Master Data Sequence load

Hi guys i 've load data to an infocube and i have a lot blank records, i've read that this is because the master data not was loaded or loaded after transactional data, but my infocube have a lot of characteristics that have master data, is necesary to load every one before load tha trasactional data or there´s a way to load all the master data in one step instead of one by one?
I hope that somebody could help with this
Regards...

Hi Oscar,
It is recommended that you load the master data before the trsancational data so that the data cna be activated i.e. Sids are created for the char values and ready to use at the time of transactional data load. Are you doing a lot of master data look ups in your update or transfer rules, or laoding the master data attributes to the cube? If not, then you really should not have "blank" values.
You can go ahead and load the master data after the transactional data too.
You do not have to load all the chars each time. You can set up the delta for the master data where possible. For others, you can judge whether they have to be laoded everyday or may be once a week or once a month.
Hope this helps...

Similar Messages

Each time master data full load removes previous data and load with new ?

We load company code (0COMP_CODE) master data (full load).
1st day, we check company code master data, the record count is 150, 2nd day, the record count is 90. It sounds like the master data full load each time would clean the previous data and load with new data, am I right? If what I guess is right, then what setup is controlling this?
Thanks

I dont think it does cleanup.
MD records in the new load simply overwrite the records already present in the master data.
I mean if same record comes again its overwritten.If new record it gets added.
I wouldnt expect number of records to reduce drastically from 150 to 90.
Maybe before MD activation records could be more(as there will be both M(modified) and A(active) records).
cheers,
Vishvesh

Master data delta load failure

hello Friends,
Today i have faced cost center master data delta load failed in my project.
The error is - Requesting the last delta for master data is not supported.
As it is delta load, I have followed below steps.
1. Request made forcefully red.
2. Triggered same infopackage and load completed successfully.
friends, can you please outline the error and why it has came, as i have checked OSS notes but still not able to find exact notes for it.
As i have to give the reason to the clilent , please your help weill appriciated.
Please suggest me this error belongs to , and why it came.
s it is completed sucessfully still i have to give details to my client.
Regards,

Hi,
There r lot of reasons to fail the master data load, the error which u got was because of failure in the source system.
The error is - Requesting the last delta for master data is not supported.
This is due if a delta is still running then it gives that message, u have to check whether it is running in the source system, if not u can make it to red then repeat the load.
for checking follow the menu path from monitor ---evironment->job over view->in source system, there u have to enter the user id password it will take to directly SM37 with that job name.
Hope it helps.
Regards
Siddhu

Is there settng source system level for master data delta loading perfo

Hi Viwers,
Good Morning,
I am loading data from the source to target level for Master data it is taking too much time,I would like to know the how to increase the master data delta loading performance.
I would like to know the source system level is there any setting requited & target system level also.
Please give your inputs..........
Thanks & Regards,
Venkat Vanarasi.

Venkat -
Are u deleting the indexes of data target before delta loading ? If not,delete the indexes of data target before delta loading and recreate them after delta loading is done.This procedure increase load performance.You can perform whole procedure in process chain.
Anesh B

REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS

Hi Guru's,
REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS?
AS I AM NEW TO SAP-BI CAN ANY ONE GIVE THE DETAIL EXPLANATION ON IT.
IT WILL BE GREAT AND HELPFULL.
Thanks and Regards,
CM

Hi CM,
yes you can perform the repeat delta even for the master data if the datasource which was supplying the data was delta capable.
You can do the repeat delta only in case if your previous request was erroneous and dont forget to make the request red in the status,so that system will treat like you are requesting the failed request once again where in case you will miss the previous request, i,e erroneous request if you dont make the request red.
when you make the request red manually in the status,the pointer will move to the previous request once again in the delta queue and there will be no chance of missing the delta records.
This process was same for both transaction as well as master data.
Regards,
Sunil...

Master data Full load to Delta load

HI
I have Order number (ZONDRNO)for this we are loading the Master data form BW to BW full load.
This Order number is Generi Data source
Can any one help me how to do master data Full load to Delta load.
Thanks in Advance
kumar
Edited by: kumar reddy on Oct 9, 2008 3:14 AM

Hi,
Firstly you are stating that you are loading from BW to BW. How are you doing it ? Are you doing through a datamart ?
Secondly you have also told that you have created a generic datasource so from this we can deduce that you are not doing a datamart load but you are doing through a datasource.
Thirdly to achieve delta for a generic datasource you should make sure that the datasource in question here is delta enabled.
Once all these are done all you need to do is a delta init and schedule further delta loads.
Regards,
Pramod

Deleting master data after loading transactional data using flat file

Dear All,
I have loaded transaction data into an infocube using a flat file . While loading DTP i have checked the option "load transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
While loading the flat file, I made a mistake for DIVISION Characteristic where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
But when I see the master data for DIVISION , i can see a new entry with value '4000'.
My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
Please suggest me on this.
Regards,
Veera

Hi,
Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
If this master data is not used any where else just delete the master data completely with SID option.
If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
Hope this helps
Akhan.

Need more Info about "Load transactional data when master data not loaded"

Hi,
Can you please explain me this option in the infopackage " Load transactional data when master data is not loaded"....
Say i load a transactional data record which has a material no. AAAXX.
In the fact table, the material no. is replaced with the corresp. DIM ID.
Now, assume that there is no entry for this Material no.
AAAXX in the master data table...so no DIM ID for it..
How is it then stored in the fact table ?
Hope i have managed to explain the scenario..
Thanks in advance,
Punkuj

Hello Punkuj K,
How r u ?
No, if the entry for that Material Number "AAAXX" is not there in the Master Data then it will create a SIDs & DIMs ID for that & Transaction Data will be loaded.
Use
Choose this indicator if you want to always update the data, even if no master data for the navigation attributes of the loaded records exists. The master data is generated from the loaded transaction data. The system draws SIDs. You can subsequently load the master data.
Dependencies
The texts, attributes, and hierarchies are not recognized by the system. Load the texts / attributes / hierarchies for the corresponding InfoObjects separately.
This function corresponds to the update. Possible errors when reading the master data into the update rules are not associated with this indicator.
Recommendation
We recommended loading the master data into the productive systems in advance. Select this indicator especially in test systems.
Best Regards....
Sankar Kumar
+91 98403 47141

How to load master data hierarchy load from BI to BPC 7.5 NW

Hi,
I am testing master data hierarchy data upload from BI to BPC. However when i run master data hierarchy mport package, it's always displaying a warning message saying that no records are returned from "Z_PFT_CTR" which is my info object name.
My transformation is as below.
0BUS_AREA=BUS_AREA
0COMP_CODE=COMP_CODE
0CO_AREA=CO_AREA
0LOGSYS=LOGSYS
0OBJ_CURR=OBJ_CURR
0PROFIT_CTR=PROFIT_CTR
0RESP_PERS=RESP_PERS
0RESP_USER=RESP_USER
Conversion is as below
ID=ID_CONVERT.xls
PARENTH1=HARI.xls
Hierarchy i have mapped in conversion file from Source Inforobject 1000PCDUMMY-1 to BPC PARENTH1 Destination.
Any suggestions plz?

Hi,
Just follow the docs in "How Tou2026 Automate BPC 7.0, version for the NetWeaver Platform Master Data Loads from BW to BPC"
where you will get detail step-by-step procedure to load data.
Check the url:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
Before that you have to transport into BPC system the load to work fine.
Thanks
Debasisha

Master Data Delta Load failing

Hello,
We have a master data process chain that does a delta load of 0MATERIAL_ATTR, OMATERIAL_TEXT etc....
On 3/26/06 at 8:15 pm was the last time this process chain ran successfully.
On 3/27/06 at 8:15 pm the process chain failed on the first step: 0MATERIAL_ATTR (Delta Update) and thus did not process furthur.
The reason the chain failed was because the message server was down, so no BW requests were successful. i have all my other data loads running correctly now. So this Master Data problem is the last mystery I need to figure out.
When I look at the monitor for the failed 0MATERIAL_ATTR (Delta) I see a message that says "Non-updated Idocs found in Source System"
When I click 'Process manually' in the monitor. it says 'incorrect data packets are now updated again'
The chain was attempted to be ran on 3/28/06 at 2:25 pm and it failed again at the same step. The message in monitor this time was 'Sending packages from OLTP to BW lead to errors'
The chain was again attempted to be run on 3/28/06 at 5:06 pm. Again it failed at the same step. the message this time was 'Update mode R is not supported by the extraction API'.
I tried to manually run the infopackage outside of the chain and I got this message when I clicked 'Start'. "the last delta update was incorrect" Therefore, no new delta update is possible. You can cancel the request or: Attempt to load the data of the last delta update again." I click 'Request again' and I get the message: 'Update mode R is not supported by the extraction API'.
All of these loads transferred 0 records and failed.
Any advice on how I can get my master data on track again?
Thanks,
Nick

Hi Nick,
I would suggest that you do a full load to get all the data and then ReInit the process. Since it is master data, the full load and ReInit is possible with no major issues.
Re: Update mode R is not supported by the extraction API
Hope this helps...

BW - Delta for Master data not loading

Hello All,
I am not able to load delta for master data of vendor and material.
The initial load works fine but when I load delta it gives an error
" The extraction program does not support object 0vendor"
" ALE change pointers are not set up correctly"
Do i need to activate the change pointer in BD61. I was not sure so checking up with all experts.
Regards
Vanya

Hi Ravi,
We faced the same problem as you for 0MATERIAL_ATTR and we solved it by the following steps,
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
We have have got resolved by doing these steps and it may help for your problem as well.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence

Error during master data delta load

Hi All,
I am loading delta master data to an info object 0DPM_DCAS through a flexible update.
Received an error "101 data records in table /BI0/XDPM_DCAS marked for deletion...
158 duplicate record found. 126 recordings used in table /BI0/XDPM_DCAS" at the Update level.
The status is red. There is no additional info in the Error Message button.
Also subsequent deltas cant be triggered and it says "Repeat cant be requested".
Please suggest an explanation and an way out.

Hello VishNo,
How r u ?
This error is because of the Duplicate records existing in the InfoObject. Also, seems to be the problem in the Master Data Time independent navigational attributes table. Check the data and also the Monitor screen Details Tab entries & come back again.
Best Regards....
Sankar Kumar
+91 98403 47141

0material master data delta loading

Hi,
Could anyone let me know how can i check in R/3 side if 0material delta laoding getting 0 record?
What I mean is that: we have a process chain loading all master data, including "0materail" Material Number(0MATERIAL_ATTR), and Product number(0MATERIAL_TEXT).
and it runs once a week.
this week, I noticed that there is both 0 records has been laoded from R/3 to BW for both (0MATERIAL_ATTR) and (0MATERIAL_TEXT) delta load. while teh other master data load runs normal, get records as normal.
But i am not sure how to check in R/3 side, to ensure whether there are some new records created during this week or not.
which transctiion and table i should check.
Please advice,
Ping

Check there is any Selection criteria in the Infopackage data selection tab. if you have any selection provide the same selection in MARA.
If you don't have any selection and if u won't see records in RSA3 means... some problem with extractor.
all the best.
Regards,
Nagesh.

Request Status for Master Data Attributes Load

Dear All,
We are trying to load attribute master data and volume of which is relatively huge around 10,000 records.
We are facing challenge while updating attribute data from master data info object , the load status remains in yellow status and when we went to details screen it states that data is transfered to transfer rule . ( it has been loaded successfully in to PSA).
Could anybody please give some hint on this challenge ??
Regards
Kapadia

Hi Paolo Siniscalco,
You are right, as number of records are more , i have chosen update of "Only PSA" and then "Subsequently in Data Targets".
I tried other option also which is infopackage schedule "Execute in Back ground" and
"Request batch process runs untill all data is updated in BW". And process went in to infinite loop.
Some how i am not able to track out why the request status is not changing .
Regards
Kapadia

Change form Mode as Add for master data while Loading

Hi,All
I have a master data form(user form). By default it will load and shows Find mode but i dont want find mode i want add mode after loading
plz suggest me a good idea..
By
Firos.C

Hi,
After the form is loaded in the load event, change the form mode.
objForm.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE
Or
objSBOAPI.SBO_Appln.ActivateMenuItem("1282")
Hope it helps,
Vasu Natari.

Master Data Sequence load

Similar Messages

Maybe you are looking for