Master Data Required for 2LIS_02_HDR Data Source Installation

Hi All,
              We are trying to install  2LIS_02_HDR DataSource through BC for our purchasing implementation . Can you suggest what all the Master Data required for this Data Source.
Regards,
Aditya

Hi ,
Please see this link.
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
In the same page you can find all details.
Hope this helps.
Thanks
CK

Similar Messages

  • Master Data source for sales district or Region in CRM

    Dear All,
    Please let me know the Master Data source for sales district or Region in CRM.
    Thanks
    Regards,
    Sai

    Hi Tiest,
    Thanx for responding.
    U r right, our clint is upgrading from 4.6 to ECC.
    So as per the clients requirements, we are maintaining all the configs for Services in CRM.
    Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
    What I am looking os some standard upload program.
    LSMW recording does not work.
    This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
    IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
    But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
    Till now, I am only able to define just one field name and a field value.
    I want this to word for mutliple entries.
    Hope u get my point.
    Thanx

  • No master data source mainatenance for object

    Dear SDN.
    I want to look for master data for object but it gives message.
    No master data source mainatenance for object.
    What is going on wrong.

    Hi,
    When you are prompted for the infoobject in master data read you shoud give the main characteristic name, not the attribute name(attribute which is there in the data target). It will map the attribute automatically.
    Regards,
    Amruth

  • Which Master data Source is available for the field VBUK-GBSTK (Doc Status)

    Hi
    Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
    Please help me.
    Thanks
    Mannev.

    Hi
    Thanks for your reply.
    That is Transaction data source. I want master data source.
    Thanks,
    Mannev.

  • Which Master data Source (Attr) is available for the field VBUK-GBSTK

    Hi
    Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
    Please help me.
    Thanks
    Mannev.

    Hi Mannev.
    I don't think that you will find GBSTK in any master data source. It is however available in 2LIS_11_VASTH.
    Hope it helps.
    BR
    Stefan

  • How to trace master data source (table-field)?

    Hello All,
    Please help, its Urgent!!
    I have the following 4 characteristic requirement in BW from PM/PS module.
    Master data source (format: table-field)
    AFVV-FSAVD - early start date
    AFVV-FSEDD - early finish date
    AFVV-SSAVD - late start date
    AFVV-SSEDD - late finish date
    can anyone tell me the procedure, how to find them in R/3 n if there r any standard business content for the same?
    Thanks in advance,
    JP

    Go to RSA5 Tcode in R/3, under SAP R/3 Application component, you can get PO/PS Components, and under that you can get PO-IO/PS-IO Components, here you can check all the vaialble master data datasources.
    KJ!!!

  • How to find active master data source in the bw system

    Hi
    Can anyone guide me how to find the active master data source in the bw system

    Hi,
        You can use the table ROOSOURCE. The field ROOSTYPE specifies the type of datasource whether Transaction or attributes or text. You could write an abap program to filter the table and give you only master data datasources.
    Assign points if helpful
    Regards.

  • Hardware requirement for SAP E-Sourcing 5.0

    Hi,
    Can any one tell me please about hardware requirement for SAP E-Sourcing 5.0.
    Thanks
    Sanjay Rai

    Hi
    Frictionless SRM 2005 SP3 has been rename SAP E-Sourcing SAP E-Sourcing 4.2.00.
    For detailed SRM Installation, Upgrade, Heardware requirments, Please go through the details of the Release-Independent Related OSS Notes given below ->
    Note 1093204 - Object Migration (This Note contains a detailed ZIP file)
    Note 1122739 - SRM E-Sourcing 5.0 Patch B (5.0.00_B) Release Notes
    Note 1094095 - SRM 2005 SP1 Patch O (4.1.00_O) Release Notes
    Note 1094094 - SRM E-Sourcing 4.2 Patch L (4.2.00_L) Release Notes
    Note 1094092 - SRM E-Sourcing 4.2 SP4 (4.4.00) Release Notes
    Do let me know.
    Regards
    - Atul

  • No transfer rules for FI master data sources

    Hi all
    I didnt get transfer rules for some of the FI master datasources.
    0GLACCEXT_T011_HIER
    0NEG_POSTNG_TEXT
    0ITEMSELFLG_TEXT
    When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
    *Infosource(transaction data) is not known.
    How to resolve this isssue.
    Thanks.

    Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if  any and install the same.
    Not all the fields will be mapped with BI info objects.  Only necessary ones as defined in BI content will be available for you.
    If you feel the mapping is incomplete you can modify the same according to the requirement.
    Hope this helps.
    Regards,
    Rangz

  • Creating Transformation in 3.5 Version for a Master DATA Source

    Hi ,
    Currently i am working in 7 version.
    I have Created a new master data info object  Through  a Template from a standard  info object 0Ven_comp.
    This Standard Info object 0Ven_comp   already has a data source 0VEN_COMPC_ATTR , where it is getting values.
    Now i want to use the same data source for my new info object which is created as template based on the 0ven_comp.
    Can anyone please tell me how i can use the same data source  for my new info object and that too i need to create transformation in 3.5 version.

    Hi Guru,
    You cannot use the same datasource with two different versions.
    Either it should be 7.0 or 3.x version.
    You can create a copy of datasource and you can replicate it in BI system.
    Regards,
    Rajesh

  • How to maitain Deltas for generic master data source

    Hi Friends,
    I created a view using MARA and MARC table. This view fields maitained by attributes of ZWMAT_PLT Characteristic.
    Now i faced the problem with deltas.
    How i need to maitain delta for above view.
    please give me solution for above problem.
    Thanks & Regards,
    Guna.

    Hi,
    If you have timestamp field in the view it is better use the Timestamp for the generic delta. Else try to include a timestamp field in the view.
    Also check this forum.
    How to set the delta for existing generic data source
    Delta Updating a Master Data Infoobject
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Assign points if this is helpful
    Rgs,
    I.R.K

  • How to create master data source for Profit center group in source system

    Profit center group information is available in SAP(T-code:kch3). But, I want to have this information in BW too.
    Can anyone tell me how to create a datasource for Profit center group? And which SAP table is able to feed master data for this information?
    Many thanks
    rajatina.

    HI ,
    It looks lilke we need to use the FM like 'G_SET_LIST_SELECT' to get the Profit
    Here ais note from the forums to get profit center group from table
    From Table SETLEAF,  Field SETCLASS  =  '0106'. Field SUBCLASS with controlling area. Profit center in Field VALFROM.
    You will get Group name in Field SETNAME.
    Regards,
    Sathya

  • Language error while loading master data source for text

    Hi,
    We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
    "Error during multibyte alignment for language D (position 2)".
    Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
    Thanks
    VV

    Hey Vishal,
    If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
    Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
    Regards,
    Anjum.

  • Whats the difference (Generic Master Data Source vs Transaction Data Sce)

    Hi Gurus,
    I have been wondering on whats the difference when creating <b>GENERIC Data Sources:</b>
    1.) Transaction Data
    2.) Master Data
    Pls. dont give an answer like (<i>A Master Data Generic Data Source is used to populate Master Data Info Objects and Transaction data Sources are used to populate ODS and CUBES.</i>)
    This definition is <b>FALSE</b> since I can use a <b>"Master Data (Data Source)"</b> to populate my ODS.
    They only differ in Process Chain since the Action when loading data using <i>Generic Masterdata Data Source</i> is <b>Attribute Change Run</b>. Unlike when loading ODS using Transaction Data Source will use "<b>Activate ODS Data</b>".
    Hope Somebody will clarify this...
    --Jkyle

    Hi Jkyle,
    at the moment I think it is more or less a grouping information in BW and additionally a information for you, your users, ... what type of data is being loaded thru the datasource.
    With grouping I mean just a type of information used for the list that opens if you'll assign a datasource to a infosource.
    With type of data I mean some sort of classification of the data for a special application. I can imagine, that the same data can be used as transactional data as well as as master data depending on the application. A good example for this can be the header data. For some applications you have header (transactional) datasources providing a header counter and additonally you have the document number (basically the header information) with some attributes as master data.
    May be there is a difference in the function modules that are called to extract the data, I am not sure about this.
    Hope this help a bit.
    regards
    Siggi

  • Facing problem with standard master data source *0bp_def_address_attr *

    Hi All,
    I am using BW 3.5 version
    I am loading master data form 0bp_def_address_attr(stabdard data source)  as part of my daily activities.
    this loading is failing frequently throwing following error message
    30 duplicate record found. 1243 recordings used in table /BI0/PBPARTNER
    ID : RSDMD
    message number 199
    Is there any way I can avoid this failure?How can I handle duplicate records?
    Please help me!!
    Warm regards
    Nanduri Aditya

    Thanks for your answers and sorry for my late reply
    Hi Srinivas,
    I am using  3.5  there is no ' handle duplicate records' option in info pacakge.
    Hi Francisco,
    Thanks for your answers,
    2 OSS notes are relevant to my problem. Currently I am checking in Dev whether it will fix my problem or not.
    Thanks a lot it was avery helpful answer.
    Warm Regrads,
    Nanduri Aditya

Maybe you are looking for

  • How map a specific exception in my web.xml

    Hi all, i got a servlet that instantiates a JavaBean which has all the code to connect and get some data from my database, if some error ocurrs the JavaBean returns an string message which was an exception what i want is to get the error exception to

  • Youtube videos do not play, just a blank white screen, i have Shockwve flash 15 plugin and Shockwave for director

    I've been trying to fix this all evening, and i've come across a lot of discussions where Shockwave Flash is not flash player but when they put the link in it just goes back to the download which i went to, i am absoloutley clueless on how to fix thi

  • ISE 1.3 Internal CA

    Hi,      I am looking for some assistance on the new local CA. My client provisions and launches the Cisco Network Setup Assistant but once I hit start, the client fails. Tail logs off the ISE node produce the following.. 2015-01-09 16:00:00,155 WARN

  • Variable Type EXIT - Locking Transaction Data

    Dear all, I have to use a variable type Exit in the level to identify all cost centers for a planner and his corresponding boss (master data lookup). Now e.g. the planner has cost center 1 and 2 as possible single values. The boss has cost center 1,

  • How can we use IMPORT-EXPORT as structure and TABLES parameters?

    Hello Sir, I have used SAPRFC with single IMPORT and EXPORT parameter. Could anybody give me an example in I can use IMPORT/EXPORT as structure and TABLE parameter as input? of course from/to PHP. Regards, RH