Master data required for implementation

Hi all,
We are going for a university implementation. Could someone tell me what master data is required for implementation from client. Like student data, learning content data, grading system,
My next question is which third party tool is good for library management & class and exam scheduling.
Thanks
Ravi

Hi Vinod,
I need some information about the implementation of SLCM. I have found some standard documentation about the functions it offers, but they usually give an overview. I couldn't access any information on issues such as the technical prerequisites or how to implement it yet.
As no such project has been implemented in my country, I'll keep on doing research online. If you have any documents that would be useful to implement or at least to understand the implementation process of SLCM, they would be of utmost value for me.
Thanks in advance
Aslı

Similar Messages

  • Master Data Required for 2LIS_02_HDR Data Source Installation

    Hi All,
                  We are trying to install  2LIS_02_HDR DataSource through BC for our purchasing implementation . Can you suggest what all the Master Data required for this Data Source.
    Regards,
    Aditya

    Hi ,
    Please see this link.
    http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
    In the same page you can find all details.
    Hope this helps.
    Thanks
    CK

  • Insert new Master Data Record for an InfoObject using a Function Module

    Hi @ all,
    is there any Function Module for creating a new master data record for an InfoObject? Implementing a FM for inserting a master data record into a master data table is done quickly. I think there will be problems with inconsistency implementing a FM using a simple "Insert" Statement. Isn´t it?
    I know it is possible to maintain an InfoObject in RSA1 (Master data IO> right click>Maintain Master data>execute(F8)> ...) but I have another requirement for using a FM.
    Thanks!
    Regards,
    Johannes

    use this
    RSNDI_MD_ATTRIBUTES_UPDATE

  • What are the master data tables for 'Plant'?

    Hi friends,
    What are the master data tables for 'Plant' that contain below data?:
    PLANT
    NAME1
    NAME2
    LANGUAGE
    HOUSE_NUM_STREET
    PO_BOX
    POSTAL_CODE
    CITY
    COUNTRY_KEY
    REGION
    COUNTRY_CODE
    CITY_CODE
    TIME_ZONE
    TAX_JURISDICTION
    FACTORY_CALENDAR
    Thanks a lot!

    Hi,
    Plz try out following tables for your requirement.
    TOO1W
    ADRC
    J_1IMOCOMP
    T001W :  werks TYPE t001w-werks, "PLANT
            name1 TYPE t001w-name1, "PLANT DESCRIPTION
            adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
    ADRC:  addrnumber TYPE adrc-addrnumber,  "ADDRESS NUMBER
             str_suppl1 TYPE adrc-str_suppl1,  "STREET2
             str_suppl2  TYPE adrc-str_suppl2, "STREET3
             street TYPE adrc-street,          "STREET
             city1 TYPE adrc-city1,            "CITY
             post_code1 TYPE adrc-post_code1,  "CITY POSTAL CODE
             post_code2 TYPE adrc-post_code2,  "PO Box postal code
             tel_number TYPE adrc-tel_number,  "TELEPHONE NUMBER
             fax_number TYPE adrc-fax_number,  "FAX NUMBER
             str_suppl3 TYPE adrc-str_suppl3,  "STREET4
             location TYPE adrc-location,      "STREET5
             city2 TYPE adrc-city2,  
    For Tax Details :
    J_1IMOCOMP :   werks TYPE j_1imocomp-werks,
                              j_1icstno TYPE j_1imocomp-j_1icstno,
                              j_1ilstno TYPE j_1imocomp-j_1ilstno,
    Hope this will help.
    Regards,
    Archana

  • Track Master Data Changes for Multiple countries

    Hi experts,
    I am in a Global HR Implementation & Rollout Project. We are creating Outbound Interfaces for 3 countries to export pay, time and general data to the 3rd party systems in those local countries. (Payroll is outsourced there).
    As well as sending New Joiners data every month, we need to send Changers data also to all those 3rd partys every month before the Payroll runs.
    I know 2 solution for this :
    a). Using Change Documents - Tcode : SCDO ..etc
    b). Using the report RPUAUD00.
    c). Using RBDMIDOC.
    Query :
    1). Are these the only solutions ?
    2). Whats the best solution for doing this for a Global Rollout project ? I need to track master data change for different countries for different set of Infotypes and fields. I need to send those Changers data as well as the New Joiners data through the Outbound Interface to all the local countries.
    This year we are doing for 3 countires, next year for 9 more countries, etc. Whats the best solution keeping this in mind ?
    Restrictions :
    1). Our Client HRs dont want us to disturb the report RPUAUD00 as they use that regularlly and want the flexibility to configure the configs themselves.
    2). If I must need to create and activate Change Documents for ALL individual fields, is there an easy way of doing this ?
    3). I need to send this Changers data from SAP to Legacy system, so dont know if RBDMIDOC will be a good solution for this. Any comments ?
    Just want the best possible and feasible solution for this issue.
    I will be please to allot point to anyone who gives a good solution.
    Moreover will be Thankfull also !!
    Cheers.

    Please try with transaction code "PC00_M02_LINF0"
    Cheers
    Suresh.KK

  • HR ABAP : Track Master Data changes for multiple countries

    Hi experts,
    I am in a Global HR Implementation & Rollout Project. We are creating Outbound Interfaces for 3 countries to export pay, time and general data to the 3rd party systems in those local countries. (Payroll is outsourced there).
    As well as sending New Joiners data every month, we need to send Changers data also to all those 3rd partys every month before the Payroll runs.
    I know 2 solution for this :
    a). Using Change Documents - Tcode : SCDO ..etc
    b). Using the report RPUAUD00.
    c). Using RBDMIDOC.
    Query :
    1). Are these the only solutions ?
    2). Whats the best solution for doing this for a Global Rollout project ? I need to track master data change for different countries for different set of Infotypes and fields. I need to send those Changers data as well as the New Joiners data through the Outbound Interface to all the local countries.
    This year we are doing for 3 countires, next year for 9 more countries, etc. Whats the best solution keeping this in mind ?
    Restrictions :
    1). Our Client HRs dont want us to disturb the report RPUAUD00 as they use that regularlly and want the flexibility to configure the configs themselves.
    2). If I must need to create and activate Change Documents for ALL individual fields, is there an easy way of doing this ?
    3). I need to send this Changers data from SAP to Legacy system, so dont know if RBDMIDOC will be a good solution for this. Any comments ?
    Just want the best possible and feasible solution for this issue.
    I will be please to allot point to anyone who gives a good solution.
    Moreover will be Thankfull also !!
    Cheers.

    I have used PU12 for same purpose at a similar client. It will fulfill all your needs I guess, but the learning curve is big. Search for "Interface Toolbox" or "PU12". Basically your search will end-up in these two links:
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYSOME_INTERFACE.pdf
    HR Interface Toolbox - PU12

  • Test Data Required for Bapi's

    Hello All,
    I am a newbie to SAP. 
    I have been tasked with finding the test data for a few BAPi's but have been unable to do so on my own.
    I have tried using the respective transactions to find valid test data and have looked at all the imports, tables in the given bapi but have been unable to find the required data.
    I am working on ECC 6.0.
    I ask all the learned folk out here to please lend your expertise.
    The list of BAPI's are :-
    1. BAPI_FUNCLOC_GETLIST
    2. BAPI_CONTROL_RECEPIE_GET_LIST
    3. BAPI_PROCORDCONF_GET_HDR_PROP
    4. BAPI_PROCORD_GET_LIST
    Edited by: aashrith on Nov 13, 2011 5:03 PM

    I suspect that they want you to build some test data rather than find some.  And for what you need, there is a lot of master data required.  It may or may not be there already, but the task you have defined is not that simple as one or two posts would be required.  I would google "SAP PPPI test data" or something similar.  You will probably find simple lists of tasks to build a sample Control Recipe or Process Order.
    Regards,
    Mike

  • Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

    Hi,
    Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
    T. Code is:  /SAPCND/GCM
    I need to load data on a file (extracted from 4.6) for service contracts.
    I tried LSMW : for this transaction, recording does not work.
    I am trying loading thru Idocs (LSMW). But that too is note really working.
    Do we require some custom development for this , or is some SAP standard funcntionality available ??
    Can anyone provide some valuable inputs one this.
    Would appreciate your responses.

    Hi Tiest,
    Thanx for responding.
    U r right, our clint is upgrading from 4.6 to ECC.
    So as per the clients requirements, we are maintaining all the configs for Services in CRM.
    Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
    What I am looking os some standard upload program.
    LSMW recording does not work.
    This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
    IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
    But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
    Till now, I am only able to define just one field name and a field value.
    I want this to word for mutliple entries.
    Hope u get my point.
    Thanx

  • Master Data Load for New Attribute

    Hi Users,
    We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
    I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
    This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
    When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
    Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
    Please suggest
    Regards
    Zabi

    Hi,
    The situation is:
    Field x from source maps to
    1. field y ( which was existing field ) and also maps to
    2. field z which is the new attribute.
    field y has to get updated for company codes 10 for example.
    field z for company codes 30.
    now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
    So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
    Master Data Load for New Attribute 

  • Master Data source for sales district or Region in CRM

    Dear All,
    Please let me know the Master Data source for sales district or Region in CRM.
    Thanks
    Regards,
    Sai

    Hi Tiest,
    Thanx for responding.
    U r right, our clint is upgrading from 4.6 to ECC.
    So as per the clients requirements, we are maintaining all the configs for Services in CRM.
    Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
    What I am looking os some standard upload program.
    LSMW recording does not work.
    This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
    IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
    But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
    Till now, I am only able to define just one field name and a field value.
    I want this to word for mutliple entries.
    Hope u get my point.
    Thanx

  • Identifying master data datasource for standerd DSO

    Hello Experts,
    I am in a process to upload a transaction data into a standerd DSO named "Shopping Cart" from SRM source system.Please let me know how I can identify what is the master data required to be uploaded before uploading transaction data.
    Also let me know general process for identifying master data for any standerd infoprovider.
    Regards,
    Mandar.

    Hi,
    You might need some of these listed below. I have worked with Bidding Engine part and we needed the Purch org, Purch group, Status texts MD datasources. Check in the Shopping cart flow (rules) if there are any lookups on MD objects. In such case you would need to maintain MD for those.
    http://help.sap.com/saphelp_bic735/helpdata/en/f7/62a43c24358d15e10000000a114084/content.htm
    http://help.sap.com/saphelp_bic735/helpdata/en/5b/63a43c24358d15e10000000a114084/content.htm
    http://help.sap.com/saphelp_bic735/helpdata/en/77/62a43c24358d15e10000000a114084/content.htm
    http://help.sap.com/saphelp_bic735/helpdata/en/49/f2783b3aef6f17e10000000a114084/content.htm
    http://help.sap.com/saphelp_bic735/helpdata/en/80/cc943cfbbf3478e10000000a114084/content.htm

  • "master data deletion for requisition" before master data loading

    Hello Gurus,
             in our bw syetem , for   process chains for loading  master infoobjects, all include "u201C master data deletion for requisition" ABAP
    process  except for one process chain. my question is:
           why that process chain for master data loading is different from others as for lacking "master data deletion for requisition" in it?
    so it does not matter if you include " master data deletion for requisition" ABAP  process in process chain for master data loading ?
    Many thank.

    Hi,
    ABAP Process means some ABAP program is being executed in this particular step.
    It's possible that for all of your process chains except for that one requirement was to do some ABAP program processing.
    You can check which program is executed by following below process:
    Open your process chain in planning view -> Double click on that particular ABAP process -> Here you can see program name as well as program variant.
    Hope this helps!
    Regards,
    Nilima

  • Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

    Hello all,
    I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
    My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
    The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
    But in this case, when I run it, it shows the error that I have indicated in the subject line.
    If you need more details about my project to identify the problem, please let me know.
    Thanks in advance.
    Solved!
    Go to Solution.

    -Please go through pattern matching example which comes along with labview fiirst
    Go to labview Help>>Find Examples and you can search for example.
    -You have create template with angle range and what type of pattern matching you want use.
    -For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
    Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

  • Master data loads for Attributes and texts failing

    Hello
    Master data loads for Attributs and texts are failing. The error is
    1. Lock Not set for Loading master data attributes
    2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
    3.Error  1 in the update.
    We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
    RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
    Any insight is appreciated.
    Thanks
    Inder

    Hello
    Master data loads for Attributs and texts are failing. The error is
    1. Lock Not set for Loading master data attributes
    2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
    3.Error  1 in the update.
    We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
    RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
    Any insight is appreciated.
    Thanks
    Inder

  • You do not have permissions to access a database that contains data required for this form to function correctly.

    I have dropdown on infopath form , and it receives data from sql server table ,  it works fine when i am running in preview mode , but when i am publishing form to sharepoint server and loading that form
    i am getting this
    You do not have permissions to access a database that contains data required for this form to function correctly.
    Can you please help?
    Thanks,

    try this one, if not yet
    Convert the data connection to UDC (store it in a Data Connection Library within the same site collection as the form library).  See if this works without any other changes, but if not, then...
    Manually edit your UDC file in Notepad (or your preferred editor) so that the authentication line is not commented out and so that it references the name of the SSO target app you created. 
    For Type, use NTLM.
    Ensure the user has rights to access the database
    Also ensure the connection file has been approved - A sharepoint admin can access a non approved Ucdx file. Go to the connection library and approve the file
    Also check this post having the similar issue:
    http://social.technet.microsoft.com/Forums/en-US/3196bafd-4bc3-40ab-ac2b-d149d1c3e0fa/sharepoint-2010-error-you-do-not-have-permissions-to-access-a-database?forum=sharepointdevelopmentprevious
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Maybe you are looking for