want to use compounding for few reasons. I have not explored on functinality masterdata for reporting (Flexible update, not sure i used correct word) Can you please extend help in understanding the following..
Questions 1:
I understand that I can make available for reporting the existing master data object.
2) Can I add some code to allow duplicates there?
3) Can still the infoobjet navigational attributes has the same functionality - meaning they can be reported from reports of this newly extended masterdata?
Thanks for your time.
Best Regards,
HariHi Arun,
Thanks for your time..
Infoobject alread exists with out the attribute below at the monet. It is also available in the cubes for my reporting on cubes..I would like to add the following attribute for my phase 2 for my new reporting needs..
Data:
<u>Infoobject - Attribute,</u>
SKU1 - GRP1
SKU1 - GRP2
SKU2 - GRP2
The issue is with the 1st 2 records.. As I do not have the componding.. My Cube already have Infoobject with lots of data... I do not want to add attribute componding as it demands for the presence in the cubes also. So I have to double the current data base size.. Ahh I do not want this..
Coming to reporting on the cube
I would like to report on both the things.. Like..
Including attribute
SKU1 GRP1 abcd
SKU1 GRP2 abcd
SKU2 GRP3 xyz
excluding attribute
SKU1 abcd
SKU2 xyd
We do not have any keyfigures..none is related with time..
Hope I am clear..
Thanks for your time,
Regards,
Hari
Message was edited by: Hari Kiran -
Will master data propose values for transaction data where not maintained
Hi Friends,
If we haven't maintain certain chracteristic values in the Transaction record, the same maintaind in the master data......in the report does the system propose the value from Master data. If propose is there any settings do we have to maintaion in the BW System to act such like that.
For Example in the below Transaction record...........
Customer* Documenent No Sales Office Amount
ABC 1234 Mumbai 10000
XYZ 5 678 5000
Sales office haven't mainatined by the user for the record 5678.. Sales office is attribute for the Customer, In the Customer master evry customer mainatined with their sales offcie.Will it automaticcy propose from Master data.
Thanks & Regards
AnandHi
This can be done in a Individual routine.
First check if the "result" is empty. Else do a look up on Master data table of Customer.
Sample code :
Select customer and sales_off from Master data table of customer into itab in start routine.
In individual routine,
if result is initial.
read itab into xtab with key customer.
result = xtab-sales office.
endif. -
How to regularly update the Master data/Text/ Hierarchy for BW DEV?- Urgent
Hi Experts,
Can anyone help me to understand how to update the Master data/Text/ Hierarchy regularly for BW DEV.
Since all the new query developments are taking place in DEV, users are not finding the latest Masterdata/ Texts /Hierarchy in the DEV system.
I have searched in SDN and got a document "HOW TO DOWNLOAD A HIERARCHY TO A FLAT FILE". However, is there any other way to upload the master data automatically on periodical basis.
Please help urgently.
Advance Thanks,
BW USAIf you want to extract master data from PRD in order to load in DEV, i suggest to do this (its a tricky thing):
For example, you want to download 0EMPLOYEE
1-In PRD, transaction RSD1
2-Enter 0EMPLOYEE
3-Copy the Master table for 0EMPLOYEE (/BI0/MEMPLOYEE)
4-transaction SE16
5-Enter the table name /BI0/MEMPLOYEE
6-in the selection screen, go to "Options" Menu and select "User parameters", and now select "Standard List SE16"
7-Execute
8-Now its show's up the 0employee data, go to "System" menu - List - Save - Local File
9-After you have the flat file, only rest create Infopackae in DEV Env. and load it from the flat file.
Asigns points if useful.
Regards -
Master data related fields for DP, SNP and PPDS needed in Material Master
Hi Gurus,
Can any one please suggest or guide me what are the fields need to be done in Material master in ECC for SAP APO DP, SNP (heuristic with capacity leveling)& PPDS(Heuritic with optimizer).
Please it will be really great help.
Thanks in advance
Regards,
KumarHi Kumar,
For DP, many of the fields under MRP3, forecasting tab
views will be utilised more in material master of R/3.
For SNP, MRP 1, 2,4 and basic data views will be mostly
useful
For PPDS, Fields under Bom, routing, receipe, production
versions will be used along with few fields in material
master
Regards
R. Senthil Mareeswaran.
Maybe you are looking for
-
XML validation with DTD in java 1.5 not supporting
Hi, I am facing a problem regarding validation of xml file with DTD tag in it. I have disabled the parser through setValidating(false) method. xml file is not parsed in JRE 1.5.but it is parsed in JRE 1.6. Why this is showing such a behavior? I have
-
How to delete all contacts in my iphone?
some of you can help me? I sync a wrong list of contacts from my pc and now i would like to delete all my contacts in my iphone to sync the correct list.
-
Hi All, In my company, we are already processing Domestic Vendor Payments (USA) using ACH payment. We send EDI 820 to bank. Our company requirement is to process Foreign Vendor Payments also using ACH Payment. Could any one let me know what are the n
-
Convert Large Binary File to Large ASCI File
Hello, I need some suggestions on how to convert a large binary file > 200MB to an ASCI File. I have a program that streams data to disk in binary format and now I would like to either add to my application or create a new app if necessary. Here is w
-
Color Garbage displayed after first pdf opened?
Acrobat 9 Pro, part of CS4, version current, 9.0.0. Windows XP Acrobat 8 worked fine.... now load CS4 with Acrobat 9 Pro and problems develop displaying files. I open a pdf file, it always displays fine. I open a second pdf file, it display color gar