Master Data not being uploaded to Info Object

Hi all,
I'm trying to upload some master data  in to an Info Object with attributes. When I trigger the DTP, the status gets stuck to Yellow and the data is not being uploaded. There are no errors being shown.
The data has reached PSA perfectly. My data source is a flat file.
Anyone have any ideas?
Please help
Thanks

Hi,
There could be various reasons for this. I would have gone through checking it this way.
Activity set 1:
1) Check in SM50 if there is any activity happening.
2) Check in SM37 for any cancelled jobs.
3) Check in SM21 for error logs.
Activity set 2:
1) Cancel the current request.
2) Ensure my transformation (b/w datasource and InfoObject) is active.
3) Try to reduce the data package size and try (say to 100)
4) Run the DTP
Activity set 3:
1)  If Activity set 1 and 2 do not help me, I would check by deleting the request in my PSA as well. Take only one record of the flat file which I am sure has no illegal characters and try loading.
2) If successful, this would mean it could be because of the erroneous record in the complete set (It may be taking some time to show up the error and hence the status is still yellow).
3) If unsuccessful, this could be because of some objects which are inactive. And I would start from deleting and recreating the DTP.
Also, do you have any routines in the transformation? If so please recheck the logic.
Hope it helps!!

Similar Messages

  • Error in master data load in time dependent info object

    hi,
    while loading master data(Texts) to time dependent info object i am getting error like      <b>"INFODEP1 : Data record 8 ('00000512 ') : Invalid "to" date '1-2-2004 '</b>     
    can anyone help where exactly is the error and how to remove it.
    Thanks
    Ashish

    hi,
      the date format should be yyyymmdd.
    regards
    pls assign points if helpful.

  • Z1 Data not being uploaded to Aggregates operation report(AOR)

    Hi,
    Iam facing one issue.The downtime entered into the Z1 Notification should upload into the AOR (Aggregate Operations Report).  The downtimes entered in Z1’s for the secondary plant have been transferred to the AOR downtime section, but the downtime entered in  Z1's for the Upper plant, have not transferred to the Aggregates operation report downtine section.
      The report runs based in Multiporovider.
    Please help me out in this issue.
    Regards,
    Sindhu

    Hi,
    thanks for ur response. ihave checked transfer rules and update rules.Could u tel me how can i proceed further to find out why the downtime is not transferred to the report.
    Regards,
    sindhu

  • Master data infopack assignment to Transactional Info source

    Hi all,
    I have been using Standard content cubes and ODS. What i observed was that, i see the master data infopacks under the transactional info source. Some infosources are feeding the Info objects, whereas some of them are feeding some Masterdata ODS. As i never came across such scenario, i was confused. Did any of you, came across such assignment for the infosources? Any insight on this issue would be helpful.
    Note: All the infosources used are out-of-box.
    Thanks in Advance,
    Mav.

    Hi Maverick,
    Are you referring to flexible update of master data as it's possible from BW 3.x to load master data into an ODS object.
    Check the link below ->
    http://help.sap.com/saphelp_bw31/helpdata/en/98/3a14836fe5e1499a4e17d2d45f4612/content.htm
    Hope it helps,
    Sree

  • Uploading Master Data using Flexible upload.

    Hi All,
    I am trying to post my current project scenario, in simple terms. Please guide me with inputs or pointers....
    I have two flat files
    File1, has - Emp Number, Emp Name, Emp Salary.
    FIle2, has - Emp Number, Emp SSN, Emp ph #, Short text, Medium text, Long Text.
    Now I need to upload these two flat files into an InfoObject(EmployeeNumber ). Such that Emp Number, Emp Name, Emp Salary, Emp SSN, Emp ph # - fields get into the EmployeeNumber InfoObject - Attributes table.
    And Short text, Medium text, Long Text gets into the Text table of the EmployeeNumber InfoObject.
    I think, this is an ideal scenario for flexible upload of master data. But I donno wat steps I need to follow to accomplish this. I would appreciate if someone can help me with a detailed solution or any pointers.
    Thanks
    -kiran
    ps : All useful replies will be awarded points.

    Hi Kiran,
    Welcome to SDN !!
    I believe you have already created the master data info-objects and assigned the attributes to the master data. Select short, medium and long text in the info-object definition.
    Next step would be to insert the master data (attributes and texts) as info-providers in the info-provider section of AWB. Go to the info-area -> right click -> insert characteristics as data target (select the info-object from the list) (you should switch on the text and master data in the definition itself).
    Next step, create two flat file info-sources for the two files. Create the update rules for the two info-sources and create the info-package to extract the master data.
    Hope it helps.
    Thanks
    Soumya

  • Email attachments from SSRS email subscription are not being uploaded to an email enabled SharePoint 2013 document library

    Email attachments from SSRS email subscription are not being uploaded to an email enabled SharePoint 2013 document library.
    I have tested the library using a standard email (with attachment) to the library and this works fine. 
    I have monitored the drop folder on the server and I can see both emails being picked up in drop and processed by SharePoint.  The email sent from a regular email account is uploaded with the attachment, whereas the email sent via SSRS subscription
    email is uploaded and the attachment (report) is missing.

    An update on this.  The email when sending from SSRS subscription is received in the library and the attachment is contained within the .EML file uploaded.
    The behaviour that I would like from SSRS subscription emails are to just have the document and not the email.
    Below is a snippet of the .EML files I quick copied from the Drop folder.
    Email attachment snippet sent from SSRS Subscrption:
    ----boundary_2477_75fa3d73-56de-4948-ad82-6588f3a35b95
    Content-Type: application/octet-stream; name="Toilet Usage by Month.docx"
    Content-Transfer-Encoding: base64
    Content-Dis;
     filename="=?utf-8?B?VG9pbGV0IFVzYWdlIGJ5IE1vbnRoLmRvY3g=?="
    Content-ID: <10722c0f-749e-4ecb-ac3f-206317bae734>
    UEsDBBQAAAAIAEVcbEY4Xh4a5nsAAPJtMQARABwAd29yZC9kb2N1bWVudC54bWwgohgA
    KKAUAAAAAAAAAAAAAAAAAAAAAAAAAAAA7N1rr1/XcSforyL4VRooR3vd9to76Kihjto9
    I8T2TDvAzFuaPrE1kUiCouxWPv38DyX50nHSniCdyS96bIAUL+d/LnxO7Vq11qr6j//p
    v3/x+Qe/fnr75WevX/3lD9qfHz/44OnVy9e/+OzVL//yB1+9+9sfXj/44Mt3L1794sXn
    r189/eUPvn768gcf/KeP/uNv/uIXr19+9cXTq3cfPF7h1Zd/8evHH/7q3bs3f/Hhh1++
    /NXTFy++/PPXb55ePf7wb1+//eLFu8cv3/7ywy9evP27r9788OXrL968ePfZzz/7/LN3
    X3/Yj+P8wbcv8/rxXt+++otvX+KHX3z28u3rL1//7bvnN/mL13/7t5+9fPr2p+/e4os/
    5f1+8yaffPshv3+Pj4/l3a++e5Ff/1Pv9tdffP7d3/vNmz/lvf3i7YvfPL6AX3z+zTv6
    Email attachment snippet sent from Outlook:
    --_004_A4C6DCEDE4346446A79AFF493D278530FB87FA07MELABCDEXA1airp_
    Content-Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document;
     name="Toilet Usage by Month.docx"
    Content-Description: Toilet Usage by Month.docx
    Content-Dis; filename="Toilet Usage by Month.docx";
     size=76574; creation-date="Thu, 12 Mar 2015 00:41:14 GMT";
     modification-date="Thu, 12 Mar 2015 00:41:14 GMT"
    Content-Transfer-Encoding: base64
    UEsDBBQAAAAIAMJcbEY4Xh4a5nsAAPJtMQARABwAd29yZC9kb2N1bWVudC54bWwgohgAKKAUAAAA
    AAAAAAAAAAAAAAAAAAAAAAAA7N1rr1/XcSforyL4VRooR3vd9to76Kihjto9I8T2TDvAzFuaPrE1
    kUiCouxWPv38DyX50nHSniCdyS96bIAUL+d/LnxO7Vq11qr6j//pv3/x+Qe/fnr75WevX/3lD9qf
    Hz/44OnVy9e/+OzVL//yB1+9+9sfXj/44Mt3L1794sXnr189/eUPvn768gcf/KeP/uNv/uIXr19+
    9cXTq3cfPF7h1Zd/8evHH/7q3bs3f/Hhh1++/NXTFy++/PPXb55ePf7wb1+//eLFu8cv3/7ywy9e
    vP27r9788OXrL968ePfZzz/7/LN3X3/Yj+P8wbcv8/rxXt+++otvX+KHX3z28u3rL1//7bvnN/mL

  • Problem in loading data from flat file to info object

    Hi experts,
      I am new on bw. I am trying to load data from .csv file to info object. CSV file contains two colums Mat No, Mat Name and are separated by comma and similarly Mat Name is attribute of Mat No in info object. I am doing all steps by following the book but whenever I load data into info object it is loaded in one column. I mean both Mat no and Mat name apears in Mat No column whereas Mat Name column appears empty in info object. I have changed exel file into .csv. Any one can help me sort it out.
    regards

    Hi,
    your flatfile should be in the form of csv ie it does not mean that in a word u seperate it with coma
    create an excel file and say save as in teh file name give the name of your flatfile and in the save as type select CSV(comma delimited) from the drop down list
    and then in this file enter the data as u fill in excel sheet.
    After closing the file right click it and say open with wordpad then the data should appear seperated with a comma.
    Try this and then revert back in case of any doubts.........
    Are u loading data into BI 7.0 or 3.x
    Regards
    Madhavi

  • All Master data not displaying

    Hi all;
    I am tring to create Hierarchy for some values for one master data object.
    Here is the issue:
    If I go to the RSD1 > 0costcenter > maintain master data > If I execute with maxm hits I get let's say 200 records for that master data But If I enter some value which is there in the master data instead of the execution it's not displaying anything.
    Same thing I am trying to create Hier for those cost centers but in the hier maintaince window when I enter that costcenter it does not display anything...and I check in Maintain Master data for 0costcenter those value are there when i execute all but don't see again if I give that particular value and execute.
    Any reason...
    Thanks.

    Hi simon;
    I checked that table and all the entries are version 'A' and I also saw there the ones that are not coming while creating hier are active as well. I also checked tcode RSATTR and there is nothing left for change run., this is production env,. and we do change run every night after the process chain.
    Thank you for you reply do you think anything else because those some master data not populating...on selection?

  • How to see where all the master data is being used

    Hi Gurus:
    How to see say master data XYZ is being used in ODS, IC...ETC
    Thanks & Regards

    hi MK K,
    to check the characteristic value is used by which infoproviders, you may try
    rsa1->infoobject->choose the characteristic->'master data maintenance', select the row for that characteristic value, and button 'delete' (trash icon) and 'save', you will get a message 'master data cannot be deleted'.
    transaction slg1, object RSDMD, subobject MD_DEL, and execute, in next screen double click the top node, you will see the log, message text in below panel, e.g 'master data xyz(SID xxxxx) is used in /.../...'
    xyz = characteristic value
    /.../... = table name, can be dimension table of infocube, e.g /bic/d[infocubename]x, then you know which data target used the value.
    hope this helps.

  • Data not received in InfoCube / PSA object / InfoObject

    Hi Experts,
    i written code against keyfigure to convert values in to same currency values and assigned constant USD for the reference characterstic.
    Now i tried reload the data but it throws error as 'Data not received in InfoCube / PSA object / InfoObject'
    i hope you all understand my problem. if so please advise.
    Thanks,
    RK
    Edited by: RK on May 21, 2009 6:48 PM

    Did you try looking into short dump about the problem ?
    try these links :
    Short Dump "Data not received in InfoCube / PSA object / InfoObject"
    Short Dump "Data not received in InfoCube / PSA object / InfoObject"

  • Wild Cards are not allowed for this info object

    Hello Experts,
    I am getting some problem, when I trying to find the some selections for info object in variable selection screen; it giving some error like u201CWILD CARDS" are not allowed  for this info object.
    I am trying to find the search item like this: TELENOR*
    When I click on find button it is giving error.
    Please any body help me in this matter.
    Thanks & Regards
    Prathap.

    Hi,
    You need to create a selections option variable on the characteristic that needs to be filtered.
    After doing this, when you run the query, select the * from the dropdown box,and give the value.
    Hope this helps u..!!
    -Pradnya

  • My contacts from my iphone 4S are not being uploaded and saved to iCloud.

    Why are the contacts that are on my 4S iphone NOT being uploaded and saved to iCloud contacts?  Yes, contacts toggle is turned to "on" on my phone.  Yes, I have updated manually while plugged in and connected to my WiFi as well as left it plugged in and locked to automatically update iCloud.  Still no contacts in my iCloud folder even though I have 379 contacts sitting on my phone.

    I'm no expert by far, but have had issues with this before.
    IMAP should allow your iPhone to remove messages from the server.
    But have you made sure both the iPhone and Outlook are connecting via IMAP?
    If your iPhone does remove the messages from the server, but your computer is using POP, then the computer may download the email before it is removed form the server by your iPhone.
    This was my issue, that my computer had already downloaded the message, and POP does not check later if it is deleted.
    If you delete a message from Outlook does it disappear on the iPhone?
    Alternativly you may need to check the email server settings.
    Who is your email provider?
    They may be able to check if IMAP allows you to remove emails.

  • I am playing a game called temple run on my phone.But my achievements are not being uploaded to my Game Center account.How can i solve this issue?

    I am playing a game called temple run on my phone.But my achievements are not being uploaded to my Game Center account.How can i solve this issue?

    contact the developer?

  • HT1349 I am loading pictures in the photo steam photo but they are not being uploaded to the cloud. I have enabled the pictures on the windows PC but how do I "force" the upload?

    I am loading pictures in the photo stream folder but theya er not being uploaded to the cloud. How do I "force" the upload from the PC to the cloud? I have followed the instructions and enabled the photo stream with the  correct folder on the PC...

    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database followed by Option #1 if necessary.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • HT5824 my pictures are not being uploaded to my icloud account?

    my pictures are not being uploaded from my iphone 3g to my icloud account? Why?

    contact the developer?

Maybe you are looking for

  • CAnt Shutdown or Reboot my Air

    hi folks, i recently got an (already used) macbook air and i have quite some trouble with the tiny one: -i cant shutdown the air like my other macs-the display remains black, the computer starts working, but if i close the display, the lid is lightin

  • Suddenly: "iTunes application could not be opened" - why?

    All of a sudden, I cannot open iTunes. I have tried reinstalling it (version 9.2.1, since I don't have the system reqs for iTunes 10), but to no avail. I repeatedly get the message "iTunes application could not be opened. An unknown error occurred (1

  • GUI_DOWNLOAD in Excel format

    Hi Gurus, I am using GUI_DOWNLOAD for excel (.XLS) format I Used *FILETYPE                        = 'ASC'   / DAT WRITE_FIELD_SEPARATOR           = 'X' My problem is the data not getting  proper excel format. thanking you. Subash

  • PDF Hyperlink not working-why?

    I use a variety of hyperlinks within my topics - internally within the topic, externally to remote topics, externally to other media such as Excel, Word, etc. My problem is with PDF's. My coworker can link no problem, and if I work on one of his topi

  • "Older Generation of Printer" Message

    I have just replaced the Black 61 XL cartridge in my Envy 4500 All-in-One.  I removed the old/spent cartridge, which had been working fine, and replaced it with a new identical purchased-at-the-same-time cartridge.  I now get a message that says, "Ca