Master data infopackage error
Hi Experts,
i have one process chian in production system and it's a MD delta load Infopackage,it was running since 15 hours and failed.
i want to load data to this infopackage and there are 6 metachains under this failed infopackage metachain.
can you please give me ur advice.?
Full points will be assigned.
Thanks
Laxman
Hello Gandewar,
i don't have proper authorization to check those transactions in BW and ISU Source system.
This is a MD Attribute infopackage and i can't see the bad request in manager tab.can u tell me how to see the bad request.?
I think for MD ATTR datasources,we can't repeat the infopackage and we need todo init without datatransfer manually and run the delta infopackage again.so,that we can load the data.
please correct me if i am wrong.Do we need to do init with or without data?
As i told u ,there are several metachains are under this infopackage.?
Please guide me,how to do it.
P.S: It is a production system.
thanks
lakshmi
Similar Messages
-
Sap bw 7.3 master data load error
sap bw 7.3 master data load error
erroe: Exception in Substep RulesHi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan -
0EQUIPMENT MASTER DATA LOAD ERROR
Hi,
I am trying to load master data for 0EQUIPMENT in PM,an error occured saying
"The time interval ['20061203'/'20061203'] & (from/to) for the data
records 1 & and 2 & overlaps in characteristic 0EQUIPMENT &. "
Please give your suggestions to fix this error.
Regards,Check with the folks in the source system and find out why there are duplicate records. For a given period the keyfields can only appear once or else the load would fail. If it is ok (upon confirmation with functional folks) you can use the option of loading to PSA (3rd option in the infopackage) and then load subsequently to data targets & ignore duplicate records. But like I said, if I were you I would first try to find out why there are duplicate records before I start ignoring them.
Hope this helps. -
Material Master Data Loading Error
Hi All,
I am loading master data for material. i got the following error.
1. 0material_attr :
Record 1 :0MATERIAL : Data record 1 ('000000000000010220 '): Version '000000000000010220 ' is not valid
Process : If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
2.0material_text : Data record 1 ('000000000000010220E '): Version '000000000000010220 ' is not valid
Process : Same as above.
I have applied RSKC tcode in BI with ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX, and one special character string. but still getting the same error.
Regards,
Komik ShahHi All,
Thanks for the reply. i have solved most of errors. but there are some errors like this
Diagnosis
Data record 261 & with the key '000000000000132559 &' is invalid in
value '10x8x5 &' of the attribute/characteristic 0SIZE_DIM &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This allows to maintain your masterdata
which string i should have to add in RSKC to remove this error ? i have already added the ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX.
I have assigned points.
Regards,
Komik Shah -
Lock NOT set for: Loading master data attributes error
Hi experts,
We were encountering this error before when trying to load master data. When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again. We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE. I have read that it is possible this lock error happens when two change runs happen at the same time.
My question are:
1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
mark
Message was edited by:
Mark Siongco
Message was edited by:
Mark SiongcoHello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan -
Hi,
While loading the master data from R/3 below error message getting.
Error Message:DUMP:ABAP/4 Processor:ASSIGN_TYPE_CONFLICT.
Thanks,
Jayapal.hi,
Check..
/thread/261418 [original link is broken]
Data Load Short Dump (ABAP/4 processor: ASSIGN_TYPE_CONFLICT)
Also, Check..
OSS note 971584 - ASSIGN_TYPE_CONFLICT in the DTP program
Regards
Lavanya -
R/3 Master Data Load Error
Hi Experts
Our master data load from R/3 to BW was failed today.
This is the error message on status Tab of failed request
Diagnosis
No IDocs could be sent to the SAP BW using RFC.
System response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.
Further analysis:
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
I navigated through Environment -> Transact. RFC -> In source system"
In R/3 i got the following error
timeout during allocate / CPIC-CALL: 'ThS
#Timeout during connect
How shall i proceed now.
ThanksHi,
Check the RFC connection between R3 and BW. Use transaction SM59 for the same or take help from the BASIS team.
If that is correct check the EDI partner profiles, if they are active and functioning properly. You can take BASIS help here.
Cheers,
Kedar -
Hi Gurus
i am trying to run a data transfer process for BPARTNER but when i do it it gives me an error...that master data table is already locked..how to go about resolving it..points not an issueHi,
Goto tcode SM12, give the user as * and then execute it & in the next screen search BPARTNER
there it will show you the entries for locks on this infoobject if any....
It will show you the user who locked, the process (Eg: Change Run or some other data load) which locked & so on....
& then if needed delete locks....
And then try starting your load...
Rgrds,
Habeeb -
HR Master data serialization error
Hi,
I activated serialization on sender and receiver system:
(Transaction SALE -> Modelling and Implementing Business Processes -> Configure Predefined ALE Business Processes -> Human Resource -> Master Data Distribution - > Serialize HR Master Data)
After processing, some iDocs have status 51 - Serialization error for object &. Expected counter 000001 < 000002 in IDoc.
I understand that when I get iDoc with too big serialization counter the iDoc should have status 66 (IDoc is waiting for preceding IDoc (Serialization)) and I should be able to reprocess the iDoc when I get iDocs with missing serialization counter. Am I right?
So why do they have status 51 and not 66?
Thanks for answer in advance.there is some inconsistency in the receiver system.
for ex:
sender system Company code is different from the receiver system. etc...
Edited by: Ashok Kumar Reddy N on Feb 6, 2008 1:46 PM -
Hi all,
I'm working at a client where we upgraded from 4.6 to 6.0. This client has never used the master data export program.
I'm trying to configure the master data IDOCs, but I'm having an error when running the program RPCEMDU0_CALL. It refers to an OSS note back in 2001, so that really does not apply to this installation. The problem seems to be with function module HR_PU12_UPDATE_T532K_T532L on IT0106. Some sort of data dictionary discrepancies. I haven't been successful in finding any newer notes related to this.
Has anyone experienced this problem before?
Thanks in advance for your response.
CesarHi Bernd,
Thanks for your response. I looked at that OSS note but it doesn't seem to be realted to the problem I'm having.
The error reads:
"Export program terminated A009
Export program obsolete, regeneration required
Do not regenerate immediately: First make a $STRUC_P0106 back up of the include
PERNR N 000008 000000
(See note 375108) This include is very important if old cluster IF records"
I've re-activated the program and interface formats, but still getting the same error.
Thanks again,
Cesar -
Dear all,
I am trying to download HR Master data using FM gui_download.
In case of downaloading all staff data, I am getting incorrect no
of records in xls file though no of records internal table is accurate.
Also some of the records values are corrupt or incorrupt values.
As analysed , when any value in a record ends with '#' as mentioned below, It is already considered as TAB separtion,thus
ends with incorrect values in certain records
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = fname
filetype = 'ASC'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = table.
When I try with ' '( space ) as the separator in this FM , number of records are correct ,but not spread across in respective columns. I need to download in xls file with tab separation....
I appreciate your suggestion on this ....
Thanks
- MKHi Rob,
I have replaced those tab values with place before moving to function module.
still, I am getting the number of records to be less than what is in internal table in xls download.
There are records with genuine errors, which can be corrected.Still it is supposed to give atlease number of records to be accurate one.
Has anyone come across such issue while downloading master records
I appreciate ur help.
Thanks
- M -
Master Data Infopackage asks for a transport
We loading Master data Texts into an infopackage via a flat file. This is a daily process and it worked fine till yesterday. The current problem is whenever this file is specified and schedule to start the job is specified, it is asking for a transport Number. Nothing in the infopackage has changed. No changes has been made on how the client is set up in SE06/SCC4.
Any ideas why a data load asking for a transport Number.
ThksHi Hemal,
This is which system - production?. I guess then you would need to ask the Super user to create a transport request and add you as one of the users.
If it is development then follow this link:
Re: Why infopackage prompts for transportable request?
Bye
Dinesh -
0ASSET_ATTR master data load error
Hi all,
I got an error when i was loading the master data for Asset number.
The error message in BI side is: u201CThe error occurred in Extractoru201D.
When tried to check the data in the RSA3 extract checker their it was giving me short dump with error message as
*Runtime Errors CALL_FUNCTION_CONFLICT_LENG
Exception CX_SY_DYN_CALL_ILLEGAL_TYPE*
Short text: Type conflict when calling a function module (field length).
What happened?
Error in the ABAP Application Program, The current ABAP program "GP4A36CIW2A4S3VKUAJL657AX3F" had to be terminated because it has come across a statement that unfortunately cannot be executed.
A function module was called incorrectly.
*Error analysis: *
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was not caught in procedure "EXTRACTOR_FETCH" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is:
The call to the function module "ARBW_BIW_GET_MASTER_DATA" is incorrect:
In the function module interface, you can specify only fields of a specific type and length under "E_T_BIW_ASSET". Although the currently specified field " " is the correct type, its length is incorrect.
Thanks & Regards
PrabhakarThanks KK !!!!!!!!!!
Issue got resolved.
ASSIGNED POINTS.
Thanks & Regards
Prabhakar -
BW master data upload error..
Hi all.
Currently, Master data "OCOORDER attribute" was scheduled every morning.
However, this data hasn't been succeeded for two months.
After this data is running about 10 hours, I am receiving the following error message:
1. The attributes for characteristic 0COORDER are locked by a change run.
2. Error 1 in the update.
3. Lock NOT set for: Loading master data attributes.
We are using SAP BW 3.0.
In the monitor for Change Run program "RSDDS_CHANGERUN_MONITOR", even though this data wasn't successfully loaded,
it is showing following screen:
"Characteristics to be activated"
Did anyone of you have this problem before?hi,
yes realignment run must have been executed after master data loading. you are right, realignment and master data can't be processed in the same time.
0COORDER master data should not take 8 hours, it's too long, normaly master data should be in mins.
if you are in bw 3.x, you may try to use process chain,
here you can arrange realignment after all master data finished upload.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
hope this helps. -
Help needed please -Master data loading- error with text loading.
Hi,
Iam S.Sushma. Iam getting error while loading master data from flat file- attributes and texts.
I have loaded attribute data successfully. But when iam monitoring the text data then iam getting following error.
""SET THE LANGUAGE FIELD IN THE SOURCE SYSTEM-LONG TEXT.""
""RECORD1: SRPID_1:DATA RECORD 1(EN S):DUPLICATE DATA RECORD.
"ERROR 4 IN UPDATE"
I took 2flat files for attributes and texts.
SRPID is key field.(sales representative id)
attributes:- SRPID, NAME1, AGE1, ADD1,PHONE1.
text:- SRPID,LANG,SHTXT,MDTXT,LGTXT.
Iam just a begginer so need your guidence. Thank you in advance.
Message was edited by: sushma sandepogu
Message was edited by: sushma sandepoguHi Eugene,
Thank you for your guidence. I have changed the order in flat file and got the results successfully. But when iam viewing the Master data text the S10 in coming in 2nd position in maintain master data-list screen i mean :-
SRPID LANG NAME AGE ADD PHONE SHTXT MDTXT LGTXT
S1 EN ABC 34 GDS 1234 AS ASD ASDDF
S10
S2
S3
S9.
Iam not understading why. Hope yu can help me. I have assigned full points to you for your previous solution.
Thank you in advance.
S.Sushma.
Maybe you are looking for
-
How do i save an email on my ipad to a file on the ipad?
This is the second time I have submitted this question. I cannot now find where the original question went or any replies. I have an ipad 2 and I need to know how to save an email from my inbox on the ipad to a file, for later reading outside of the
-
JBOSS 3.2 & Kodo.rar
Hello all, I have a problem with jboss 3.2 & Kodo JCA. I can't deploy this product . exist any example the configuration file ? Carlos.-
-
Can I use the displayport to dvi and then plug that in to my old DVI to ADC adaptor and plug in my old (but still working!) 17 inch display?
-
Having trouble opening and installing Flash CS3
Hey there, I recently downloaded the Flash CS3 trial version for my mac, and after downloading it seems that i can't complete installation, because once its installed about 2 out of 3 parts it comes up with an installer alert, saying the following "P
-
Mysterious alert message from Finder
I have been getting this alert pop-up from the Finder application every 15min or so, even after restarting my computer and relaunching Finder. What could be the cause of this message and how do I stop it?