Master data load issue with flexible data source

Hi All,
1CL_OLIS001have this data source for loading configuration data. the changed records are not updating into this DS regularly.
I have delta load on this every day. It loads correct data for one month and suddently it will start loading 0 records every day with out failing. If I reset the delta, it will work fine for month or two and then will corrupt again.
Is any one have this kind of issue before Please suggest to resolve this issue permanently?
Thanks and Regards,
Pooja

Hi Pooja,
1) It might be Database table space issue in the backround, Please checkit out with BASIS
Regards,
Marasa.

Similar Messages

  • Master Data source for sales district or Region in CRM

    Dear All,
    Please let me know the Master Data source for sales district or Region in CRM.
    Thanks
    Regards,
    Sai

    Hi Tiest,
    Thanx for responding.
    U r right, our clint is upgrading from 4.6 to ECC.
    So as per the clients requirements, we are maintaining all the configs for Services in CRM.
    Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
    What I am looking os some standard upload program.
    LSMW recording does not work.
    This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
    IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
    But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
    Till now, I am only able to define just one field name and a field value.
    I want this to word for mutliple entries.
    Hope u get my point.
    Thanx

  • How to find active master data source in the bw system

    Hi
    Can anyone guide me how to find the active master data source in the bw system

    Hi,
        You can use the table ROOSOURCE. The field ROOSTYPE specifies the type of datasource whether Transaction or attributes or text. You could write an abap program to filter the table and give you only master data datasources.
    Assign points if helpful
    Regards.

  • How to trace master data source (table-field)?

    Hello All,
    Please help, its Urgent!!
    I have the following 4 characteristic requirement in BW from PM/PS module.
    Master data source (format: table-field)
    AFVV-FSAVD - early start date
    AFVV-FSEDD - early finish date
    AFVV-SSAVD - late start date
    AFVV-SSEDD - late finish date
    can anyone tell me the procedure, how to find them in R/3 n if there r any standard business content for the same?
    Thanks in advance,
    JP

    Go to RSA5 Tcode in R/3, under SAP R/3 Application component, you can get PO/PS Components, and under that you can get PO-IO/PS-IO Components, here you can check all the vaialble master data datasources.
    KJ!!!

  • No master data source mainatenance for object

    Dear SDN.
    I want to look for master data for object but it gives message.
    No master data source mainatenance for object.
    What is going on wrong.

    Hi,
    When you are prompted for the infoobject in master data read you shoud give the main characteristic name, not the attribute name(attribute which is there in the data target). It will map the attribute automatically.
    Regards,
    Amruth

  • Which Master data Source is available for the field VBUK-GBSTK (Doc Status)

    Hi
    Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
    Please help me.
    Thanks
    Mannev.

    Hi
    Thanks for your reply.
    That is Transaction data source. I want master data source.
    Thanks,
    Mannev.

  • Which Master data Source (Attr) is available for the field VBUK-GBSTK

    Hi
    Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
    Please help me.
    Thanks
    Mannev.

    Hi Mannev.
    I don't think that you will find GBSTK in any master data source. It is however available in 2LIS_11_VASTH.
    Hope it helps.
    BR
    Stefan

  • Issue with Pro Res sources when encoding in Media Encoder.

    There seems to be a big issue with Pro Res sources in Media Encoder. I've noticed that when exporting using the 'software only' mode my graphics and titles look horrible, they are pixelated around the edges and the compression looks bad. This issue only happens when it's being made from a Pro Res source, if I make the exact same file Uncompressed this issue is resolved. If I use the 'Cuda' option (which I already know is the better option) this issue is resolved. The thing is, in a work environment not all of our systems are Cuda enabled and I would like to use Media Encoder as a exporting option overall. I love Media Encoder, it's fast and easy to use but this Pro Res issue is huge because the majority of the time we are working in Pro Res. I also did a test out of Avid Media Composer to Media Encoder, I sent a reference file referencing the Avid MXF material and the issue is gone, this seems to my knowledge to be a Pro Res only issue. The settings I am exporting to is 960 x 540 h.264 and also .mp4. This is coming from a 1080p source and yes I do have the 'maximum render quality' checked for best scaling. I understand that Software only vs Cuda and Open CL use different algorithms when scaling but this seems crazy to me that it would look  this much worse.
    Anyways if somebody can please look into this that would be great, this seems to be an issue where I can't continue at this moment to use Media Encoder. Making my source files Uncompressed every time to do an export is just not a real workflow I want to do.
    On a side note I've also recently noticed on a clip that had text over a grey background that there are lines going all down the screen evenly when exporting to even a non scaled 1080p .mp4. Once again, this issue goes away with any format but Pro Res. The weird part is this happens even with Cuda enabled. This is why I am thinking Media Encoder is having some sort of issue with the Pro Res codec.
    I am on a current new 27'' fully loaded iMac with the latest Adobe CC updates.
    Has anyone else experienced this?
    thank you

    No, it is why advance users do not use the wizard.
    Have a look at OpenOffice.org and its form creation. Once you add your fields in OpenOffice.org, just export to PDF and the form fields will be named just like you named in them in OpenOffice.org and the drop down values carry over.

  • Data load issue with export data source - BW 3.5

    Hi,
    We are facing issues in loading data with the help of export data source.
    We have created export data source of 0PCA_C01 cube. With the help of this export datasource,  we are loading data to other custom cube. Scenario is working fine in development server.
    But when we transported objects to quality server data is not getting loaded to custom target cube.
    It is extracting zero records.  All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs.  Every object is active but data is not getting extracted.
    RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development.   We are in BW 3.5 with patch level 19.
    Please guide us to resolve the issue.
    Thanks,
    Aditya

    Hi
    Make sure that you have relevant Role & Authorization at Quality/PRS.
    You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
    Hope it helps and clear

  • Data load issue with Master infoobject

    Hi Sdns,
    I have master infoobject and it has a list of time independent attributes. I have successfully loaded the dato to this master infoobject.This master infoobject is being used as a attribute  in some infoobjects  and as a infoobject in infocubes and DSO's.
    Now the requirement is changed and few  attributes of the master infoobject become  time dependent.when i have tried to delete the data in the master info object, some amount data i have deleted and am unable to delete remaining data.
    is it necessary to delete the data from all the infoproviders before deleting the data from master infoobject when the change is happened in its attributes.
    Advance thanks
    karunakar

    I guess no need to delete the master data for this change! ... if you want to uncheck the time dependent we must delete data
    But you can tick time dependent for the MD obj. and activate it... it will tell you for the deletion of data is necessary or not
    After this action you will see Date to and Date from in the transformations.. you can map them and do the load. .. it will overwrite the master data object

  • Facing problem with standard master data source *0bp_def_address_attr *

    Hi All,
    I am using BW 3.5 version
    I am loading master data form 0bp_def_address_attr(stabdard data source)  as part of my daily activities.
    this loading is failing frequently throwing following error message
    30 duplicate record found. 1243 recordings used in table /BI0/PBPARTNER
    ID : RSDMD
    message number 199
    Is there any way I can avoid this failure?How can I handle duplicate records?
    Please help me!!
    Warm regards
    Nanduri Aditya

    Thanks for your answers and sorry for my late reply
    Hi Srinivas,
    I am using  3.5  there is no ' handle duplicate records' option in info pacakge.
    Hi Francisco,
    Thanks for your answers,
    2 OSS notes are relevant to my problem. Currently I am checking in Dev whether it will fix my problem or not.
    Thanks a lot it was avery helpful answer.
    Warm Regrads,
    Nanduri Aditya

  • Language error while loading master data source for text

    Hi,
    We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
    "Error during multibyte alignment for language D (position 2)".
    Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
    Thanks
    VV

    Hey Vishal,
    If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
    Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
    Regards,
    Anjum.

  • Whats the difference (Generic Master Data Source vs Transaction Data Sce)

    Hi Gurus,
    I have been wondering on whats the difference when creating <b>GENERIC Data Sources:</b>
    1.) Transaction Data
    2.) Master Data
    Pls. dont give an answer like (<i>A Master Data Generic Data Source is used to populate Master Data Info Objects and Transaction data Sources are used to populate ODS and CUBES.</i>)
    This definition is <b>FALSE</b> since I can use a <b>"Master Data (Data Source)"</b> to populate my ODS.
    They only differ in Process Chain since the Action when loading data using <i>Generic Masterdata Data Source</i> is <b>Attribute Change Run</b>. Unlike when loading ODS using Transaction Data Source will use "<b>Activate ODS Data</b>".
    Hope Somebody will clarify this...
    --Jkyle

    Hi Jkyle,
    at the moment I think it is more or less a grouping information in BW and additionally a information for you, your users, ... what type of data is being loaded thru the datasource.
    With grouping I mean just a type of information used for the list that opens if you'll assign a datasource to a infosource.
    With type of data I mean some sort of classification of the data for a special application. I can imagine, that the same data can be used as transactional data as well as as master data depending on the application. A good example for this can be the header data. For some applications you have header (transactional) datasources providing a header counter and additonally you have the document number (basically the header information) with some attributes as master data.
    May be there is a difference in the function modules that are called to extract the data, I am not sure about this.
    Hope this help a bit.
    regards
    Siggi

  • Master Data Source Enhancement

    Hi Gurus
    I have a table in SAP which has customer, Sales Organization, Distribution Channel, Language (which is in EN always) and Customer Sales Text...
    The Customer Sales Text is maintained at Sales Organization and Distribution Channel level..below is the example of one record...
    Customer     Sales Org.     Distr. Channel     Lang.   Customer Sales Text
    123               01                  01                       EN        Blank (No text here)
    123               01                  02                       EN        Blank (No text here)
    123               01                  03                       EN        Blank (No text here)
    123               01                  04                       EN        Blank (No text here)
    123               01                  05                       EN        John Mathwes (Text appears here)
    123               01                  06                       EN        Blank (No text here)
    so when i pull the data to BI i need to see only one record with Customer and text only (no Sales org and distr. Channel necessary) which has the Customer text value (5th record in above example)..
    I created Data source in SAP and pulling the data to BI in DSO with customer and customer text....it's sorting and getting the latest distribution channel record (6th record in above example0
    Can yo uplease tell me is there any way that i can get the record which has customer text in it..(any possibilities of writing abap routine in info package) or any data source enhancement with abap code...
    can you pelase tell me the abap code that needs to be performed to solve the issue...
    Thanks in advance
    sailendra

    Sort the RESULT_PACKAGE by customer and customer text in the endroutine of your transformation.
    After the sort, the record with text for customer will be the last record and it will overwrite the other records in the DSO which has blank values.
    Just add the below sort statement in your end routine.
    SORT RESULT_PACKAGE[] BY CUSTOMER CUSTOMER_TEXT.
    As per the sample records mentioned in your post, after the sort, 5th record will become the last record and this will overwrite the other records which has blank value in the DSO.
    --- Thanks...

  • No transfer rules for FI master data sources

    Hi all
    I didnt get transfer rules for some of the FI master datasources.
    0GLACCEXT_T011_HIER
    0NEG_POSTNG_TEXT
    0ITEMSELFLG_TEXT
    When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
    *Infosource(transaction data) is not known.
    How to resolve this isssue.
    Thanks.

    Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if  any and install the same.
    Not all the fields will be mapped with BI info objects.  Only necessary ones as defined in BI content will be available for you.
    If you feel the mapping is incomplete you can modify the same according to the requirement.
    Hope this helps.
    Regards,
    Rangz

Maybe you are looking for