Master Data is missing for Specified Matierials at cube level !!

Hello Experts,
Good Day..!!
I have been facing an issue in my project, Master Data is missing for a KF and values are not displayed in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
Intially, i checked from Cube End and found the issue is in Cube level only.
For that in the data flow, i already checked whether the data has been loaded perfectly or not.
Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
Kindly advice how can i move further..
Thanks,
SN.

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

Similar Messages

Master data Lookup missing for sold to party

Master data Lookup missing for sold to party?
The look up flow is from E_BOM to E_BOM1
regards

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

Master data text missing in reports

Dear All,
In my report, some text for infoobject master data is missing. When I see the text table of that, entry for the interval containing 31/12/9999 is not there. I checked in R3 and there also this entry is absent. This is fine and no issues. This is in BI Quality.
Same is not the case in Production. Here entry is there in BI for 31/12/9999 in text table but in R3 Prod, entry is not there.
My question:
How come the entry is there in text table in BI Prod for 31/12/9999 ? Has someone extracted it earlier when there was an entry in R3 or there could be some other reason ? If someone has extracted it earlier, and now in R3 prod, entry is not there, then this should immediately reflect in BI ?
Please clear my confusions.
Regards,
Srinivas

Fine with the answers. But how come the table in BI system is not in sync with the R3 ? Since the text is absent in R3 for the interval 31/12/9999, so it should be blank too in BI after the most recent update ? This is the property of master data.
Thanks,
Srinivas

Bank data is missing for country IN bank key SBIB0000003

Dear Friends
When i am start to print the cheque i am getting the error message
"Bank data is missing for country IN bank key SBIB0000003"
Please me suggestion
Regards
JK
Moderator: Please, avoid asking basic questions

Dear,
Please check in T-Code FI02, that
Bank Country = IN
Bank Key = SBIB0000003
Have you maintained any data there.
Please revert.
Br,VIvek

Master data Reorganization Process for a single InfoObject

Hallo Experts,
mayby someone else had this problem bevor us?
SAP-BWProducion: Master data Reorganization Process for a single InfoObject (selfmade), other InfoObjects worked fine.
SAP BW 7.0 SP20 or 21
This element has daily attributes and the Q-Table has actual 180Mio entries. We startet reorganisation with 250Mio. entries.
Because of the daily loading, we cancel the batchprocess in the evening and started it again in the morning. This was fine for about 5 days. We elliminate 80Mio entries.
Our destination would be 80Mio entries left.
Whenever we run this feature now - in a process chain - no entries were deleted after 30 hours working, and there were no counting-stastics in SM50
     Sequentielles Lesen
     Insert
     Update
     Delete
The five days before, we saw Mio's of entries in this statistics.
We have checked the Q-table and there exist a number of records which have the same attribute values across several records and the date from - date to values of these records are in a row.
RSRV is fine and we checked note 1234411 Master data reorganization - Performance improvement.
There are no other notes helping us.
Please give us a solution-idea.
Thanks
Santra

Hi Santra,
Could you please provide the solution for this?
Thanks
Vinod

How make master data object available for ACR

Hi,
I remember that there is a program to run so that we can make the master data object available for ACR.
i am not getting the program name. Please advice.
Thanks,
Dev

Hi........
If a master data is schedule for some changes...ie InfoObjects and hierarchies that are planned for structural change are selected by default.........If u go to RSA1 >> Administrator Workbench >> Tools >> Hierarchy/Attribute Changes from the menu...........If u click on Infoobject List or Hierachy List.........u will find that those infoobjects r already selected.....
If u want to run ACR for some infoobjects manually.............either u can do it in RSA1..........by only selecting those infoobjects for which u want to run the ACR..........or u can also use the prog : RSDDS_AGGREGATES_MAINTAIN.........
If that Particular infoobject is not there in the Infoobject or Hierarchy List in RSA1..............that means no structurak changes r required...........no need to run ACR..........
Regards,
Debjani.........

No master data source mainatenance for object

Dear SDN.
I want to look for master data for object but it gives message.
No master data source mainatenance for object.
What is going on wrong.

Hi,
When you are prompted for the infoobject in master data read you shoud give the main characteristic name, not the attribute name(attribute which is there in the data target). It will map the attribute automatically.
Regards,
Amruth

Master data hierarchy synchronization for BPC NW 7.5

Hi all,
Here is my situation,
Trying to load master data and hierarchy for BW costcenter. Parent CostCenter hierarchy is 10001000.
CostCenter members are concatenated with Controlling area 1000.
I followed the master data and hierachy sycnhronization for 7.5 without any success.
I want to load only CsstCenter members without concatenatinon e.g. instead of 1000F1200, I want F1200.
Note thaI cannot use SUPPRESSCHARACTER 1000 as it suppresses other unintended values like 1000F1000
I need a method to truncate only first four characters
Please helo,
Kara.

Vijay,
I am looking for suggestions on transformation and conversion files.
My current settings,
Transformation file:
NODENAME=IF(NODENAME(1:4)=STR(1000) then NODENAME(5:13);NODENAME)
HIER_NAME=HIER_NAME
PARENT=PARENT
ORDER=ORDER
Conversion file:
External: 10001000
Internal: PARENTH1
I get error: "Hierarchy nodes include dimension members that do not exist"

Master Data Infopackage asks for a transport

We loading Master data Texts into an infopackage via a flat file. This is a daily process and it worked fine till yesterday. The current problem is whenever this file is specified and schedule to start the job is specified, it is asking for a transport Number. Nothing in the infopackage has changed. No changes has been made on how the client is set up in SE06/SCC4.
Any ideas why a data load asking for a transport Number.
Thks

Hi Hemal,
This is which system - production?. I guess then you would need to ask the Super user to create a transport request and add you as one of the users.
If it is development then follow this link:
Re: Why infopackage prompts for transportable request?
Bye
Dinesh

How to access Master Data in ERP2005 for SD

Hi All,
I installed ERP2005 in my system with MS SQL.
I do not know how to Access the Master Data in the system for SD.
Can anybody guide me.
Thank you,
Ravi.

Hi Ravi,
Firstly, have you created any Master Data. If yes, you will be able to access the same.
Sales Order Management Transactions Codes:
GENERAL ORDER MANAGEMENT
Reviewing Document Flow VA03
Searching for a Customer Sales Order by Serial Number ZV11
Order Inquiry ZV33
SALES ORDER PROCESSING
Creating Sales Order VA01
Maintaining a Sales Order VA02
Displaying a Sales Order VA03
Releasing an Order or Delivery from Credit Hold: Non-Flooring VKM1
Releasing an Order or Delivery from Flooring Hold ZKM1
Manually Pre-authorizing Blocked Credit Card Orders Z.14
Display List of RMAs by Customer VA05
Confirm RMA Goods Receipt VL02
Generate list of open return orders for deletion VA05
Display Customer returns eligibility MCSI
Removing a Billing Block (Approving Credit/Debit Requests) V.23
PRICING MASTER DATA
Create Pricing VK11
Creating a Sales Deal VB21
Maintaining a Sales Deal VB22
Displaying a Sales Deal VB23
Maintaining Prices VK12
Displaying Prices VK13
MATERIAL MASTER DATA
Creating Material Substitution Master Data VB11
Maintaining/Deleting Material Substitution Master Data VB12
Displaying Material Substitution Master Data VB13
Creating a Bundled Master MM01
Creating a Sales BOM CS01
Maintaining a Sales BOM CS02
Displaying a Sales BOM CS03
CUSTOMER MASTER DATA
Creating Partner Records XD01
Maintaining Customer Master Data XD02
Displaying Customer Master Data XD03
Deactivating a Partner VD06
CUSTOMER CREDIT INFO
Creating/Maintaining New Customer Credit Information FD32
Displaying Customer Credit Information FD33
Blocking or Unblocking a Customer VD05
SHIPPING
Creating a Delivery VL01
Displaying a Delivery VL03
Deleting a Delivery VL02
Shipment Inquiry / Display VT03
Adjusting Transfer Order - Confirmation Quantity LT12
Collectively Confirm Transfer Order LT25
Batch Shipment Confirmation VL19
Creating Service Provider/Carrier Master Data XK01
Maintaining Serive Provider/Carrier Master Data XK02
Displaying Service Provider/Carrier Master Data XK03
Maintaining Product Master/Serial # Profile/Unit of Measure/Shipping Unit MM02
IDoc Inquiry WE02 / WE05
Workflow Instructions
BILLING
Invoicing a Customer Shipment VF01
Reprinting an Invoice VF31
Releasing a Sales Order for Billing V.23
Creating an Invoice by Using the Billing Due List VF04
Checking Open Billing Documents VF05
Create Credit/Debit Memo FB01
A/R
Controlling Total Debit/Credit bkgs F.03
Generate FI Account balance F.08
Generate Month-to-date Inv. register F.02
Process payments FBZ1
Rqst Individual Customer Corresp. FB12
Generate Customer Correspondence F.61
Enter Batch totals under Control ttl FB07
Display G/L Acct. totals FBL3
Reverse Posted Amounts FB08
Customer Refunds FBL6
Customer Refund to other than Payer FB05
Clearing Debit/Credit on Cust. acct. FB1D
Customer Balance in Local Currency F.23
G/L Account Balance Report F.08
Create Invoice - legal entity adjust FB01
Generate Cust. Acct. statements F.27
Generate Dunning Letters F150
Generate Billing Due List VF04
Generate Blocked Billing Doc list VFX3
Inq. via Credit Release Screen VKM1
List orders by partner VA05
Past Due invoices by customer FD11
Check number info by G/L account FBL3
Display customer Line items FBL5
TREASURY - CASH APPLICATION:
Post Customer payments FF68
Verify if A/R is updated FB03
Hope The above details helps you.
Regards,
Rajesh Banka

Transaction Data Icon Missing For FlatFile Datasource

Hi All,
We are loading the data by using the flat file data is loaded successfully.But beside the cube we will have activation icon , Aggregates Icon and Transaction data icon. In our case we are missing transaction data icon.What could be the reason.
But data loading is fine and for some of time chars also data missing .
Pls anybody can throw some light on this.
Thanks in Advance,
Shah.

Hello S SR,
How r u ?
just see the top and make the column adjustment like we do in MS-EXCEL you can see the Transactional Data ICON.
Best Regards....
Sankar Kumar
+91 98403 47141

Location Master Data Screen @ O401 for TSW

Hi IS OIL Expertise,
While creating Location Master Data@ O401 for TSW; I need to assign Transport System, Partner Role and material to Location, however I can’t see Location Hierarchy, Transport System, Partner Roles, and Material Tabs on Location Master Screen @O401.Could anyone please suggest me on this.
Please find the below snap
Thanks
Chandra

Dear Chandra,
Could you please check the Business Location Type screen customization from SPRO.
Industry Solution Oil & Gas ( Downstream) >> TSW >> Master data >> Business Location type.
Hope this resolves your issue.
Cheers,
Naresh.

Data is missing for Jan,Feb in 2008

Hi,
I have an issue with the report..The Concrete Profitability Report is using the manually uploaded rates for cost types. The business reported that the actual columns in the reports seem OK (since they come from the loaded amounts for the 12 months in 2008), but the budgeted amounts are showing a big variance and they don't look accurate bcoz the values are not calculated for Jan,Feb for 2008.The report runs based on multiprovider.
Perhaps the budgeted amounts for Jan and Feb in 2008 are missing.
Could yoy please let me know how can i proceed further and help me out in this issue.
Thanks
Sindhu

Hi,
Did u check in the respective cube whether the data is available for that period? check in the cube and also do LISTCUBE on multiprovider.
Khaja

Master data object - Available for reporting related

Hi Colleagues,
I want to load some 'duplicates' to info Object X. Meaning I have all values same but differ in one attribute. (Key is same). I do not want to use compounding for few reasons. I have not explored on functinality masterdata for reporting (Flexible update, not sure i used correct word) Can you please extend help in understanding the following..
Questions 1:
I understand that I can make available for reporting the existing master data object.
2) Can I add some code to allow duplicates there?
3) Can still the infoobjet navigational attributes has the same functionality - meaning they can be reported from reports of this newly extended masterdata?
Thanks for your time.
Best Regards,
Hari

Hi Arun,
Thanks for your time..
Infoobject alread exists with out the attribute below at the monet. It is also available in the cubes for my reporting on cubes..I would like to add the following attribute for my phase 2 for my new reporting needs..
Data:
Infoobject - Attribute,
SKU1 - GRP1
SKU1 - GRP2
SKU2 - GRP2
The issue is with the 1st 2 records.. As I do not have the componding.. My Cube already have Infoobject with lots of data... I do not want to add attribute componding as it demands for the presence in the cubes also. So I have to double the current data base size.. Ahh I do not want this..
Coming to reporting on the cube
I would like to report on both the things.. Like..
Including attribute
SKU1 GRP1 abcd
SKU1 GRP2 abcd
SKU2 GRP3 xyz
excluding attribute
SKU1 abcd
SKU2 xyd
We do not have any keyfigures..none is related with time..
Hope I am clear..
Thanks for your time,
Regards,
Hari
Message was edited by: Hari Kiran

Will master data propose values for transaction data where not maintained

Hi Friends,
If we haven't maintain certain chracteristic values in the Transaction record, the same maintaind in the master data......in the report does the system propose the value from Master data. If propose is there any settings do we have to maintaion in the BW System to act such like that.
For Example in the below Transaction record...........
Customer* Documenent No Sales Office Amount
ABC 1234 Mumbai 10000
XYZ 5 678 5000
Sales office haven't mainatined by the user for the record 5678.. Sales office is attribute for the Customer, In the Customer master evry customer mainatined with their sales offcie.Will it automaticcy propose from Master data.
Thanks & Regards
Anand

Hi
This can be done in a Individual routine.
First check if the "result" is empty. Else do a look up on Master data table of Customer.
Sample code :
Select customer and sales_off from Master data table of customer into itab in start routine.
In individual routine,
if result is initial.
read itab into xtab with key customer.
result = xtab-sales office.
endif.

Master Data is missing for Specified Matierials at cube level !!

Similar Messages

Maybe you are looking for