Master data templete

Hi All,
I am newly move to ISU from SD, and was trying to configure Master Data Templete in ISU but not able to do it
Can any one please help me with a document how to create Master data templete in ISU,
Thanks and Regards

MDTs are mostly used for Master Data creation which includes Business Master data (Business Partner and contract account) and Technical Master data (Conn Obj, Premise, installation , etc ).
[Creation Steps:.|http://sapro.blogspot.com/2008/07/isu-master-data-template-how-to-create.html]
Further, typically, the master data is created during Move-in process in IS-U module.
In the latest version of IS-U i.e ECC 6.0,. the MDTs are called from Park document, whcih is used for move-in/move-out process with ISU. If you are using latest version of CRM (Web IC) then the Park document screen are ready available in CRM so you directly create park doc in ISU via CRM, which further triggers the MDTs during move-in. If you are using CRM version 5 or below then MDT is called from CRM middleware.
Eitherway you need create MDTs based on your requirement atleast one with category BPARTNER (for BP and CA) and one with category CRMNEWCONTRACT for new move-in contract.
Regards,
Siva

Similar Messages

Question to recruitment/Appl. master data u2013 PB40.

Hi, I have a question to recruitment/Appl. master data u2013 PB40.
Maybe someone can help?
I have created an own candidate action similar to the SAP action u201CInitial entry of basic data.u201D
The Customizing of the new action is the same like that of the SAP action.
The problem is that the masks are different:
The original SAP action "Initial entry of basic data" starts with:
Transaction: PB40
Program (screen): SAPMPAP4
Screen number: 100
Program (GUI): SAPMPAP4
GUI status: FAS1
The action I created starts with:
Transaction: PB40
Program (screen): MP400000
Screen number: 2000
Program (GUI): MP400000
GUI Status: INS
Why do the program, the screen number and the GUI status differ and how to change it?
Thanks in advance!
Yours sincerely,
Thomas

any talented guy do this way.
i think that ur working in E2E project work
before singoff ur business process u should give to ur users master data templets..they collect for masterdatas in before realization phase...that time u should know how many specifications is there and in spections how many in quantitative and how many qualitative u will indentify. if any query let me back.
Edited by: Lakshmiananda prasad on Oct 6, 2009 11:48 AM

Managing Org units and Master Data in project structure

How are Org units and Master data managed at the project structure? What would be the appropriate place holders for them in the structure. Should we manage it at the top of the project structure or within the business scenarios/processes. On what basis should we decide this? How would this impact in case of a global template rollout?
Please share your experiences regarding this.
Thanks.
Mike

any talented guy do this way.
i think that ur working in E2E project work
before singoff ur business process u should give to ur users master data templets..they collect for masterdatas in before realization phase...that time u should know how many specifications is there and in spections how many in quantitative and how many qualitative u will indentify. if any query let me back.
Edited by: Lakshmiananda prasad on Oct 6, 2009 11:48 AM

Item Master Data transfer maunal to backflush

Hi Experts,
I am using SAP B1 8.8 PL 13.
I want to transfer Item Master Data from Manual to Backflush method.
I have done it before but this time i am bit confuse.
Plz suggest which Templet to choose and edit and which fields to edit.
I mean complete process of DTW to import data from .csv to SAP.
Awaiting of helpful reply.
Regards,
Ravi

I got Item List from SAP Item Master Data so Item Code is correct and exist in B1.
Actually What happens when i fill Item No. (1122044360) in Templet and save it to close.
When I open it again Item Code changes in to (1.12E+09) as Excel Sheet nature if character is bigger than cell then it turns into short size like I mentioned above.
You can check it on your system.
I think this is the prb as system can't recognise the specific Code and returing error.
If there any other reason then suggest what it is?
Regards,
Ravi

Can not find master data in the cube

ItemNo is an navigation attribute of 0Material. We are using 0material in a cube. When I display the cube data include ItemNo, I don't find the data I am looking for. For example:
In 0Material:
0Material      ItemNo    Description
AAA                001           Test
BBB                002           Test
In the cube I expect to see:
0Material             ItemNo            On Hand Qty
AAA                      001                      1000
BBB                      002                       2000
Instead I saw:
0Material             ItemNo            On Hand Qty
AAA                                                1000
BBB                                                2000
0Material got refreshed after cube data got loaded. Is that why I don't find the refreshed Master data?
Thank you!

Hi,
When you laod the cube, the Values for Master are automatically get created in the master data (If they are not present earlier and with "Data Update Type in the Data Tragets" setting in InfoPackage).
Now when you are loading your cube with 0Material and Item Number, the values for Item Number seems blank. Thats the reason why you are not able to see the Item Number in Cube though it is present in Master. Because now these are two different keys, one with Item Number value and other without Item Number value.
Regards,
Yogesh.

Master data is not getting displayed in the Report in Quality

HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
Thanks

Hi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Error while creating money market transaction - payment details not retrieving from BP master data.

Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
Swami

Dear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Error while deleting the Master data

Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
Hirdesh

Hi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad

Creation of Assets master Data

Dear All,
Now we need to upload master data for Asset materials, which we are treating as UNBW Mat type (Non valuated materials). If we want to sell it after 1 Year & then what is the procedure ? In UNBW mat type there is no sales views maintained.
pls exp me
regds,
Channa

hi,
Do try to create the new material type with your specified view, you may also copy the exisisting the mataerial types, so that the you can get few of the default settings automatically and for few you can make changes...
Regards
Priyanka.P

What are the dependent master data for running MRP

Hi Experts,
My client wants to Run MRP After 8 Months of implementation. Now i want to know
1) What are the Master Data need to be check. They are Using the Strategy 20.
2) They have confirmed sales order for few customers. Forecast sales orders for few customers.How to map it in sap.
3) Where will i get Gross Requirement in SAP. Because MRP run will generates the net requirements.
4) Is there any report in SAP displays the Forecast values for the selected material.
Please help me on the above points.
Thanks
Satheesh

HI Vishwa Upadhyay,
Thank you Once again,
The first point is cleared. Can you please suggest me on the 2,3& 4 points please. What are the configuration settings needed for the different sales order type( i.e.. confirmed and forecast)
Thanks
Satheesh.N

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

Automatic PO creation from PR with no master data

Dear gurus,
Is it possible to run ME59- Auto PO creation from approved PR with no master data/source assigned/PIR? Assuming user create adhoc PR.
Is it possible to run this process successfully if i didn't meet on the criteria below? let say no.1 is not checked?
1.Material Master purchasing view, check automatic PO check box.
2. Vendor Master purchasing view, check automatic PO check box.
3. Maintain Source list for Vendor and Material (transaction ME01) and also see validity period.
4. Maintain Purchase Info Record (transaction ME11), check info record category (must be standard or pipeline or subcontracting)
5. Create a Purchase Requisition ( transaction ME51N), during creation select check box of Source Determination.
6. Use transaction ME59 and execute for purchase requisition for vendor, you will be able to create automatic PO.
Thanks in advance.

Hi,
yes all point should be checked
check following link
[http://www.sap-img.com/materials/steps-to-create-auto-po.htm]
Regards
Kailas Ugale

Steps to prepare and upload legacy master data excel files into SAP?

Hi abap experts,
We have brand new installed ECC system somehow configured but with no master or transaction data loaded .It is new empty system....We also have some legacy data in excel files...We want to start loading some data into the SAP sandbox step by step and to see how they work...test some transactions see if the loaded data are good etc initial tests.
Few questions here are raised:
-Can someone tell me what is the process of loading this data into SAP system?
-Should this excel file must me reworked prepared somehow(fields, columns etc) in order to be ready for upload to SAP??
-Users asked me how to prepared their legacy excel files so they can be ready in SAP format for upload.?Is this an abaper job or it is a functional guy job?
-Or should the excel files be converted to .txt files and then imported to SAP?Does it really make some difference if files are in excel or .txt format?
-Should the Abaper determine the structure of those excel file(to be ready for upload ) and if yes, what are the technical rules here ?
-What tools should be used for this initial data loads? CATT , Lsmw , batch input or something else?
-At which point we should test the data?I guess after the initial load?
-What tools are used in all steps before...
-If someone can provide me with step by step scenario or guide of loading some kind of initial master data - from .xls file alignment to the real upload - this will be great..
You can email me some upload guide or some excel/txt file examples and screenshots documents to excersize....
Your help is appreciated it.!
Jon

hi,
excel sheet uploading:
http://www.sap-img.com/abap/upload-direct-excel.htm
http://www.sap-img.com/abap/excel_upload_alternative-kcd-excel-ole-to-int-convert.htm
http://www.sapdevelopment.co.uk/file/file_upexcel.htm
http://www.sapdevelopment.co.uk/ms/mshome.htm

Master data templete

Similar Messages

Maybe you are looking for