Master Data synchronisation between two Solution Manager systems

Hi all,
does anyone know if it is possible to synchronise master data (smsy, ibase and such) between two Solution Manager systems with standard jobs?
Thanks!
Regards

I asked a likewise question on the OSS earlier and I was told
"Use MDM" (which is a separate product and must be licensed separately).
Markus

Similar Messages

Connect two Solution Manager systems.

Hello,
We are planning to couple two Solution Manager systems.
We want to get all the alerts ABAP+JAVA(Root Cause) from one Solution Manager to the other.
What are te steps to take?
Connect the SLD's?
Connect the systems thru RFC?
Point all the agents to the 2 Solution Manager systems?
Regards,
Mike Geluk

Hello,
It is possible.
For SLD, two options:
- Each Solution Manager can use its own SLD. Then you must define the other server in the SLD, and vice-versa.
- Each Solution manager can connect to a central SLD where the two are defined.
The rest is just like any other managed system configuration: follow the steps in solman_setup.
Best regards,
Guiilherme

Master Data synchronisation between BW and SEM BCS

Hi,
Can any one guide me how to synchronize data between BW and SEM BCS.
Master data like Cost centre, Segment, Profit centers and all other sub assignments are created in BW from source ystem i.e SAP.
Now when I upload data into BCS, i am facing errors l;ike master data doex not exists.
Currently I am Flexible upload for updating into BCS.
So pls suggest me hoe to proceed this approach in Production? IS there any synchronisation program which does this automatically from BW to BCS?
Regards,
Richard

Hi Scotsman,
The issue is, here we have created Sub Assignments, where the master data for these sub assignments will increase on daily basis.
Can say atleast 50 Sub assignmenrs are created as new master data, example: Customer is a sub assignment, but it is assigned only for few accounts, so taking sub ledgerlevel data inco is not an issue.
Now when transaction data is posted in to BCS, the sub assignments master data is created automatically.
Now the question is how to get the data in BW for the specific sub assignmnets into BCS.
Currently I planned to use the [program UCMDSYNC to do this.
Pls do suggest me if any other option available for me.
Thanks in Advance,
Richard

Automatic Master Data Maintenance in SAP Solution manager

Hello!
I am doing the settings from the "Configuration of Service Desk for VAR".
I find it difficulty "4.1 Automatic Master Data Maintenance (Standard)".
My questions:
1. Tcode SM30 -> V_AIINSNRS
http://imglink.ru/show-image.php?id=c095122ec4b0119d32ffab4675b174e7
How to insert data into a table "V_AIINSNRS"?
table V_AISAPCUSTNOS:
http://imglink.ru/show-image.php?id=f45703bd65e714ba309ecc3010fc7271
I Used report AI_SC_GET_SAP_CUSTOMER_NUMBERS.
2. I tried to run the report AI_SC_REFRESH_READ_ONLY_DATA.
http://imglink.ru/show-image.php?id=598159ed85a780096de8e5afead42095
What does this message?
Transaction SMSY_SETUP -> Expert Settings: performed
Thanks!

Hi Dmitriy,
1.
These tables are maintained by the report AI_SC_GET_SAP_CUSTOMER_NUMBERS.
Also, the report uses the S user is stored in the RFC SAP-OSS to determine all the SAP customer numbers that you support.
So, an S user from the Service Provider, with a password that has authorization to
display all customer information for the VAR customer numbers, must be available in the
RFC SAP-OSS.
For further information you can check note 1151450.
2.
To run the report AI_SC_REFRESH_READ_ONLY_DATA, you should be able to perform the above activitie first and flag customer numbers or installations for generating the data.
Best Regards,
Fernando Rocha

Configuration EWA in clien with two solution manager

Hello
I have a question I am activating EWA ¡on SOlman but I have two solman fo the same company, el first is for management r3 system and second is for management xrpm,bw,portal system.
The EWA is running in the first solman, and the saprouter I think is here too. So I want to activate the EWA in the second solman in the guide I have this note 33135 an this talks about connetion with SAP.
Is possible that the EWA in two solman for the same client.
Addionaly the Should the rscctool report run in the satellites systems too?
Thanks
DS

Hello Danny,
There should be no conflicts providing you keep a few things in mind.
On the Satellite, in SDCCN > Setting> Task>Specific> RFC Destination
Please make sure that you define one Solution Manager system as the Master. This will be the Solution Manger system that will schedule an SDCCN EarlyWatch Allert task automatically on the Satellite, throught the Maintenance Package, so it needs tol be the one specificed in the Mainatence Package task. In other words you set up the recommended EWA Activation as documented at http://service.sap.com/ewa for one Solution Manager system.
Then for additional Solutioin Manager systems you would create an SDCCN Task in the same way you would generate an ad hoc EWA report, only you would choose the RFC Destination for the second ( and/or subsequent) Solution Manager systems, and you would specify it as a periodic task so it would reschedule itself each week, so to affect automation of the sending of the SDNNC session data to the other Solution Manager Systems.
This way you will not have conflicts between the solution manager systems.
Regards,
Paul

Background job canceled in Solution Manager system

Dear all expert ,
Two background jobs canceled in solution manager system before some time.
details-
Background jobs :
                    1 - LANDSCAPE FETCH
    Program name : RSGET_SMSY
Job log : Job started
Step 001 started (program RSGET_SMSY, variant ,
The SLD server connection is inactive
Job cancelled after system exception ERROR_MESSAGE
                   2 - SEND_SYSTEM_RELATIONSHIP_TO_SUP
    Program name : AI_SC_SEND_SYSTEM_RELATIONSHIP
Job log :
                   Job started
Step 001 started (program AI_SC_SEND_SYSTEM_RELATIONSHIP, variant ,
SOL determined as monitoring Solution Manager system
SAP customer number unknown for installation number 0020606335
Job cancelled after system exception ERROR_MESSAGE
please help me , what should i do ?
I am waiting for your positive response.
Regards
Shubh

hi,
You can try following ....
For the job SEND_SYSTEM_RELATIONSHIP_TO_SUP
Program : AI_SC_SEND_SYSTEM_RELATIONSHIP
1. Up to Support Package 09:
a) Start transaction SMSY.
b) Choose Shft+F5.
c) Select the system named in the message.
d) Choose F6.
e) Select the "System Data in SAP Support Portal" tab.
f) Using the input help, fill the system number field with the correct system.
g) Save the data.
2. Up to and including Support Package 08:
a) Start transaction SOLMAN_CONNECT.
b) Select the system in question in the ID field and choose the filter pushbutton.
c) Select the system and select "Create configuration".
d) Fill the system number field using the input help with the correct system.
e) For example, select the "BW GUI Connection" service type.
f) Carry out all of the subsequent steps of the Configuration Assistant until you see the "Finish" pushbutton.
This establishes a unique relationship between your system in the Solution Manager and the system number in the SAP Support Portal. Problems no longer occur with this system when the SEND_SYSTEM_RELATIONSHIP_TO_SUPP job is next run. However, the problem may still exist for other systems (in these cases, you should follow the same steps).
Hope this will help to solve your issue..
Regards
Bhuban
RKFL

Solution manager system log - strange entries

Hi Everyone,
the problem we are facing in Solution Manager system log every five minutes appears a new error message:
2 Database error -30082 at CON
0 > SQL30082N Security processing failed with reason "24"
0 > ("USERNAME AND/OR PASSWORD INVALID"). SQLSTATE=08001
First of all the landscape: ECC, BI, CRM, PI and Solman. Each system is DEV, QUA, PRD - except Solution Manager.
Result of going to see the logs within work directory:
Connect to %_DCR_XXXXX as db2dcr with DB6_DB_NAME=DCR;DB6_DB_HOST=xxxxxx;DB6_DB_SCHEMA=SAPSR3;DB6_DB_SVCENAME=5912
C *** ERROR in DB6Connect[dbdb6.c, 1727] CON = 1 (BEGIN)
C &+***      DbSlConnectDB6( SQLDriverConnect ): [IBM][CLI Driver] SQL30082N Security processing failed with reason "24" ("USE
C &+***      RNAME AND/OR PASSWORD INVALID"). SQLSTATE=08001
C &+***
C &+***
C &+***      ABAP location info 'CL_SQL_CONNECTION=============CP', 337
C &+***
C *** ERROR in DB6Connect[dbdb6.c, 1727] (END)
C *** ERROR => DbSlConnect to 'DCR' as 'db2dcr' failed
[dbdb6.c      1732]
Some of the systems are being connected successfully and the error messages in SM21 are not related to those systems. But some of the systems like DCR cannot be reached. And this fact causing the error messages.
I haven't configured Solution Manager because I have joined the project later. I would like to know what job is trying to access the satellite system and for what purpose.
On solution manager side I have checked all the scheduled background jobs - all of them have been executed successfully.
There some of them are scheduled but it is hard understand what is purpose of the job.
I have checked and corrected system landscape through SMSY and have maintained all the RFCs. They all OK now.
What else could force to make a connection to satellite system? And where is the place where it is hardcoded local(satellite) db2 connection entry?
Like I said before, some of the systems are being connected but some not. The one which has not been connected - there was recently changed SAP master password. I believe this is the key to resolve the problem. But the system itself operating 100% correctly.
Perhaps it could be CCMS that makes some extra connections to collect the data from the monitored systems. But I have checked all the RFC's in SM59 and they were OK.
Any ideas or suggestions would be appreciated.
Thanks in advance,
Kind regards,
Artjom.

Kaustubh Krishna,
thank you for respond.
It was dbacockpit. The connection was maintained with old db2sid password. And it was causing problematic log entries.
Problem was solved.
Points awarded.
Thanks,
kind regards,
Artyom

Quality Center Adapter - Connecting Multiple Solution Manager Systems

We are running Solution Manager 7/Enhp 1 and Quality Center 10 successfully using the Quality Center Adapter integration. My question is, can we connect multiple Solution Manager systems (i.e. SMP/SMS/SMX) to a single Quality Center server simultaneously? Or is there a one-to-one relationship restriction. Thanks.

I have answered this question in this post below:
http://forums.sdn.sap.com/thread.jspa?threadID=2110531&messageID=10962875#10962875
To quote myself
Each tie up is based on the logical ports at the Solution Manager end and the relationship between the two entities is between Projects. So if you set up the configuration like you would in a normal scenario and at the right moment, connect the projects in SolMans to the corresponding projects in HPQC, you should be fine.
Hope that helps.

Syncronizing two Solutions Manager with One SLD

Hello Experts, we have this issue: I am having one Central SLD in PI and one productive Solution Manager (new one) that is pointing to that SLD, for incidents we are managing another ¨productive¨Solution Manager (old one) . There is a new system that I need it in my SMSY in my old Solution Manager and the best way to do it would be to point that old Solman to the same SLD that the new one is pointing. my question is: I only have to set the SLD in the old solution manager in the RZ70 and add that Solution Manager in the Central SLD?, so I would end with two solution manager pointing the same Central SLD, it doesnt mess with my new productive Solution Manager SMSY?, I want to be sure that some trash data in the old Solution Manager wont be present in the new Solman that is pointing the Central SLD right now.
Best Regards,
Paul

Dear Mr. Paul,
There are few things to understand:
1. RZ70 is used to feed SLD with system information.
2. landscape fetch job need to be scheduled within Solution manager system to update SMSY with the latest information available in SLD which you have configured during SOLMAN_SETUP.
Here with your description it is clear that you have central SLD at your PI system and your both Solution manager system ( New and Old) are connected to the central SLD.
Here what I understand if you want to add a new system say X in SMSY of your old solution manager.
In order to do so you need to configure your new system to the central SLD using RZ70. Once you did this, system details of your new system would be available with central SLD.
Now in next step to make that system available to your old solution manager, you need to rerun the smsy_setup job. This will referesh your SMSY and new system would be available in SMSY of your OLD solution manager.
In this case there is a catch. Since you have added the system to the central SLD, the new system X would also appears in the SMSY of your new Solution Manager as well once SMSY of new solman gets refreshed.
So if you just want to add this new system X to SMSY of your old solution manager only and not to the new one, you can add this system to the local SLD of old solution manager only not to the central SLD.
Also you need not to worry about the trash data available in your Old solution manager. It would not effect the central SLD if your local SLD of old solution manager is not synch with central SLD.
Regards,
Sachin

Define Service Desk Destination in the Solution Manager System (Dump creen)

hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors         SAPSQL_EMPTY_TABNAME
Except.                CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time          13.07.2008 14:05:57
Short text
    A dynamically specified FROM clause has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSHI2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
     caught in
    procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The running ABAP program attempted to execute an Open SQL statement in
    which a FROM clause was specified dynamically in the field "TABLE_NAME". In
     this
    FROM clause, either a table name after a join operator is missing, or an
     alias name after the key name "AS". The field "TABLE_NAME" could be empty as
    well.
regards

Hi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks.

EWA: error message in CRM check for SAP Solution Manager system

Hello!
In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
Queue Name                                Status     Date of first entry             Entries
CSABUPA0000000070           READY     03.12.2007                          45
CSABUPA0000000934           READY     07.05.2008                          45
CSAIBASE0000000000           READY     23.11.2007                          36
CSA_ORDER_8000000000      READY     22.11.2007     5
CSA_ORDER_8000000001      READY     22.11.2007     3
and others.
I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AM

Hi,
Usually problems with hanaging CSA* queues are caused because too many
indiviaual queues are created for the qRFC resources to handle. You can
limit the number of queues as described in note 763680.
Note 763680 would be useful if all of your qRFC resourcesa are in use
when you have a great number of queues. With a large number of dialog
WPs on the system it would probably make sense to reduce the amount
as described in the note.
the casue when you have this problem would be to check SMQR -> GOTO ->
qRFC resources. You can also see if most of your dailog WPs are in use
in SM50.
Also refer to note 758677.
Please schedule report RSQIWKEX (Inbound) to run as described in the
note.
And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
When you replicate lots of data from CRM to R/3, there could be a qRFC
resource problem. In this case, the numebr of queues created can be
reduced by implementing the attached note 356228, particularly solution
2.
For CSA* queues is slightly different from the one decribed in note;
this is because the CSA queues exchange data within the CRM system.
The steps described should be followed, except that table SMOFQFIND
must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
respectively. It should be possible to follow the solution 2 in the
note as long as you use SMOFQFIND instead of CRMQNAMES.
Hope this helps
Cheers,
SH

How to integrate Solution Manager system to Enterprise Portal

Hi all,
HOW TO INTEGRATE SOLUTION MANAGER SYSTEM TO ENTERPRISE PORTAL SYSTEM

Hi,
First establish SSO between portal and solution manager.
make the iview from com.sap.portal.epsolman.EPSolman
check the link for help
ep and solution manager support desk
Thanks
Santosh

Data mismatch between two clients

Hi,
I have a query on data mismatch between two clients.
For eg assume a functional consultant would have configured intially some 5 custom document types and captured that in a transport request (TR1234) and promoted from one system/client (in my case QG1/821) to another system/client (say QG4/821). Again he would have configured another 3 custom document types and put in a transport request (TR4567) and promoted it. The transport request TR4567 some how did not reach QG4/821. Hence it shows only 5 records in T003 table (document types table) in QG4/821 and 8 records in QG1/821. How do we identify which is the correct transport (in this case TR4567), so that this transport can be promoted to QG4/821, so that both QG1/821 and QG4/821 are in sync.
Similary such a discrepancy exists for custom tables also. I am not able to catch hold of any basis people for inputs on this. Hence pls advise.
Regards
Vimal Kumar

development objects can be compared using, Compare the active versions in both the system. (Use remote comparision)
But this you have to maually check.

Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller

Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?

Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Error in RFC & to Solution Manager System

Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinder

FYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul

Master Data synchronisation between two Solution Manager systems

Similar Messages

Maybe you are looking for