Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta Salpe

Hi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe

Similar Messages

Master Data Loaded but not able to see.

Loaded master data successfully. Able to see it in P and M table, but not able to see when going thru Manage - Contents at InfoProvider level.
Many requests are available showing number of records Transferred and Updated.
What could be the possible reason?

Hi Sarabjit,
Welcome to SDN!!
You need to load the transaction data into the Info-provider to see the contents and not just the master data.
In case you have done the transaction load then you need to do the "apply hier/attr change" for the master data loaded. Goto RSA1 -> Tools(menu) -> apply hier/attr change -> Seelect your info-object and execute.
Bye
Dinesh

Master data loads Request not updated to any data target using delta

When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

Hi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM

Master data reading does not work

Hello,
Having as a source for a transformation an infosource, masterdata reading (i.e. enhance master data with attributes) produces less data records than a simple transformation without reading master data attributes.
Question: Is the reason for this behavior, that an infosource is no info-object based data provider as is written in the RKT docu?
Thank you + regards,
Ingo

Hi Ingo,
please open an customer problem message, since this seems to be a bug. It might be that it happens only in certain scenarios. Nevertheless it should be investigated by development.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

7.5 Hierarchy Master Data Load

Hi experts,
I am trying to load material masterdata with a hierarchy.
When I was loading my members I applied an attribute filter.
It loaded OK and loaded the hierarchy nodes ok.
Then as I went to load the hierarchy it gave me an error saying that "Hierarchy nodes include dimension members that do not exist"
When I checked through the log I could see that the "missing" members where all the ones that I had filtered out with the attribute filter.
But it seems the hierarchy load needs them?
Is there a way to apply the same filter in the hierarchy load? Or any other way around this?
Or can an attribute filter only be used if you are not loading hierarchies?
Thanks

Hi Joergen,
Thanks so much for your quick reply.
My problem is not that my nodes don't load. They do actually come through fine in my first master data load.
But then when I load the hierarchy BPC complains that the node I want to now create as parents has members that don't exist in BPC. These are basemembers, not nodes.
For example:
BW:
Parent A:
   Child A
   Child B
   Child C
BPC
I only load Child A and Child B because Child C does not meet the attribute filter
When I then load Parent A I get an error that Child C is missing?
Regardless I tried your method and it didn't work for me?
-First I loaded my members only with the attribute filter - no problem
-but then I put in a rubbish filter like you said and ticked to load the hierarchy nodes. When I choose the AND filter nothing is being loaded at all. when I choose the OR filter it loads everything (incl the members that I excluded in the first load)?
Did I understand that wrong?
Thanks
Sabine

Master data load: texts are not loaded

Hi friends,
Trying to load BW Hierarchy(0COSTCENTER) to BPC dimension(P_CC).
Loadedd master data & text data using package "Import master data from BI infoobject"(/CPMB/IMPORT_IOBJ_MASTER), but EVdescription (texts) are not uploaded ino BPC dimension (P_CC).
Because of above error, when i try to load hierarchy(0costcenter), sytem throwoing one more error(JScrpit evaluation error).
Now i want to load texts into P_CC. ours is bpc 75nw sp10.
Found 2 notes, but these are related to older support packges
1462732 u2013 DM: text node descriptions canu2019t be imported.
1531601 - Incident 737084 / 2010 / text nodes aren't loaded
Transformation file:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=-1
ROUNDAMOUNT=
*MAPPING
ID=ID
CURRENCY=0OBJ_CURR
*CONVERSION
DM package run:
Infoobject: 0COSTCENTER
set selection: Attributes Controlling area = SP00
                       Hierarhcy: import text node(yes), selected hierarchy, version(empty),memberid(SP001170),level(not filled)
                       language: English, medium description,
                      attiribute list: currency(0OBJ_CURRENCY),controlling area
fileter by attributes or hierarhies option selection,
Mode: Update
Format: internal
Dimension: P_cc
package ended with error
Failed to write text of master data; check the error message
checked BPC dim, only member ID & currency is updated, but not evdescription.
Can you please share valuable inputs.
thanks,
naresh

resolved problem.
Packages given bpc7.5 nw sp10 are is exactly working.
Mapping section:
ID=0CO_AREA+ID
CURRENCY=0OBJ_CURRENCY
becoz base members are automatically added with controlling area in BW hierarchy on 0costcenter.
Followed method given in how to guide.

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Master Data Load - Number records not match

I am loading the 0PLANT table. In R3, it shows 966 records. After running the InfoPackage, there are 966 records in the PSA, none in error. But I get a message - Number of records requested does not match number transferred (packet 1).
This is a first use of a new source system to this BW. All master data loads give me the same error.
What is setup wrong?

Hello RoberT,
& How r u ?
For the same 0PLANT we load data on daily basis. Not only for this but also for more Master Data Objects. For some of them we used to get this message but not as an Error. On pressing the Update Tree (Refresh) it will change the status.
Anyway u got the records in the PSA so there is no problem with the data load. What signal u find in the Monitor ? Yellow or Red ? If yellow wait for some time, press Update Tree.
Best Regards....
Sankar Kumar
+91 98403 47141

Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

Hi,
Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
T. Code is: /SAPCND/GCM
I need to load data on a file (extracted from 4.6) for service contracts.
I tried LSMW : for this transaction, recording does not work.
I am trying loading thru Idocs (LSMW). But that too is note really working.
Do we require some custom development for this , or is some SAP standard funcntionality available ??
Can anyone provide some valuable inputs one this.
Would appreciate your responses.

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

Error in Setting lock for Master Data Load

Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
Bala

Hi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP

Master data Load Failure

Hi All,
Could any body clearly explain the following options in the Info Package of master data Info Object with full update
Update data
1. PSA and then into Info Obejcts
2 . Only PSA   ( Update Subsequently in data targets )
      Data source trasfers no duplicate records
     Igonore double data records
While I am doing master data load with the 1 and 3 options I am getting same no of records updated in PSA but loadng is getting failured with the 1st option (Caller 01 02 .. 20 Messages ) .and request with 3rd option is success..
Thanks in Advance...
Regards,
Nagamani

Hi
U r master data might have the Dublicate records
select the PSA
and select the option
Ignore dublicate data records
IF you have the Deblicates
EX
CNO
1010
1020
1010
ITs not alowed the 1010 record
Regards

Master Data loading in BPC 7.5 with prefix

Hi Gurus,
I need a help in master loading in BPC 7.5
Currently we are loading GL account with prefix of A and controlling area(COA1)
BI:0000600000
BPC: ACOA10000600000
I have maintained logic in the transformation file as below. Z001 represents the hierarchy Node.
ID=IF(ID(1:4)=STR(Z001) then STR(A)+ID;STR(A)0CO_AREAID)
Now client has came with new requirement as below
                           BI                   BPC
GL Acc               0000600000     A_600000
GL Node             Z00113            Z001_13
GL Node             Z00213            Z002_13
For the above requirement i have maintained the logic in the transformation file as below. when running master data load package i got the error as
Line 755 :Command failed ; end position is out of record index
ID=IF(ID(1:4)=STR(Z001) then STR(Z001_)+ID(5:12);STR(A_)+ID(5:12))
I need your help in modifying the logic in the transformation file for handling the above requirement.
And also for handling two hierarchy Z001 and Z002.
Thanks
Mahesh

Hi,
Your command should like:
ID=*IF(ID(1:4)=*STR(Z001) then *STR(Z001_)+ID(5:6);*STR(A_)+ID(5:10))
Hope this helps.

Blank Row in table during Master Data Load

I am having some success with my master data loads, but when I maintain the master data I have noticed that every table has had a blank row inserted.
Does anybody know why and what I should do with the row (i.e. delete it)?

This blank row is by default created and you can no way delete it. Though you delete it, a new row with blank values will be appended. This is required for some technical reason while reading the table within ABAP programs.
This is applicable only for SAP tables and may not be required for custom developed ones unless you want to use this in screen programs.
Regards,
Raj

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Master data load gives dump with exception CX_RSR_X_MESSAGE

Hi all,
I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
We are on SP 12 in BI 7.0.
We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
with regards,
Ashish

Hi,
The log of the dump is given below.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 78
of the (Include) program "LRRMSU13".
Source Code Extract
Line
SourceCde
48
*... Nachricht an den Message-Handler schicken
49
50
*... S-Meldung wenn kein Handler initialisiert
51
DATA: l_type TYPE smesg-msgty,
52
l_zeile TYPE rrx_mesg-zeile.
53
CALL FUNCTION 'MESSAGES_ACTIVE'
54
IMPORTING
55
zeile = l_zeile
56
EXCEPTIONS
57
not_active = 1.
58
IF sy-subrc NE 0.
59
l_type = 'S'.
60
ELSE.
61
l_type = 'W'.
62
ENDIF.
63
64
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
65
EXPORTING
66
i_class = 'BRAIN'
67
i_type = l_type
68
i_number = '299'
69
i_msgv1 = i_program
70
i_msgv2 = i_text.
71
ELSE.
72
DATA: l_text TYPE string,
73
l_repid TYPE syrepid.
74
75
l_repid = i_program.
76
l_text = i_text.
77
>>>>>
RAISE EXCEPTION TYPE cx_rsr_x_message
79
EXPORTING text = l_text
80
program = l_repid.
81
ENDIF.
82
83
ENDFUNCTION.
I went to SM21 and went through the system log. There was a log with the following text ORA-20000: Insufficient privileges#ORA-06512: at
"SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
Thanks Oliver and Oscar, for replying.
regards,
Ashish

Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

Similar Messages

Maybe you are looking for