Master Data is NOT Loaded correctly, but PSA has correct data

Hi all,
    We have transported the Master Data Attribute 0CPR_PROJEC (cProjects: Project) from DEV to QA system. There is no problem with data in DEV, but we are having the problems in QA.
    In QA, the data is BLANK for couple of Attributes (RSA1 --> Right Click --> Maintain Master Data), but these Attributes are having the data in PSA level.
    We have verified the Transfer Rules & Update Rules and these are same in DEV and QA.
   What could be the problem, PLEASE?
Thanks in advance.
Regards.

Hi Venkat,
Could u pls tell me where u ran tha RS_TRANSTRU_ACTIVATE_ALL .so that if i get the same probs i will follow same steps
Regards
sneha

Similar Messages

Lost data on my iMac Cal, but iPad has the data.

I was fiddling around with email reminders on my iMac desktop, as you do...
To enable email reminders,I had to add iCal to iCloud, which I did.
Upon sync'ing, it reverted all my calendars to the last save, which was a couple of weeks ago. I have made a fair few changes since then.
However, my iPad has all the correct data still on it
But iTunes is set to replace data on the iPad calendars with data on the desktop. I need to reverse this but the sync starts immediately upon connection of the iPad to the desktop and there's no "Stop Sync" button.
How do I replace the desktop data with the iPad data of iCal? I cant see any way of exporting the iPad data either.
Help

Well, I solved the problem.
For any others with the same problem, this is what I did.
Connected iPad to Ddesktop and held down the apple/option keys to stop the auto sync
Went to iCal on the desktop and deleted all calendars.
In iTunes I ticked the "sync all calendars" in info whilst making sure that "Replace information on this iPad"
I, for some reason lost a couple of appts for the current day and had a couple of duplicate appts occur, but it was fairly painless.
So, good news.

PSA data change not loaded to the target.

Hi all,
We have the data in PSA (it is the master data)- while transferring the data from PSA to the target, system throws error - on analysing the error we found that the characters in the data is wrong, the same was corrected in the PSA - on reloading after correction to the target, system is ignoring the corrected records and loading only the other records.
What could be the reason for this behaviour.
Can experts help.
Regards,
M.M

Dear Mr.Goud/Murali,
Thank you for your immediate reply and instructions.
Mr. Goud,
The PSA QM status is only green but even then the corrected record is not loaded to the target.
Mr. Murali,
As per your information we do not have an Error DTP - i have only one DTP and we are in BI7.00 - I have deleted the request from the target and corrected the erroneous record and am trying to load only that record by using the filter option in the DTP - still the data is not loaded.
Can you suggest method of adopting - i am not able to understand why that corrected record is not loaded. Is it that manually corrected record in the PSA will not be loaded into the target?
Kindly clarify.
Regards,
M.M

Impact on transactional Loads if Master data is not loaded

Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21.
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?

Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa full repair.
Regards,
Rahul

Data is not Loading into Active data table on DSO in BI 7.0

Hi,
Iam loading data from a flat file to ODS in BI 7.0, the data is loading up to PSA and New data table , But the DSO is not activating, after all possible steps like, automatically setting/ manualy doing / through Process Chain....still unable to do it....Cud u pls tell the reason and solution.

Hi Sri,
Did you get any solution for this issue. Your input is highly appreciated.
We are also running on the same boat, I am using the End-Routine to fill up the 2 fields (one is Key figure and Characteristics) from one DSO to the other. In my case along with all other fields this key figure is also populating before and after the Activation of DSO. But the new Characteristics is populating in the update table (/BIC/A***40) before activating the DSO, once I activated the DSO the new characteristics is not filling up in the (/BIC/A***00), rest are coming without issues.
I built the same logic for other current data DSO (write optimized) from other DSO to fill the same fields with the similar logic in the end routine, it is up and running without any issues.
Thanks,
Dileep

Data is not loading into the target table in BODS

BODS job is executing successfully but data is not loading.
can anyone please let me know what is the problem
Regards,
Deva

Hi Deva
The Information provided is very limited, what are your Source and Target Databases?
What is the structure of the job design?
If the job completed without error, review the job logs to confirm that rows were indeed processed.
Regards
Charles

Page data does not load with goButton? (new window of identical page)

Hi guys. I ran into a problem. Essentially, I need to print a .jsff page but before I do, I have to alter its format a little bit. The solution I decided to use was to create a new .jspx page containing almost the exact same content. I even copied the data bindings and everything. Finally, I created a goButton on my original page like so:
<af:goButton text="Print as BOSSMON" destination="SubmitPrint.jspx?org.apache.myfaces.trinidad.agent.email=true"
                    targetFrame="_blank">
</af:goButton>This opens my page nicely in the format I want. But...there is no data on the page! It just opens a frame of the page. Can someone help me resolve this?
Otherwise, is there any other technique I could use to accomplish my goal?

Hi guys. Thanks to everyone for their suggestions. I finally got a working solution, something totally different from the suggestions.
My goal was to print a .jsff page nicely. But before I could do that, I needed to modify some data on the page. I also wanted to do this in as few clicks as possible. I tried the goButton technique but the binding data would not load. I couldnt figure out why.
Nonetheless, I finally managed to make my own version (albeit, not that neat!). I accomplished this by essentially making a template which automatically opens in showprintablebehavior format. I tried to follow a bunch of online tutorials/blogs but nothing worked for me. Here are the steps I used:
1) Creating a new .jspx page.
2) Copy the entire source of the .jsff page (the one which needs to be printed) into our new template .jspx page. (do have to modify the beginning parts by adding <af:document> <af:form> etc)
3) Create a pageDef for the template page and copy the entire pageDef as well (do have to change the name of the pagedef)
4) Modify your print template to your liking.
5) Add a taskflow rule that links the original .jsff page to the new template page
6) Add a commandButton on the original .jsff page which opens this printing page in a new window (remember to use "dialog:....."). Here is mine:
<af:commandButton text="Open Printer Friendly Version" id="printer_popup" action="dialog:edit_print" useWindow="true"
                              windowEmbedStyle="window" inlineStyle="display:block;"
                              windowHeight="100" windowWidth="100">
</af:commandButton>7) Now, in the printing template page, add a command button which simply has the showprintablebehaviour tag within it as well as a client listener to invoke some javascript. Here is what I used:
<af:commandButton text="Printer Page" id="sha_print">
    <af:clientListener method="do_loading" type="focus"/>
    <af:showPrintablePageBehavior/>
</af:commandButton>8) In the beginning of this page, you will have an <af:document> tag. Modify it so it sets focus to our print button above when the page loads. Like so:
<af:document id="d2" initialFocusId="sha_print">9) Now add a resource tag to your page which has the "do_loading" javascript method.
<f:facet name="metaContainer">
    <af:resource type="javascript">
          function do_loading(event) {
              var target = document.getElementById('sha_print');
              target.click();
              top.close();
              //alert("got focus sir!");
    </af:resource>
</f:facet>Thats it! What this does is when you click on the command button to open the printer template, our template page opens but as it opens, it automatically sets focus to the printer button using the document tag. The printer button has a listener which activates when it receives focus (in our case, as soon as the page loads). This listener invokes the javascript method, which progamatically clicks the printer button and closes this window. What your left with is a printer friendly page of your modified page!
All the data is present there too!
If anyone has any questions/comments, please do ask.

WLC Captive Portal not loading images or via HTTP correctly

Hi All,
I have a strange issue I'm hoping someone can shed some light on.
I have a CT2504 at a customer site which does not load the captive portal page correctly nor will it load via HTTP as opposed to HTTPS.
So for starters I did what I do with all my CT2504's (which work fine), I configured my Guest network to authenticate via the default captive portal. I then disabled HTTPS and SSH and enabled HTTP managment followed by rebooting the controller.
On boot, logging into the WLC management GUI is automatically presented via HTTP as expected.
However when clients access the Guest network they are redirected to the Web Authorisation via HTTPS instead of HTTP, any ideas?
In addtion to the above the captive portal page does not display correctly.
The preview via the controller works fine, but the client is presented with a page with broken links to the images i.e. the blue strip at the top and the Cisco logo on the right, any clue what's happening here?
Any help would be greatly appreciated.
Thanks,
Gary

Thanks Gray. I am glad it worked.
Rating useful replies is more useful than saying "Thank you"

CDC Error (JOURNALIZED DATA is not loading into tartet database)

HI,
I have enabled source database for CDC and got green mark on source database model tables.
while inserting data into source, J$ tables updating JRN_SUBSCRIBER and other filed.
when I run the package/ interface JOURNALIZED DATA is not loading into target database.
i have implemented cdc for 7 source table.
and using JKM MSSQL Simple
and enable JOURNALIZED DATA in interface level.
and
source database is : MSSQL Server
Target Database : Oralce 11g.
please advice me.
thanks in advance.
Zakeer Hussain

Zakeer look into this link , -http://odiexperts.com/?p=1096 . Hope this helps.
also before running Can you right click on the Source Datastore and click on Journal Data and can you see the data ? and if still the data is not passing through ,in that case make temporary objects t- yes in LKM , IKM and debug and see at which step data is not flowing through and look if there is any filter or condition which is stopping it .
Still not able to figure out please tell us which step the data is not flowing through we will try to guide you.

Urgent::::Data is not loaded for a perticular info object in ods

Hi All,
We have loaded data into an ODS( 0PRC_DS01) in development server. It was successfully loaded into it all info objects.Reports were working well.
When we transported it to production, data loading was taking longggg time (15000 for 9 hours).So, we have done two things to improve the loading speed.
1) we have created an index based on the fields in the where clause RCLNT,RLDNR,RYEAR, DOCNR, POPER in JVSO1 table.
(JVSO1 is an R/3 table from where key data coming to datasource 0EN_JVA_2.)
2)We have updated the optmizer statistics.
Now the problem is, data is not loaded to one perticular info object JOINT VENTURE PARTNER in dso. Which was loaded successfully in development.
Please help us........We will assign points for helpful answers

Hi Chek in the transfer and update rules whether u mapped the fields with target and also check whether u have routine. and check whether the data is coming for that object from the source.
Khaja

AWM - After successull cube maintainance data does not load

Hi All,
After creating the cube when i maintain the cube the data does not load. I went back and looked at the mapping at the cube level and the dimension level and everything looks fine. Any clues why the data does not get loaded. Also, i did not recieve any error while maintaing the cube.
thanks

Hi,
I was able to resolve this issue. I did not map the cube properly especially the time dimension. Due to this the data did not get loaded in the cube. ReMapping fixed the problem.
Hope this helps other newbies..

Embedded Database - data does not load

Hello.
I am currently using NetBeans 6.5 and am experimenting with the CarsApp tutorial.
Whenever I create an application using the server database, the data loads automatically when the application starts.
However, when I create the application using an embedded database, the data does not load and I just get a blank table.
For more information, go to: http://forums.sun.com/thread.jspa?threadID=5366394&tstart=0
Thank you in advance!

I'm sorry, I didn't know it was so looked down upon.
I thought that since this topic pertained to both Destop Applications and JDBC, I could get the best and quickest answer if I posted in both.
Apparently, that was a mistake.
Thanks, anyways!

When turn wi-fi website is not loading fully but with internet cable is loading

when turn wi-fi website is not loading fully but with internet cable is loading how caa i solved this problem?

Hi,
What is your machine and its Operating system ? Do you have wireless network at home ? If yes, have you setup the connection between your laptop and the router yet ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Repository Data Store not initialized. Please activate the Repository Data Store by navigating to control center page.

Currently when navigating to Applications/Script Management in UCCX 8.5 I get the following error.
Error reading Scripts
Repository Data Store not initialized. Please activate the Repository Data Store by navigating to control center page.
Under Network Services in Cisco Unified CCX Serviceability I notice the following.
Cisco Unified CCX Database - Out of Service
Cisco Unified CCX Cluster View Daemon/Manager Manager/File Manager - Partial Service
Cisco Unified CCX Engine/Manager Manager/File Manager - Partial Service
Cisco Unified CCX Engine/Subsystem Manager/Unified CM Telephony Subsystem - Partial Service
Everything was fine when I went home before the Christmas break.
I've tried restarting the CCX Database service but it does not start. I don't want to reboot now as the call center is taking calls just fine. I can reboot tonight.

Hi
I've seen this on a couple of 8.x releases, and it recurs regularly on one 8.5 customer. Definately a bug. They're HA, so the primary DB tends to die and then it limps along with primary server doing call processing, and secondary running the DB.
Reboots clear it, I've not had chance to read the 75 pages of resolved caveats for SU4 yet to see if it looks like it's fixed :-)
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
You also may have to place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore

Master Data is NOT Loaded correctly, but PSA has correct data

Similar Messages

Maybe you are looking for