Master data load: texts are not loaded

Hi friends,
Trying to load BW Hierarchy(0COSTCENTER) to BPC dimension(P_CC).
Loadedd master data & text data using package "Import master data from BI infoobject"(/CPMB/IMPORT_IOBJ_MASTER), but EVdescription (texts) are not uploaded ino BPC dimension (P_CC).
Because of above error, when i try to load hierarchy(0costcenter), sytem throwoing one more error(JScrpit evaluation error).
Now i want to load texts into P_CC. ours is bpc 75nw sp10.
Found 2 notes, but these are related to older support packges
1462732 u2013 DM: text node descriptions canu2019t be imported.
1531601 - Incident 737084 / 2010 / text nodes aren't loaded
Transformation file:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=-1
ROUNDAMOUNT=
*MAPPING
ID=ID
CURRENCY=0OBJ_CURR
*CONVERSION
DM package run:
Infoobject: 0COSTCENTER
set selection: Attributes Controlling area = SP00
                       Hierarhcy: import text node(yes), selected hierarchy, version(empty),memberid(SP001170),level(not filled)
                       language: English, medium description,
                      attiribute list: currency(0OBJ_CURRENCY),controlling area
fileter by attributes or hierarhies option selection,
Mode: Update
Format: internal
Dimension: P_cc
package ended with error
Failed to write text of master data; check the error message
checked BPC dim, only member ID & currency is updated, but not evdescription.
Can you please share valuable inputs.
thanks,
naresh

resolved problem.
Packages given bpc7.5 nw sp10 are is exactly working.
Mapping section:
ID=0CO_AREA+ID
CURRENCY=0OBJ_CURRENCY
becoz base members are automatically added with controlling area in BW hierarchy on 0costcenter.
Followed method given in how to guide.

Similar Messages

Master data(0vtype) values are not showing in reports.

Hi Gurus,
I have an info object '0VALTYPE' with 'TEXT'. I already loaded the data in
for this object. but in reporting level i am getting the values # and 20(actual)
even though it has so many vales(ex: 10(plan)etc). but all the values are not populating in the query.how to get all the values in reporting level.
Thanks in advance.
Thanks
Raju.k

Hi Raju,
You have already confirmed, but still please go to infoobject 0VTYPE again and check the master data to see all values exits there.
If yes and still in reporting you can not see those, try doing the following:
1) Right click on 0VTYPE and click on "Activate Master Data", and/or
2) Go to Menu --> select Attribute change run --> select 0VTYE and execute the changes.
Regards
Pankaj

Error in BPC 10 NW Master data attributes/text and hierarchy loading

Hi Experts
I have this Error
*MAPPING
NODENAME=*IF(NODENAME(1:3)=*STR(I00) then NODENAME; NODENAME(4:7))
HIER_NAME=HIER_NAME
PARENT=PARENT
ORDER=ORDER
*CONVERSION
ID=CF_NODENAME.XLS
ID=CF_PARENT.XLS
ID=CF_HIER_NAME.XLS
Regards

Hellow Bishwajit
In SAP BPC, we have created two hierarchy, I001 and I002, but in the moment of created the hierarchy in BPC, i have error, the I002 and I001 hierarchy does not exist in BPC.
I do not know what to do.
Regards

Master data medium texts not loaded in table

Hi,
I have this Info Object which had only short texts enabled earlier.
I changed this to enable the medium texts and I am loading the medium texts via a flat file.
This worked fine in the development system and the medium texts were populated in the text table.
However once I moved this object to quality; the medium texts are not getting loaded
I debugged the transfer and update rules and I see that in the Development system, the generated program fills both the short and medium texts. However in Quality, the generated program only fills the short texts and no code exists for medium texts.
Can you please let me know how to resolve this issue?
Thanks,
Sita.

Hi,
As our experts said may be ur loading data from othe source also for that object
If it is sure that u are loading data from flat file , u know that that object where it is used , either it is a standard object or custom object(Z object)
if it is standard object then it will be used in different places at that time deleting the data also it is to difficult.
u try once again first select the medium text check box and do the activation of that master data object and move the same to quality and check that medium text check box selection option is appering or not then it is appering
then move the data sorce and Transformation and DTP and load the data and try to see the data.
Thansk & Regards,
Sathish

Loading GL Master Data -- Attributes, Text, Hier ; and Transaction Data

Hi all,
Could any one give me the steps individually to load the following type of data in BI 7.0:
1. Master Data with Attributes
2. Master Data with Text
3. Master Data with Hierarchy
4. Transaction Data
Do I have to create the Transformation and DTP's individually to load all the above kind of Data?
Please give me the information as much as you can.
Thanks,

For master data when you create tranformation it will prompt infoobject to act as infoprovider, and then you create DTP to schedule data to it. It works fine with attribute and Texts, though hierarchy dosn;t support much features of 2004s at my side. Like i am not able to migrate Hierarchy datasource to 2004s, and even when i replicate it, it comes as 3.5 datasource only.
For transaction data follow Gokuls step, or try to find on forums you will get lot of discussion on it.

System.Data.SqlServerCe.SqlCeException (0x80004005): Native components of SQL Server Compact engine are not loaded. Please reinstall Microsoft SQL Server Compact.

Hi
I have followed http://technet.microsoft.com/en-us/library/ms173298(v=sql.110).aspx to support private deployment for my application in anycpu mode.
Though its working fine on several XP and Windows 7 , on on particular XP machine , I get this
System.Data.SqlServerCe.SqlCeException (0x80004005): Native components of SQL Server Compact engine are not loaded. Please reinstall Microsoft SQL Server Compact.
   at System.Data.SqlServerCe.NativeMethods.ThrowIfNativeLibraryNotLoaded()
   at System.Data.SqlServerCe.SqlCeEngine.Dispose(Boolean disposing)
   at System.Data.SqlServerCe.SqlCeEngine.Finalize()
Can anybody give me directions on this?

Do you use LINQ to SQL or EF or ADO.NET, is what
Yes, I would start by investigating:
- Do you REALLY need "any CPU", or can you cope with just x86 to make things simpler (See my LINQ to SQL blog post)
- Is SQL Server Compact installed on this PC, and which build (is it same or different from the one you distribute)
- Use Process Explorer from sysinternals on the machine to find out where the app tries to load the native libraries from (and fails)
Please mark as answer, if this was it. Visit my SQL Server Compact blog http://erikej.blogspot.com

BPC 7.5: Node ID and description are not loading

Hi,
I'm working on BPC 7.5 and SP04.
I'm working on BPC 7.5 and SP04.
I have G/L account hierarchy in BI system. I tried to load G/L account master data attr/text into BPC and successfully loaded but hierarchy node ID's and description are missed. I followed the below steps.
1) Loaded master attr,text and hierarchy data from ECC to BI and activated the master data.
2) Used the below transformation and conversion file.
3) Selected the hierarchy in selecetion in data package while loading data into BPC.
Transformation File:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF = 177000
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=*MAPPING
*MAPPING
ID=ID
*CONVERSION
ID=ACCT_ID_MD.xls
G/L Account compounded to chart of accounts (10+4) and has total length 14 and hierarchy node ID's have length 32.
I used the below conversion file.
External                                                         Internal
01000000??????                               ??????
0100000???????                               ???????
010000????????                               ????????
0000000000000000000000000000????         ????
000000000000000000000000000?????         ?????
00000000000000000000000000??????         ??????
0000000000000000000000000???????         ???????
*                                                      js:%external%;
Please suggest anyone how can I load node ID's and description.
Note: I followed the same above process for 0PROFIT_CTR and 0COSTCETER and successfully loaded master, text and hierarchy data.
Thanks
Prasad

Hi,
Use the below code in CMOD and change the hierarchy name.
*& Include           ZXRSAU04
CASE i_datasource.
Global Declaration *********
FIELD-SYMBOLS: <FOLDERT> TYPE ROSFOLDERT,
               <HIENODE> TYPE ROSHIENODE.
CONSTANTS : C_NODE VALUE 'C'.
**Enhancement will be used to suffix Z to all cost center hierarchy node
**This will be further used in BPC to load hierarchy without error.
WHEN '0COSTCENTER_0101_HIER'.
LOOP At C_T_HIENODE3 ASSIGNING <HIENODE>.
   IF <HIENODE>-IOBJNM = '0HIER_NODE'.
   CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
   ENDIF.
ENDLOOP.
LOOP At C_T_FOLDERT ASSIGNING <FOLDERT>.
IF <FOLDERT>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <FOLDERT>-NODENAME+4(20) into <FOLDERT>-NODENAME.
ENDIF.
ENDLOOP.
LOOP At C_T_HIENODE ASSIGNING <HIENODE>.
IF <HIENODE>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
ENDIF.
ENDLOOP.
********End Of Code
**Enhancement will be used to suffix Z to all profit center hierarchy node
**This will be further used in BPC to load hierarchy without error.
WHEN '0PROFIT_CTR_0106_HIER'.
LOOP At C_T_HIENODE3 ASSIGNING <HIENODE>.
   IF <HIENODE>-IOBJNM = '0HIER_NODE'.
   CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
   ENDIF.
ENDLOOP.
LOOP At C_T_FOLDERT ASSIGNING <FOLDERT>.
IF <FOLDERT>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <FOLDERT>-NODENAME+4(20) into <FOLDERT>-NODENAME.
ENDIF.
ENDLOOP.
LOOP At C_T_HIENODE ASSIGNING <HIENODE>.
IF <HIENODE>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
ENDIF.
ENDLOOP.
********End Of Code
ENDCASE.
Thanks
Prasad

QM action not allowed for DTP requests in master data and Text tables

Hi,
I have a master data object load request which has failed, returned error in st22 and job finished.
BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
How can I force QM status to red so that I can move on?
Running NW2004s BI (7.0) Patch 15.
I searched for this question but there is no answer
Thank you

Folks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Facebook images, profile photos, cover photos are not loading. Only small blue square with question mark. Same thing in Safari, FireFox, Chrome.

Since July on MacBook Pro facebook images, profile photos, cover photos are not loading. Only small blue square with question mark. Same thing in Safari, FireFox, Chrome. Everything is up to date including last version of Adobe Flash. And watching YouTube also a problem. Video is skipping, freezing for few seconds and jumps forward. At the same time on Toshiba with Windows Vista under the same account, same wi-fi connection everything works fine.
Please help with sugesstions to fix the issue.

Seems like problem is solved but it might be temporarily. Anyway. Click on the image, it will open facebook photo browser. Image is not loading so right click on the blue box with question mark, save image as. It will start downloading but without any success since browser do not see the image. After this attempt refresh the page and close all tabs with facebook. Try to open facebook once again. For some reason after this weird actions all images displayed properly. Do not know for how long but now it works.

Certain sites are not loading.If user clicks on the links,the page loads as blank.Rest of the sites are working fine.

I had opened a couple of sites along with marathimoviesdownload.blogspot.com.For the last site, I received a error message about the security settings.I clicked on the "Get me out of here" link. After that websites that I had open in the initial tabs.. along with marathimoviesdownload.blogspot.com are not loading.
If you click on the links for the website like uploaded.net etc,the page opens but the contents do not load.
This is happening for IE as well as Firefox.
I have tried by uninstalling Firefox,deleting the previous install data.Re-installed the latest Firefox version.
Next I tried with your online support topics similar to mine. None of them have worked.
Thanks,
MaddyJ.

Unless you are using a proxy, the same web address should work
regardless. Disable it for now and check.

Skin for iphone, pictures are not loaded

Dear community,
i'm testing an iphone skin for a simple mobile browser application in a desktop browser. The pictures are not loaded and I cannot find the reason:
JDeveloper 11.1.1.5.0
Tree in Web Content:
=============
images/backButton.png
images/toolButton.png
skins/iphone.css
page.jsp
trinidad-config.xml
============
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>iPhonewebkit</skin-family>
</trinidad-config>
trinidad-skins.xml
===========
<?xml version="1.0" encoding="ISO-8859-1"?>
<skins xmlns="http://myfaces.apache.org/trinidad/skin">
<skin>
<id>iphone</id>
<family>iPhonewebkit</family>
<render-kit-id>org.apache.myfaces.trinidad.desktop</render-kit-id>
<style-sheet-name> skins/iphone.css </style-sheet-name>
</skin>
</skins>
iphone.css
======
.button {
position: absolute !important;
overflow: hidden !important;
top: 8px !important;
right: 6px !important;
margin: 0 !important;
border-width: 0 5px !important;
padding: 0 3px !important;
width: auto !important;
height: 30px !important;
line-height: 30px !important;
font-family: inherit !important;
font-size: 12px !important;
font-weight: bold !important;
color: #FFFFFF !important;
text-shadow: rgba(0, 0, 0, 0.6) 0px -1px 0 !important;
text-overflow: ellipsis !important;
text-decoration: none !important;
white-space: nowrap !important;
background: none !important;
-webkit-border-image: url(/images/toolButton.png) 0 5 0 5 !important;
.backButton {
position: absolute !important;
overflow: hidden !important;
top: 8px !important;
left: 6px !important;
margin: 0 !important;
height: 30px !important;
width: auto !important;
line-height: 30px !important;
font-family: inherit !important;
font-size: 12px !important;
font-weight: bold !important;
color: #FFFFFF !important;
text-shadow: rgba(0, 0, 0, 0.6) 0px -1px 0 !important;
text-overflow: ellipsis !important;
text-decoration: none !important;
white-space: nowrap !important;
background: none !important;
-webkit-border-image: url(/images/toolButton.png) 0 5 0 5 !important;
padding: 0 !important;
border-width: 0 8px 0 14px !important;
-webkit-border-image: url(/images/backButton.png) 0 8 0 14 !important;
I have tried also relative URLs by moving images directory into skins directory, but without success. What am I doing wrong?
Thanks for support,
DF
Edited by: 907283 on 11.01.2012 01:31
Edited tree

Sorry, I forgot to paste it:
<tr:messages/><h:form>
<tr:panelHeader text="Display Items" styleClass="toolbar">
<tr:commandButton text="Back" action="start"
styleClass="backButton"/>
<tr:commandButton text="Show Details" action="detail"
styleClass="button"/>
</tr:panelHeader>
toolbar definition in css:
.toolbar {
box-sizing: border-box !important;
-webkit-box-sizing: border-box !important;
-moz-box-sizing: border-box !important;
border-bottom: 1px solid #2d3642 !important;
border-top: 1px solid #000000 !important;
padding: 10px !important;
height: 45px !important;
background: url(/images/toolbar.png) #6d84a2 repeat-x !important;
display: block !important;
.toolbar > h1 {
position: absolute !important;
overflow: hidden !important;
left: 50% !important;
margin: 1px 0 0 -75px !important;
height: 45px !important;
font-size: 20px !important;
width: 150px !important;
font-weight: bold !important;
text-shadow: rgba(0, 0, 0, 0.4) 0px -1px 0 !important;
text-align: center !important;
text-overflow: ellipsis !important;
white-space: nowrap !important;
color: #FFFFFF !important;
border-bottom: none !important;
Thanks!

Keyfigure with units are not loading into transactional DSO in APD

Hi,
I am loading data from a Query to transactional DSO through APD. I have formula and new selection keyfigures in my query.
I mapped these keyfigures with units to the DSO. But i didnot see data for these keyfigures and also the units are not loaded.
I can see the values and units displayed in my query ?
What may be the reason for this issue even though every mapping is correct?
Please help me on this issue.

Hello Dear
When you are getting blank date , your update rule processes its value as 00000000,
Now in the date conversion routine if you go , you will find that after the routine one exception is written for this value..means this value is not accepted.
So maintain a date and load data.
Award points if it solves your problem/concern
Thanks
Tripple k

Master data load: texts are not loaded

Similar Messages

Maybe you are looking for