Master data reports-activation
Hi
Can some one tell where can i activate 0bpartner/0customer masterdata business content reports.
Thanks
Ajay
Ajay,
0BPARTNER can be found in Application Compone 0CA_BP-IO
Go to RSA5 in R/3 and business content tab in BW under RSA1.
Hope this helps...
Sridhar.
Similar Messages
-
Best Practice for Master Data Reporting
Dear SAP-Experts,
We face a challenge at the moment and we are still trying to find the right approach to it:
Business requirement is to analyze SAP Material-related Master Data with the BEx Analyzer (Master Data Reporting)
Questions they want to answer here are for example:
- How many active Materials/SKUs do we have?
- Which country/Sales Org has adopted certain Materials?
- How many Series do we have?
- How many SKUs below to a specific season
- How many SKUs are in a certain product lifecycle
- etc.
The challenge is, that the Master Data is stored in tables with different keys in the R/3.
The keys in these tables are on various levels (a selection below):
- Material
- Material / Sales Org / Distribution Channel
- Material / Grid Value
- Material / Grid Value / Sales Org / Distribution Channel
- Material / Grid Value / Sales Org / Distribution Channel / Season
- Material / Plant
- Material / Plant / Category
- Material / Sales Org / Category
etc.
So even though the information is available on different detail levels, the business requirement is to have one query/report that combines all the information. We are currently struggeling a bit on deciding, what would be the best approach for this requirement. Did anyone face such a requirement before - and what would be the best practice. We already tried to find any information online, but it seems Master data reporting is not very well documented. Thanks a lot for your valuable contribution to this discussion.
Best regards
LukasPass a reference to the parent into the modal popup. Then you
can reference anything in the parent scope.
I haven't done this i 2.0 yet so I can't give you code. I'll
post if I do.
Oh, also, you can reference the parent using parentDocument.
So in the popup you could do:
parentDocument.myPublicVariable = "whatever";
Tracy -
Hi,
I want to create a master data report which contains just charactristics no key figures.
For excample I want to show which client has which type of rate.
How can I do this?
Everytime I get an error message that I have to determine a key figure in the report.
THanks
JohannesThanks I understand that I have to use a workaround like this.
But can I display characterisitc values in the query like a key figure value?
Customer | Rate
Client 1 | AAA
Client 2 | BBB
Clinet 3 | AAA
Thanks
Johannes -
Withholding tax master data report changes in SAP FI
Hi All,
In our client according to new audit requirements improvements have to be done for the withholding tax report. According to the the requirements changes only functionality has to be added to the main selection screen of the withholding tax master data report.
Changes only functionality has to be added to the selection screen of the report, the report has to display changes made to the tax master data with in a range of period, this was achieved easily by making program changes. Only issue now is when we do it in development client its showing us properly but when we do it in production it is not working because when ever we do any configuration changes we do it in the development client and transport it to production client so the changes done to any configuration with respect to WHT are not recorded in the production environment as they are transported from development client.
So, we are unable to achieve this in production client, please help me out with this issue.
Tthanks in advancehi
i need field
withholding tax exemption no, exemption from date, todate, Exemption reason,
as a master data it is saved in vendor master data > withholding tax accounting
but i need where it is saved in transaction data.
thanks -
How can we find out when master data was activated
Hello Friends,
We are loading master data for one info object directly from R3 to Info Object without PSA.
1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
Thanks
Tonyhi,
1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
Ans- yes it give loading details only.
2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
ans -in SM37 chk any attribute change run is completed , else in RSA1 Tools -> apply attribute change and hierarchy -> you can see the finished and scheduled job.
also u can chk the master data table for any M version records is available.
Ramesh -
Master Data Reporting........data flow model
I will be working on Master Data reporting. I heard that this can be done by loading data from a Datasource into an InfoObject. I would like to see a data model for this scenario. Can anyone help me on this?
Hi:
If you want to be more specific.
Open the InfoObject in change mode.
Go to Tab - Master Data/Texts
Here, if you go down, you will see a box for "InfoArea". Open this box and pick an InfoArea.
THis will do2 things.
1) It will allow you to create reports in the InfoObject.
2) It will allow you to Update the Master Data using any InfoSOurce.
Ram C. -
Basic question on Master data reporting on ODS
Hello All,
Recently I had a requirement, where they need to see the master data report ( with its attributes and attributes of attributes (transitive attribute)). Hence I loaded the master data on a ODS, to turn on the Navigational attributes.........
For e.g.: Requirement:
Master data : 0EQUIPMENT
ATTRIBUTE: 0SHIP_TO
ATTRIBUTE of ATTRIBUTE: 0SHIP_TO_REGION
Question: The report is working fine...... but I have a doubt whether the report (built on the ODS with no Key figures) will populate the master data for which there is no Key figures are maintained in ECC???
Please let me know your ideas and views.......Hi........
I think it will be better if u use Infoobject to store master data......here also u can turn attributes to Navigational attribute....u can activate that infoobject as dataprovider and do the Reporting as you do it now for the ods object. .........The master data approach will additionally give you the possibility to add navigational attributes to fulfil more reporting requirements..........In RSA1.............Infoprovider >> Right click >> Insert that Infoobject as Infoprovider............
Regards,
Debjani....... -
Hi friends
what is Master data reporting. can anyone please explain elobarately.Hi
How to report on Master data like for Material master, If i want to have report on Material and the price of that material,Cost of the material. What are the steps we have to follow to get report. Can we get report directly from master data objects or we have to send the data to data targets like Infocubes,DSO. If we have hierarchies in master data, what is the procedure.
Thanks&Regards
Bramhananda Reddy -
Master data report on 0MATERIAL
Hi Guys,
I am trying to create a report which is purely based on material master data IO ( 0MATERIAL).
There are several navigation attributes for 0MATERIAL. In Report i am using the following.
'Material Category'
'Assortment Grade'
'Active Flag'
Material Category will be in 'Rows' section of the Query Designer.
'Assortment Grade' and 'Active Flag' will be in 'Columns' section of the Query Designer.
There are only 4 types of assortment grades in BI. Eg: 1 ,2 ,3 ,4
There are only 2 values for Active Flag IO , like 'Active' (A) or 'Inactive' (I). For ever Assortment Grade there will be either active material or inactive material status maintained in Active Flag.
So Report output should look like
++++++++++++Assort. Grade |--1|2|3|4--|
+++++++++++++Active Flag | Active | Inactive|| Active | Inactive|| Active | Inactive|| Active | Inactive|
CATEGORY1 +++++++++++++ 2 | 1
CATEGORY2 ++++++++++++ 3 | 2
Active or Inactive columns should show the count of the materials which falls in to those categories.
could any one please tell me how can i achive this.
Please note that i 've already marked this IO as info provider.
any ideas are welcomed here.
Thanks in advance,
POPSHi POPS,
Create a structure in the column.
Create a new selection in your column structure, In the new selection insert characteric Assortment grade.
In properties (calculate tab),calculate single value as 'COUNTER for all detailed values'.
Insert a new slection and in the selection choose characteristic Active flag and in calvulate tab , for field calculate single values as choose 'COUNTER for all detailed values '.
Now run the report and check.
Regards,
Sunmit. -
hi
i'm creating report on the infoobject but i'm not able to see the values however those values exists in bw as master data
i'm putting key part in rows and att in coloumns but didn't found any result is there any trick for getting master data display as for reporting
thx
rubaneHi siva
The m data is already active
but at report side i'm not able to see the data
can you pls let me know whta may be the cause
thx
rubane -
Master Data Reporting (DATA MODEL)
Hi,
I need to bring 15 to 20 more attributes of 0material/0matplant infoobject from R/3 to BW through 0matplant_attr/0material_attr extractors. Right now this extractors is brings 20 feilds and i dont know still how many i have to bring. So i need to take a decision wheather to enhance those feilds to the master data extractor or create a view on those tables and then generic data source out of it and load it to the infoobject.
Now the issue comes here, i need to do a reporting of those newly added attributes. What should be the best design, wheather to do a reporting on the infoobject or create a ODS on top of infoobject to do report. Daily we are loading these inforobjects as a full load and its around 2 million records.
Please help me out, Your input will be highly appriciated.
Thanks,
Lasya.hi,
1. creating a view and use it for creating the generic datasource and do the loads. y cant you go for delta instead of loading full loads daily?
2. make the material and matplant as infoproviders(insert char as data target) and report on them. this is because ods will have to do activation and reporting on ods is not advisable.
Ramesh -
Hi,
How can i see the report of customer master data..
Like for sale order it is va05...
So how for a customer master data?
AshisHi
there is no standard report for that...
go to SE16... enter table KNA1 -- for all customers please note this gives all customers in your client
KNB1 -- for company code wise list
KNVV -- for sales area wise list..
after entering the table press enter ... give the selection criteria.. and execute.. this will fetch you the list of customers
Muthu
Edited by: Muthupandiyan on Feb 21, 2008 12:31 PM -
Master data reporting in SAP BW
Hi everybody,
we are using BW for reporting on master data. The concerned objects are all customer developments. We are experiencing problems concerning design questions and the print layout of the queries:
Our consultant advised us to use info objects for the implementation of master data in BW and to build the info objects just as the datasources in the source system, meaning: 1 table in the source system = 1 info object in BW. What are your experiences on that?
Second issue is, we have several long text informations. With the limitation of infoobjects to max. 60 digits, we are forced to split the contents into several infoobjects.
How do you handle long text informations in BW? (We need a printable report.)
Thank you for your suggestions, kind regards, Kathrin!Hi Kathrin,
It's OK to build one datasource on one table in the source system and load it into one infoobject. The main thing here that if you need to link these IOs that you load appropriate attributes into IOs to be linked.
Not knowing details it's hard to tell if this approach is the best.
About 60 symbols limitations you can see these refs:
Re: 60 Character Limitation - Dirk Herzog please help
Re: Bypass 60 char limit
Re: how to load low-case letter into InfoObject Master data
Best regards,
Eugene -
Hi Experts,
As per my BW report requirment i need to extract
Position ID
Position Name
Position Status (Occ,Unocc,Obsolete) *
FTE
Staff ID
Staff Name
Staff FTE
Pay Scale Group
Pay Scale Level
Position Reports To
Organisational Unit
Date Selection
Start Date
Posts Reporting To Position
from HRP1011,HRP1001,HRP1000,PA0002 & PA0007 Tables
Taking all those fields from HRP1000,HRP1001.......etc these are all the tables of Organizational master data which is one of the HR structures where HR people will design the organizational structure of the define and in that organizational structure they define org unit (org id which is represented by object type O),
Position id (position which is represented by object type S,
staffing is when they do the reporting then who is subordinate of whom
if you see tcode ppome (r/3) you can see all these fields this belongs organizational master data. i hope i cleared your doubt
So my question is if i extract this data by developing a custom defined data source based on view to which object (Org,Position,Staff) i need to lood this data
I mean as attributes
ThanksHi,
Goto RSA5 or RSA6 in R/3 System PA .. PA-PA
0employee 0HR_PA_0
Person action 0HR_PA_1
Master data DS 0EMPLOYEE_ATTR
HRPOSITON DS 0HRPOSITION_ATTR
Hope this help... assign points..
raj
Message was edited by:
gangaraju mullapudi
Message was edited by:
gangaraju mullapudi -
Material Master Data Reporting with SAP BW?
Hello,
I have a question regarding the use of a SAP BW System. Do you guys think SAP BW is a appropriate System for modelling and analysing Queries for the Material master data of the R/3 System.
Focus:
Material master data
Bill of Material
Material Classification System
Iu2019m not sure if Infocubes are the right way to report such kind of requirement. I mean Infocubes always requires key figures and dates but the material master data are mainly characteristics. Can someone give me some advice?
Thanks & GreetingsHi,
I'd say yes. You can aalo use InfoObejct and DSO (like Tables) as well as InfoSets (Join ability).
Masteer Data and BoM shouldn't be a problem.
Material Classification System is always a bit tricky. Standard Class extractors are not able to extract multiple classifcations. There will be need of some Programming due to the poor standard solution.
I suppose some 10 - 15 days till it's finished an productive.
hth
cheers
Sven
Maybe you are looking for
-
SharePoint 2010 - Web Analytics - Failed Queries Report
Hi, I hope someone has an answer for this. For some time, I've had SharePoint 2010 Enterprise edition installed and configured on a 3-tier (3 app, 3 wfe, 3 sql) setup. While the Web Analytics reports have been running since day 1, the "Failed Queri
-
Unable to Uninstall, Install, nor Update iTunes
I'm seriously at my wits end with this, let me start by saying. Furthermore, it's rather disgraceful that virtually nobody helped me with this issue the last time I posted it. Regardless of such, back to the matter at hand. I have been trying for mon
-
Accessing oracle with web dynpro
Hey people! I want to access a simple sql query on an oracle database and write the output in web dynpro.. Do i have to make an ejb for that? an how do i do that? or is it an easier way?
-
I have been trying to ingest multiple P2 Clips in Prelude CS6. After importing the P2 footage from the camera (HPX 170) using P2CMS, I open Prelude and find the folder on the hard drive. When selecting the footage folder, I can only select on file a
-
Is it possible to lock the onscreen numeric keyboard on the iPad mini so that I do not have to go back to the regular keyboard every time I press the space button?