Master data to be deleted after adding attribute

Hii All,
I have a master data info object, which contains the data.what will happen if i add new attribute to this master data info object.
right now this master data info object doesn't contain any data for this newly added attribute.
then i tried to delete data from the master data info object.but it is not allowing me to do so as it is used in three info cubes. i think if i delete the data then it will allow me to delete data from master data info object.But that is not possible as subsequently i have to delete the data from info cube in productio also.
So ran full update for the master data info object now i have the data for the newly added attribute.But when i am running report and try to drill down on the newly added characteristic it shows "#" not assigned.
What should i do..
pls help..
Regards,
Viren

Hi Rana
1. <i>I have a master data info object, which contains the data.what will happen if i add new attribute to this master data info object.</i>
Nothing will happen if you add a new attribute to the existing one. If your adding in the dev system, it will as you to create a request when you activate it.Just create a request the transport it.
2.<i>But that is not possible as subsequently i have to delete the data from info cube in productio also.</i>
You can delete the data in the dev system cube irrespective of production server cube data. If you delete the cube then you have to worry but deleting the data from the cube is not to worry. You can go ahead with deleting the data in the cube in dev server.
3.<i>So ran full update for the master data info object now i have the data for the newly added attribute.But when i am running report and try to drill down on the newly added characteristic it shows "#" not assigned.</i>
AFter loading the data . right click on the master data object and clik on Activate masster data or RUn apply hierarchy attribute change in Tools menu.
Hope this helps
Ram

Similar Messages

  • Issues with Writing back data to Planning Cube After adding a new characterstic

    Hello,
    We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
    Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
    After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
    This new characteristic is also present in the reporting cube and has been added and transferred to MP.
    This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
    ~~Characterstic combination cannot be assigned to part provider ~~
    ~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
    ~~ Entered values are incorrect:Correct before navigation ~~
    The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
    regards,
    Karthik

    Hi,
    Try to check that all characteristics are correctly assigned at multiprovider level.
    hope it helps

  • BIA Master Data Index Not Updated After Change Run

    In BIA it shows master data 0VERSION table /BI0/SVERSION has 360 records which matches with the number of entries in SE16 /BI0/SVERSION.  One record was added to 0VERSION so now SE16 /BI0/SVERSION shows 361 records.  I did a change run for this infoobject 0VERSION but the BIA index for /BI0/SVERSION still only show 360 records. I expect it to show 361 records after the change run.  Is this a bug?  Thanks.

    Hi Thao,
    I see one of 3 possible scenarios:
    1) You load 0VERSION as a part of master data load (from flat file or another system). You see your 11th record in version "M" after load and then you run change run that makes "A" version of the record. ---> BIA index should be automatically updated. If not - open OSS message to SAP.
    2) You load transactional data in an InfoCube, and it has new value for characteristic 0VERSION. ---> In this case you need to run roll-up of this new load request in the InfoCube to let BIA index be in-sync.
    3) You are modifying 0VERSION manually (e.g. SQL INSERT statement), so system is not aware of new record at all. ---> You need to run the mentioned single-table-index program to update BIA index.
    Is it any of these 3 scenarios, or you have the 4th one?
    Regards,
    -Vitaliy
    Edited by: Vitaliy on Aug 19, 2008 1:59 PM

  • Master Data -- unable to delete the request

    I loaded master data for 0EMPLOYEE info object, all the records Added but the request is in Read,
    I am trying to QM status Green Manually it is giving the message “QM action not allowed for DTP requests in master data and Text Tables “.
    I am unable to delete the request also, when I am trying to delete it is saying
    <b>Error:</b>
    Data inconsistency; Partition /BIC/B0000959000 not deleted
    Message no. RSAR026
    <b>Diagnosis</b>
    In table RSTSODSPART you selected all the requests of a partition to be deleted logically. Some entries partno = 0 still exist in the partition. Therefore the partition is not deleted.
    <b>System Response</b>
    The system outputs an error when deleting the partition.
    <b>Procedure&</b>
    Check the table for data consistency.
    <b>Error:</b>
    Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '      177'
    Message no. RSSTATMAN102

    Hi,
    I have answered to another thread like this one which is still unsolved (I suggested to open the issue in the OSS)
    You can try the following OSS note for a start
    SAP Note 1048161 P14:Set QM status for yellow requests using funcion module
    I've also found a very recent one:
    SAP Note 1078527 P16:Request deletion with error RSSTATMAN 102 in row 34
    hope this helps...
    Olivier.
    Message was edited by:
            Olivier Cora

  • Master Data Info Object is not updating Attribute data

    Dear Sdns,
    We are loading master data to ZCOMP_GL Info object through flat file  extraction... ZOMP_GL have four attributes.. Leaving three of the attributes Only one of the attribute which is CS_ITEM holds the data.
    We loaded data ffrom flat-file.. It laoded sucessfully upto the PSA and data is available... And when we runned DTP the load was successfull.. In the manage screen of the Info object it shows the records are added successfully.. But when we see the data in ZOMP_GL. We are not able to see the Data  for CS_ITEM which is attribute.... Also we runned Attribute change run..
    Kindly Advice me..
    Warm Regards,
    Aluri

    Activate the data in the info object.
    Ravi Thothadri

  • Unused Master Data Display and Deletation

    Hi all,
    To delete any unused master data we have to goto infoobject and execute delete master data.
    Is there any other way to display or delete master data records which is not used anywhere in BW system?
    Because when we are trying to delete master data it is taking long time and lost of resource. Then after also due to other processes are waiting in the system we have to kill that job after 20 to 24 hours.
    Can anybody please guide me through this?
    Regards,
    Rohan Shah

    Hi Rohan,
    You can delete the data in the tables by the way below.(However this is not the ideal approach)
    1. Go to SE14 -> select 'Tables' from Dictionary objects & give table name (e.g. /BI0/SCOMP_CODE) -> Click Edit -> choose the option "Activate and adjust Database" and select "Delete Data".
    On execution, it will delete the data.
    Hope it helps.
    Rgds,
    VA

  • Error when Refresh Planning after adding attribute V9.2.1

    Has anyone encountered this and what is the solution:
    Added new attribute dimension in planning web and added attribute members. When I try to do incremental or full refresh, receive error message:
    Errors detected (AssocAttrDimension, 1060057) Could not associate attribute with member (attribute,member) Decanatura, Career -2147218881
    Career is the dimension and Decanatura is the attribute added
    Using 9.2.1
    Thanks
    Jeff

    Hi Jeff,
    please find some findings from planning DBAG which may be useful to resolve your issue:
    You can assign attributes only to sparse dimensions.
    You cannot assign attributes to label-only members.
    After you create attributes and attribute values, you can assign attribute values to each member of the dimension.
    You must assign attribute values to dimension members at the same member level within a dimension.
    You can define attribute values for Entity, user-defined custom dimensions, and Account
    members if the Account dimension is designated as a sparse dimension in all plan types. You
    can then assign attribute values to members of a dimension.
    Attribute values for an attribute must be assigned to the same-level sparse dimension members.
    Assigning an attribute value to another level causes an error during the application refresh.
    hope this helps.
    www.dornakal.blogspot.com
    Edited by: Dornakal on May 28, 2009 5:55 AM

  • How to get the last date of that month after adding the two month.

    Hi,
    I have a requirement, My input is month/lastdate of the month/year after adding 2 months i want the same format mont+2/lastdate of the month/year.
    Please let me know the exact FM for this.
    I have check this FM RE_ADD_MONTH_TO_DATE.
    Input:                                           
    Import parameters               Value    
    MONTHS                          02       
    OLDDATE                         02/29/2008
    Output:                                           
    Export parameters               Value     
    NEWDATE                         04/29/2008
    But this wrong because i am expecting the last date of the April.
    2) I have checked another FM that also also shows the wrong output: RP_CALC_DATE_IN_INTERVAL                                                
      Import parameters               Value         
      DATE                            12/31/2008    
      DAYS                            00            
      MONTHS                          02            
      SIGNUM                          +             
      YEARS                           00                                                                               
    Export parameters               Value         
      CALC_DATE                       03/01/2009    
    Thanks In avance,
    Thanks & Regards,
    Venkata

    Hi,
    do the RE_ADD_MONTH_TO_DATE then
    Plug the result date into FM RP_LAST_DAY_OF_MONTHS
    Regards
    Stu

  • Error after adding attribute

    hi i have added attribute in my EmpDetails data control but now when i run the application i get the error Definition LastName of type Attributes is not in EmpDetails1

    where is the classes folder and where is some file system tool can you be in details please
    my log is*** Using HTTP port 7101 ***
    *** Using SSL port 7102 ***
    "C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\bin\startWebLogic.cmd"
    [waiting for the server to complete its initialization...]
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
    PATH=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\native;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\oracle\MIDDLE~1\JDK160~1\jre\bin;C:\oracle\MIDDLE~1\JDK160~1\bin;C:\forms;C:\product\11.2.0\dbhome_1\bin;C:\product\11.2.0\dbhome_1;C:\DevSuiteHome_1\BIN;C:\DevSuiteHome_1\jlib;C:\Program Files\PHP;C:\Program Files\PC Connectivity Solution\;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Common Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\product\11.2.0\dbhome_1\BIN;C:\DevSuiteHome_1;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program Files\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\forms\sms_code.pll;C:\mywls\wlserver\bin;C:\Java\jdk1.6.0_21;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_24"
    Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
    Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
    Starting WLS with line:
    C:\oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\DOCUME~1\Desmond\LOCALS~1\Temp\trustStore5345414217410371315.jks -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
    <11 Dec 2011 3:56:44 PM> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <11 Dec 2011 3:56:44 PM> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <11 Dec 2011 3:56:45 PM> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
    <11 Dec 2011 3:56:45 PM> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
    <11 Dec 2011 3:56:48 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <11 Dec 2011 3:56:48 PM> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <11 Dec 2011 3:56:49 PM> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <11 Dec 2011 3:56:49 PM> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
    <11 Dec 2011 3:56:49 PM> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
    <11 Dec 2011 3:57:02 PM> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <11 Dec 2011 3:57:19 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <11 Dec 2011 3:57:19 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
    <11 Dec 2011 3:57:42 PM> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <11 Dec 2011 3:57:42 PM> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00114. Log messages will continue to be logged in C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
    <11 Dec 2011 3:57:42 PM> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <11 Dec 2011 3:57:43 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <11 Dec 2011 3:57:43 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <11 Dec 2011 3:57:43 PM> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\oracle\MIDDLE~1\JDK160~1\jre\lib\security\cacerts.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 127.0.0.1:7102 for protocols iiops, t3s, ldaps, https.>
    <11 Dec 2011 3:57:44 PM> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
    <11 Dec 2011 3:57:44 PM> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
    <11 Dec 2011 3:57:45 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <11 Dec 2011 3:57:45 PM> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    IntegratedWebLogicServer startup time: 64047 ms.
    IntegratedWebLogicServer started.
    [Running application HrSystem on Server Instance IntegratedWebLogicServer...]
    [03:57:46 PM] **** Warning: Application HrSystem may have been left deployed on the server. Undeploy it from the admin console.
    [03:57:48 PM] Web Module HrSystemWebApp.war recognized in project HrSystem.jpr
    [03:57:48 PM] ---- Deployment started. ----
    [03:57:48 PM] Target platform is (Weblogic 10.3).
    [03:57:49 PM] Retrieving existing application information
    [03:57:49 PM] Running dependency analysis...
    [03:57:49 PM] Deploying 2 profiles...
    [03:57:50 PM] Wrote Web Application Module to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\HrSystem\HrSystemWebApp.war
    [03:57:51 PM] Wrote Enterprise Application Module to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\HrSystem
    [03:57:51 PM] Deploying Application...
    [03:58:39 PM] Application Deployed Successfully.
    [03:58:39 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
    [03:58:39 PM] http://127.0.0.1:7101/HrSystem-HrSystem-context-root
    [03:58:39 PM] Elapsed time for deployment: 51 seconds
    [03:58:39 PM] ---- Deployment finished. ----
    Run startup time: 51047 ms.
    [Application HrSystem deployed to Server Instance IntegratedWebLogicServer]
    Target URL -- http://127.0.0.1:7101/HrSystem-HrSystem-context-root/faces/DeptEmpPage
    <ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
    <UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
    <LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
    oracle.jbo.NoDefException: JBO-25058: Definition LastName of type Attribute is not found in EmpDetails1.
         at oracle.jbo.server.ViewObjectImpl.findAttributeDef(ViewObjectImpl.java:7322)
         at oracle.adf.model.bc4j.DCJboDataControl.getAttributeDefs(DCJboDataControl.java:2612)
         at oracle.adf.model.binding.DCIteratorBinding.getAttributeDefs(DCIteratorBinding.java:3321)
         at oracle.jbo.uicli.binding.JUCtrlValueBinding.fetchAttrDefs(JUCtrlValueBinding.java:514)
         at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDefs(JUCtrlValueBinding.java:465)
         at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeCount(JUCtrlValueBinding.java:1475)
         at oracle.jbo.uicli.binding.JUCtrlAttrsBinding.updateValuesFromRow(JUCtrlAttrsBinding.java:134)
         at oracle.jbo.uicli.binding.JUCtrlValueBinding.updateNavigated(JUCtrlValueBinding.java:290)
         at oracle.jbo.uicli.binding.JUIteratorBinding.navigated(JUIteratorBinding.java:310)
         at oracle.jbo.common.RowSetHelper.fireNavigationEvent(RowSetHelper.java:264)
         at oracle.jbo.server.ViewRowSetIteratorImpl.notifyNavigationToRow(ViewRowSetIteratorImpl.java:3661)
         at oracle.jbo.server.ViewRowSetIteratorImpl.notifyNavigation(ViewRowSetIteratorImpl.java:3632)
         at oracle.jbo.server.ViewRowSetIteratorImpl.next(ViewRowSetIteratorImpl.java:1781)
         at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1585)
         at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:3556)
         at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:10196)
         at oracle.adf.model.binding.DCIteratorBinding.setupRSIstate(DCIteratorBinding.java:808)
         at oracle.adf.model.binding.DCIteratorBinding.refreshControlAndNotifyDCE(DCIteratorBinding.java:707)
         at oracle.adf.model.binding.DCIteratorBinding.rangeRefreshed(DCIteratorBinding.java:914)
         at oracle.jbo.common.RowSetHelper.fireRangeRefreshed(RowSetHelper.java:175)
         at oracle.jbo.server.ViewRowSetIteratorImpl.notifyRangeRefreshed(ViewRowSetIteratorImpl.java:3596)
         at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2813)
         at oracle.jbo.server.ViewRowSetIteratorImpl.refresh(ViewRowSetIteratorImpl.java:3033)
         at oracle.jbo.server.ViewRowSetImpl.notifyRefresh(ViewRowSetImpl.java:2797)
         at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1255)
         at oracle.jbo.server.ViewRowSetImpl.executeEmptyRowSet(ViewRowSetImpl.java:1429)
         at oracle.jbo.server.ViewObjectImpl.executeEmptyRowSet(ViewObjectImpl.java:7129)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryModelImpl._handleAutoExec(FacesCtrlSearchBinding.java:1863)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryModelImpl._performOneTimeActions(FacesCtrlSearchBinding.java:1997)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryModelImpl.<init>(FacesCtrlSearchBinding.java:1479)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.getQueryModel(FacesCtrlSearchBinding.java:334)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.internalGet(FacesCtrlSearchBinding.java:3648)
         at oracle.adf.model.binding.DCExecutableBinding.get(DCExecutableBinding.java:115)
         at javax.el.MapELResolver.getValue(MapELResolver.java:164)
         at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
         at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
         at com.sun.el.parser.AstValue.getValue(Unknown Source)
         at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
         at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.getProperty(UIXComponentBase.java:1485)
         at oracle.adf.view.rich.component.UIXQuery.getModel(UIXQuery.java:493)
         at oracle.adf.view.rich.component.UIXQuery._setupAndStoreContextInRequest(UIXQuery.java:301)
         at oracle.adf.view.rich.component.UIXQuery.encodeBegin(UIXQuery.java:222)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1650)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderChildrenAfterHelpAndInfo(PanelHeaderRenderer.java:637)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer._renderContentCell(PanelHeaderRenderer.java:1169)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderContentRow(PanelHeaderRenderer.java:575)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.encodeAll(PanelHeaderRenderer.java:248)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:447)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$1500(PanelGroupLayoutRenderer.java:30)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:734)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:637)
         at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:187)
         at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:318)
         at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:283)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:360)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
         at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeFacet(DecorativeBoxRenderer.java:440)
         at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer._encodeCenterPane(DecorativeBoxRenderer.java:704)
         at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeAll(DecorativeBoxRenderer.java:380)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
         at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeFacet(DecorativeBoxRenderer.java:440)
         at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer._encodeCenterPane(DecorativeBoxRenderer.java:704)
         at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeAll(DecorativeBoxRenderer.java:380)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:879)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:1294)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeMiddlePanes(PanelStretchLayoutRenderer.java:351)
         at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:316)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
         at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
         at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:274)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
         at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
         at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1277)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1655)
         at oracle.adfinternal.view.faces.component.AdfViewRoot.encodeAll(AdfViewRoot.java:91)
         at com.sun.faces.application.view.JspViewHandlingStrategy.doRenderView(JspViewHandlingStrategy.java:431)
         at com.sun.faces.application.view.JspViewHandlingStrategy.renderView(JspViewHandlingStrategy.java:233)
         at org.apache.myfaces.trinidadinternal.application.ViewDeclarationLanguageFactoryImpl$ChangeApplyingVDLWrapper.renderView(ViewDeclarationLanguageFactoryImpl.java:350)
         at com.sun.faces.application.view.MultiViewHandler.renderView(MultiViewHandler.java:131)
         at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:273)
         at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:165)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:1027)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:334)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:232)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:313)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)

  • Master data tables not available after installing trail version sap abap

    Hi Experts,
    After installing trail version of sap for practicing SAP ABAP..i am not able to access master data tables like MARA EKKO etc.
    Please let me know how i can access these tables data .
    Is there any alternate to access these tables?
    Thanks and Regards,
    Siva

    Hi Siva,
    Master data table and any other application table are not present in trail systems. Notice that solely purpose of those trials is to learn/practice basis stuff and ABAP programming.
    If you need to practice ECC's modules like FI, SD, ... you need to have an access to IDES system. For this you need to be SAP partner or customer.
    cheers
    m./

  • Outlook calendar items deleted after adding exchange account to iCal

    I added my exchange calendar to iCal last night. When I logged on this morning all of my outlook calendar appointments are gone. How do I retrieve and why did iCal delete all of my exchange/outlook calendar appointments?

    i removed and added in mine. once I rebooted it there asa question to accept the cert and email started to work.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Data lost/Rows deleted after commit

    Dear all,
    I am struggling with a very critical issue in oracle 10g express.
    I have done following steps...
    01. Create table Sawan
    02. insert into Sawan
    03. select count(*) from Sawan; (This returns 1)
    04. commit;
    05. select count(*) from Sawan; (This returns 0)
    The problem here is after commitng, rows has been deleted.
    Please suggest for any possible reason as soon as possible.
    Thanks
    Sawan

    As soon as possible,hmmm!
    Well this is only possible if you have created a temp table.See this,
    SQL> create global temporary table temptab
      2  on commit delete rows
      3  as select * from dept;
    SP2-0640: Not connected
    SQL> conn scott/tiger
    Connected.
    SQL> create global temporary table temptab
      2  on commit delete rows
      3  as select * from dept;
    Table created.
    SQL> select * from temptab;
    no rows selected
    SQL> insert into temptab select * from dept;
    4 rows created.
    SQL> select * from temptab;
        DEPTNO DNAME          LOC
            10 ACCOUNTING     NEW YORK
            20 RESEARCH       DALLAS
            30 SALES          CHICAGO
            40 OPERATIONS     BOSTON
    SQL> commit;
    Commit complete.
    SQL> select * from temptab;
    no rows selected
    SQL>This is on 11106,win xp prof.
    If this i not what you have done than you want to try out XE forum.Yo may have hit a bug of it.
    Aman....

  • SAP BW 7.3: RSTRAN018 after adding attribute to an infoobject

    Hello,
    i added an attribute to an infoobject and tried to activate this. In the log messages i received the message RSTRAN018 "Generation status of transformation XY will be reset".
    I never got this message in SAP BW 7.0. Is this just a kind of information (new in Release BW 7.3) which can be ignored or does it has an impact on the transformation in which the infoobject ist used (e.g. inactivation of the transformation)?
    In general the adding of an attribute to an infoobject shouldn't affect the transformations in which the infoobject is used.
    Thank you in advance.
    Kind regards,
    Andreas

    Hello,
    You are correct this text is added to BW 7.30 (onwards I guess). The message is purely for Information purposes and the transformation should not be deactivated and will remain active/usable. This was confimed by SAP dev.
    Regards,
    Michael

  • Application Path Member will be deleted after adding a new Application Path Member in another Application Path List

    I expirienced the behaviour that the first item in the Application Path Member from a Application Path List will be deleted as far as the first item in the Application Path Member List will be selected in anather Application Path List without saving. This is according to severals peripherals as well.
    Example:
    Configuration Manager > Application Path List
    In the Application Path List "McalMediaRouting" the following Application Path Members are configured.
    For this example, the first Media Routing Domain for the Peripheral is Chat.
    Now, adding a new Application Path Member for the Application Path List "SiebelMediaRouting" with a new Media Routing Domain, which is not yet assigned to a Application Path List.
    Select the same Peripheral PG1A_CCM and choose the new MediaRouting from the list. At this point the Application Path Memeber with the Media Routing Domain "Chat" will be deleted in the Application Path List "McalMediaRouting". This will be deleted even without saving it.
    UCCE Version 9.0.2 used.
    Is this per design or is this a defect?
    Kind regards
    David

    HI
    add that fileds in the all locations where you need it like
    in internal table declaration , write statement , select statement
    these are the main areas where you have to add that 2 fileds

  • BADI ME_GUI_PO_CUST-- Data not getting saved after adding tab at Header

    Hi,
    My requirement is to add an additional tab at header level  and a field in that tab. I used the BADI  ME_GUI_PO_CUST and implemented it. I can see the tab and the field in it at header level.But when i try to save it , its popping up message 'Data is not changed' and when i check in ME22N, changes are not reflected. I went through the example and copied this example into BADI and accordingly made changes for header. When i keep break-point in TRANSPORT_FROM_MODEL and other methods except SUBSCRIBE and MAP_DYNPRO_FIELDS,its not stopping. Please guide where i am going wrong.
    Regards
    K Srinivas

    HI,
    Use the perform
    perform set_header_data(saplmepo) using ekko.
    Thanks,
    Shailaja Ainala.

Maybe you are looking for