Master data Load for Substance Creation : Using BAPI in LSMW ?

Hi ,
Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
Appreciate your help and suggestion.
David

Thanks John.
I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
With Respect & Regards
David

Similar Messages

Master Data Load for New Attribute

Hi Users,
We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
Please suggest
Regards
Zabi

Hi,
The situation is:
Field x from source maps to
1. field y ( which was existing field ) and also maps to
2. field z which is the new attribute.
field y has to get updated for company codes 10 for example.
field z for company codes 30.
now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
Master Data Load for New Attribute

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

Hi,
Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
T. Code is: /SAPCND/GCM
I need to load data on a file (extracted from 4.6) for service contracts.
I tried LSMW : for this transaction, recording does not work.
I am trying loading thru Idocs (LSMW). But that too is note really working.
Do we require some custom development for this , or is some SAP standard funcntionality available ??
Can anyone provide some valuable inputs one this.
Would appreciate your responses.

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

Master data load for 0COSTCENTER (Cost Center) failing

Hi Experts
I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
(R) Filter Out New Records with the Same Key
(G) Starting Processing...
(R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
Could you help me on this one please.
Regards
Akshay Chonkar

Thanks All
I have got the issue resolved
The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
Everything is fine now thanks for your help.
Regards
Akshay Chonkar

Insert new Master Data Record for an InfoObject using a Function Module

Hi @ all,
is there any Function Module for creating a new master data record for an InfoObject? Implementing a FM for inserting a master data record into a master data table is done quickly. I think there will be problems with inconsistency implementing a FM using a simple "Insert" Statement. Isn´t it?
I know it is possible to maintain an InfoObject in RSA1 (Master data IO> right click>Maintain Master data>execute(F8)> ...) but I have another requirement for using a FM.
Thanks!
Regards,
Johannes

use this
RSNDI_MD_ATTRIBUTES_UPDATE

How to Run ebs adaptor data load for 1 year using DAC

Hi,
iam trying to Run the ebs adaptor data load for 1 year for procurement and spend ,Please let me know the parameter to set in DAC.
last extract date is set as Custom Format(@DAC_SOURCE_PRUNED_REFRESH_TIMESTAMP
Thanks

You need to set $$INITIAL_EXTRACT_DATE to a year ago. The LAST EXTRACT DATE is something used for incremental loads and you do not manually set that.
if this helps, mark as correct or helpful.

Regarding master data loading for different source systems

Hi Friends,
I have an issue regarding master data loading.
we have two source systems one is 4.6c and another is ecc 6.0.
First i am loading the master data from 4.6c to bi7.0.
Now this 4.6c is upgraded to ecc6.0.
*In 4.6c and ecc6.0c master data is changing.
After some time there is no 4.6c, only ecc 6.0 is there.
Now if i load master data from ecc6.0 to bi7.0 what will happen.
Is it possible ?
Could you please tell me?
Regards,
ramnaresh.

Hi ramnaresh porana,
Yes, its possible. You can load data from ECC.
Data will not change, may be you may get more fields in datasource at r/3 side, but BW/BI side no change in mappings structures are same. So data also same.
You need to take care of Delta's before and after upgrade.
Hope it Helps
Srini

Master data loading for 0material

HI Friends,
we have transported 0MATERIAL master data from development system to quality, while loading data in quality system i am facing below errror .
"Data record 1 with the key '********' is invalid in value '********' of the attribute/characteristic 0MATERIAL".
Kindly advice
Thanks in advance.

Hi Sandhya Rani Boya Hussainappa
just check the values for attributes and then if its case of spl char s just go 4
option as Ravi Suggested.
Mean while if it not possible then just go to the in fo pak and clcik on error
handling give 1000 in the box and say continue and start the load ..
Regards
R M K
**Winners don't do different things, they do things differently**
> HI Friends,
> we have transported 0MATERIAL master data from
> development system to quality, while loading data in
> quality system i am facing below errror .
>
> "Data record 1 with the key '*********' is invalid in
> value '*********' of the attribute/characteristic
> 0MATERIAL".
>
> Kindly advice
>
> Thanks in advance.

Need screen-shot for create mm01 using BAPI(Through lsmw or ecording)

hi,
could u give screen-shot of the lsmw using bapi.for material master data create using t.code (mm01')
i will be waiting for eply.
regards
eswar.

Check this link dude.....
http://www.****************/Tutorials/LSMW/LSMWMainPage.htm
It has all different types of LSMW with the screen shots.... keep doin
Regards,
Pavan

Sales order creation using BAPI in LSMW

Hi ABAPers,
I am trying to create Sales orders using the BAPI SALESORDER_CREATEFROMDAT2.
I am supplying the item target quantity in sale units to the field
E1BPSDITM-- TARGET_QTY. my documents are getting posted but when i go to VA03 to display my documents, the quantity is showing up as 0 for all items. and the document is incomplete.
please any suggestions on this.
Regards,
Raj

HI Raj M
jus refer the following link it has step by step procedure
http://sapbrain.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html

Material Master Creation Using BAPI

Hi,
I m using BAPI_MATERIAL_SAVEDATA for Material creation using BAPI.
Now the problem is , i have created a Screen exit long back in Purchasing view.. the corresponding Z field is created in table MARC..
How can i pass value to this Z field using BAPI.
i tried with BAPI_MARC.. my Z field is not coming in that structure.
Can anyone guide me how can this be achieved.
Thanks in Advance
Aravindh Mani

Hi,
The Function Module BAPI_MATERIAL_SAVEDATA has the options to pass the Z fields. There exits a structure parameters
EXTENSIONIN
EXTENSIONINX
in BPAI. In EXTENSIONIN pass the data and value part you can pass in EXTENSIONINX. So this will update the Z fileds in material
master .

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Master Data Load to APO from SAP MDM through SAP PI

Hi SDners,
This is a Parts Master Data Solution for one of the Largest Auto Manufacturer where SAP MDM will be the central hub of all the Global and Local attributes of Parts . The subscribing system is SAP SCM APO . Please advice if there is any possibility of direct integration between APO -MDM through PI. Does PI has the standard IDOC types to communicate with APO.
Also does APO has some RFC/BAPI to do master data load for Product Master /n/sapapo/mat1
Thanks,
Prabuddha

Hi,
Check the LUWs in SM58 in source system and then execute it. Else check in BD87 and push the IDocs manually in ECC.
Thanks
Reddy
Edited by: Surendra Reddy on Feb 24, 2009 10:59 AM

0distr_chan initial master data load, text missing

Hey: I am trying to do an initial master data load for 0distr_chan on text. The load is not successful. In the monitor detailed error message, it has red alert for transfer rules missing message, update missing message.
0distr_chan attibute is OK.
I am also having problems when loading 0salesorg on text. It fails also.
Can anyone give me a clue?
Thanks!

Hi, thank you for your answer. I am new to this system. Please give me more guidance.
To check on datasource on R3, I use transaction RSA6, underneath the SD-IO master data, I found 0DISTR_CHAN_TEXT with green text icon on the right. Is this a valid way to verify that datasource for 0DISTR_CHAN_TEXT has been activated OK on R3? I am not sure if there is any way for me to check if any transfer rules for the datasource has been activated OK on R3.
thanks!

Master data Load for Substance Creation : Using BAPI in LSMW ?

Similar Messages

Maybe you are looking for