Master Data SID table path deleted

Hello BW Gurus,
I have a Master Data InfoObject. i was doing something in development and by mistake I deleted the MasterData table(I gave the master data table path in tcode se14). Now I When I go into Master data tab,I dont see SID table path anymore.
When I browse the Maintain masterdata,I see some data and when I say display data,I dont see any. I dont know whats going on with this object. Can someone tell how do i get the SID table path in the Masterdata tab of this object.
Thanks in advance
Neo

Trt activating the info object in RSA1.
Ravi Thothadri

Similar Messages

To enhance 0EMPLOYEE master data attributes, need to delete and load again?

Dear Support,
In order to meet business intelligence demands, I had three more attributes (region, time rate and worksite) to 0employee time dependent characteristic. The datasource to load 0employee attributes and its structure were enhanced to fill the new fields.
After first load, 0employee master data could not be activated. So I deleted 0employee master data, what I couldnu2019t do without deleting its data from transactional HR infocubes. I deleted transactional data and afterwards master data. I load it again and activated, with no errors this time.
This occured in development system.
Changes are about to go to production environment and deleting almost all transactional RH area infocubes and 0employee master data is something that we all want to avoid.
I am asking if there is a workaround in order to solve this without doing the stated time and resources consuming task.
Thanks in advance for your help,
Best Regards,
André Oliveira

Hi Andre,
You should be able to do a full load to achieve this. No need to delete the data. If there are corrupt data in BI with overlapping time periods, fix it by maintaining the master data. If corrupt data comes from source fix it in PSA.
Also you can specify to load the data for a time range only which might be easier than to load all history.
good luck,
vijay

Master Data Background Tables

Hi Xpertz
Could any one tell me the answer to the following sorry to asking this silly question in Sdn .After a long time just i am
reviewing my basics i got alittle confussion in the following
what r the master data back ground tables i know that P,Q,M,X.tell me what is the difference between thez tables.
If any docs please send it to the following id : [email protected]
Any answer will appreciate
Thanx In advance
Best regards
R K
**NO need to say good answers will get full pointz*****

Hi,
In fact, do you really need to know the names of these master data tables? The same for the tables of a cube...
SAP BW will generate these tables for you, depending of your settings. An attribute is time dependant, then SAP BW creates a table to store at least that attribute with Dateto and Datefrom. One other is time dependant AND navigational. Then SAP BW will generate another table.
Your texts are language and/or time dependant, then again SAP BW will do its job.
Same for the cubes.
In 5 years of BW consulting and training, I checked only once the technical settings of a cube, because a full extract of that cube (containing only one request) was generating less rows in a backup cube (completely similar).
And I could learn that the key of the fact table of a cube is not unique when you run SAP BW under ORACLE.
But, once again, I could have let it beside, because the results were good, the backup was correct, and I investigated only because I was curious.
So, do you really need to know them by heart?
Regards,
Laurent

How to trace master data source (table-field)?

Hello All,
Please help, its Urgent!!
I have the following 4 characteristic requirement in BW from PM/PS module.
Master data source (format: table-field)
AFVV-FSAVD - early start date
AFVV-FSEDD - early finish date
AFVV-SSAVD - late start date
AFVV-SSEDD - late finish date
can anyone tell me the procedure, how to find them in R/3 n if there r any standard business content for the same?
Thanks in advance,
JP

Go to RSA5 Tcode in R/3, under SAP R/3 Application component, you can get PO/PS Components, and under that you can get PO-IO/PS-IO Components, here you can check all the vaialble master data datasources.
KJ!!!

Why SIDs start with 2 in master data S Tables?

Hello All,
When we create infoobjects, S table(/BIC/S...) is created to store SIDs and respective values.
However, these SIDs start with 2 and not 1.
Please, can anyone tell what is reason for this.

Hi,
This is happening due to number range maintainance for SID values in your system.
Check below article for more information,
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a6e3ff-f000-2d10-b59d-8ef35e248f83?QuickLink=index&overridelayout=true]
Regards,
Durgesh.

Restoring the data from table after deletion

Hi,
If I delete the data from the database (using delete command) , is there anyway to restore that data. I know it looks bit weird but I'm checking whether there is any technique in abap by which we can restore the data.
Your help would be appreciated.
Thanks,
Kranthi.

Hi Kranthi,
When you delete lines of a database table using the DELETE command, the process is only complete after a database commit. Before the commit, any database change can be reset using a database rollback.To be able to perform a database rollback, a database system must generate a copy of each database object before making a change. These copies are kept in a rollback log until the end of an LUW. An overflow of the rollback log always results in the termination of the transaction which caused it. For example, attempting to remind a large number of defaulting customers in the same transaction could trigger such an error. You can only solve this problem by dividing the set of database updates into several smaller units ( LUWs) for the database system. You use this statement if you cannot be certain that all the database changes have been executed correctly.
For your information :
An LUW begins each time you start a transaction,when the database changes of the previous LUW have been confirmed (database commit) or when the database changes of the previous LUW have been cancelled (database rollback)
An LUW ends when the database changes have been confirmed (database commit) or when the database changes have been canceled (database rollback). Within an LUW, database changes are not made until after a database commit. Prior to this, any database change can be canceled by a database rollback.
Cheers
Nishanth

Comparing InfoProvider table (Master Data P table) with the contents of the

I have compared the contents of the ODS and the InfoProvider (it is an InfoObject). I have compared by just going to the tables and selecting the Number of Entries option. However, the InfoPackage load (which is an Init) shows a failure and there are red squares next to the last six packets. Should I do a manual update of these packages anyway and if I do is there any consequences ie duplicate records. Thanks

Hi Niten,
as already explained, there is no problem to do a manual update of single packages...anyway, if you are not sure or you don't feel this procedure much safe, you can load all again starting from PSA (if your load fail AFTER all data was uploaded in BW)...
Bye,
ROberto

POS DM master data check

Hi all,
is it possible to perform articles master data check (eg. ean code or article code existence) on sap retail master data instead of bw 0material?
Thanks a lot
Ado

Hi Anthony,
here some answers to your questions:
1.) How does it check the existence of related master data? If you look at the details of a delta infopackage, you will not find an option to check for master data as compared to a normal delta infopackage.
==> you cannot check the refrential integrity via the InfoPackage, hence you have to this via transormations (if needed)
2.) Will it load the transaction data even if no master data exist for the transaction data?
==> Yes
3.) Also in this process, will it create the master data SID table entries while it loads the transaction data into the DSO? There may be some master data referenced by the transaction data which may not exist in the source system yet and therefore not loaded into the master data infoobjects yet.
==> Yes, but this behaviour is the same as for periodic (non-RDA) transactional data loads.
4.) The concern I have is when running a process chain to load master data such as 0ACCOUNT, 0COMP_CODE and followed by an Attribute Chain Run at the end of this process chain, will the locks established by this Attribute Chain Run crash the RDA daemon when it tries to load those transaction data that have new master data in them ?
==> You do not have to worry about conflicts / concurrent locks with the Attribute Change Run. The only process that could be critical, is the loading via RDA and periodic master data via DTP, which could result in a error in the DTP (you can resolve this very unlikely event by restarting the DTP or by triggering the re-load of the master data from the source system). In general, we would assume that these 2 events are highly unlikely to conflict.
Cheers
SAP NetWeaver BI Organisation

Mismatch between Master data table /BIC/P and SID table /BIC/S

Hello All,
in our master data table we have logsys in key
after a system copy we had a problem with logsys name, when we have copied our bw prod system in test system we find prod logsys like value, the BDLS doesn't change all values for all structures and some master data table still have prod logsys instead of test logsys but some records have test logsys values
for example:
our production logsys is: BIP300 and our test logsys is BIT300
in our master data test table we find had some records logsys value like BIP300 and others with BIT300
all our ODS and CUBE have the right logsys value in test "BIT300"
we have developed an ABAP report to execute on selected tables to change logsys from BIP300 to BIT300
we execute the report on only P master data table like /BIC/PZCOOR and it's work fine and has changed all the records values
from BIP300 to BIT300 and this program has eliminated all duplicate records
the problem is when on our master data try to view data we find that bw return data from SID table /BIC/SZCOOR
in fact if we go to control data on /BIC/SZCOOR table we find that there still are records with logsys BIP300 and BIT300
and the same if we execute our query on ZCOOR we have values with BIP300 and BIT300
how should we fix this problem?
if we execute our ABAP report on /BIC/SZCOOR to change logsysname we can fix that or we could have problem?
please can give me some useful help
thanks a lot
Bilal

Hi ,
Follow the sequence of deletion .
1.Delete data from cube YMM_*
2.Delete data from 0pur_c*
3.Delete data from 0material .
4.Delete data from info_rec .
Best option would be do selective deletion for these four materials and run a repair request then after to update into data target.
Hope that helps.
Regards
Mr Kapadia

What happen if I delete the Blank row in Master Data Table

This is what happened:
I have an InfoObject Item has only the key and description. I wrote a program to delete all Master Data in Item.
DELETE FROM /bic/TItem.
DELETE FROM /bic/SItem.
COMMIT WORK.
I still able to load Master Data to Item succussfully without a blank row. But I remember 1 blank row always gets inserted to the table, right? In my case, it's not ture. I would like to know why and what's going to affect if there is no blank row in the table?
Thanks.

Hi,
I guess there should be no impact but why do you want to delete the row. I guess at some point the system would still insert a blank record.
Bye
Dinesh

Deletion of master data for 0CS_ORDER

Hello Friends,
I have a requirement to enhance an IOBJ 0CS_ORDER with Order status values(2 new statues are added). I have done the enhancement part to the extractor in the source system side. Now after replication in BW, to add 2 new IOBJs in CS_ORDER, I need to delete the master data.
When I try to do this, I get the msg that some master data could not be deleted.
This is fine as we have transaction data loaded for large no. of objects which has 0CS_ORDER.
In dev, I have deleted the master data using SE14 for tables P, S , X, T.
My concern is in Production, I have huge volume of transaction data. To transport the changes, I need to delete master data. But this would require deletion of Transaction data from all IP where CS_ORDER is used.
If I do so using SE14, and tranport the changes and later load MD to CS_ORDER. Will this cause INCONSISTENCIES?
What can be other possible ways??
Please share your opinions.
Many Thanks,
VA
Edited by: Vishwa Anand on Sep 2, 2010 5:36 PM

Definitely Yes.
It will damage all the SID connections earlier which this master data had with the other objects likes transactiona objects (ODS, CUBES etc). Even You can not access the data from the cube or ODS where the navigational attributes are flagged for reading.
So do not use SE14 for deletion of MD. This is very specific to use.
You can delete the Master data as long as its not been used in other targets so that you can refill it easily and also there wont be any inconsistencies..
Hope this is clear for you..

Error while deleting master data

Hello all,
i require some help.
i am unable to delete some record from the master data it gives me a message "y table for the characteristic does not exist". the master data object does not contain any navigational and time depended attributes.
the BW system is upgraded to 7.0.

hi shakir,
if u use this links, u can get some idea
Q table - Time dependent master data attributes
Y table - Interface between master data SIDs and time dependent navigational attributes SIDs (Q is linked to the Y table)
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6365e07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/caceae8dd08e48a63c2da60c8ffa5e/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/13/c3e7379899d06fe10000009b38f8cf/content.htm
with hopes,
Raja Singh

Deleting master data after loading transactional data using flat file

Dear All,
I have loaded transaction data into an infocube using a flat file . While loading DTP i have checked the option "load transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
While loading the flat file, I made a mistake for DIVISION Characteristic where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
But when I see the master data for DIVISION , i can see a new entry with value '4000'.
My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
Please suggest me on this.
Regards,
Veera

Hi,
Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
If this master data is not used any where else just delete the master data completely with SID option.
If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
Hope this helps
Akhan.

How to Delete permanently an entry from an Infoobject - Master Data

Hi All,
I want to delete a entry = 014 in Infoobject = data provider since it is no more needed. **
When I go to this Infoobject-> Maintain master data anddelete it, a message Pop’s up
When I Check using Tcode SLG1, I see
When I check in SID table of the Infoobject, I see below.
How do I delete it? Please help.
**I need to delete it since we no more required this and we have created a new data provider (286) instead of this and the old one still appears in the reports :| with no data.

Hi,
fallow the below steps while delete the master data.
RSA1 --> find your Info object --> right click --> maintain master data
Select rows you want to delete and click 'Delete' icon. Then SAVE.
If system prompt you message "some master data cannot be deleted"
Then goto tcode SLG1 --> enter Object: RSDMD and Subobject: MD_DEL and User: your userID and press F8.
In the next screen Expand node and double click 'Problem class additional information'
This will give you which ever objects using SIDs of this master data.
You should delete this SID according to that list.
find the below doc.
http://scn.sap.com/docs/DOC-39857
Thanks,
Phani.

Unable to delete the Master Data

Hello Gurus--
How to delete the unused MD for an Infoobject,.
Unused MData were in A version in M,P and text tables.
Thru the program "RSDMD_DEL_PARALLELIZER" and "RSDMD_DEL_BACKGROUND" The MD hadn't got deleted.
Scheduled the above programs and checked the logs in SLG1 for both used and unused MD,.
The logs says that
a) Checked,.and I confirm that the unused MD is not present in any targets.
b) MD deletion hadn't happened for my unused MD.
--> The MD is in A version in the M,P, Text tables, if it is in M version these data can be deleted,,
Checked for the same in all the forums .
Couldn't able to find the same.
Very very Ungent sirs' !!!
Regards
Vishwa.

Infoobject --> right clikc --> maintain master data
Select rows u wanted to delete and click 'Delete' icon. And SAVE.
If system prompt u 'some master data cannot be deleted' .. continue with this message.
then goto tcode SLG1-- enter Object: RSDMD and Subobject: MD_DEL and User: ur userID and F8
In the next screen Expand node and dbl click 'Problem class additional information'
This will give u which ever objects using SIDs of this master data.
U should delete this SID according to that list.
Then U should delete particular data from DSO/Cubes.
Once data deleted from cube, then
Use Tcode RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Transaction Data -> Entries Not Used in the dimension of an InfoCube (Dbl Click)
From the right side window, expand u201CEntries Not Used in the Dimension of an InfoCubeu201D Node &
Enter InfoCube (like 0SD_C01), click u201CTransferu201D
Now, click u201CExecuteu201D (Toolbar)u2026 and the results displayed in the right side window..
Now, click u201CCorrect erroru201D (Toolbar)
Delecion of the master data

Master Data SID table path deleted

Similar Messages

Maybe you are looking for