Master Data is not showing for 0Customer info obeject in the portal

Hi Experts,
I'm facing an issue with 0CUSTOMER Info object. When I tried to execute the query from Query designer(BI 7.0) it is not showing all the customers  in filter for 0CUSTOMER in WEB  but it is showing all values for other characteristics(i.e 0MATERIAL).
I tried to execute same query in Bex Analyser and RSRT but it is showing all  the customers list in filter for 0CUSTOMER. I have this problem in WEB only
Please suggest me why 0CUSTOMER is not showing all the values in WEB.
Thanks,
Jaypal

in WEB, all values wont be displayed in single page if the list is too long, There will be a button to navigate to the next page and select. Please check that.

Similar Messages

  • Why does Group created on Master console does not show any device count mapped on the managed Amp?

    Q: Why does Group created on Master console does not show any device count mapped on the managed Amp?
    A: When a group is created on master console it will be pushed to all the managed amp which is added with Manage group configuration enabled. The Group pushed to the managed amp will be created as Global group and you can create subscriber groups for the global group to which you will add the device into since we cannot add any devices into global group directly.
    Hence there is no device added to the global group, on the master console it does not show any device count for the groups that are created on master console. 

    Laura Quitugua wrote:
    Hi,
    I have syced my outlook email with my iphone 4s and ipad.
    Note that only the email account info (username, login, server)  is sync'd.
    The actual emails are not sync'd.
    Opening an email on one device does nothing on teh other devices.

  • Master Data Attributes not showing in InfoCube

    Hi Experts,
    I'm a little lost here. I have loaded the master data  for a field ZPARTY(data coming from  3 non-SAP sources S1, S2 and S3) with all its attributes. I have actovated it and I see it as well in the BEx.
    Now I have loaded related Transaction data and and I have ZPARTY in that InfoCube as well. Now I can see the attibutes showing up in InfoCube from S1 and S2 but not from S3.
    I have deleted the data and reloaded it as well. I made sure that the SIDS get generated as well and I can see SIDs as well but I do not see the data from S1 for the master data attributes.

    Hi,
    You can check the following things,
    1) In the infoobject maintainance screen on the attributes tab, just check that attributes coming from S3 are marked as Navigation attributes.
    2) Check whether they are time dependent or independent attributes.
    3) Once you load all the data check it in master data view of ZPARTY infoobject and make sure that all the data is active.
    4) If you are not able to see the data loaded then check the underlying mappings of infoobject from S3 to ZPARTY in transformation or transfer rule.
    5) Finally in infocube check that you have marked all the navigation attributes available for reporting.
    Regards,
    Durgesh.

  • Data is not displaying for 0customer and 0material

    Hi all,
    If you Select 0customer or 0Material and right click, select maintain master data, and execute, i will get data..
    but 0customer or 0material right click, select maintain master data, at the bottom u can see Maximum no.of hits if you take it off...and execute am not getting data..
    Please advice me..
    if am not clear please let me know
    thanks
    sidhartha

    <i>but 0customer or 0material right click, select maintain master data, at the bottom u can see Maximum no.of hits if you take it off...and execute am not getting data..</i>
    That is a required input here in Maintain Master Data unlike in Tables etc it can be left blank.
    You can just give a big number like 999999 and execute it to see all records.

  • Master Data Attr not showing in query

    Hi SDNs
    Iam having some queries in Bex  built by previous developer. We recently enhanced customer master by three fields. When I wanted to add it in queries, I can only able to see those address fields in one query rest of 5 queries are not showing the new enhanced attributes.in fact I cant see any attribute (eg: 0sold_to has 20 attributes but its just showing 0country as the attr) I dont know why the rest are not showing. Also, when I tried to create a new query, I can able to see all the attributes for 0sold_to , 0ship_to etc...but the existing query doesnt showing the attributes ? Does any body know why the attributes are not shwoing in current query / do i need to uncheck something / unhide something in Bex for the existing query...I want to add the new fields only in existing query,I dont want to create a new one...
    Thanks

    Hi Sam,
    If you go to the report and do Change query global definition then you should be able to see the new attributes on the left side of the query designer and then you drag and drop them on the right side. If your attributes are navigational then you will have to turn them on as navigational in the Cube/DSO too, then only you can see them in the query.
    Regards,
    Nikhil

  • Date picker not showing for datetime type in advanced search page

    Hi,
    I have an advanced search page in my SharePoint 2013 site. There is a property which is of type datetime. For that I'm not getting a date picker. I don't know why this is not working. It is showing the date picker in SharePoint 2010 but not in 2013. Can
    anyone help me on this? Thanks in advance.
    Thanks,
    Jawahar
    Im searching more abt me...........

    A date picker was never supported in Advanced Search.
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • Data does not show for forms created in 6.0 Pro, in 8.0 Pro and 10.0 Pro

    Greetings...
    Our company have several forms created using Acrobat 6.0 Pro.  We upgraded to 10.0 Pro, and noticed that the forms do open, with NO data (that was entered using 6.0 Pro).  We downgraded to 8.0 Pro, with the same result.  These fillable forms show up in 8.0 and 10.0 as blank forms (as though there was no data entered in the fillable fields!).  If you encountered this, and found a work-around, please post...   Thanks.

    We used Acrobat 6.0 Prof, to fill in the forms (fillable fields). We received the forms from Los Angeles County.  

  • Showing master data value in report for which no record in Infoprovider

    Hi,
    We have the following reporting requirement. The master data values , e.g. 0Customer should appear in the report for which no sales has taken place, i.e no record in Infocube.
    We have defined a multicube using Infoprovider & 0Customer Infoobject, but the report seems to show only values from InfoCube, not the values which are not there in infoprovider but are present in infoobject.
    Please suggest.
    Thanks & Regards
    Madhu
    00919830957798

    Madhu,
    There is a how to paper on how to do this. It available in the BW InfoIndex under Multiproviders and is called Slow Moving Inventory Scenario.
    https://service.sap.com/~sapidb/011000358700008387152002
    This document details out the process of reporting on master data values for which no transactions ahve been recorded. This is achieved by creating a MultiProvider on a Cube and InfoObject and then using teh record count property.
    Cheers
    Aneesh

  • Impact on transactional Loads if Master data is not loaded

    Scenario for your reference:
    The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21. 
    I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
    If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
    And how can i find out the impact and correct the transaction data if it does?
    Can any 1 help me with this?

    Hi,
    If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
    In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
    So, first load the master data and run the attrib change run process.
    After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
    If delta loads are there, you might need to performa  full repair.
    Regards,
    Rahul

  • BizTalk BAM Data is not showing

    In BizTalk 2010,  BAM Data is showing correctly.
    But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
    Event Log shows not any error.
    What I have to check for getting BAM data in 2013 ?
    Which configurations should I check ?
    Any kind of help would be appreciated.
    Prakash

    Prakash,
    There are two parts to it:
    Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
    Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
    If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
    If event log is clean, no data in
    TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step  which is deploying the tracking
    profiles may not have happened properly.
    Check the following article for help:
    Deploying and Undeploying Tracking Profiles
    How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • SAP workload monitor is not showing for particular date in Total Option

    Hi,
    In t. code ST03N (Work Load Monitor) data is not showing in option total for particular date but it is showing in all the instances.
    Please support
    Regards
    Ganesh Tiwari

    Hi Mamtha
    Does the same navigation work directly in the backedn? In RSRT?
    Pls try that, will halp narrow down your problem. WHether it is a data issue, whetehr it is a BW issue or whether it is a display issue.
    Regards
    Rajesh

  • I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    The TIme Machine volume does not have that checkbox.
    I think the issue is with your Finder...
    Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Then, restart, or log out and in again.
    (You will have to reset a few finder prefs the way you like them.)

  • Why change pointers for master data, why not change message?

    Hi Gurus,
    I have one doubt about Idoc.
    When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
    Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
    Your valuable input will be rewarded with suitable points!!
    -B S B.

    Change pointers are getting stored in the tables BDCP and BDCPS. As SAP suggests these tables should be as small as possible. And Master data are not much frequently changed data.
    As you compare with the transactional data, you need to change them many times in the real scenario. If we also process the transaction data via chnage pointer, these changes BDCP is getting more and more entries.
    RBDCPCLR is the program used to process the change pointer. If you have much data in the BDCP table, this program will take much time to run.
    So, we use the change pointers for the master data only.
    Regards,
    Naimesh Patel

  • All master data values not shown in query selections

    Hi
    I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
    I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
    As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
    Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
    Then I deleted the contents of the InfoCube. It still shows the original 25 values.
    The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
    The problem is the same in LISTCUBE
    I hope some of you can help we with this.
    Thanks
    /Karsten

    Hi Hari
    1) Reactivated the master data, said it was already active.
    2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
    I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
    I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
    Thanks for all the input guys.
    /Karsten

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Maybe you are looking for