Master data Reorganization Process for a single InfoObject

Hallo Experts,
mayby someone else had  this problem bevor us?
SAP-BWProducion: Master data Reorganization Process for a single InfoObject (selfmade), other InfoObjects worked fine.
SAP BW 7.0 SP20 or 21
This element has daily attributes and the Q-Table has actual 180Mio entries. We startet reorganisation with 250Mio. entries.
Because of the daily loading, we cancel the batchprocess in the evening and started it again in the morning. This was fine for about 5 days. We elliminate 80Mio entries.
Our destination would be 80Mio entries left.
Whenever we run this feature now  - in a process chain - no entries were deleted after 30 hours working, and there were no counting-stastics in SM50
     Sequentielles Lesen         
     Insert                       
     Update
     Delete
The five days before, we saw Mio's of entries in this statistics.
We have checked the Q-table and  there exist a number of records which have the same attribute values across several records and the date from - date to values of these records are in a row.
RSRV is fine and we checked note 1234411 Master data reorganization - Performance improvement.
There are no other notes helping us.
Please give us a solution-idea.
Thanks
Santra

Hi Santra,
Could you please provide the solution for this?
Thanks
Vinod

Similar Messages

  • Time dep master data reorganization / process seems to do nothing

    Hi,
    Info:
    I created a process chain just to reorganize time dep master data for 1 InfoObject (0UCINSTALLA). In this process variant I choose only to process time dep attributes - not text or time independent tables.
    The InfoObject is flagged for change run (have som entries in M version)
    The InfoObject with the properties:
    /BI0/QUCINSTALLA = 9 393 539 rec (4 162 in M version) (same goes for Y-table). Those tables have just a few (3-4) fields.
    The InfoObject 0UCINSTALLA exists in a few aggregates, but none of the time dep attributes does.
    The system have these components:
    SAP_ABA     700     0013
    SAP_BASIS     700     0013
    PI_BASIS     2005_1_700     0013
    ST-PI     2005_1_700     0005
    SAP_BW     700     0015
    BI_CONT     703     0005
    Running on Linux / Oracle 10.2.0.2.0
    Problem:
    The background job is started via process chain but checking the
    process it seems to do nothing. I ran it for 3 days over the weekend, it doesn't time out or give any ABAP dumps or entries in SM21.
    Checking the statement for the process in ST04 gives me:
    SELECT
    FROM
      "/BI0/QUCINSTALLA" T_00
    WHERE
      EXISTS ( SELECT T_100 . "UCINSTALLA" FROM "/BI0/QUCINSTALLA" T_100
      WHERE T_100 . "UCINSTALLA" = T_00 . "UCINSTALLA"
    GROUP BY
      T_100 . "UCINSTALLA" , T_100 . "OBJVERS" , T_100 . "CHANGED" ,
      T_100 . "IND_CODE" , T_100 . "UCBILL_CLA" , T_100 . "UCRATE_CAT" ,
      T_100 . "IND_NUMSYS" , T_100 . "IND_SEC"
    HAVING
      COUNT(*) >= :A0 )
    ORDER BY
      T_00 . "UCINSTALLA" , T_00 . "OBJVERS" , T_00 . "DATETO"
    The Explain gives me:
    SELECT STATEMENT ( Estimated Costs = 65 933 456 , Estimated #Rows = 0 )
           7 SORT ORDER BY
             ( Estim. Costs = 65 933 456 , Estim. #Rows = 4 )
             Estim. CPU-Costs = 101 899 203 438 143 Estim. IO-Costs = 56 497 939
               6 FILTER
                 Filter Predicates
                   1 TABLE ACCESS FULL /BI0/QUCINSTALLA
                     ( Estim. Costs = 20 562 , Estim. #Rows = 9 413 200 )
                     Estim. CPU-Costs = 3 825 943 517 Estim. IO-Costs = 20 208
                   5 FILTER
                     Filter Predicates
                       4 HASH GROUP BY
                         ( Estim. Costs = 7 , Estim. #Rows = 1 )
                         Estim. CPU-Costs = 10 845 274 Estim. IO-Costs = 6
                           3 TABLE ACCESS BY INDEX ROWID /BI0/QUCINSTALLA
                             ( Estim. Costs = 6 , Estim. #Rows = 4 )
                             Estim. CPU-Costs = 45 379 Estim. IO-Costs = 6
                               2 INDEX RANGE SCAN /BI0/QUCINSTALLA~0
                                 ( Estim. Costs = 3 , Estim. #Rows = 4 )
                                 Search Columns: 1
                                 Estim. CPU-Costs = 22 364 Estim. IO-Costs = 3
                                 Access Predicates
    Anybody have any idea what the problem could be - I have no idea how long a reorganization for the amount of records should take. But the process seems to do nothing.
    Thanks,
    Johan

    A little update:
    I could see that the background process (which seemed to do nothing) ran a oracle process and on the DB server instance this was no.1 in top cpu. So - something is happening. The DB only has 2 cpus. Is there any way to run this job with more then 1 process?

  • Master Data is missing for Specified Matierials at cube level  !!

    Hello Experts,
    Good Day..!!
    I have been facing an issue in my project,  Master Data is missing for a KF and values are not displayed  in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
    Intially, i checked from Cube End and found the issue is in Cube level only.
    For that in the data flow, i already checked whether the data has been loaded perfectly or not.
    Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
    Kindly advice how can i move further..
    Thanks,
    SN.

    Hi,
    Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
    Hope this helps...
    Rgs,
    Ravikanth.

  • Master data Lookup missing for sold to party

    Master data Lookup missing for sold to party?
    The look up flow is from E_BOM to E_BOM1
    regards

    Hi,
    Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
    Hope this helps...
    Rgs,
    Ravikanth.

  • How make master data object available for ACR

    Hi,
    I remember that there is a program to run so that we can make the master data object available for ACR.
    i am not getting the program name. Please advice.
    Thanks,
    Dev

    Hi........
    If a master data is schedule for some changes...ie  InfoObjects and hierarchies that are planned for structural change are selected by default.........If u go to RSA1 >>  Administrator Workbench >> Tools >> Hierarchy/Attribute Changes from the menu...........If u click on Infoobject List or Hierachy List.........u will find that those infoobjects r already selected.....
    If u want to run ACR for some infoobjects manually.............either u can do it in RSA1..........by only selecting those infoobjects for which u want to run the ACR..........or u can also use the prog : RSDDS_AGGREGATES_MAINTAIN.........
    If that Particular infoobject is not there in the Infoobject or Hierarchy List in RSA1..............that means no structurak changes r required...........no need to run ACR..........
    Regards,
    Debjani.........

  • Loading master data through process chain

    Hi Gurus
    I am designing the process chain , I know that I have to start by loading master data first for that I am planning to load attribute first and then to load text and then Hierarchy. Is that the right sequence?
    Also how can I make sure that once the master data is loaded , the transaction data loading start automatically?
    I am planning to put attribute chage run as last process in every master data loading . Is that correct?
    Also i would appreciate if you can tell me the very first step I should follow to start my design, I have already identified the master data and transaction data and their respective dependancies.what would be my next step?
    Thanks for your help in advance.
    Kris

    Hi Kris,
    Make two seperate Process Chains for Master Data and Transaction Data
    For Master Data:
    Your sequence is absolutly correct, Identify what all Master Data Objects and make a list of InfoPackages and Start creating Process Chain as
    Start --> Attribute --> Text --> Hier --> Attr Change Run
    For Transactional Data:
    Identify the Data Targets and the Sequence of loading, then create the Process Chain
    NOTE: Always Master Data should be loaded before Transaction Data
    After Creating different Chains for Master Data and Transaction Data, Make a one Super Chain called Meta Chain where you can put all these process chains,
    Meta Chain  --> Process Chain 1( Master Data Chain) --> Process Chain 2( Transaction Data)
    also check these threads for process chain creation
    Re: Process Chain : Master Data
    Re: process chains ?
    Hope this helps,
    Sudhakar.

  • No master data source mainatenance for object

    Dear SDN.
    I want to look for master data for object but it gives message.
    No master data source mainatenance for object.
    What is going on wrong.

    Hi,
    When you are prompted for the infoobject in master data read you shoud give the main characteristic name, not the attribute name(attribute which is there in the data target). It will map the attribute automatically.
    Regards,
    Amruth

  • How to delete Master data using Process Chain

    I need to delete data in respective data targets such as Infocubes, DSO’s & Master data Infoobjects. It was fine with Infocubes & DSOs  using respective process type. But the issue is with Master data Infoobjects.
    Is there any process type by using which I can delete data in Master data Infoobjects using process chain?

    Murali,
    Master data object process type is not there because in BW, master data is conformed or is shared by other infoproviders. Due to this dependency, master data loading is a bit more complex. You need to drop all the data from all the infproviders which are using the master data you want to delete.
    -Saket

  • Activation of Master Data In process

    Hello,
         I am creating a process chain for master data load. I want to know what is the procedure to activate master data in process chain .
    Regards
    Baljit Singh

    Hi Baljit
    After master data infopackages in the end of process chain, please keep a process of type Attribute Change Run. This will take care of it.
    In tcode RSPC-> Process chain-> Maintenance screen-> click on process types icon-> here select attribute change run under "Other BW Processes"-> drag & drop process "attribute change run".
    Hope it helps
    Regards
    Pradip

  • Problems when creating data transfer process for  0EC_CPLAN (Compensation )

    Hi experts,
    I have the infoobject 0EC_CPLAN (Compensation Plan) Active in my BW sistem.
    I tri to create data transfer process for text and atributtes for it, but when i do this i get a "Target 0EC_CPLAN (Type IOBJA) is not active" error message.
    When i double-click on the texts or attributes i recive an  "Administration function is not possible for this InfoObject" information message and i can not active or edit it.
    What could this be? I am breaking my brain.
    Thank you all!

    Debugging i have seen this:
    15         CALL FUNCTION 'RSD_IOBJ_GET'
    16           EXPORTING
    17             i_iobjnm         = l_iobjnm
    18             i_objvers        = rs_c_objvers-active
    19             i_bypass_buffer  = rs_c_false
    20           IMPORTING
    21             e_s_vcha         = l_s_vcha
    22           EXCEPTIONS
    23             iobj_not_found   = 1
    24             illegal_input    = 2
    25             bct_comp_invalid = 3
    26             OTHERS           = 4.
    27         IF sy-subrc <> 0 OR l_s_vcha-infoarea IS INITIAL.
    28           MESSAGE i025(rsawbn).
    l_s_vcha-infoarea is Initial.
    Dues this mean that the object has no-infoarea??? In infoprovider i is under "enterprise compensation management" Does it give you a clue?
    Thanks!

  • How to export a whole process for a single image.

    Good morning.
    I would like to know how I can export a whole process for a single image. Is it possible? With that I can print of the way that goes better.
    Thanks.

    Hi Raghavendra,
    Thanks for answering my query. I have created a transport request and exported the folder I need to take backup of. But when I tried testing import of the same request I am getting following error. Do you have any idea what is the cause of this error?
    com.sap.security.core.server.destinations.itsam.DestinationRuntimeException: com.sap.security.core.server.destinations.api.DestinationException: [_DestinationServiceAuthorization1005] Code-based destination service access denied to component sap.com/cafeugpuiadmin. Access to security-relevant internal destination properties (e.g. passwords, tickets, etc.) is restricted to few selected engine components and not generally available to any service or application.
    Kind Regards,
    Urvashi

  • Delete Master Data using Process Chain?

    Hi Friends,
    How do I delete Master Data using Process Chain?
    Thanks,
    Pradeep

    Hi Bhanu,
    I am not sure why we would want to delete MD. But that is the task given to me. I actually know it is not possible. But is there a way to delete MD using chains?
    Thanks,
    Pradeep

  • Master data hierarchy synchronization for BPC NW 7.5

    Hi all,
    Here is my situation,
    Trying to load master data and hierarchy for BW costcenter. Parent CostCenter hierarchy is 10001000.
    CostCenter members are concatenated with Controlling area 1000.
    I followed the master data and hierachy sycnhronization for 7.5 without any success.
    I want to load only CsstCenter members without concatenatinon e.g. instead of 1000F1200, I  want F1200.
    Note thaI cannot use SUPPRESSCHARACTER 1000 as it suppresses other unintended values like 1000F1000
    I need a method to truncate only first four characters
    Please helo,
    Kara.

    Vijay,
    I am looking for suggestions on transformation and conversion files.
    My current settings,
    Transformation file:
    NODENAME=IF(NODENAME(1:4)=STR(1000) then NODENAME(5:13);NODENAME)
    HIER_NAME=HIER_NAME
    PARENT=PARENT
    ORDER=ORDER
    Conversion file:
    External: 10001000
    Internal: PARENTH1
    I get error: "Hierarchy nodes include dimension members that do not exist"

  • Initial full load of Master data using process chain

    Hi All,
    Could you please help me regarding, initial master data load to characteristics with attributes and text. I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time. And one more doubt is, as per my knowledge we can't maintain more than one variant in an info package, is that right ? or we can ?
    Means Start Variant -> Info Package (0Customer_Text, 0Customer_Attr,0BILL_TYPE_TEXT, BILL_CAT_TEXT) -> DTP ( ", ", ", ") -> ACR.
    Your Help will be appreciated.
    Thanks & Regards
    Sunil

    Hi,
    "I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time."
    if there is no dependency between attributes then you add you can create process chains and trigger them at a time. No issues.
    we can't maintain more than one variant in an info package, is that right ? or we can ?
    With one info pack you can't load data to all 23 psa. because each data source have own psa. you need to sue 23 info packs.
    in general start variant--> info pack --> dtp (assuming as your bw 7.x)---> attribute change run.
    like that you need to create 23 chains 
    Or create one two big chains.
    one is for attribute and another for text.
    In attribute
    start varaint--> info pack(info bject 1)--DTP(infoobject 1))--> info pack(infoo bject 2)-->dtp(infoobject 2).
    Like that way you can create in series and parallel chains to load attributes data into info objects. at end you add change run for 6 info objects each. SAme you can do for text loads also.
    Thanks

  • How to delete master data via process chain

    Hi All,
    I have to delete master data before loading it again via a process chain.
    In the process chain I chose the process " complete deletion of the data target content" but here I did not find infoobject as the data target option to delete the data.
    Please suggest how to solve this.
    Thanks,
    Harini

    Hi Harini,
    P_CHABNM - It is for the reference characteristic.
    I think if you dont have a ref characteristic then give the info-object name.
    This is what I fetched fom help.
    Reference characteristic
    The reference characteristic has the technical properties of a characteristic such as data type and length, as well as the master data (attributes, texts and hierarchies). The characteristic itself also has buinesses semantics.  Several characteristics can refer to the same reference  characteristic. Such characteristics automatically have the same technical properties and master data.
    Example:
    The characteristics sender cost center and receiver cost center use the reference characteristiccost center and with it the same values and the same texts.
    Bye
    Dinesh

Maybe you are looking for