Master data load failure. RSRV check resulted in inconsistencies.

Hi...
In our production system, master data load to 0EMPLOYEE is failing every alternate day. When I check the same in RSRV, following checks are red:
1. Time intervals in Q table for a characteristic with time-dep. master data
2. Compare sizes of P or Q and X or Y tables for characteristic 0EMPLOYEE
3. SID values in X and Y table: Characteristic '0EMPLOYEE'
If I repair it, it becomes green and the load is fine. Next day the load fails again. When I check in RSRV, I get the same 3 errors. So, again I need to repair it. Let me know the permanent solution for this.
I ran the programs: RSDG_IOBJ_REORG and RSDMD_CHECKPRG_ALL but these fixes are also temporary. Moving a new version of the object from Dev to QA and then to Production is not preferable right now as this involves a high amount of visibility.
I know the SID tables and all are corrupted from the logs I see. But is there any permanent solution for this without transports?
Thanks,
Srinivas

Hi
Chk this link will help you: Master data deletion
Regards
Ashwin.

Similar Messages

Master Data Load Failure- duplicate records

Hi Gurus,
I am a new member in SDN.
Now, work in BW 3.5 . I got a data load failure today. The error message saying that there is 5 duplicate records . The processing is in to PSA and then to infoobject. I checked the PSA and data available in PSA. How can I avoid these duplicate records.
Please help me, I want to fix this issue immediately.
regards
Milu

Hi Milu,
If it is a direct update, you willn't have any request for that.
The Data directly goes to Masterdata tables so don't have Manage Tab for that infoobject to see the request.
Where as in the case of flexible update you will have update rules from your infosource to the infoobject so you can delete the request in this case.
Check this link for flexible update of master data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/37dda990-0201-0010-198f-9fdfefc02412

Master data Load Failure

Hi All,
Could any body clearly explain the following options in the Info Package of master data Info Object with full update
Update data
1. PSA and then into Info Obejcts
2 . Only PSA   ( Update Subsequently in data targets )
      Data source trasfers no duplicate records
     Igonore double data records
While I am doing master data load with the 1 and 3 options I am getting same no of records updated in PSA but loadng is getting failured with the 1st option (Caller 01 02 .. 20 Messages ) .and request with 3rd option is success..
Thanks in Advance...
Regards,
Nagamani

Hi
U r master data might have the Dublicate records
select the PSA
and select the option
Ignore dublicate data records
IF you have the Deblicates
EX
CNO
1010
1020
1010
ITs not alowed the 1010 record
Regards

Problem with Master Data Load

Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022     Re-schedule the master data load process to avoid such situations in future.
u2022     Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
Luis

Dear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2.     Follow instructions from OSS 632931 (tcode RSRV)
3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis

Error in Master data load because of ###

Hello,
I am getting an error in master data load.
The problem is ####### symbols are encountered in few records.
We have defined a formula to replace the ### with S in transfer structure.
But still it does not replace the #### symbols and gives error.
But when I insert the ####### symbols manually in PSA and try to load it is replaced with the formula definition and loads the data.
Suggestions required urgently
Thanks in advance
Ram

Hello srikanth,
Check the code below.
I have used it in the update rule to replace the #### symbol with A.
But when i check in debug mode it is not recognizing this symbol and sy-subrc ia always 4.
GV_STRING = COMM_STRUCTURE-/BIC/XXX
FIND '#' in R_STRING.
IF SY-SUBRC = 0.
REPLACE ALL OCCURRENCES OF '#' in R_STRING with 'A'.
ENDIF.
result value of the routine
RESULT = R_STRING
Thanks
Ram

Master data loading delta failed

Dear All,
For master data loading, last delta got failed. we tried the reason for the failure but we couldn't find it. we want to know how to do last request repeat delta.
Good day.
Thanks and regards
Arun S

Hi Arun
Check the data in PSA. You can find erroneous data in PSA and correct the same. Save the data in PSA. You can manually update the data from psa or in process chain just repeat the delta step. Before doing that delete the error request from the data target.
Hope this helps.
Edited by: Chandamita Sarmah on Jul 6, 2009 2:04 PM

How do we improve master data load performance

Hi Experts,
Could you please tell me how do we identify the master data load performance problem and what can be done to improve the master data load performance .
Thanks in Advance.
Nitya

Hi,
-Alpha conversion is defined at infoobject level for objects with data type CHAR.
A characteristic in SAP NetWeaver BI can use a conversion routine like the conversion routine called ALPHA. A conversion routine converts data that a user enters (in so called external format) to an internal format before it is stored on the data base.
The most important conversion routine - due to its common use - is the ALPHA routine that converts purely numeric user input like '4711' into '004711' (assuming that the characteristic value is 6 characters long). If a value is not purely numeric like '4711A' it is left unchanged.
We have found out that in customers systems there are quite often characteristics using a conversion routine like ALPHA that have values on the data base which are not in internal format, e.g. one might find '4711' instead of '004711' on the data base. It could even happen that there is also a value '04711', or ' 4711' (leading space).
This possibly results in data inconsistencies, also for query selection; i.e. if you select '4711', this is converted into '004711', so '04711' won't be selected.
-The check for referential integrity occurs for transaction data and master data if they are flexibly updated. You determine the valid InfoObject values.
- SID genaration is must for loading transaction data with respect to master data, to cal master data at bex level.
Regards,
rvc

Error in Setting lock for Master Data Load

Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
Bala

Hi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP

R/3 Master Data Load Error

Hi Experts
Our master data load from R/3 to BW was failed today.
This is the error message on status Tab of failed request
Diagnosis
No IDocs could be sent to the SAP BW using RFC.
System response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.
Further analysis:
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
I navigated through Environment -> Transact. RFC -> In source system"
In R/3 i got the following error
timeout during allocate / CPIC-CALL: 'ThS
#Timeout during connect
How shall i proceed now.
Thanks

Hi,
Check the RFC connection between R3 and BW. Use transaction SM59 for the same or take help from the BASIS team.
If that is correct check the EDI partner profiles, if they are active and functioning properly. You can take BASIS help here.
Cheers,
Kedar

Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta Salpe

Hi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe

Master Data Load to APO from SAP MDM through SAP PI

Hi SDners,
This is a Parts Master Data Solution for one of the Largest Auto Manufacturer where SAP MDM will be the central hub of all the Global and Local attributes of Parts . The subscribing system is SAP SCM APO . Please advice if there is any possibility of direct integration between APO -MDM through PI. Does PI has the standard IDOC types to communicate with APO.
Also does APO has some RFC/BAPI to do master data load for Product Master /n/sapapo/mat1
Thanks,
Prabuddha

Hi,
Check the LUWs in SM58 in source system and then execute it. Else check in BD87 and push the IDocs manually in ECC.
Thanks
Reddy
Edited by: Surendra Reddy on Feb 24, 2009 10:59 AM

Master data load gives dump with exception CX_RSR_X_MESSAGE

Hi all,
I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
We are on SP 12 in BI 7.0.
We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
with regards,
Ashish

Hi,
The log of the dump is given below.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 78
of the (Include) program "LRRMSU13".
Source Code Extract
Line
SourceCde
48
*... Nachricht an den Message-Handler schicken
49
50
*... S-Meldung wenn kein Handler initialisiert
51
DATA: l_type TYPE smesg-msgty,
52
l_zeile TYPE rrx_mesg-zeile.
53
CALL FUNCTION 'MESSAGES_ACTIVE'
54
IMPORTING
55
zeile = l_zeile
56
EXCEPTIONS
57
not_active = 1.
58
IF sy-subrc NE 0.
59
l_type = 'S'.
60
ELSE.
61
l_type = 'W'.
62
ENDIF.
63
64
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
65
EXPORTING
66
i_class = 'BRAIN'
67
i_type = l_type
68
i_number = '299'
69
i_msgv1 = i_program
70
i_msgv2 = i_text.
71
ELSE.
72
DATA: l_text TYPE string,
73
l_repid TYPE syrepid.
74
75
l_repid = i_program.
76
l_text = i_text.
77
>>>>>
RAISE EXCEPTION TYPE cx_rsr_x_message
79
EXPORTING text = l_text
80
program = l_repid.
81
ENDIF.
82
83
ENDFUNCTION.
I went to SM21 and went through the system log. There was a log with the following text ORA-20000: Insufficient privileges#ORA-06512: at
"SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
Thanks Oliver and Oscar, for replying.
regards,
Ashish

0distr_chan initial master data load, text missing

Hey: I am trying to do an initial master data load for 0distr_chan on text. The load is not successful. In the monitor detailed error message, it has red alert for transfer rules missing message, update missing message.
0distr_chan attibute is OK.
I am also having problems when loading 0salesorg on text. It fails also.
Can anyone give me a clue?
Thanks!

Hi, thank you for your answer. I am new to this system. Please give me more guidance.
To check on datasource on R3, I use transaction RSA6, underneath the SD-IO master data, I found 0DISTR_CHAN_TEXT with green text icon on the right. Is this a valid way to verify that datasource for 0DISTR_CHAN_TEXT has been activated OK on R3? I am not sure if there is any way for me to check if any transfer rules for the datasource has been activated OK on R3.
thanks!

7.5 Hierarchy Master Data Load

Hi experts,
I am trying to load material masterdata with a hierarchy.
When I was loading my members I applied an attribute filter.
It loaded OK and loaded the hierarchy nodes ok.
Then as I went to load the hierarchy it gave me an error saying that "Hierarchy nodes include dimension members that do not exist"
When I checked through the log I could see that the "missing" members where all the ones that I had filtered out with the attribute filter.
But it seems the hierarchy load needs them?
Is there a way to apply the same filter in the hierarchy load? Or any other way around this?
Or can an attribute filter only be used if you are not loading hierarchies?
Thanks

Hi Joergen,
Thanks so much for your quick reply.
My problem is not that my nodes don't load. They do actually come through fine in my first master data load.
But then when I load the hierarchy BPC complains that the node I want to now create as parents has members that don't exist in BPC. These are basemembers, not nodes.
For example:
BW:
Parent A:
   Child A
   Child B
   Child C
BPC
I only load Child A and Child B because Child C does not meet the attribute filter
When I then load Parent A I get an error that Child C is missing?
Regardless I tried your method and it didn't work for me?
-First I loaded my members only with the attribute filter - no problem
-but then I put in a rubbish filter like you said and ticked to load the hierarchy nodes. When I choose the AND filter nothing is being loaded at all. when I choose the OR filter it loads everything (incl the members that I excluded in the first load)?
Did I understand that wrong?
Thanks
Sabine

Automate Master data loads in BPC7(MS)

I need to update dimension members in SAP BPC7 (MS) from an external source.
The source system for my current project is BW, but if you have done any automated master data loads from any other system or even from a "temp" table please post your solution or tips.
Thanks!
Mez

Hi Mezert,
Would like to chime in with some of the things I've learned about this process over 3-4 years I've spent with BPC/Outlooksoft:
-- Automating maintenance of the dimension/master data might be the biggest single weakness of the BPC solution on the MS platform. It's one of the big reasons that the Netweaver platform basically replaces DTS/SSIS and has more direct linkage to BI/BW cubes and master data (InfoCubes).
-- It is also one a very common issue and in fact, you will have to deal with what the old-timers in BI call "slowly-changing dimensions" at almost every client eventually. For instance, you have a list of proucts/materials that every so often someone adds an item to. ...Well, before you can enter anything for it in BPC, you have to add the dimension member, of course.
-- So far, this challenge has been met by bringing in specialist DTS/SSIS experts in most cases who can employ the special "Custom Tasks" and build one of these packages to run in an automated way to populate the tables inside SQL Server and then execute the Admin MakeDim task to process the cube/application.
-- Usually the development/testing/deployment of these solutions is a non-trivial undertaking. It can be done, but there are peculiar challenges.
-- One example of a challenge is what happens if you need a dimension with > 65,000 members? Well, it can be created and populated by a DTS package, however, when you check the package and the custom task from the old Outlooksoft stuff out, you see that it CLEARS the entire dimension table before re-filling it. ...Yep, it wouldn't allow an "Append" function to run.
-- A second example of a peculiar challenge is that unless you update the Excel Dimension Sheet, you will have to do all the updates in SQL Server Mgmt. Studio and really won't be able to touch the BPC Admin again for that dimension.
Apologies for such a long post, but this is a fairly significant issue and I have to do a lot of research to piece together some of these things. ...If anyone else has something to add as a best-practice, please post.

Master data load failure. RSRV check resulted in inconsistencies.

Similar Messages

Maybe you are looking for