Master data table for 0notificatn

Hi guys,
What is the name of the master data table for Notification in R3. We are having certain unexpected attribute value for 0notificatn and thought will check in r3.

Hi Zubin,
Try to check table QMEL or table vision BIW_QMEL (where the extractor gets the information).
Kind regards,

Similar Messages

What are the master data tables for 'Plant'?

Hi friends,
What are the master data tables for 'Plant' that contain below data?:
PLANT
NAME1
NAME2
LANGUAGE
HOUSE_NUM_STREET
PO_BOX
POSTAL_CODE
CITY
COUNTRY_KEY
REGION
COUNTRY_CODE
CITY_CODE
TIME_ZONE
TAX_JURISDICTION
FACTORY_CALENDAR
Thanks a lot!

Hi,
Plz try out following tables for your requirement.
TOO1W
ADRC
J_1IMOCOMP
T001W : werks TYPE t001w-werks, "PLANT
        name1 TYPE t001w-name1, "PLANT DESCRIPTION
        adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
ADRC: addrnumber TYPE adrc-addrnumber, "ADDRESS NUMBER
         str_suppl1 TYPE adrc-str_suppl1, "STREET2
         str_suppl2 TYPE adrc-str_suppl2, "STREET3
         street TYPE adrc-street,          "STREET
         city1 TYPE adrc-city1,            "CITY
         post_code1 TYPE adrc-post_code1, "CITY POSTAL CODE
         post_code2 TYPE adrc-post_code2, "PO Box postal code
         tel_number TYPE adrc-tel_number, "TELEPHONE NUMBER
         fax_number TYPE adrc-fax_number, "FAX NUMBER
         str_suppl3 TYPE adrc-str_suppl3, "STREET4
         location TYPE adrc-location,      "STREET5
         city2 TYPE adrc-city2,
For Tax Details :
J_1IMOCOMP :   werks TYPE j_1imocomp-werks,
                          j_1icstno TYPE j_1imocomp-j_1icstno,
                          j_1ilstno TYPE j_1imocomp-j_1ilstno,
Hope this will help.
Regards,
Archana

Combination exists in Master Data Table, but error occurs in layout

Hi,
We are getting an error in planning layouts that state that a combination of Cost Center and Profit Center is not included in master data table for characteristic. I looked at note 1222910 that apparently fixes this issue, but we are on SP21 and the note was included in SP19.
Any suggestions?
Br,
Sonni

Hi there,
That seems an issue throwed by the characteristic relationships.
Are you sure the profit center/cost center issued in the message exist in the master data?
It seems some how you're getting that combination of that profit center/cost center in the planning layout and the charateristic relationship is validating that.
See if you query has the valid combinations for the profit centers/cost centers in the filter and/or variables.
Diogo.

Join between fact table and master data table

Is it posible to join a Cube with a Characteristic? This is exactly what i need:
- In my cube i have date (0CALDAY) and (among others) a characteristic (ZCHAR) and a key figure (ZKEYF).
- I added a key figure (ZKFAT) as an attribute to ZCHAR. So the tables look something like this:
Fact table:
0CALDAY | ZCHAR | ZKEYF
12.10.2006 | CHAR1 | 10
12.10.2006 | CHAR2 | 20
12.10.2006 | CHAR3 | 30
Master data table for ZCHAR:
ZCHAR | ZKFAT
CHAR1 | 1000
CHAR2 | 2000
CHAR3 | 1500
I need to make a query with a table that looks like this:
0CALDAY | ZCHAR | ZKEYF | ZKFAT
12.10.2006 | CHAR1 | 10 | 1000
12.10.2006 | CHAR2 | 20 | 2000
12.10.2006 | CHAR3 | 30 | 1500
Finally, the query should result in something like this:
0CALDAY | ZKEYF | ZKFAT
12.10.2006 | 10 | 1000
12.10.2006 | 20 | 2000
12.10.2006 | 30 | 1500
Adding KFAT to the fact table is not an option, i need to read this information directly from ZCHAR.
I've tried using MultiProviders but didn't get the result i need.
Is there any way to achieve this? Please advice.
Thank you,

Thank you Ram C. i've tried your solution and it may be it, but i'm having one problem:
Since i'm reporting in web, i used the second solution you offered and almost got the desiered result. The problem is that some entries are correct but others ar duplicated! Using same example, my result table looks something like this:
0CALDAY | ZKEYF | Calculated KF (from ZKFAT)
12.10.2006 | 10 | 1000
12.10.2006 | 20 | 4000
12.10.2006 | 30 | 1500
Second row should be 2000, but instead it shows 4000. I added ZCHAR's attribute ZKFAT as a display attribute in order to compare the results. I found that the display attribute is correct (2000) but the Calculated KF still showed duplicated data (4000).
By the way, when i execute the query, i get this warning message:
"Calculated key figure ZRT_C02_2_CKF004 is not defined correctly"
Any ideas why this could be happening?
Thank you for your help.
Message was edited by: Gerardo Gaona

Master data tables with unwanted records from transaction data upload

Hi Friends,
I have a master data table for infoobject 'C' with compounding characteristics 'A' & 'B'. I upload this master data with values given below:
 A, B, C, Short text, Long text
 P, 10, BBB, Apple, Big Apples
 Q, 20 , XYZ , Tomatoes , Red Tomatoes
When I load data into ODS from a source system, I may not necessarily have data for all these 3 fields in these transaction record. Example:
 A, B, C, D, E
 P -1 FFF 20 30
 Q 10 GGG 10 40
 The problem is when I upload the above transaction data, it populates the master data table too with these two new records 1 -1 FFF and 2 10 GGG, which I would like to avoid.
 Is there any way?
 Will assign full points to anyone who helps me here.
 Thanks,
 JB

Hi JB,
If you want to load transactional data and still want to prevent the population of the master data table, I don't think it is possible, as it is goes aginst the data consistency in the warehouse.
However, if you can afford not to load transactional data for such cases, you can activate referential integrity check for the infoobject C. Then neither transactional data nor masterdata enter the datawarehouse until you maintain masterdata yourself for the infoobject C.
hope this helps.

Changing Master data table keys

Hello,
I have a custom extractor (built by someone else)on R/3 that gets data from table HRP1001. This extractor contains data I need to implement "job relationships" for HR in BW.
I am trying to extract the data into a master data object on BW. One job in the HRP1001 table (OBJID on R/3) can have multiple relationships (or object types, OTYPE on R/3). However, since the key of the master data for 0JOB is just JOB, OBJVERS, and DATETO (and does not include OTYPE), the load fails due to duplicate records.
Since to modify the master data table for 0JOB would be an SAP mod, I created my own "Z" object from 0JOB. I have been manipulating the /BIC/M, /BIC/P and BIC/Q tables to try to adjust the key to include at least the OTYPE. I can successfully change the key of the Z object's master data to appear as I want it, but the new objects I added as keys are "flagged" after the load fails due to duplicate records. (Checks of each /BIC table are okay and activated changes. Also performed SE14 adjustment of each table)
So my questions are 1) does anyone know of a business content item that for storing this type of data that I have missed? and 2) If not, can anyone recommend how I can correctly modify the key fields of a master data object?
Any assistance is greatly appreciated.
Thank you,
Kelley

Hello Kelley,
If you want to enhance the key of your master data table, include the infoobject in compounding. All the infoobjects included in compounding will be included in the key of master data table.
Hope it helps.
Regards,
Praveen

How to View master data & Trasaction data tables for Puchasing Cube

Hi BW masters,
How should I check which tables (Master data tables and Transaction data tables) are involved with Business Content Cube(Purchasing data 0PUR_C01). I would like to know this information in order to go to that table and browse the data in that table. Where should we go and check this out.
I will reward the points for the good answers.:-)
Thanks
Syed.

hi Syed,
to view tables' content you can use SE16,
you can try infocube name, dimension tables of cube are store in *d[infocube name]1 to F, fact tables are f[infocube name] and e[infocube name]-compress,
infocube data are stored in star schema, you can use LISTCUBE to view the content (to see the structure/tables in cube, use LISTSCHEMA),
master data (not time-dependent) are stored in text table t[infoobject name], attribute - p[infoobject name] and hierarchy - h[infoobject name],
take a look bw multidimensional data modeling for detail
http://help.sap.com/bp_biv235/BI_EN/documentation/Multi-dimensional_modeling_EN.doc
hope this helps.

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

Abap code not working - deleting based on master data table information

Hi,
I wrote a piece of code earlier which is working and during test we found out that it will be hard for the support guys to maintain because it was hard coded and there is possibility that users will include more code nums in the future
sample code
DELETE it_source WHERE /M/SOURCE EQ 'USA' AND
/M/CODENUM NE '0999' AND
/MCODENUM NE '0888' AND.
Now I created a new InfoObject master data so that the support people can maintain the source and code number manually.
master data table - the codenum is the key.
XCODENUM    XSOURCE
0999               IND01
0888               IND01
now I wrote this routine all the data gets deleted.
tables /M/PGICTABLE.
Data tab like /M/PGICTABLE occurs 0 with header line.
Select * from /M/PGICTABLE into table tab where objvers = 'A'.
if sy-subrc = 0.
LOOP at tab.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM NE tab-XCODENUM.
ENDLOOP.
Endif.
But when I chage the sign to EQ, I get opposite values , Not what I require.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM EQ tab-XCODENUM.
Cube table that I want to extract from
/M/SOURCE                             /M/CODENUM
IND01                                       0999
IND01                                       0888
IND01                                       0555
IND01                                       0444
FRF01                                      0111
I want to only the rows where the /M/CODENUM = 0999 and 0888 and i would also need FRF101
and the rows in bold should be deleted.
thanks
Edited by: Bhat Vaidya on Jun 17, 2010 12:38 PM

It's obvious why it deletes all the records. Debug & get your answer i wont spoon feed
Anyways on to achieve your requirement try this code:
DATA:
      r_srce TYPE RANGE OF char5, "Range Table for Source
      s_srce LIKE LINE OF r_srce,
      r_code TYPE RANGE OF numc04,"Range table for Code
      s_code LIKE LINE OF r_code.
s_srce-sign = s_code-sign = 'I'.
s_srce-option = s_code-option = 'EQ'.
* Populate the range tables using /M/PGICTABLE
LOOP AT itab INTO wa.
s_code-low = wa1-code.
s_srce-low = wa1-srce.
APPEND: s_code TO r_code,
          s_srce TO r_srce.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM:
r_code COMPARING ALL FIELDS,
r_srce COMPARING ALL FIELDS.
* Delete from Cube
DELETE it_source WHERE srce IN r_srce AND code IN r_code.

M or P master data table to be used in routine read statement

Hi
I update of a DSO i had a requirment for a routine to get the Attribute of a Infoobject.
So which master data table M or P table i need to use in my read statement and why
Thanks

Use M table as it it the view on time dependent(P table) and time independent(Q table) tables.
M table is view on time dependent and time independent attributes, you can see characteristic values and all the attributes for the Characteristic.
The tables that go in the view are the Master Data Table and the Time-Dependent Master Data Table. If the characteristic only has time-dependent attributes, only the time-dependent master data table goes in. If the characteristic has only non-time-dependent attributes, only the master data table goes in.

Which master data table to be used to get attribute value

Hi all,
I am writing routine in update rule to get data for one master data attribute of master data 0customer.
But I am cofused in choosing master data table to get data.
There are two master data table in master data tab of 0customer characteristics.
1. View of MstrDtaTbls :- /BI0/MCUSTOMER
2. Master data tab :- /BI0/PCUSTOMER
Suggest me which one to take .
Although I have tried with 2 one and it is working fine.

Hi,
If the attribute is not time-dependent please use /BI0/PCUSTOMER, else use /BIC/QRCOSTCTR.
Just remember P table and Q table.
Regards,
Frank

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

How to create time dependant master data table in R/3?

Hi gurus,
I am new to BW.I try to execute the 'Time dependant Attribute' into BW.in my scenario my source system must give me the data like "salesrep ID,Manager ID,Date to,Date from,Sales region". I like to know how to define this master data in SAP R/3(Source system)?. Give me the steps to create master data table in R/3.
Manager may change periodically.even i need to maintain all the changes in R/3.
Thanks & Regards,
Bharath

built-in type method means.,
there is no need to create data element and domain objects seperately for each and every field of the table which ever you are creating, system will implicitly fix the size based on the data type you selected....

Insert data in a user master data Table

Hi every body,
I've created a User Master data table named 'MyTable'. i want to add data to this table but there is an error which occur : 'to generate this. First Define the Numbering Series in the Administration Module'. I want to add data to this table using C# code, without using UDO.
Is it possible?
Thank you for helping me
Haifa

Hi,
thank you for your answer.
I didn't understand very well, i will ask the question in an other way.
it is possible to insert records in a master data table by using the code C#
I mean :
            usertable = _Company.UserTables.Item(tablename);
            usertable.Code = code;
            usertable.Name = name;
            usertable.UserFields.Fields.Item("U_ContCode").Value = ContCode;
            usertable.UserFields.Fields.Item("U_CardCode").Value = CardCode;
            lRetCode = usertable.Add();
without encountering the problem of numbering series.
Haifa

Customer master data table KNVV is missing

Hi All
I a trying to cancel the billing document using transaction VF11. System shows error as " customer XYZ customer master data table KNVV is missing"
Please advice how to proceed?
Thanks and regards
satyaprasad

Hi,
Goto the T.Code "Se11/SE16".
Enter the table name as "VBRK".
Enter your invoice number.Execute.
Check the value of "VKORG(Sales Organisation)","VTWEG(Distribution Channel)" and "SPART(Division)".
Or you check the same in "VF03" screen also.
Make a copy of the above three fields.
Goto the T.Code "Se11/SE16".
Enter the table name as "KNVV".Enter your customer number in "KUNNR" and the values of "Sales organisation,Distribution channel and division" into their respective fields.Execute.
Check if there are any entries.The result should be no entries so that only you will receive this error message.
If you created the customer with out sales area,while creating the order only it will give you an error message as "No customer master record exists for sold-to party XXXXXXX
Message no. VP199".
As the partners are defined in sales area data only.
Regards,
Krishna.

Master data table for 0notificatn

Similar Messages

Maybe you are looking for