Master Data Object Delta goes wrong ?

Hello Experts,
Delta for the Master Data Infobject went wrong and we are planning to initalize it. Which is a better idead, delete data from the Master Data Object Or initialze the delta without deleting the data from the Master Data Object.
Thanks,

Hi Sweatha,
If the InfoObject which you are planning to delete data is used in any of the queries, users will have problems if they are running those queries. And, you can not delete the InfoObject data completly if it was used in any InfoCubes. You have to completly delete the data in InfoCubes before you can delete all InfoObject data.
I would simply init again without deleting the data, then activate the InfoObject data. I do not see any problem in doing this.
Thanks
John
Thanks
Gova

Similar Messages

Delta enabled Master data object

We have a master data object which we would like to delta enable. On a weekly basis we would like to carry out a full load to this object. Will the full load have an impact on the delta process and if so how can I overcome? Thanks

Hi,
no, this won't have any impact on your delta; just ensure that both aren't fired simultaneously!
hope this helps..
Olivier.

How to know which master data objects need to activated in R3

SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT               Account assignment group for this customer
0ACCNT_GRP_TEXT                Customer account group
0BILBLK_DL_TEXT                Locked
0BILBLK_ITM_TEXT               Billing block for item
0BILL_BLOCK_TEXT               Billing block in SD document
0BILL_CAT_TEXT                 Billing Category
0BILL_RELEV_TEXT               Relevant for Billing
0BILL_RULE_TEXT                Billing rule
0BILL_TYPE_TEXT                Billing Type
0CONSUMER_ATTR                 Consumer
0CONSUMER_LKLS_HIER            Consumer
0CONSUMER_TEXT                 Consumer
0CUST_CLASS_TEXT               Customer Classification
0CUST_GROUP_TEXT               Customer Group
0CUST_GRP1_TEXT                Customer Group 1
0CUST_GRP2_TEXT                Customer Group 2
0CUST_GRP3_TEXT                Customer Group 3
0CUST_GRP4_TEXT                Customer Group 4
0CUST_GRP5_TEXT                Customer Group 5
0DEALTYPE_TEXT                 Sales Deal Type
0DEL_BLOCK_TEXT                Delivery block (document header)
0DEL_TYPE_TEXT                 Delivery Type
0DISTR_CHAN_TEXT               Distribution Channel
0DIVISION_TEXT                 Division
0DLV_BLOCK_TEXT                Schedule line blocked for delivery
0DOC_CATEG_TEXT                SD Document Category
0DOC_TYPE_TEXT                 Sales Document Type
0INCOTERMS_TEXT                Incoterms (Part 1)
0INDUSTRY_TEXT                 Industry keys
0IND_CODE_3_TEXT               Industry code 3
0IND_CODE_4_TEXT               Industry code 4
0IND_CODE_5_TEXT               Industry code 5
0IND_CODE_TEXT                 Industry code
0ITEM_CATEG_TEXT               Sales document item category
0ITM_TYPE_TEXT                 FS item type
0KHERK_TEXT                    Condition Origin
0MATL_GRP_1_TEXT               Material Group1
0MATL_GRP_2_TEXT               Material Group 2
0MATL_GRP_3_TEXT               Material Group 3
0MATL_GRP_4_TEXT               Material Group 4
0MATL_GRP_5_TEXT               Material Group 5
0MATL_TYPE_TEXT                Material Type
0MAT_STGRP_TEXT                Material statistics group
0NIELSEN_ID_TEXT               Nielsen ID
0ORD_REASON_TEXT               Order reason (reason for the business transaction)
0PICK_INDC_TEXT                Indicator for picking control
0PRODCAT_TEXT                  Product Catalog Number
0PROD_HIER_TEXT                Product Hierarchy
0PROMOTION_ATTR                Promotion
0PROMOTION_TEXT                Promotion
0PROMOTYPE_TEXT                Promotion Type
0PROV_GROUP_TEXT               Commission Group
0REASON_REJ_TEXT               Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT               Volume rebate group
0RECIPCNTRY_TEXT               Destination country
0ROUTE_TEXT                          Route
0SALESDEAL_ATTR                Sales deal
0SALESDEAL_TEXT                Sales deal
0SALESORG_ATTR                 Sales organization
0SALESORG_TEXT                 Sales Organization
0SALES_DIST_TEXT               Sales district
0SALES_GRP_TEXT                Sales Group
0SALES_OFF_TEXT                Sales Office
0SCHD_CATEG_TEXT               Schedule line category
0SHIP_POINT_TEXT               Shipping point/receiving point
In BW
Base Unit of Measure     0BASE_UOM
Bill-to party                    0BILLTOPRTY
Calendar Day                  0CALDAY
Calendar Year/Month      0CALMONTH
Calendar Year/Week      0CALWEEK
Change Run ID              0CHNGID
Company code              0COMP_CODE
Cost in statistics currency          0COST_VAL_S
Credit/debit posting (C/D)            0DEB_CRED
Distribution Channel       0DISTR_CHAN
Division                                     0DIVISION
Number of documents    0DOCUMENTS
Sales Document Category          0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items         0DOC_ITEMS
Fiscal year / period
Fiscal year variant                      0FISCVARNT
Gross weight in kilograms           0GR_WT_KG
Number of Employees    0HDCNT_LAST
Material                                     0MATERIAL
Net value in statistics currency    0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer                            0PAYER
Plant                             0PLANT
Quantity in base units of measure 0QUANT_B
Record type                   0RECORDTP
Request ID                    0REQUID
Sales Employee            0SALESEMPLY
Sales Organization         0SALESORG
Sales group                   0SALES_GRP
Sales Office                   0SALES_OFF
Shipping point                0SHIP_POINT
Ship-To Party                0SHIP_TO
Sold-to party                  0SOLD_TO
Statistics Currency                    0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
   Bhima.
Message was edited by: Bhima Chandra Sekhar Guntla

Hi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P

Is it possible to delete the keyfigures data in a master data object?......

Hi Folks,
can any one please tell me how can i delete a particular keyfigures data i na master data object.
just i loaded wrong data to the keyfigure.i want to delete the whole data for the keyfigure only.so any one please help me .its very urgent.
Thanks in advance.
ashok.

Hi Ashok,
   you cant delete   particular attribute (as keyfigure in ur case..) data for particular master data.. you need to delete entire master data once.. but before that you need to delete transactional data related that master data.. and then load once again with the correct data...
    but you can't delete particular attribute(key figure data)...
   otherwise.. you can load once again the correct data.. because.. if you load same data means master data will just ovverwrite the previous data so, you can try with this option also..
regards
@jay

Load Failure for Master Data object

Dear Sdns,
                    Am doing daily master data loading for VENODR_ATTR master data object.... Am loading it through DELTA Update.... I got an error in Status Tab.
rror message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
The Error Message is : - Update mode R is not supported by the extraction API.The application program for the extraction of the data was called using
update mode R . However, this is not supported by the InfoSource.
Kindly Help me if any of the Snd people might have face this kind of problem...
Answering Getz Appreciated,
Warm Regards,
Aluri

Hi Aluri,
The file might be used or being edited by some other person when you are doing the delta.
CHeck the source system connection @ AWB.activate it.
Follow these steps
1. Activate transfer rules for data source in source system.
2. Activate the ODS
3. Activate the update rules (ods to ods and also ods to cube)
5. Right-click at the ODS, choose 'Generate Export Data Source'
6. Replicate the data source
7.se38---->RS_TRANSTRU_ACTIVATE_ALL for source system .
Then start data loading again.
Hope this helps.
Assign points if useful.
Thanks & Regards,
Bindu

Unable to delete master data line items - Master data object CCHIUSRAM

Hello
We have an issue with the Master data Object CCHIUSRAM - CC Hier User Auth Maintenance. It has only master data and no texts no hierarchy. It is not time-dependent. It has /BIC/PCCHIUSRAM, /BIC/SCCHIUSRAM as database table only. This master data is not being used in any infoproviders.
In development client we are able to delete the line items of the Master data along with entering line items. RSRV check gives green for all checks.
In Test / Production client we are not able to delete the line items of the Master data. We are only able to enter master data lines and if we change any item then it creates another entry in the table.
Tried SE14 & RSDMD_DEL_MASTER_DATA - both does not help.
Did ST05 trace, could not find something concrete.
If any one has faced such an issue with any master data item then a response is much appreciated. It has become a bottleneck for us.
Many Thanks in advance
Pradip Parmar

Thanks for the response.
I can do this in EBD, but it is working fine in EBD. I cannot do this activity in EBP / EBT as the systems are closed and I cannot activate directly in EBT / EBP.
Besides, I have recently transported active versions of the object in EBT / EBP all again twice to see if it changes anything.
My guess is that, there is something stupid may be I am missing somewhere.
Any help is much appreciated.
Thanks

How to find the size of the master data objects in the BW system?

Hi,
We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
For example, we have many Texts, Hier & Attributes.
0COUNTRY_TEXT
0REGION_TEXT
0PERSON_ATTR
0MATERIAL_LPRH_HIER
Advance Thanks.
Edited by: BW USA on Feb 2, 2010 10:52 AM

Hi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal

Master Data Governance & Implementation of SAP Master Data Objects

I would like to get hold of a case study on Master Data Strategy Governance Framework and Implementation of governance processes for Master Data Objects acrosss all SAP Modules. Governance processes do not have to use SAP MDM for master data management.
If any one in SAP community has implemented Master data governance, I would like to benefit from their experience and hence the request

Hello,
Not sure what sampling approach is, but it certainly help build a business case if you can provide sample data and case studies.
You may refer the SAP Provided PDF and presentations, to build your Business Case.
[SAP MDG|http://www.sap.com/solutions/enterprise-information-management/master-data-management/master-data-governance/index.epx]
Regards,
Abhishek

List of Master Data Objects in ECC 6.0

Hi All,
Can anyone please provide me a list of Master Data Objects in ECC 6.0? *\[removed by moderator\]
Thanks,
Kaushik Koli.
Edited by: Kaushik Koli on Jul 1, 2008 1:20 PM
Edited by: Jan Stallkamp on Jul 1, 2008 4:32 PM

Hi Gareth,
Thanks for your reply.
I know it is not an easy task but I need to provide a list of master data objects in ECC 6.0.
Can you atleast tell me where to start from? Any manual way of finding it will also do?
Regards,
Kaushik Koli.

Transaction code to list the warehouse master data objects

Hello all,
Is there any transaction code that lists all the warehouse master data objects/ reports. If there is any transaction code or document related to it pl. post it.
Thanks,
maxx

Hi Greetings
Transaction : SAP1
Logistics Execution --> Warehouse Management --> Master Data
You can find Number if WM master data reports.
Gobinathan G

Master data object - Available for reporting related

Hi Colleagues,
I want to load some 'duplicates' to info Object X. Meaning I have all values same but differ in one attribute. (Key is same). I do not want to use compounding for few reasons. I have not explored on functinality masterdata for reporting (Flexible update, not sure i used correct word) Can you please extend help in understanding the following..
Questions 1:
I understand that I can make available for reporting the existing master data object.
2) Can I add some code to allow duplicates there?
3) Can still the infoobjet navigational attributes has the same functionality - meaning they can be reported from reports of this newly extended masterdata?
Thanks for your time.
Best Regards,
Hari

Hi Arun,
Thanks for your time..
Infoobject alread exists with out the attribute below at the monet. It is also available in the cubes for my reporting on cubes..I would like to add the following attribute for my phase 2 for my new reporting needs..
Data:
<u>Infoobject - Attribute,</u>
SKU1 - GRP1
SKU1 - GRP2
SKU2 - GRP2
The issue is with the 1st 2 records.. As I do not have the componding.. My Cube already have Infoobject with lots of data... I do not want to add attribute componding as it demands for the presence in the cubes also. So I have to double the current data base size.. Ahh I do not want this..
Coming to reporting on the cube
I would like to report on both the things.. Like..
Including attribute
SKU1 GRP1 abcd
SKU1 GRP2 abcd
SKU2 GRP3 xyz
excluding attribute
SKU1 abcd
SKU2 xyd
We do not have any keyfigures..none is related with time..
Hope I am clear..
Thanks for your time,
Regards,
Hari
Message was edited by: Hari Kiran

Missing some master data for delta load( its very urgent please)

Hi,
I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
Address Number/ Addr Ln 1 Txt/ City Dstrct Nm
9025750333/ #/ #
help me its very urgent

Hi Sumanth,
check the delta queue and the V3 job is it running correctly ,
Have a look at OSS note :728687
and also see the following thread
Deltas are not available in Delta que
Delta Queues are not cleared in R/3
No data in RSA7 for 2lis_03_bf : HELP
check the data may b it is in modifide status not active.
regards,
supriya

Loading from ODS to Master data Object

Hi Friends ,
Please let me know how to load from ODS to a master data object.
Thanks,
krishna

Hi Krishna,
If your master data is enabled as "Infoprovider" then you can use an export datasource on the ODS and load the data into your master data.
I am not sure if it will work if the master data info-object is not enabled as "Infoprovider".
The other mechanism would be to use an infospoke to download the ODS data into a flatfile. And then use the flatfile to upload the master data.
Hope this helps.
Bye
Dinesh

Loading to Master data object

A master data object is loaded on a daily basis from R3 (Full Load). In the past there have been loads to the same object via flat files.
A full load from R3 does not overwrite records which are not part of R3 but part of a flat file load, is that correct? Thanks

Just to add (even though it is answerd )
If you had the zero-fill property set in OMSL(?) for material no, these two would values have been treated as one (with zeroes filled on the left). Check table value for field TMCNV-FLAG0 (this should be set to 'X' to have the numeric values zero-filled automatically).
Caution : once this setting is done and materials loaded, it shall never be changed.

Loads to Master data object

If I have created selection packages to load to a master data object for example:
1. Load to 0MAT_PLANT
2. Five packages created filtered by plant range
If I kick off the first package do I need this load to finish before the second package can load into the object i.e. 0MAT_PLANT is locked by the first package or can I load packages in parallel to a master data object? If so how? Thanks

Thanks for that, have carried that out. I have observed the following would be grateful if someone could confirm
1. Have a package running 2+ million lines
2. Kick off a package with a few hundred thousand lines after the first package, will complete before first package
3. Get an error since the extract completes in R3. However cannot load to the object since it is locked by the first
4. Message below:
User BWR3REMOTE is preventing you from loading master data for
characteristic 0MAT_PLANT . The lock was set by the master data loading
process with the request number (DataPackage number)
REQU_46MIUD73IBHYLLD9KZCAX4P47(000226) on 20070729,171630(711753) .

Master Data Object Delta goes wrong ?

Similar Messages

Maybe you are looking for