Master data tables and Transaction data Tables
Hello Gurus,
Please let me know how to know which table belongs to master data and which table belongs to transaction data.
for FICO module.
Does any one have specific material relating to master data table and transaction data tables.
Thanks
Edited by: Manu Rathore on Jan 18, 2012 4:38 AM
Hi Manu,
Find attached table relation diagram by Christopher Solomon. It is one of the very comprehensive chart on this topic.
deleted
Warm regards,
Murukan Arunachalam
Similar Messages
-
Set up table and transaction data delta load init
Dear experts,
I am following a document left by my predecessor on "post processing activities" for BI prod post go-live.
And for transaction data it says to :
1. execute init with data transfer infopack manually
2. execute delta update infopack manually
3. go to ECC : delete setup data (lbwg)
4. setup the tables for (OLIxxBW)
5. then finally activate Process chains.
Is this sequence correct?
Shouldn't I first delete the setup table, setup the tables and then execute the infopackages??
Regards,
AliceHi,
The sequence is correct ,and after this you need to run the job for the collective run in SAP ,which is based on your delta queue.
i.e if you choose direct delta it is not required ,but if you use 'queued delta' then you need to run the collective run to move the delta from the extraction queue to delta queue .This job should run before the delta load.
It is better to fill the set-up table during downtime .ie.no documents posted during the set-up table run. But if you dont have an option you can fill the set-up table during operation hours ,but need fo follow certain steps to get all the delta data. You may need to use 'Init without delta transfer' or early delta initialization in the infopackage .You need ODS as a data target to achieve this . Please search SDN ,you will get more information about this.
Thanks. -
Data (Master Data Changes and Transaction Data) from SAP BW to SAP BPC 5.1
Hi guys
I have seen posts on this forum describing data transfers from SAP R/3 to SAP BPC. I assume the procedure for data transfers from SAP BW to SAP BPC 5.1 should be the same i.e. using SSIS packages.
However I have some unique requirements -
1. DATA AT DIFFERENT AGGREGATED LEVELS - I need data from SAP BW at different levels - Some data comes at Product level while other at Customer level and some at Project Level. The current procedure takes BW queries output in excel sheets (6 files) and then use the data manager package to load the data in SAP BPC 5.1 using appropriate transformation and conversion files. This procedure is highly manual and I am looking at using SSIS package to do this. However, because of having data at different levels, it becomes a little tricky. How can we achieve this using SSIS?
2. UPDATING MASTER DATA - I need to update the master data (dimension members) in SAP BPC 5.1 at the start of every month. The current procedure compares (in MS ACCESS) the data from the queries mentioned in 1 to the dimension members in SAP BPC 5.1 and spits a file with the new entries which needs to be manually updated in the appropriate dimensions using Admin Console. I am looking at automating this task. I cannot just replace all the contents of a dimension with the members coming from SAP BW since the dimension members contains some dummy members which are used for planning.
3. HIERARCHY CHANGES - What is the best way to capture the hierarchy changes in SAP BW into SAP BPC 5.1?
Please advise.
Thanks,
Ameya KulkarniHi Ameya,
how did you solve the described problems? Can you give some hints about uploading master data and updating the hierarchy?
BR, André -
Relation between master and transaction data
Hi experts,
I have a basic question how the relation between masterdata and transction data is maintained in R/3. As I know first we extract master data and later transaction data in a typical R/3 based scenario.
1.How does BW knows that , the transaction data are related masterdata in the same sense as in R/3 ?
I am involved in an enhancement of R/3 extractor. I need to derive 3 more fields and map it to info objects in BW. Cld any one explain me ( with an example plz) how these alignments to be made. How can I establish relation b/w derived fields and transaction data during extractions ?
regs
D BretHi Dave.
Let's see if I can get all of your questions answered. First, when Transactional Data is loaded, BW checks to see if a SID exists for each characterisatic field & value in the load. If one doesn't, it either creates a SID (Surregate ID) in the master data tables (default action) or the load fails (if the enforece referential intgegrity flag is set). It's better to load master data first in either case as it will improve the performance of the transactional load.
In terms of R/3, the data has similar relationships as in BW. There are master data tables and transactional data tables. The difference is that while R/3 uses ~1 master data table per field, BW uses more. Same thing for transactional data.
As for your enhancement, if everything you need for the derivation of the extra field is in R/3, then you can enhance the extractor in RSA6 and do the mapping in R/3. Once you replicate the DataSource to BW and reconnect the transformation & update rules, the load should work. If you can give a bit more information on what sort of enhancement you are attempting, I can give a better example.
Cheers,
Adam -
Historical and transaction data in the same tables creates perf problems
Our Oracle based application is slow partly due to the fact that historical data are kept in the same table as transactional data. For example records about deceased patients, patients treated 5 years ago...etc, are kept in the one and only one patient table, which is needed to run the daily process of the hospital. So gradually all our major tables PATIENTS, CHARTS, NAMES, APPOINTMENTS have grown very large and since most of our SQL join all these tables at the same time, then all screens and reports run very slowly. I have introduced the idea that we should split all these tables in two: historical PATIENTS data, and CURRENT PATIENTS data...the same with all the others. A nice system would first search in the smaller transactional tables, which would run faster being smaller, and if no data found, then fallback to the historical tables. But this would require programming. From what I have read mateialized view could solve part of our problem. We could have views containing for example only one year worth of the data, and I guess any changes could be later replicated in the base table. What I dont know is what to do if we cannot find the patient in the matealized views ? Do I need to fallback to another SQL which will search in the initial base tables ? Anyway we can implement this without programming ? Tx.
Appointment table: 207,470
Visit table: 5,890,920
Patient table: 2,993,129
Chart table: 2,864,069
Patient names table: 3,938,118
SELECT
APPOI_OR_VISIT,
VISIT_SEQ,
PAT_SEQ,
INST_CODE,
INST_CODE_DISPL,
INST_DESC,
CLINIC_CODE,
CLINIC_CODE_DISPL,
CLINIC_DESC,
SPEC_CODE,
SPEC_CODE_DISPL,
SPEC_DESC,
VISIT_DATE,
VISIT_TIME,
VISIT_TIME_ARRIVAL,
APPTYPE_CODE,
SESSION_DOM_MODE,
PRESTYPE_CODE,
PRESTYPE_DOM_TYPE,
DIA_CODE,
VISIT_TIME_START_RESP,
VISIT_TIME_DISCHARGE,
APPOI_NB_DURATION,
VISIT_TX_REASON,
VISIT_TX_COMMENT,
EXTDOC_CODE,
VISIT_PN_REFPHYS_NAME,
PATYPE_CODE,
PAYRESP_CODE,
VISIT_IND_GROUP,
VISIT_PCODE,
VISIT_IND_COMPLETE,
VISIT_IND_ADMISSION,
VISIT_IND_CONFIDENTIALITY,
VISIT_DATE_ACCIDENT,
APPOI_SEQ,
BILLING_CODE,
VISIT_TX_DIAGNOSIS,
CST_CODE_1,
CST_CODE_2,
CST_CODE_3,
APPOI_DH_CRE,
APPOI_CODE_CRE_USER,
APPOI_DH_MOD,
APPOI_CODE_MOD_USER,
VISIT_CODE_CRE_USER,
VISIT_DH_CRE,
VISIT_UPDATED_COUNT,
VISIT_CODE_MOD_USER,
VISIT_DH_MOD,
APPOI_PAYRESP_CODE,
APPOI_DT_ACCIDENT,
PATIENT_LAST_NAME,
PATIENT_FIRST_NAME,
PATIENT_CONFIDENTIALITY,
PATIENT_CHART_EXT,
TO_NUMBER(SUBSTR(PATIENT_CHART_EXT, 1, INSTR(PATIENT_CHART_EXT, '|')-1)) AS PATIENT_CHART_NO,
PAT_IND_SPECIAL_RISK
FROM
SELECT
'VISIT' AS APPOI_OR_VISIT,
VISIT.VISIT_SEQ,
VISIT.PAT_SEQ,
INSTITUTION.INST_CODE,
INSTITUTION.INST_CODE_DISPL,
INSTITUTION.INST_DESC,
CLINIC.CLINIC_CODE,
CLINIC.CLINIC_CODE_DISPL,
CLINIC.CLINIC_DESC,
SPECIALTY.SPEC_CODE,
SPECIALTY.SPEC_CODE_DISPL,
SPECIALTY.SPEC_DESC,
VISIT.VISIT_DATE,
VISIT.VISIT_TIME,
VISIT.VISIT_TIME_ARRIVAL,
VISIT.APPTYPE_CODE,
VISIT.SESSION_DOM_MODE,
VISIT.PRESTYPE_CODE,
VISIT.PRESTYPE_DOM_TYPE,
VISIT.DIA_CODE,
VISIT.VISIT_TIME_START_RESP,
VISIT.VISIT_TIME_DISCHARGE,
VISIT.APPOI_NB_DURATION,
VISIT.VISIT_TX_REASON,
VISIT.VISIT_TX_COMMENT,
VISIT.EXTDOC_CODE,
VISIT.VISIT_PN_REFPHYS_NAME,
VISIT.PATYPE_CODE,
VISIT.PAYRESP_CODE,
VISIT.VISIT_IND_GROUP,
VISIT.VISIT_PCODE,
VISIT.VISIT_IND_COMPLETE,
VISIT.VISIT_IND_ADMISSION,
VISIT.VISIT_IND_CONFIDENTIALITY,
VISIT.VISIT_DATE_ACCIDENT,
VISIT.APPOI_SEQ,
VISIT.BILLING_CODE,
VISIT.VISIT_TX_DIAGNOSIS,
VISIT.CST_CODE_1,
VISIT.CST_CODE_2,
VISIT.CST_CODE_3,
VISIT.APPOI_DH_CRE,
VISIT.APPOI_CODE_CRE_USER,
VISIT.APPOI_DH_MOD,
VISIT.APPOI_CODE_MOD_USER,
VISIT.VISIT_CODE_CRE_USER,
VISIT.VISIT_DH_CRE,
VISIT.VISIT_UPDATED_COUNT,
VISIT.VISIT_CODE_MOD_USER,
VISIT.VISIT_DH_MOD,
NULL AS APPOI_PAYRESP_CODE,
TO_DATE(NULL) AS APPOI_DT_ACCIDENT,
NAME.NAM_PN_NAM AS PATIENT_LAST_NAME,
NAME.NAM_PN_FNAM AS PATIENT_FIRST_NAME,
CONFIDENTIALITY.CONF_DESC AS PATIENT_CONFIDENTIALITY,
PI_SECURITY.F_GET_CHART_NUMBER_SCAN_CODE(VISIT.PAT_SEQ, 103 /*:pChartInstitutionID*/, 0) AS PATIENT_CHART_EXT,
PATIENT.PAT_IND_SPECIAL_RISK
FROM
AS_T_VISITS VISIT,
CT_R_INSTITUTIONS INSTITUTION,
AS_T_CLINICS CLINIC,
CT_R_SPECIALITIES SPECIALTY,
PI_T_NAMES NAME,
PI_T_PATIENTS PATIENT,
PI_R_CONF_LEVELS CONFIDENTIALITY
WHERE
VISIT_DATE >= TO_DATE('2004-04-01', 'YYYY-MM-DD') /*:P_VISIT_DATE_FROM*/ AND
VISIT_DATE <= TO_DATE('2004-04-02', 'YYYY-MM-DD') /*::P_VISIT_DATE_TO*/ AND
CLINIC.CLINIC_CODE = VISIT.CLINIC_CODE AND
SPECIALTY.SPEC_CODE = CLINIC.SPEC_CODE AND
INSTITUTION.INST_CODE(+) = VISIT.INST_CODE AND
NAME.PAT_SEQ = VISIT.PAT_SEQ AND
NAME.NAMTYP_CODE = 1 AND
PATIENT.PAT_SEQ = VISIT.PAT_SEQ AND
CONFIDENTIALITY.CONF_CODE (+) = PATIENT.CONF_CODE
UNION
SELECT
'APPOI' AS APPOI_OR_VISIT,
0 AS VISIT_SEQ,
NVL(APPOINTMENT_GROUP.PAT_SEQ, APPOINTMENT.PAT_SEQ) AS PAT_SEQ,
INSTITUTION.INST_CODE,
INSTITUTION.INST_CODE_DISPL,
INSTITUTION.INST_DESC,
CLINIC.CLINIC_CODE,
CLINIC.CLINIC_CODE_DISPL,
CLINIC.CLINIC_DESC,
SPECIALTY.SPEC_CODE,
SPECIALTY.SPEC_CODE_DISPL,
SPECIALTY.SPEC_DESC,
APPOINTMENT.SESSION_DATE AS VISIT_DATE,
APPOINTMENT.APPOI_TIME AS VISIT_TIME,
'' AS VISIT_TIME_ARRIVAL,
APPOINTMENT.APPTYPE_CODE,
APPOINTMENT.SESSION_DOM_MODE,
0 AS PRESTYPE_CODE,
'' AS PRESTYPE_DOM_TYPE,
0 AS DIA_CODE,
'' AS VISIT_TIME_START_RESP,
'' AS VISIT_TIME_DISCHARGE,
APPOINTMENT.APPOI_NB_DURATION,
APPOINTMENT.APPOI_TX_REASON AS VISIT_TX_REASON,
APPOINTMENT.APPOI_TX_COMMENT AS VISIT_TX_COMMENT,
APPOINTMENT.EXTDOC_CODE,
APPOINTMENT.APPOI_PN_REFPHYS_NAME AS VISIT_PN_REFPHYS_NAME,
APPOINTMENT_TYPE.PATYPE_CODE AS PATYPE_CODE,
0 AS PAYRESP_CODE,
DECODE(APPOINTMENT_GROUP.PAT_SEQ,NULL,0,1) AS VISIT_IND_GROUP,
'' AS VISIT_PCODE,
0 AS VISIT_IND_COMPLETE,
0 AS VISIT_IND_ADMISSION,
APPOINTMENT.APPOI_IND_CONFIDENTIALITY AS VISIT_IND_CONFIDENTIALITY,
TO_DATE(NULL) AS VISIT_DATE_ACCIDENT,
APPOINTMENT.APPOI_SEQ,
0 AS BILLING_CODE,
'' AS VISIT_TX_DIAGNOSIS,
0 AS CST_CODE_1,
0 AS CST_CODE_2,
0 AS CST_CODE_3,
APPOINTMENT.APPOI_DH_CRE AS APPOI_DH_CRE,
APPOINTMENT.APPOI_CODE_CRE_USER AS APPOI_CODE_CRE_USER,
APPOINTMENT.APPOI_DH_MOD AS APPOI_DH_MOD,
APPOINTMENT.APPOI_CODE_MOD_USER AS APPOI_CODE_MOD_USER,
'' AS VISIT_CODE_CRE_USER,
SYSDATE AS VISIT_DH_CRE,
0 AS VISIT_UPDATED_COUNT,
'' AS VISIT_CODE_MOD_USER,
SYSDATE AS VISIT_DH_MOD,
PAYRESP_CODE AS APPOI_PAYRESP_CODE,
APPOI_DT_ACCIDENT,
NAME.NAM_PN_NAM AS PATIENT_LAST_NAME,
NAME.NAM_PN_FNAM AS PATIENT_FIRST_NAME,
CONFIDENTIALITY.CONF_DESC AS PATIENT_CONFIDENTIALITY,
PI_SECURITY.F_GET_CHART_NUMBER_SCAN_CODE(APPOINTMENT.PAT_SEQ, 103 /*:pChartInstitutionID*/, 0) AS PATIENT_CHART_EXT,
PATIENT.PAT_IND_SPECIAL_RISK
FROM
AS_T_APPOINTMENTS APPOINTMENT,
AS_R_APPOINTMENT_TYPES APPOINTMENT_TYPE,
AS_T_CLINICS CLINIC,
CT_R_SPECIALITIES SPECIALTY,
CT_R_INSTITUTIONS INSTITUTION,
AS_T_APPOINTMENT_GROUPS APPOINTMENT_GROUP,
PI_T_PATIENTS PATIENT,
PI_R_CONF_LEVELS CONFIDENTIALITY,
PI_T_NAMES NAME,
AS_T_APPOINTMENT_SEQ_MAPPING SEQMAP
WHERE
SESSION_DATE >= TO_DATE('2004-04-01', 'YYYY-MM-DD') /*:P_VISIT_DATE_FROM*/ AND
SESSION_DATE <= TO_DATE('2004-04-02', 'YYYY-MM-DD') /*::P_VISIT_DATE_TO*/ AND
APPOINTMENT.APPOI_DOM_TYPE IN('A','AR') AND
CLINIC.CLINIC_CODE = APPOINTMENT.CLINIC_CODE AND
SPECIALTY.SPEC_CODE = CLINIC.SPEC_CODE AND
INSTITUTION.INST_CODE(+) = APPOINTMENT.INST_CODE AND
APPOINTMENT_GROUP.APPOI_SEQ (+) = APPOINTMENT.APPOI_SEQ AND
APPOINTMENT_TYPE.APPTYPE_CODE (+) = APPOINTMENT.APPTYPE_CODE AND
NAME.PAT_SEQ = NVL(APPOINTMENT.PAT_SEQ, APPOINTMENT_GROUP.PAT_SEQ) AND
NAME.NAMTYP_CODE = 1 AND
PATIENT.PAT_SEQ = NVL(APPOINTMENT.PAT_SEQ, APPOINTMENT_GROUP.PAT_SEQ) AND
CONFIDENTIALITY.CONF_CODE (+) = PATIENT.CONF_CODE AND
SEQMAP.APPOI_SEQ (+) = APPOINTMENT.APPOI_SEQ AND
SEQMAP.APPOI_SEQ IS NULL
ORDER BY
VISIT_DATE, VISIT_TIME, PATIENT_CHART_NO -
Difference between master and transaction data
whts the difference and relaionship between master data and transaction data?why do we need to upload or extract both type of data's?cant we have only transaction data?please clarify
Hi ,
<b>Master Data :</b>
The data which do not change frequently and that is needed generally for many reporting .
Eg : Customer Name , Customer Address Etcc..
<b>Transaction Data :</b>
This the data that is derived based on some master data
Eg : Creating a sales order for a Customer . So the transaction data will be
Customer Number , Order Quantity .
Why we keep master data as seperate in BW ?
Because master data is general , So we have to use that master data in many cubes for reporting purpose . Because for any report on Customer we need to give cutomer name , So we keep that master data outside of cube so that any cubes that need to use customer master can take that , So we can concentrate on other dimensions for cube ,Other wise we need to include customer name in all cubes which is reppetitive .
So the best method is to ....
First Load master Data
Then load Transactio data .
In the Bex part we combine the master data with transaction data so that we get combined data .
Eg :
Master Data : Customer No , Cust Name , Cust Address
Tran Data : Customer No , SD No , Order Qty .
We first load the master data into master data tables /BI0/M*
Then we load tarnsaction data into Cubes .
Then in BEX Reporting we create query for Transaction Cube , But fetch some master data using Bex feature , So the report output will be
Cust No CustName CustomerAddress SD no Order Quantity
Hope this Solves your Problem -
What is master data and transactional data?
Hi abapers,
I want to know the difference between master and transactional data?. What is the significane of both master and transactional data. At what situation master data is used, and at what situation transactional is used?. Please give me example of tables using them.Master Data:
Master data is data that remains unchanged over a period of time. It contains information that is always needed in the same way. For example, all personal attributes can be stored in various SAP standard infotypes as records with specific validity which are called Master data.
Master data are the critical nouns of a business and fall generally into four groupings: people, things, places, and concepts. Further categorizations within those groupings are called subject areas, domain areas, or entity types. For example, within people, there are customer, employee, and salesperson. Within things, there are product, part, store, and asset. Within concepts, there are things like contract, warrantee, and licenses. Finally, within places, there are office locations and geographic divisions. Some of these domain areas may be further divided. Customer may be further segmented, based on incentives and history. A company may have normal customers, as well as premiere and executive customers. Product may be further segmented by sector and industry.
Transaction data:
Data relating to the day-to-day transactions.
Reward if helpful.
Thanks. -
Create a table and upload data in MS ACCESS from SAP ABAP programming?
Hi All,
How to create a table in MS ACCESS database and Upload SAP database table data into MS ACCESS table using ABAP programming?
Explain: My client requirement is " If he/she runs a ABAP Program, that will create a table and upload data into MS ACCESS Database table in background. "
Could you please give the solution or code? I know the program RIACCESS and I went through the SAP Note 583698.
Is this only solution for this? Or Any other possibilities?
Please give me solution.
Thanks in advance.Hi,
It is not possible to create tables in a non SAP schema from inside SAP.
The SAP-Oracle license also does not allow you to create the table (see note 581312):
the following actions, among other things, are therefore forbidden at database level:
Creating database users
Creating database segments
Querying/changing/creating data in the database
Using ODBC or other SAP external access methods
Please refer following link,
[Ckick Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
You can also do it by LSMW,
If you are using Access 97, you can download directly into an access
database from SAP. See program RIACCESS for details. You have to establish
an RFC destination PS_ACCESS_1 and 2.
There are then a couple of function modules. Go to SE37 and put in
msaccess and hit PF4.
The following is from the readme file: sapgui/ps/readme.sap
For the MS-Access interface SAP delivers 4 files:
WDPSASTR.EXE This is an RFC server program that is called by SAP R/3
(PS module). This program creates a MS Access database. The structure
information of the tables is transferred from R/3. In addition to
these tables a table named DDIC is created. This table contains the
structure information and should in no case be modified or deleted.
WDPSATAB.EXE This is an RFC server program that is called by SAP R/3
after WDPSASTR. This program filles the tables of the database with data.
There must not be made any changes of the structure of
the tables between the calls of WDPSASTR and WDPSATAB.
WDPSAZET.EXE This is an RFC client program that triggers work/time
confirmations in the PS module of SAP R/3 (like transaction CN27 Collectiv
confirm).
WDPSAMAT.EXE This is an RFC client program that triggers material
confirmations in the PS module of SAP R/3 (like transaction MB1A - Goods
Please also refer following links,
[Click here|Upload data from MS Access tables, to SAP tables.;
Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
It is available in the "SAPGUIPS directory".
Then do the followings :
1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to
wdpsastr.exe and wdpsatab.exe respectively.
3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
Please note that Access only supports tables with up to 255 fields. -
Diff B/W master data and transaction data
Hi all,
What is the main Diff B/W master data and transaction data. give me some example ?
Thanks in Advance
Krish...hi krish,
MASTER Data is the data that exists in the organization like employee details, material master, customer master, vendor master etc. These are generally created once.
Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
In a word: in order to save costs and ensure your companys success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
TRASNACTION Data - These are the business documents that you create using the master data - Purchase orders, sales orders etc
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
Regards,
GNK. -
Downloding the SAP master data and transaction data to a flat file
Hello All,
Is there any SAP standard method or transaction to download the SAP master data and transaction data to flat file.
With out using ABAP development, SAP had provided any tool or method to download the SAP system master and transaction data to flat file.
Thanks,
Feroz.hi
as of now up to my knowledge no. -
How to use ale/idocs in sap crm to transfer master and transactional data
hi all,
I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
pls help..
regards,
kavita chaudharyKavita,
In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
You can extend the standard XIF IDOCs using Transaction BDFg as well.
Thanks,
Ravi -
What are the settings master data and transaction data from r/3 to in APO.
Hi all,
Can u suggest me ,I need to conform in apo what are the setting when transfering master data and transaction data from r/3 to APO.
frm
babuHi
The data get transfered from R3 to APO via CIF which is SAP standard.
Please find enclosed herewith the link which will provide you detail information regarding it.
http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
Please let us know if it helps you. Please also let us know if you have any more specific question.
Thanks
Amol -
Master Data and Transaction Data For DB Connect extracted Data...
Dear Experts,
I have been working on SAP NetWeaver BW 7.3 and for the first time I have extracted data from Oracle DBMS by using DB Connect. I have successfully extracted data of a View namely Sales_View into BW by creating a DataSource. This View has about 100 fields and I have been told that this view consists of Master Data and Transaction Data too. For my further reporting needs say building a Dashboard or InfoSpace I have to design a DSO and InfoCube for this DataSource. I'm bit confused about the Master Data and Transaction Data of this DataSource.
1. Should I create all custom InfoObject against all fields of DataSource for DSO and InfoCube design?
2. Do I need to create and load the Master Data for all InfoObjects or I need to create or load the Master Data for only those InfoOjects which will be
used for drill down or reporting in Dashboard or InfoSpace?
3. Do I need to load the Master Data manually by creating Flat Files and using these files for Master Data loading for required objects?
4. How should I approach the designing of DSO and InfoCube?
I will appreciate your inputs in this matter.
Many thanks!
Tariq AshrafThanks!
-
SQL LOADER , EXTERNAL TABLE and ODBS DATA SOURCE
hello
Can any body help loading data from dbase file .dbt to an oracle 10g table.
I tried last day with SQL LOADER, EXTERNAL table , and ODBC data source.
Why all of these utilities still failing to solve my problem ?
Is there an efficient way to reach this goal ?
Thanks in advanceexport the dbase data file to text file,
then you have choice of using either sql loader or external table option to use.
regards -
Spry Tables and Xml Data Sets viewed in IE7
Has anyone ever run into a problem with Spry Tables and Xml
Data Sets viewed in IE7? Work fine in IE6 and Firefox, but get the
error "exception caught while loading feed.xml: [object Error]" in
IE 7. Any ideas?
Attached is the xml I'm using.
ThanksI came looking for the answer to this question. I could not
find an answer. Eventually I found it the answer that worked for
me, a graphic designer with not much experience in xml.
The following url provided an errata file in PDF format:
www.peachpit.com/dwcs3cib
which includes the following addendum to the incomplete
instructions in the book i was using to learn about spry:
"If Internet Explorer 7 is your primary browser, you'll nee
to take some extra steps to view spry dynamic content locally.
First, your site must be within the local server webroot; be sure
your Lessons folder is stored within the Inetpub>wwwroot folder.
Next, double-click the site name in the files panel to open the
Site Definition dialogue. Click the Testing Server category; from
the Access List choose Local/Network. Click Okay to close the Site
Definition dialogue. Now, when you preview your page with Internet
Explorer, your local Web server (localhost) serves the page as
designed."
Horray for me! Now i can move on from here and actually get
some work done!
Maybe you are looking for
-
Urgent: Error in script output "output could not be issued"
Hi Experts, I am using transaction VL02N and issuing output then it is giving error "output could not be issued" in development server.when I productionize it in production it is giving the proper output when no of line item is upto two if it exceeds
-
Having problems mapping Java to ActionScript objects
I am building a service that returns a custom object tree to AS3 client over RPC call. Consider a couple of java classes, the TestObject contains a list of TestInnerObject classes: public class TestObject public int id = 123; public String
-
Convert XSL-FO template back to RTF template
Report's layout that I have to create has strict size requirements (e.g. page margins, cell sizes and so on). I created a simple RTF template using MS Word. RTF template meets this size requirements but when I print my report using Acrobat Reader rep
-
How to use a ANT to make a EAR ??
I refer the WLS Sample and use ANT to build my JAR and WAR files. Now I would like to integrate them together to be a EAR. And I think ANT also can help me to build it. Could anyone help me to write build step in ANT build.xml ?? And who know where t
-
Hi , Can Anybody send me the effort estimation template for SAP BI at [email protected] Thanks in advance, Tarun