Master data reports not working

Hi Gurus,
I created report based on 0EMPLOYEE(MasterData). I have diffrenet users with authorisation to see this report. But I execute this report I got NO AUTHORISATION . I checked the user profile S_RS_IOBJ was missing , so I added the object with the following values in the object
Activity -
3
Infoobject: -
0EMPLOYEE
Info Object Catalog: -
Sub object of Info object -
DATA
But the problem still exists i am not able to access this report which is built on Oemployee.
User has S_RS_COMP , S_RS_COMP1 along with other auth objects.
Regrads
A.Vasister

Hi All,
I added 0employee in S_RS_COMP and it is working fine. I think we need to maintain * or the the technical name of the infoprovider in the INFOAREA ( S_RS_COMP ) to allow user to access data from that infoprovider.
Regards
A.Vasister

Similar Messages

  • Upgrade to BI7 - Master data report not working with attributes

    Hi
    We've recently upgraded to BI7. We've noticed that any queries where a characteristic is the info provider, reporting on the attributes as free characteristics is not possible. The only way to fix this is to make the characteristics navigational. Is there a fix for this, or do we have to make all the characteristics navigational? It used to work in 3.1

    Hi Expert,
    We are starting upgradation, Can you please prvide guide me how to do the upgradation.
    Thanks

  • Master data check not working when loading into and ODS object

    Hi guys,
    we are loading transactional data into an ODS from a flat file.
    In the infopackage, we have checked the option :                                                
    "Do not update data if no master data exists for a characteristic".
    This option seems to be unreliable :
    For some characteristics (it seems those loaded using transfer rules (routines)), incorrect data is still loaded into the ODS even if no entry exist in the associated infoobject master data table.
    Any help appreciated.
    Many thanks !
    Pierre-Yves

    Hi Dear,
       please delete all the incorrect master data from the master data characteristic first and then try to uploading the data again .It should work, because there migth be some master data created when data were loaded with out the check before.
    And please check whether all your characteristic info object are of master data , I mean that in the infoobject defination you have checked the master data check box on the info object. If you have only text then it might fail the master data check.
    hope this help.
    cheers,
    balaji
    Message was edited by: Balaji NS

  • Extraction through master data attribute not working

    Hi All,
    In my ODS, i have a field Sales Document Item, with attributes ship-to-party, sold-to-party, etc.
    Now, ship-to-party and sold-to-party are extracted using the update method master data attribute of Sales Document Item.
    For some of the Items, the ship-to-party and sold-to-party are getting extracted properly, but for others, they are returned as blank; even though these records are present in the master data for Sales Document Item.
    Kindly provide your inputs for this issue...

    Hi Apeksha,
                Check your transformations.for those "ship-to-party and sold-to-party "
    Thanks,
    Vijay.

  • Withholding tax master data report changes in SAP FI

    Hi All,
    In our client according to new audit requirements improvements have to be done for the withholding tax report. According to the the requirements changes only functionality has to be added to the main selection screen of the withholding tax master data report.
    Changes only functionality has to be added to the selection screen of the report, the report has to display changes made to the tax master data with in a range of period, this was achieved easily by making program changes. Only issue now is when we do it in development client its showing us properly but when we do it in production it is not working because when ever we do any configuration changes we do it in the development client and transport it to production client so the changes done to any configuration with respect to WHT are not recorded in the production environment as they are transported from development client.
    So, we are unable to achieve this in production client, please help me out with this issue.
    Tthanks in advance

    hi
    i need field
    withholding tax exemption no, exemption from date, todate, Exemption reason, 
    as a master data it is saved in vendor master data > withholding tax accounting
    but i need where it is saved in transaction data.
    thanks

  • Best Practice for Master Data Reporting

    Dear SAP-Experts,
    We face a challenge at the moment and we are still trying to find the right approach to it:
    Business requirement is to analyze SAP Material-related Master Data with the BEx Analyzer (Master Data Reporting)
    Questions they want to answer here are for example:
    - How many active Materials/SKUs do we have?
    - Which country/Sales Org has adopted certain Materials?
    - How many Series do we have?
    - How many SKUs below to a specific season
    - How many SKUs are in a certain product lifecycle
    - etc.
    The challenge is, that the Master Data is stored in tables with different keys in the R/3.
    The keys in these tables are on various levels (a selection below):
    - Material
    - Material / Sales Org / Distribution Channel
    - Material / Grid Value
    - Material / Grid Value / Sales Org / Distribution Channel
    - Material / Grid Value / Sales Org / Distribution Channel / Season
    - Material / Plant
    - Material / Plant / Category
    - Material / Sales Org / Category
    etc.
    So even though the information is available on different detail  levels, the business requirement is to have one query/report that combines all the information. We are currently struggeling a bit on deciding, what would be the best approach for this requirement. Did anyone face such a requirement before - and what would be the best practice. We already tried to find any information online, but it seems Master data reporting is not very well documented. Thanks a lot for your valuable contribution to this discussion.
    Best regards
    Lukas

    Pass a reference to the parent into the modal popup. Then you
    can reference anything in the parent scope.
    I haven't done this i 2.0 yet so I can't give you code. I'll
    post if I do.
    Oh, also, you can reference the parent using parentDocument.
    So in the popup you could do:
    parentDocument.myPublicVariable = "whatever";
    Tracy

  • IPS event monitor and reports not working

    Dear after upgrading my IPS from E3 to E4  the event monitor  and reports not working, can you please advice my to solve this issues

    Hi All,
    Filter settings below:
    The filter works partially as I don't get alerts on the IPS itself.
    Firewall LOG:
    4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
    IPS LOG (when enabled):
    evIdsAlert: eventId=1352793300955167909  vendor=Cisco  severity=low 
      originator:  
        hostId: SSM02 
        appName: sensorApp 
        appInstanceId: 1192 
      time: Feb 14, 2014 15:33:22 UTC  offset=0  timeZone=GMT00:00 
      signature:   description=IP Fragment Too Small  id=1206  version=S212  type=anomaly  created=20030801 
        subsigId: 0 
        sigDetails: Too many small IP fragments in datagram 
      interfaceGroup: vs0 
      vlan: 0 
      participants:  
        attacker:  
          addr: 172.x.x.x  locality=OUT 
          port: 39715 
        target:  
          addr: x.x.x.x  locality=OUT 
          port: 514 
          os:   idSource=unknown  type=unknown  relevance=relevant 
      alertDetails: InterfaceAttributes:  context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ; 
      riskRatingValue: 50  targetValueRating=medium  attackRelevanceRating=relevant 
      threatRatingValue: 50 
      interface: GigabitEthernet0/1  context=single_vf  physical=Unknown  backplane=GigabitEthernet0/1 
      protocol: udp 
    Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
    Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
    Regards
    Mariusz

  • Master Data Reporting........data flow model

    I will be working on Master Data reporting. I heard that this can be done by loading data from a Datasource into an InfoObject. I would like to see a data model for this scenario. Can anyone help me on this?

    Hi:
    If you want to be more specific.
    Open the InfoObject in change mode.
    Go to Tab - Master Data/Texts
    Here, if you go down, you will see a box for "InfoArea". Open this box and pick an InfoArea.
    THis will do2 things.
    1) It will allow you to create reports in the InfoObject.
    2) It will allow you to Update the Master Data using any InfoSOurce.
    Ram C.

  • Basic question on Master data reporting on ODS

    Hello All,
    Recently I had a requirement, where they need to see the master data report ( with its attributes and attributes of attributes (transitive attribute)). Hence I loaded the master data on a ODS, to turn on the Navigational attributes.........
    For e.g.:  Requirement:
    Master data :                       0EQUIPMENT
    ATTRIBUTE:                        0SHIP_TO
    ATTRIBUTE of ATTRIBUTE:  0SHIP_TO_REGION
    Question: The report is working fine...... but I have a doubt whether the report (built on the ODS with no Key figures) will populate the master data for which there is no Key figures are maintained in ECC???
    Please let me know your ideas and views.......

    Hi........
    I think it will be better if u use Infoobject to store master data......here also u can turn attributes to Navigational attribute....u can activate that  infoobject as dataprovider and do the Reporting as you do it now for the ods object. .........The master data approach will additionally give you the possibility to add navigational attributes to fulfil more reporting requirements..........In RSA1.............Infoprovider >> Right click >> Insert that Infoobject as Infoprovider............
    Regards,
    Debjani.......

  • Master Data Report

    Hi,
    I want to create a master data report which contains just charactristics no key figures.
    For excample I want to show which client has which type of rate.
    How can I do this?
    Everytime I get an error message that I have to determine a key figure in the report.
    THanks
    Johannes

    Thanks I understand that I have to use a workaround like this.
    But can I display characterisitc values in the query like a key figure value?
    Customer | Rate
    Client 1    | AAA
    Client 2    | BBB
    Clinet 3    | AAA
    Thanks
    Johannes

  • All master data values not shown in query selections

    Hi
    I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
    I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
    As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
    Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
    Then I deleted the contents of the InfoCube. It still shows the original 25 values.
    The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
    The problem is the same in LISTCUBE
    I hope some of you can help we with this.
    Thanks
    /Karsten

    Hi Hari
    1) Reactivated the master data, said it was already active.
    2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
    I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
    I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
    Thanks for all the input guys.
    /Karsten

  • Impact on transactional Loads if Master data is not loaded

    Scenario for your reference:
    The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21. 
    I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
    If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
    And how can i find out the impact and correct the transaction data if it does?
    Can any 1 help me with this?

    Hi,
    If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
    In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
    So, first load the master data and run the attrib change run process.
    After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
    If delta loads are there, you might need to performa  full repair.
    Regards,
    Rahul

  • DOCUMENT SETTING that ALLOW FUTURE POSTING DATE does not work in PL34

    Hi Expert,
    I am now using SAP B1 2005B (7.40.252) sp:00 pl:34 and realised that the ALLOW Future Posting Date was not working. 
    I still can remember while I was using pl:11 at B1 2005A, there is no such problem and wish to know when can the bug fix up? in which sp/pl?
    Wish to hear goods news ASAP .
    Thank you.
    Joan.

    Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
    Value Date code in the above abap
            IF PAR_VALD = 'X'.
              MOVE C2-VALDT TO HLP_VALDT.  "  VALUE DATE
             write hlp_valdt to umsatz-budat dd/mm/yy.
            ELSE.
              MOVE C8-BALDT TO HLP_BALDT.
              MOVE HLP_BALDT TO HLP_VALDT.
            write hlp_valdt to umsatz-budat dd/mm/yy.
            ENDIF.
               MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
               MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
               MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
    Regards
    Anurag
    Message was edited by: Anurag Bankley

  • Drill down report not working in 1og report

    hi all,
    Drill down report not working in 1og.
    in 6i it working good but 10g not working .
    plz help any one.
    thanks

    Hello,
    For detailled instructions about hyperlinks :
    Oracle® Reports Building Reports
    10g Release 2 (10.1.2)
    B13895-01
    3.6.10.1.8 Creating a hyperlink using the Property Inspector
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
    Regards

  • CDR report not working

    Hi,
    We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
    Kindly suggest troubleshooting steps.
    Can we have any SQL query to fetch the report from database?
    Thanks
    jitender

    Hi Raju,
    From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
    " No results match the report filters. Change the filter values and submit the query again."
    Thanks
    jitender

Maybe you are looking for