Master data into ODS

HI,
How do we load from master data infosource into an ODS , using datamart concept. can any one give me step by step details..
When i try to assign infosource to the ODS in the update rules...it says " INFO OBJECT 0recordmode missing from the infosource"
Thanks in advance
Message was edited by:

Hi Harshi,
Add 0recordmode in master data infosource and ROCANCEL in tranfer structure
also check this info,
Message RSAU128 'InfoObject 0recordmode missing is an information message, you can activate the update rules even without 0RECORDMODE. The field is required for the delta method of InfoSources with connected DataSources from an SAP R/3 system. For FlatFile DataSources or external DataSources InfoObject 0RECORDMODE does not need to be contained in the transfer structure of the InfoSource, or it does not need to be filled separately in the transfer rules. In the transfer rules when maintaining the transfer structure, the delta method for flat files or external DataSources is determined by field Update mode. In InfoSources that get their data exclusively from flat files or external does not need to be contained in the you can ignore the above-mentioned message when creation update rules."
Hope this helps,
Sudhakar.

Similar Messages

  • First Loading of Master data into ODS

    Hello BW gurus,
    I have read the below mentioned sentence in a material stating that
    'By using flexible updating, it is possible to write master data from different sources into a consolidated object (master data ODS object) before this is stored in individual master data tables.'
    1)  why master data from different sources is being written into ODS first , before it is stored in individual Master Data tables ?
    2) Is every master data from source systems first loaded into ODS  before it is stored in individual Master Data tables?

    hi,
    1) why master data from different sources is being written into ODS first , before it is stored in individual Master Data tables ?
    Ans - In real time scenarios y may have to load data from various source system (liks sap,non sap,flat file).also more than on r3 source system is also possible. hence to have consolidation of the master data based on source system we load master data to ods first. but is not always. one few master datas like - Batch number,delivery number,invoice number. u can also load directly to master data tables using direct update.
    2) Is every master data from source systems first loaded into ODS before it is stored in individual Master Data tables?
    not mandatory, it depends on requirement.
    Ramesh

  • Loading Master Data into ODS

    Hi,
         Can anyone tell me how to load the master data into the ODS?
    Thanks
    Yadav
    Edited by: yadav on Apr 12, 2008 8:04 PM

    Dear Yadav,,
    U can load the master data to ur ODS..
    The Process is same as loading Transaction Data into ODS but..
    1. U need to do  flexible Update instead of Direct Update...
    2. Maintain all the Attributes in ur DATA part...
    3. The record on which Updation depends should reside in the KEY FIELD section.
    But there is difference in loading master data to info object and ODS..
    If loaded in Info Objects..REusability is there.
    But in ODS no reusability...
    Hope this helps u...
    Assign points if helpful...
    Best Regards,
    VVenkat..

  • Extraction of the data from master data to ODS in the BW

    Hi,
    I have one question for all
    I need to be load the master data into the ODS.
    The scenario is need to load the data 0material_attr and 0material_text data into the ODS is it possible.
    If possible let me know what is the procedure.
    Thanks,
    Druthi

    Hi Rajesh,
    just create a custom DSO as posted in last pot.
    1 .go to the created DSO --> Edit --> right clickk the Key fieldsand choose "InfoObject Direct Input" -->  put 0Material
    2. go to 0Material --> Attribute tab and click ctrl+y and select the attributes by draggin over the fields names copy.
    3 .same thing : right click the " Data Fields" and "InfoObject Direct Input"  here you put the attributes you
    4 . add to the attributes following infoobjects 0TXTSH 0TXTMD 0TXTLG
    here you have you custom DSO all you need is to create two transformations to 0Material one with "Subtype of Object" Attributes and the second with texts.
    link --> activate --> create DTPs and load Data
    hope this helps,
    BR,
    Younes

  • Error while loading the master data into hierarchy

    Hi,
    When i am trying to load the master data into a hierarchy, it is showing me the following error.
    "Invalid Entry, hierarchy xxxxxx does not exist".
    Can you please tell me what might be the possible cause for this error.
    Thanks,
    Prateek

    Hello
    Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure 
    ->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
    Hope it will help!!
    Regards,
    Sandeep

  • Caller-70 Error while loading master data into infoobject

    hi ,
    I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
    Short dump in the Warehouse
    Diagnosis
    The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
    System Response
    "Caller 70" is missing.
    ST22 dump analysis is as below:
    Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in                  
    "VALUE_TO_SID_CONVERT_DB".                                                                  
    The main program was "RSMO1_RSM2 ".
    Please help as soon as you can..Production problem....
    Regards
    Rakesh

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • How to include the UDF of items master data into PLD (Inventory in Warehouse Report (Detailed))

    Hi,
    Is there a way to include the UDF in the items master data into the <<Inventory In Warehouse Report (Detailed)>> PLD?
    I checked the default layout and found out all the column source type is "free text" and the content is #Item, how do I know the value of the UDF?
    Thanks

    Hi,
    Some of the standard reports are hardcoded in sap. Not possible to add UDF field in PLD.
    Also refer this thread Variables -  Sap business one
    Thanks & Regards,
    Nagarajan

  • How to downlaod vednor master data into excel sheet in SAP Application serv

    Hi friends
    I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
    Please help me.
    Thanks

    Hi Ramesh,
    It is not possible to download data in Excel file on application server. You can better download the same in tab separated text file and then convert that text file to XLS.
    Please do not open multiple threads for same problem.
    Regards,
    Atish

  • How to downlaod vednor master data into excel sheet in SAP Application ser

    Hi friends
    I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
    Please help me.
    Thanks

    Hi Ramesh,
    You can download the data into application server using the following code. You will have the vendor details in the internal table. Then you will open a file and transfer the data as follows.
    *   Download internal table to Application server file(Unix)
    DATA: e_file like rlgrap-filename value '/usr/sap/tmp/file.txt'.     
      open dataset e_file for output in text mode.
      lOOP AT it_datatab......
        transfer it_datatab to e_file.
      ENDLOOP.
      close dataset e_file.
    In application server you will have only files and not excel sheets.
    Reward points if useful,
    Aleem.

  • Loading InfoObject master data into Cube

    Hi Guys,
    I have a  question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
    Data is being loaded into the InfoObejct. But when I check the cube there is no data.
    How do I load this master data into the cube without update rules?
    Thanks in advance.

    Hi,
    i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
    Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
    It depends upon your requirememt.
    Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
    In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
    As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
    Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
    In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
    You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
    You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
    You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
    Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
    Then just do the normal restrication at the report level
    You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
    then you can use it to restrict in the cube
    You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
    http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
    You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
    Regards,
    Hareesh

  • To load master data into infoobject 0mat_unit

    Hi Experts,
    Cud you pls give me any idea to load master data into infoject 0mat_unit from R/3.
    We need more than 10,000 master data into 0mat_unit. How can I collect data from R/3 for different attributes of infoobject 0mat_unit?
    I will assign full points for suitable solution.
    Thanks in advance!
    Sapna

    Hi Sapna,
    See
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm">DataSource in the SAP Source System</a>
    Udo

  • Load flat file data into ODS in BI

    Dear Gurus,
    How to load flat file data into ODS?. Please share the article if you have.
    advance wishes
    Thanks
    Venkadesh

    Please search the forums before posting :
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60debae1-84dd-2b10-e7bf-bdedf1eabdf9
    http://wiki.sdn.sap.com/wiki/display/BI/Beginner+Section

  • Loading Master data into BPS through layouts

    Hi SAP Gurus,
    Is it possible to load the master data into BI-BPS through layouts(in BI 7.0
    Thanks in advance.
    Regards
    Pradeep

    Hi Pradeep,
    if its combination of charactertics & keyfigures, then you need to load master data in Info objects(Characterstics) and for key figures you can load directly in the layout, once you save it , these values get saved back in Cube.
    Hope this helps
    Regards
    Imran

  • Loading Master Data into a DSO

    Hi Experts,
    I am unable to analyse whether loading data from Master Data InfoObject into a DSO will cause performance issues or will that work fine.
    I was trying to do the same.  Awaiting for your inputs on that.
    Thanks,
    Vijay

    Latha,
    Loading master data into a DSO can be done using the following steps:
    1) Right click on the DSO and select Create transformation... option.
    2) In the dialog box that appears, select Object Type as InfoObject and in the text box right below you give the name of the object.
    3) In Subtype of Object selection, select attribute or text as per your needs.
    4) select ok and you should see the transformation, map and activate the transformation.
    5) create DTP and run it.
    Hope this helps, [ you got my name wrong im vijay]

  • Can I reuse objects without Master data and load master data into it?

    Hai,
               I have a standard object that doesnot have Master data. Its already used somewhere else. It matches the name I want but I need to load some master data into it. Does resuing it in my catalogue and loading Master data into it hurt anything? Or should I create a new one?
    Thank you.

    Hi Visu,
    The same InfoObject can be included in more than one InfoObject catalog without any issue. Also loading master data would not hurt an existing InfoProviders where it is being used.
    Hope this helps...

Maybe you are looking for