Master Data Update to Infoobject

I have a master data 0RECONTRACT NOW if I can load this infoobject from master data source 0recontract_attr. but if i include this infoobject in the cube to be used in the report to restrict my report by contract type. What should i do in the transactional data that is coming from transactional datasource to cube. Please tell exact steps what to do in transformation or update rule when i see
this new added infoobject 0RECONTRACT  . should i set that to "initial value" or what do i have select. since i can load this infoobject as master data and use that in report so i do not have to enhance to include this in transactional data.
please help
soniya

Hi Soniya,
It depends upon your requirememt.
Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object  into the cube.
As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
Thanks
If helpful then PP.

Similar Messages

  • Is there FM that enables master data update?

    Hello
    Is there FM that allows master data update? I would llike to modify text of infoobject without data load or .
    I know its possible to make a fake update but I dont wish to do so

    HI
    Check this document :
    'How to... update Master Data during upload of transaction data', there is sample code
    https://websmp202.sap-ag.de/~sapdownload/011000358700002766042003E/HowToUplMasterDataTransact.pdf
    you may need RSDDS_ATTRIBUTES_ACTIVATE to activate data.
    Function modules for Master Data
    Regards
    Chandra Sekhar T

  • Master Data Update Report

    Hi All
    Can you please provide me a solution for the below scenario:
    At the time of master data update from BW to BPC client wants to see the updated master data reports in excel file.
    Exmp:
    Existing number of Master data (IDs) before BW update : 1000
    Today : I updated the master data into bpc from BW:10
    Now they want to generate a report for only updated recoreds that is "10" and along with this they want to see is there any changes (property values) happen with the existing master data as well and this activity should be included in the package link of master data update and a Email noticafication should be triggered to the concerned person.
    Please help me
    Regards
    Srikant

    Hi Srikant,
    I have attached the screenshots of above table.
    hope this will help,
    thanks,
    Rishi

  • Master data update bringing in multiple records for single entry

    Hello,
    I found that if I deleted and reloaded data in a master data object, it was showing me correct number of records. However, just a full update was not overwriting it with correct number of data records. there were always 1 or 2 extra blank records. I thought master data update should overwrite previous records and we need not delete and reload it.
    Why would this happen?
    Thanks!

    Hi there,
    Are you refering to time dependent master data? From to values are present?
    If so, that's the correct situation, since BW (OLAP) instead of R/3 (OLTP) allows you to mantain historical data, i.e., a material can be valid from a specific time period with several attributes and other attributes can be valid for the same material in another time space.
    Diogo.

  • Generic master data update

    hi all,
    i have created a generic data source on Z table in r/3, replicate in BW and generic data source is available in BW. i have created a infosource and want to do flexible upload into 0Material data target which is assign under Cross applicant component( flexible master data update. i can not see the infoprovider under this application component in BWD system. 0material infoprovider is availble in BWQ and BWS system. i think some one remove this characteristics as a data target. i look into business content under cross application Master data flexible update , but can not find 0 material as a data target. please some one advise me how i can go after this.
    Thank you
    Qandeel

    hi Martin,
    Thank you for your quick response. i look into RSD1 infosource with direct update check box is enable, but its not enable for the" Character is data target/infoprovider.
    i look into BWQ system 0material is enable for direct update and also a character is data target/ infoprovider. what i need to do to change the setting for 0 material and to enable this a infoprovider/ data target. some how settings get change in BWD system and its not available as a data target. please advise
    Thank you
    Qandeel

  • Loading Master Data to an InfoObject

    All,
    When loading a info provider like an ODS or Cube, there is a 'manage' option where you can see the requests that have loaded and that have failed. Where is the equivalent feature for loads to an InfoObject?  Is there one?
    Thanks in advance...

    hi nat,
    go to administration work bench (rsa1) go to info objects in context menu u can find maintain master data
    click on that u can see the master data of that infoobject.
    As master data is important we can't delete with requests
    as in ods or cube.usually developer will wont have authorization. we can edit the masterdata by reloading it
    again.
    Once u loaded master data using info package, in the monitor tab (rsmo ) u can see the status of the dataload
    green indicates successfully loaded or red indicates data not loaded properly
    hopes this clears ur doubt
    let me know
    <b>Assigning pts is the way of saying thansk in sdn</b>
    cheers
    ravi
    regards
    ravi

  • Problem deleting Master Data from an InfoObject

    Hello Everyone,
    We have 0MATERIAL infoobject. There was no Master data in the infoobject. Then, i manually entered the data into the InfoObject. After a day, i tried to delete the Master data to load it from R/3. When i tried to delete the Master data from the InfoObject, it shows errors and does not allow me to delete the data. Say, i entered 2 into material column of a record, the error appears like 'Master Data 0000002' (SID   25) is being used in /BI0/DOSH21' and cannot be deleted'. could someone please help me with this. This is a bit urgent. Let me know if you need more information.
    Thanks.

    Hi Sachin:
    Your only hope is if R/3 has the Correct Master Data, it will overwrite your Master Data. But remember for this, the KEYS have to be same because the KEYS can never be deleted in your case.
    E.g., MATERIAL, LOC (is an attribute)
    You inserted:
            000000002, TEXAS
    If, in R/3 there is infact a material with  key 000000002, FLORIDA. THis will overwrite your Record.
    If R/3 doesn't have 000000002, there is not much you can do now.
    Ram Chamarty

  • Customer master data updation from one system to another system

    HI  Experts,
    I have an issue with customer master data updation from one system to another system. And here only one field is not updating properly from one system to another system. and we found this is through idoc , but we don't find field in any segment.
    and the field is called ADDR1_DATA-HOME_CITY.
    and this will displayed as different city in address column.
    but as per the notes given in help , it is by program , form through only passing. but not able to trace and as per my analysis ADRC table , ADRNR  had this field HOME CITY.
    And this is for some customers updating wrong one from one system to another system , and for some customers field itself not updating in address column.
    please can you suggest any one. here are screenshot for your reference.

    that is not enough, it was enough in times before 40b release, but this was in the  last century
    Please read OSS note 384462 - Master data and addresses
    it explains what you have to do for ALE

  • Not able to load text master data for customer infoobject

    Hi Guys,
    I am not able  load master data text to the customer infoobject.
    I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
    I have run a repair full request(extraction from ECC) and
    i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
    I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
    Please post your suggestions.
    Thanks in advance
    Regards,
    Siva

    Hi Ramanjaneyulu,
    Transferrules screen shot:-
    update rules
    Regards,
    Siva

  • Loading master data from another infoObject (generate export datasource)

    Hi All,
    We are using a 0MATERIAL that is loaded every day, and we would like to use another infoObject that contains data updated every end of last month (and ont daily).
    For instance, on 15th april, we would like use data from 31th march and not 15th april.
    We saw that we could use "Generate export datasourse" from 0MATERIAL to the nex infoObject.
    1) Is there the best solution?
    2) If yes, could you explain us how to do this (generate export datasource), because we didn't do this?
    3) Do we do this from InfoObject (0MATERIAL) or Infosource?
    Thank you.
    Edited by: Radjech Radjech on May 11, 2009 10:44 AM

    Hi,
    Check : [Generating the Master Data Export DataSource|http://help.sap.com/saphelp_nw04/helpdata/EN/11/1a5038d2c1ba03e10000009b38f8cf/frameset.htm] to generate export datasouce.
    If MATERIAL is time dependent data then, Use To Date field as selection(31st March) to load data into new infoobject. Restict at infopackage level.
    Srini

  • Master data update and navigational attrivute

    Hi.
    There is master data which is having some 10 attributes.All of them marked as a Navigational Attribute.But all the attributes are coming from R/3 and only last attribute(X) is not coming from R/3.This X is maintained in flat file.My questions are
    1.After uploading all the remaing attributes from R/3 can we update the X through Flat file by creating sperate Infopackage and un mapping remaing objects.
    2.Here there is no Hierachy.All the attributes are marked as a navigational attributes.So, Is there any question of drilling down on a particualar Attribute like organizational Unit,or Station or plant.
    When we said all as navigational attributes we can make all the drill down and drill across operations on all of them corrrect??
    It is very Urgent.

    hi Vasu,
    say you have master data infoobject ziobjmst, you can try
    - make ziobjmst 'as infoprovider', rsa1->infoprovider->insert characteristic as infoprovider
    - create infosource with flexible update, e.g zisX put infoobject ziobjmst and X in transfer structure, assign with flat file datasource.
    - create update rules for ziobjmst from rsa1->infoprovider, assign with infosource zisX, assign ziobjmst with ziobjmst and X with X, let other infoobjects as 'no update'.
    - create infopackage and upload data.
    another way as mentioned by Vikash with look up from table A (e.g infoobject is A), you can create start routine in transfer rules and put code
    data : it_A like /bic/pA occurs 0 with header line.
    p is attribute table
    select * from /bic/pA into table it_A.
    then create routine for X in transfer rules, code
    result = ''.
    read table it_A with key /bic/A = tran_structure-/bic/A binary search.
    if sy-subrc = 0.
    result = it_A-/bic/X.
    endif.
    hope this helps.

  • Master data updation not reflected in Bex report

    Hi,
    There is a field "Approver" in a report. It will only show the name of the Approver. And recently the same approver name has been changed in MDM system and now the problem is newly changed name is not reflecting the reporting. It shows the only old name in reporting.
    My doubt is, what about already loaded record in BW system. Whether changes will be made for the older data. I mean it is possible to overwrite the approver name stored earlier in BW.
    D Raj

    Hi
    Yes, master is always overwritten.
    load the new value to the  approver Info object.
    in RSA1 -> right click --> activate master data.
    Initially when data loaded, records will be Modified version. when you perform activate master data then M versions records will turn to A version.
    records with A version are only visible in Report.
    If your report is on Aggregates, then you have to perform ACR (attribute change run) to update the same new value in aggregate.
    you can use the program RSDDS_AGGREGATES_MAINTAIN.
    Regards,
    Venkatesh

  • Production orders: Master data updating

    Hi everyone,
    This is my scenario:
    I had created hundreds of production orders with a previously defined BOM and routing. Now both the BOM and the Routing have been modified.
    I was wondering if there's any way for updating the master data in all the former production orders without doing it explicitely accessing one by one.
    Points will be rewarded.
    Thanks and best regards.
    Ben.

    Dear ,
    I hope you can do it by Mass processing of  Production .
      Logistics ---Production -- Production Control  Control --- COHV Mass Processing to go to the Mass Processing Production Orders screen
    Transaction Code :
    COHVOMPP
    Here u have to capacity and availability check for all the orders.Now u can include the function in the Mass processing tabe page in COHVOMPP ok  and also set the error log.Once u have executed a list of PO will be displaed and u have select all of them and hit the mass procesing button.
    2.In case your order beyond the shop fllor ,u can do it through Order Change Management 
    3.Or U can perform Read PP Master Data in the CO02 --Function tab  which will ask u to include your BOM/Routing.
    Hope it will help u to clear ur idea.
    Reward point if useful
    Regards
    Jia

  • Master data updated or not

    Hi.. If there are millions of records then how do we verify if master data is completel loaded or not ? Is there any mechanism to do so ?

    Hi,
    Corss checking number of records in R/3 and BW is one way to achieve .
    There is a mechanism in the info package -> Update tab page -> Make sure that radio button always udpate transaction data even if no master data exists is checked. This will make sure that all data has been loaded correctly.
    Hope that helps.
    Regards
    Mr Kapadia

  • Master data update

    Hi Experts,
    we have a process chain in which there is an abap program which updates data to master data for that info object, to which also there is a compounding attribute, which also gets filled thru abap prog.
    Data is coming to P table of the master data, but it is not shown in the Maintain master data
    In the process chain we have used attribute change run after the master data load thru abap prog and ran but still it is the same
    Please give your suggestion how to handle this.
    Regards
    Sudha

    Hi,
    you should consider using those FM/BAPI. This ensures correct handling of data. Try to make a trace while maintaining masterdata and you will see what tables will be updated.

Maybe you are looking for