Master Data Scenario with SPS07 ???

Hi,
I have tried to realize the Master Data Scenario from Lars Rüter. Since I have installed SAP Netweaver 2004s SPS07 I downloaded the SPS07 application & Source Code from /people/lars.rueter/blog/2006/06/26/create-master-data-centrally-using-guided-procedures . The result Set perfectly shows the content from the Repository of the data manager.
I was able to request and approve the master data (BP),
But The created BP is not inserted into Data Manager. Apart from that the "Item Details" don't work, i.e. if I click on a record in the Result Set the record details are not shown and the following error occurs: "An error occurred. See log for details."
What did I do wrong and why is the created BP not inserted into the data manager ???
Please help!
ThankS!
Erdal

Hi Alejandro,
I went exactly through the steps given in the Scenario.
I deployed com.sap.mdm.tech.connector.sda and com.sap.mdm.tech.mdm4j.sda.
1.I unarchived the H2G_VendorPortal.a2a file and loaded
the created repository --> OK.
2.I started MDM Data Manager and tested connection to
repository --> OK.
3.I created a portal system and everything was fine.
--> OK.
4.I created system alias SAP_MDM_Repository_Vendors
--> OK.
5.I did user mapping and was able to connect to mdm
server --> OK.
6.I created a role called vendor and tested it.
--> OK.
7.I created a group and assigned the role.
--> OK.
For step 7 in the scenario I deployed SP7_sdn.comMDMGPSCF15_GPDEMO_C20060626050239.sca AND SP7_sdn.comteched.demo.caf.gp.content.sda.
Hope that was the right thing to do.
I have acces to the repository from the portal. I just can't cklick on a record entry and get the details of the record shown in the item details.
Besides when approving & creating the new BP the newly created BP is not inserted into the repository - although the request (md_user), specification (md_spec) and approval (md_manager) are correctly done.
Hope, you have a better idea now.
ThankS!
Regards,
Erdal

Similar Messages

Master data records with one key

Hello All,
I have scenario that I need to load the master data records with one key.
For ex--
Cluster            Dcode               version
5000                 DC1                  2008
5000                 DC1                  2008
5001                  DC1                  2009
Could you please let me know possible ways.
Thanks

In your case if Cluster is the key then the underlying attributes data will be overwritten when the same cluster key comes.
as per you example data finally it loads only two records in to the target, since first two records key is same.
Hope this helps.
Veerendra.

Migration of Equipment Master Data together with PRT data

Hello Experts,
we need to migrate Equipment Master Data which have activated the view PRT data. Most of the fields in this view are stored in table CRFH. Is there a way to migrate Equipment Master Data together with the PRT data of the Equipment? All the BAPI's I found do not have an import structure for those fields. Is a batch-input the only way?
Does anybody know a mass change transaction for Equipments?
Thank you and Regards
Christian

Hi Krishna,
You can use the standard batch input program RFBIDE00 in LSMW to update the customer master data. However, there might be scenarios where you might be required to update the fields which do not get updated by the standard bacth input program. If any of such fields are defined as mandatory, then you wont be able to use this method directly.
In such cases you will have to either create a recording to poplate the fields which do not get updated by the standard program and use both the recording and the standard batch input program to update the customer master data OR create a recording for customer master create and use the same in LSMW.
Best regards,
Harsh

Add new bank account in master data client with idoc DEBMAS.

Hi friends,
I have an issue.
I am trying to add new bank account in master data client with idoc DEBMAS.
But when I submit, then just overwrite the bank data but not add.
I try playing with MSGFN code with value '009' or '004' but nothing done.
Someone has met this issue ?
Thanks for your answers.

Thanks,
But what do you mean ? where can I find this path , in img ?
Fields->Set Qualified Update ->Append Option
I think we have to use another idoc :
BUPA_C_BANKDETAIL_ADD01 SAP BP, BAPI: Add Bank Details
I'll try...

Master data attributes with direct update...its very urgent

Hi all,
Could anyone tell me how to laod the master data attributes with direct update in the infopackge..
provide steps to create master data attributes and how to load..
Thanks,
Manjula

Hi Manjula,
Flexible Uploading
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
honor with points if this helps,
Sudhakar

Master Data Management with SAP

Hi
Master data management in SAP platform is in Compilation
of report structure where you have additional variables such as field documentation code a field processor and
a system capable to do this compilation./In other words SAP Master Data Management is a code programmer In Java
. Master data Mangement is a programmer's capacity to do
his compilation in Java. Vb C++ is the system mangement architecture. Code is fabricated in this environment for Sap Master Data Management
K Balakrishnan

Hello Michelle,
First of all, MDM Admin UI and SRM-MDM Search UI both are in same sca file (SRMMDMCAT20SP03P05.sca) and there is another sca file with API and MDM Connector (MDMJAVAAPI06_2.sca).
Remember that files name might be change as per the business content version.
So there are two file which you need to deploy. You can deploy these two file on any Web Application Server (WAS 7.0 and Above) using Software Deployment Manager (SDM) of SAP NW AS J2EE installation.
For further information about these files, you can refer the SAP Note- 1057316 -- SRM-MDM Catalog 2.0 - Installation & Configuration.
For checking the successful deployment of these SCA files, you can check with the mentioned below URL:
http://ServerName:PortNo/webdynpro/dispatcher/sap.com/tcmdmsrmcat~uisearch/MDM_SRM_UI_App
go to the above link, try to connect with the MDM Server which you have installed. After connecting the MDM Server, Choose your SRM-MDM Catalog repository and try to connect with the user as "Master" with blank pwd. If you are able to login in the repository, it means you have successfully deployed the correct sca files.
For further details regarding this scenario, you can refer my answer in below thread:
installion of SRM-MDM Catalog 2.0
I hope, this will clear your doubt.If you need further help, Kindly update us.
TNR,
Saurabh...

Customer Master data upload with Ref Customer Master

Hi all,
I want to extend all the Customer master records of a particular Sales area to another new Sales area (copy from one sales area to other). What is the easiest way to do this?
Am trying to copy by giving referrence number, but still i had to give all the relavant data which i suppose shold not be. So plz guide me the best way to copy the master data of all the customers.
Thanks in advance.
Cheers,
Anil.

We have had the similar issue. I simply downloaded the customer master sales area data and replaced the distribution channel with new one in excel then division and recorded the LSMW for this only thing u have to be careful is while extending u have to use the current customer number as refernce which has to be recorded. this entire process till execution took about 30 mins + upload time.
It works perfect.

FI master data integration with hr master data

Dear Xperts i had an issue regarding integration of FI and HR Master Data.in pe03 i changed the feature ANLAC by Replacing N with Y because of this the integration get ON but the issue is that whenever our FI consultant assign asset to any personal number say for example Personnel number 1.then if i create it40 for personnel number 2 that asset which is assigned to personel number 1 is displaying in it40 in asset fiel of personal number 2 but we assigned to 1 not to 2 what will be the problem could u please help me in this regard

Dear Experts.
Say for e.g i assign two different assets to two different personal numbers e.g asset no 14000235 to pernr no 1 and asset no 14000236 to pernr no2 but when i maintian them in pa30 in infotype40 if firslty before mainting asset no for 1 i maintian it for pernr no 2 it is displaying asset no 14000235 which is for pernr no 1 not for pernr no 2 is their any way that respective asset number should come in personal to whom i assigned in FI
Regards

Asset master data synchronization with HR Master data

Dear Experts:
I am FI consultant and i am doing Research on Synchronization of asset master data with HR master data. Our management wants that if company gives any thing which is regarded as an asset e.g Laptop, expensive tools e.t.c to its employee then beside opening its asset master data in FI it should also be updated in HR Employee master data. For this from FI side there are 3 asset classes for which we want that if any asset is opened in these classes then the data should be updated in HR. I have turned on Personnel number in screen layouts and have fetched this field in asset reports. We want
1...Asset Description
2...Cost Center
to be updated in HR master data. Now my question is that how this can be achieved. Is it possible? What configuration will need to be done for it.
Regards

Hi
FOr assets created in FI and reflect them in HR use the feature ANLAC and it will take care.
This feature determines whether or not the system checks the fields Asset number in infotype 0040 (Internal Control) and Loan object number in infotype 0040 (Objects on Loan) against database ANLA.
R K

Join Master Data table with fact table

Hello gurus.
I have a requirement on a characteristic. I have to obtain the description of those values that are not filled with data in the cube, the example looks like this:
Data in the cube:
Characteristic 1 | charactersitic 2 | value
AU                           HPDV              200
TB                           OPPG              500
TC                           HPDV              900
TR                           OPMR             400
                               HPDV              300
                               OPMR             200
                               OPPG             100
Master Data Table:
                            Description
HPDV    AU       Auditoria
OPPG    TB       Servicios Logisticos
HPDV     TC       Occidente
OPMR    TR       Oriente
HPDV     AI        Punta Norte
OPGS    CV       Escandón
HPDV    QR       Barquisimeto
HPDV    MM      Valencia
HPDV    DT        Barcelona
I need to display in the query only the description of the characterstic whose data is not in the cube, according to the example the values that are missing in the cube are:
HPDV     AI        Punta Norte
OPGS    CV       Escandón
HPDV    QR       Barquisimeto
HPDV    MM      Valencia
HPDV    DT        Barcelona
How can i achive this ??
Thank you in advance.

Hi Guillermo,
I think you are trying to achieve this: To display characteristic values for which no transaction data or only low values exist for the selected period.
See here for the solution details:
http://help.sap.com/saphelp_nw04/helpdata/en/3a/d1603d13b5c72ee10000000a114084/content.htm
Hope this helps...

Master Data modeling with data from several source clients

Hi people,
We have a modeling issue at hand..
From several R/3 sources, separated as Clients (eg. client 100, 101, 102 etc.) we will load data (transactional and Master Data) to one BW system.
Now, I am wondering what is the best way to avoid Master Data issues here, when data can be different for the same objects in the various source systems (clients)
Example:
In source client 100, 0MATERIAL 1000 = PLASTIC
In source client 101, 0MATERIAL 1000 = WOOD
I have tried to understand how compounding with 0SOURCESYSTEM works, but I can't see how that will work for us, since we may have several clients on the same sourcesystem (e.g. client 100 and 101 can be on the same system). This would not help me separate the masterdata.
- Does anyone have experience with this they could share?
- Is it a possibility to add 0LOGSYS or something to our InfoObjects that we will load?
- Do we then add the InfoObject to the cube in the end?
Any inputs that can clarify this is appreciated. Points awarded ofcourse!
Cheers,
Jon A.

Hi,
Donot go with one server to define it as a source system .I mean ,Even though you have only one R/3 server . you have 3 clients in it. So go with Clients to define the source systems.
So in BIW You must have 3 different source systems in Source system tree. Am I irght?
So all of them has different logical system names.
So use 0LOGSYS as compounding characterstic.
With rgds,
Anil Kumar Sharma .P

Material Master Data related with an Asset

Hi Guys
I was told that the material master data that I am creating needs to be related with an asset hierarchy, any one know where Do I relate material master data with the asset hierarchy?
thanks
Carlos

Hi,
Though you Material grade is time dependent and sequentially changing.
You can create 4 different DTP with Grade selection (only 1 Transformation).
For example, 1 DTP with filter Grade A, another DTP with grade B, so on.
and executive all 4 dtp sequentially and activate master data after every DTP run.
Hope it will workout.
Thanks,
Balaram

Master data tables with unwanted records from transaction data upload

Hi Friends,
I have a master data table for infoobject 'C' with compounding characteristics 'A' & 'B'. I upload this master data with values given below:
 A, B, C, Short text, Long text
 P, 10, BBB, Apple, Big Apples
 Q, 20 , XYZ , Tomatoes , Red Tomatoes
When I load data into ODS from a source system, I may not necessarily have data for all these 3 fields in these transaction record. Example:
 A, B, C, D, E
 P -1 FFF 20 30
 Q 10 GGG 10 40
 The problem is when I upload the above transaction data, it populates the master data table too with these two new records 1 -1 FFF and 2 10 GGG, which I would like to avoid.
 Is there any way?
 Will assign full points to anyone who helps me here.
 Thanks,
 JB

Hi JB,
If you want to load transactional data and still want to prevent the population of the master data table, I don't think it is possible, as it is goes aginst the data consistency in the warehouse.
However, if you can afford not to load transactional data for such cases, you can activate referential integrity check for the infoobject C. Then neither transactional data nor masterdata enter the datawarehouse until you maintain masterdata yourself for the infoobject C.
hope this helps.

Master data failing with Duplicate records

Dear All,
Daily the ODS XD0SDO08 is getting loaded with four requests.
While loading Master data Delta from ODS XD0SDO08 to 0Doc_Number and Cube XD_SDC08, regularly it's getting failed with the error "54 duplicate record found. 1130 recordings used in table /BI0/XDOC_NUMBER" But after deleting the Request from the 0Doc_number and the cube XD_SDC08, and reconstructing from PSA, it is succcessfull.
If I check the PSA,there are few records in PSA, in which each Sales document number has two after image records and two before image records.If I count the number of these records they are almost equal to the number of Duplicate records we are getting in the error message.
As we are loading to cube XD_SDC08 and 0Doc_Number, we don't have the option of Ignore Duplicate records in the Infopackge.
Please suggest me a solution as I have to delete the request manually and reconstruct it daily.
Regards,
Ugendhar

Hi ughi,
As ur telling that data is sucessesful in cube but not in infoobject check the records in infoobject wheather their is M version and A version if both are there ..some times load fail with duplicate data record due to this problem ...Run Attribute change run for that infoobject and check ..
if this will also be not sucessesful ,and as per ur update after reconstruction it is sucessful means their will be problem in update rule heck once
another thing u will not get ignore duplicate data records because here infoobject as marked as data target ..
if u think my suggestion is helpful assigin point to this thread
regards,
Gurudatt Bellary

What exactly is Update method Master data attrib with a Time dependency ?

Hi Experts,
I have a Update rule in which i have an Update Method "Master Data Attrib of " with Time dependency
basically we are loading (update rule of )   0PAYROLL AREA ,
              at Master data attribute of we have 0EMPLOYEE
              at Time Dependency When reading Master Data END radio button is checked
              frm it is mention as 0CALDAY.
please explain what is function of 0calday here?
I understand that 0PAYROLL AREA is a attribute of 0Employee and since from R/3 we are getting only 0EMPLOYEE so we are filling it from 0employee but what is the significance of 0CALDAY here?
Regards,
RG

Hi RG,
It fills the valid value of 0PAYROLL for a particular 0EMPLOYEE in a particular time frame.
Elaboration.
Say Employee          Payroll                  Valid from          Valid to
        RG                    1000000                 01.01.2007        31.12.2007
        RG                    2000000                 01.01.2008        31.12.2008
        RG                    3000000                 01.01.2009        31.12.2009
The if your transaction data has RG employee in it with a transaction on 0CALDAY = 12.05.2007 then the valid payroll at that time would be 100000.
On Calday 05.05.2009 your payroll would be 300000.........
So for different days different payroll values would be valid.
You require calday to find out which payroll value is valid in the timeframe of a transaction.
In your update rule it is bringin the value of valid attribute value for the time of the transaction.
Hope it helps,
Regards,
Sunmit.

Master Data Scenario with SPS07 ???

Similar Messages

Maybe you are looking for