Master Data Text for Infoobject Plant Section

Hi Experts,
I've changed the standard Infoobject of Plant Section (0PLANTSECTN), so the master data (text & attribute) is active now.
My question is: Does SAP BW provide the standard business content for master data of 0PLANTSECTN?
Coz i've checked it on RSA5, but the datasource is not exist.
Thanks for helping, hope you could give me some enlightenment
Warm Regards,
Tika

Thanks for ur answer Swapnil..
So the only thing i can do is create a custom DS and load the data (text) via Flat File? Or is there any way else to load the master data text?
As I know, loading data from flat file is only can be done manually. The problem is, i have to make sure, that data in BW is always relevance with data in ECC. Hence, i need the standard DS. So i could load it directly from ECC.
Am very appreciate, if any of u could share the best way.
Thanks

Similar Messages

How to load master data texts for (0calmonth)

Hi pro's
i hve a issue.
How to load master data texts for 0calmonth.
any help is appreciated
regards
cheers

within the admin workbench goto source systems, right click on your source system and click on transfer global settings. There you can choose fiscal year variants and some other options to be loaded to BW.
Regards

Loading Master data :Text for 0GL_ACCOUNTT

Hi,
I am trying to load master data text from BW 3.5 system to BI 7.0 through Export data source. The data transfer is terminated with the following error meassage.
'In the source system, there is no transfer structure available for
InfoSource 80GL_ACCOUNTT .'
I have selected the check box in the Infoobject Characteristic with the export data source and then replicated the data source in BI 7.0.
Please provide me with suitable solution.

Hello Richa,
Last week I have a problem similar, try to generate 80GL_ACCOUNTT in BI 7.0 first, right clikc in infosource (0GL_ACCOUNTT) -> Generate Export Datasource.
Hope its help..

Load Master Data Text for 0COSTELMNT

Hello,
I would like to load text for master Data Cost Element (infosource 0COSTELMNT). The loading is Ok but, when I execute the infopackage the next time, I have the status yellow and the message "The data request was a full update. In this case, the corresponding table in the source system does not contain any data. System response
Info IDoc received with status 8.".
It's normal that there are no news datas to upload but the problem is that the process remains not yet completed.
The parameters of the scheduler are :
- selection : none and "Use conversion routine"
- Processing : PSA and then in the InfoObject
- Update : Full update and Fixed Time Interval (start date : today, end date : 31.12.2006)
- Schedule : Start Data Load Immediately
The option Treatment of Warning is set to green.
Thanks in advance to help me.
Daniel.

Hi,
It's yellow.
On the R/3 system, when I launch RSA3 and Extraction for the DataSource 0COSTELMNT_TEXT, the result is 0 enreg too (no selection in the screen).
Thanks.

How to create master data/text for an info object

Hi All,
I am working on a report and having a problem with an info object since it has no master data. This characteristic is supposed to be in the selection parameters and also should contain key and text in it. Since there is no master data for this info object there is no text and keys don't come up. Does any one knows how to add master data to this info object without reloading the ODS?
Thanks

Mike,
You shold load the master data into BW first,
othere wise you can do one thing
goto infopackage and schedule where in the update tab select the radio button
Always update the data,even if no masterdata is exist for that.
Regards.
Prasad

Master data maintenance for two plants

Dear All,
there are two plants having same materials on both plants. sohow can we maintain aster data for both plants,
should we create MICs for both plants,
and inspection plan for both plants

But you are then making the same product using 4 different methods! That is terrible from a quality perspective. If I'm a customer I don't want to have to worry about what plant made it. It totally goes against having standard specs. Quality should be consistent across plants. You can manufacture it however you want, but the quality control, i.e. the tests and specs used must all be the same across all plants. Its one of the reasons SAP is designed the way it is. (One exception may be if a country requires a specific test for a product that other countries don't.)
As far as changing specs and adding/deleting characteristics, those aren't things that should be changing very much. Testing and specs should be pretty static data once it is created. Coordinating changes shouldn't be that difficult. Even when using separate plans you still need interplant coordination. The last thing you want is to wind up with 4 different specs being used across 4 different plants.
It also means anything like COA's or certificates have to be managed much differently with a much higher level of maintenance. Using any features of batch management are almost totally wiped out. You could maintain separate plans and utilize the same MIC's however and use batch management. But using separate MICS would really hurt the usage of batch classification. Comparing quality between plants becomes much, much harder. Reports can't be consistent.
My biggest objection is not that you would want to do this. I can understand that there may be a unique sitiation out there that requires separate plans and maybe separate MICS as well. But you told the poster that it was required to use separate inspection plans at different plants.
I know not everyone sees and knows everything about everything. I certainly don't and I've made mistakes. But if we are going to post advice and solutions, we need to try and make sure it's correct information.

Master Data Text Used as Line Items in ODS

Hi Experts! 
I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? 
What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.Hi Experts! 
I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? 
What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.
Once I have created it, I already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. 
Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. 
How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. 
I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.
Kindly seeking for your assistance and advance thanks!
Once I have created it, I already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. 
Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. 
How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. 
I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.
Kindly seeking for your assistance and advance thanks!

Hi Simon, 
Thanks for the reply! 
First of all, yes, I think we are on the same page regarding what I want to do... I have created a master data infoObject in BW, created a customized extractor in R/3 under CO-PA-IO node, and mapped them to each other in BW such that when i execute a package in InfoSource in BW, i am able to load master data text in InfoObject Rev Type in BW. 
Kindly explain more on "you should have created the revenue type as a text datasource and loaded the data into the text and not the master data". Do you mean to say that I should have just created a regular datasource (i.e. Flexible Update in any Data Target InfoSource), rather than a direct update of Master Data datasource? 
However, if this is what you meant, please remember that for other characteristics such as Sub Product A, B, Product Lines, Sales Region, Business Center etc. (as seen in FS10N tcode per GL), are reflected in ODS per line item, and they are setup as master data. So I was thinking maybe i just missed a step in mapping. 
Is this what you meant? My main goal is to be able to have the line items i load in ODS be matched to the particular revenue type for that GL's profit center (seen in FS10N tcode in R/3)
Thanks again.

Profit Center Master Data text

HI All,
I have a few problems regarding the master data text for 0profit_ctr.
Our company has uploaded quite alot of historical data ( not my idea) to its master data.
The problem is that for each Profit center record we have two lines in 0profit_ctr, both with a different set of FROM and TO dates.
Only one of these records are we interested in and thats the one with To date of 31.12.9999.
What I want to do is for the system to upload the Text field of the profit centre regardless of the dates involved, at present the old record has no profit centre text and this is the record the reports are reading.
The system is only picking up the text record for the active profit centre.
I have tried deleting the from and To dates for 0profit_ctr_text but still the load fails.
Any ideas?
Thanks

Is it a time dependent master data? Then you will not be able to delete the From and To Date.
If you are not interested in the validity of a profit center, You have to make it time independent.
Also when you say it loads Text..Where are you trying to Load. If you are trying to Update using a Routine/Code, Then while reading the master data, You can delete the records having Text as blank and then update to the Target Field.
Thanks
Sachin

What are the master data tables for 'Plant'?

Hi friends,
What are the master data tables for 'Plant' that contain below data?:
PLANT
NAME1
NAME2
LANGUAGE
HOUSE_NUM_STREET
PO_BOX
POSTAL_CODE
CITY
COUNTRY_KEY
REGION
COUNTRY_CODE
CITY_CODE
TIME_ZONE
TAX_JURISDICTION
FACTORY_CALENDAR
Thanks a lot!

Hi,
Plz try out following tables for your requirement.
TOO1W
ADRC
J_1IMOCOMP
T001W : werks TYPE t001w-werks, "PLANT
        name1 TYPE t001w-name1, "PLANT DESCRIPTION
        adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
ADRC: addrnumber TYPE adrc-addrnumber, "ADDRESS NUMBER
         str_suppl1 TYPE adrc-str_suppl1, "STREET2
         str_suppl2 TYPE adrc-str_suppl2, "STREET3
         street TYPE adrc-street,          "STREET
         city1 TYPE adrc-city1,            "CITY
         post_code1 TYPE adrc-post_code1, "CITY POSTAL CODE
         post_code2 TYPE adrc-post_code2, "PO Box postal code
         tel_number TYPE adrc-tel_number, "TELEPHONE NUMBER
         fax_number TYPE adrc-fax_number, "FAX NUMBER
         str_suppl3 TYPE adrc-str_suppl3, "STREET4
         location TYPE adrc-location,      "STREET5
         city2 TYPE adrc-city2,
For Tax Details :
J_1IMOCOMP :   werks TYPE j_1imocomp-werks,
                          j_1icstno TYPE j_1imocomp-j_1icstno,
                          j_1ilstno TYPE j_1imocomp-j_1ilstno,
Hope this will help.
Regards,
Archana

Effect of 'No update' for master data texts

Hello all,
I am using flexible update - update rules - for master data text. I want to confirm effect of 'No update' in following scenario
In the fisrt set of update rules -from first source system -I have mapped both short text and long text
Key | short text| long text
......| overwrite| overwrite
K1 | some SHTX| some LGTX
In the second set of update rules, I have selected 'No update' for Long text
Key | short text | long text
......|overwrite| NO UPDATE
K1 | some SHTX |
My loading sequence is first source system followed by second source system
what should be my ultimate long text and why?
Many thanks in advance!
Regards
Sanjyot

Hi surekha,
your long text will not get changed.
Take the example you mentioned
Key | short text.....| long text
........| overwrite......| overwrite
K1 | some SHTX.. | some LGTX
In the second set of update rules, I have selected 'No update' for Long text
Key | short text... | long text
........|overwrite......| NO UPDATE
K1 | some SHTX. |
In the second set of update rules, you mentioned "No UPdate", So, when a record with the same key is found n Masterdata, it is not going to make any changes to the field Long text.
Where as short text will get overwritten.
Take some data for ex with the above mentioned type
data from source 1 : 2000 Maggi Noodles
data from source 2 : 2000 Feasters
when the data from first source system arrives, data will be 2000 maggi noodles
when the data from second source suystem arrives, as there exist this records with same key(2000), it checks for the other fiels
short text will be over written with the value in second system (according to rules its in overwrite mode)
Long text will not be updated as the rule says no update.
hope this helps,
Cheers,
Srinath.
Cheers,
Srinath.

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

How to regularly update the Master data/Text/ Hierarchy for BW DEV?- Urgent

Hi Experts,
Can anyone help me to understand how to update the Master data/Text/ Hierarchy regularly for BW DEV.
Since all the new query developments are taking place in DEV, users are not finding the latest Masterdata/ Texts /Hierarchy in the DEV system.
I have searched in SDN and got a document "HOW TO DOWNLOAD A HIERARCHY TO A FLAT FILE". However, is there any other way to upload the master data automatically on periodical basis.
Please help urgently.
Advance Thanks,
BW USA

If you want to extract master data from PRD in order to load in DEV, i suggest to do this (its a tricky thing):
For example, you want to download 0EMPLOYEE
1-In PRD, transaction RSD1
2-Enter 0EMPLOYEE
3-Copy the Master table for 0EMPLOYEE (/BI0/MEMPLOYEE)
4-transaction SE16
5-Enter the table name /BI0/MEMPLOYEE
6-in the selection screen, go to "Options" Menu and select "User parameters", and now select "Standard List SE16"
7-Execute
8-Now its show's up the 0employee data, go to "System" menu - List - Save - Local File
9-After you have the flat file, only rest create Infopackae in DEV Env. and load it from the flat file.
Asigns points if useful.
Regards

Insert new Master Data Record for an InfoObject using a Function Module

Hi @ all,
is there any Function Module for creating a new master data record for an InfoObject? Implementing a FM for inserting a master data record into a master data table is done quickly. I think there will be problems with inconsistency implementing a FM using a simple "Insert" Statement. Isn´t it?
I know it is possible to maintain an InfoObject in RSA1 (Master data IO> right click>Maintain Master data>execute(F8)> ...) but I have another requirement for using a FM.
Thanks!
Regards,
Johannes

use this
RSNDI_MD_ATTRIBUTES_UPDATE

Master data text after upgrade to NW700 SPS15 (SP17 for SAP_BW)

Basically all the Technical Names with an Underscore _ are replaced by $ symbol.
This issue as depicted here under appeared after the upgrade from BW3.5 to BI7.0, all Master data texts with Underscore __ appears as $
Before upgrade     After upgrade
YACCOUNT___T     YACCOUNT$T
YCHRT_ACT___T     YCHRT_ACT$T
Any body faced this problem.
Regards,
Giridhara

Anyway. I opened a oss message with SAP and they confirmed that RSA1OLD don't work but can only work with RSA1. The problem is at RSA1OLD and when you check dataflow in RSA1OLD, it gives error, while in RSA1, it works. SAP is working on this. Assume that they would correct it later.
Regards,
Giridhara.

Master Data Text and Attributes

Guys,
I read some posts on sdn regarding differences between master data texts and attributes and now I am a little confused. I thought attributes define a char. then what does text do? Does it not define or describe the char as well? If both are doing the same thing then why do we need both ? I am not sure if my understanding is correct. Please help me.
Thanks,
RG

Hi Ram,
To understand in a better way little bit of R/3 work would have been helpful.
In R/3 Every entity has master data maintained like customer, material, plant etc.
If you would see a customer in R/3 you can see it has lots of information..like address,telephone number,street company name, etc.
And along with it we have customer name...i.e. description..(text)
Now in R/3...text tables are generally maintained separately then master data tables...it can be together as well.
Something like for you Ram Goswami is descrption(text) for the user ID XXXXXXX in SDN.
Email ID and company name is the master data stored here for him.
BW has used the same modelling concept to keep the text table separate from the msater data table.
It creates to separate data target for master data and text so that two seperate tables can be maintained in BW and you have to load the data in both to see the master as well as text.
Since we have separate master data table and text table in R/3 therefore we have separate data sources as well based on them.
You would like to have you master data table exactly as the master data table of R/3 so you will add attributes in the infoobject 0customer and it will create a P table for 0customer...keep adding attributes to make the columns in the table and to make the exact copy of R/3 table i.e. to bring all the information from R/3 about customer master you add attributes in the 0customer.The data soiurce based on this table in R/3 will contain the fields from the table.
Now you do the mappings with fields between infoobject and data source and load the data ...so master data is loaded.
For text...once you check the text option in infoobject..SAP creates a new table Tcustomer in the background..
Now you have to do the mappings for this as well through the data source based on the text table in R/3.
In some cases the master data table contains text as well and in that case you use the same data source based on this table to create two separate update rules one for master data object and another one for text object and do the mappings accordingly.
In this case you schedule the load to both the target at the same time and data gets loaded.
but for different data sources you will have to schedule the load separately.
Once data loaded for this...now you can use it in the report and see the text as well as master data attributes in the reports and there values.
I hope that was more then enough
Thanks
Ajeet

Master Data Text for Infoobject Plant Section

Similar Messages

Maybe you are looking for