Master data upload to DSO
Dear all,
We have a legacy system to maintain and face a problem.
The system have two DSO,one(DSO_04) is store the transaction data(Navigation atrribute link to master
data),Due to to accelerate the report on DSO,we build other DSO that is store the transaction data
from DSO_04->DSO_06 and change the DSO_04 navigation atrribute to DSO_06 data fields.
Problem: When user modify the master data and upload to BW,the DSO_06 isn't show the modify
report,beacause the "change the navigation atrribute to data fields in DSO_06 ".One way to solve this
problem is reload data from DSO_04->DSO_06 , but user would updata the master data frequently ,so
it isn't a good method.
Could you give me some advices to solve this problem?
Hi,
While loading the data into first DSO maintain one more field called Update Date( as current date). Do full load from DSO1 to DSO2 using DTP filter on Modified date.
In DTP filter write a small code to filter data for current date as follows :
l_t_range-sign = 'I'.
l_t_range-option = 'EQ'.
l_t_range-low = sy-datum.
l_t_range-fieldname = '/BIC/YNV_CH014'. " Updation date
APPEND l_t_range.
p_subrc = 0.
hope it works...
regards,
Raju
Similar Messages
-
Master data upload into SAP system
Hello,
I want to know if there is any standard method to upload material master, customer master, vendor master and finance master data into SAP system.
I am not referring to LSMW's, BDC's and using BAPI's. I am aware of standard programs like RMDATIND for material master upload, RFBIDE00 for customer master upload and RFBIKR00 for vendor master upload. But these are using direct input method and SAP recommends this only for testing purpose. I am not sure if this could be really used in actual live scenarios.
From some other posts in the forum, I came to know about some transactions like BDLR, SXDB and BMVO. Can some one tell me how to use these T.Codes?
If some one has any detailed documentation on these T.codes or in general standard master data upload techniques please send it to [email protected]
Thanks in advance,
CMVHi,
Define the following attributes, using the F4 input help and F1 field help:
Report
Name of a registered program for this program type
Variant
You can only specify a variant with programs that are started directly.
With direct input, data from the data transfer file undergoes the same checks as with the online transaction and is then transferred directly into the SAP System. The database is updated directly with the transferred data.
For the documentation of other transactions please refer the correponding program documentation..which is more helpful,
<b>Reward points if helpful,</b>
Regards,
jinesh -
FI Master data upload sequence
Experts,
Please excuse me if my post sounds vague. I am a Technical Consultant working off-site independently. I couldn't think of a better forum to get functional advice.
Please look at the below list of FI Master data upload objects, and suggest:
a. the recommended sequence in which the objects are to be uploaded
b. points to consider/tips for uploading/recommendations (LSMW/BUS*/BAPIs, etc)
FI Objects:
1. Cost Centers
2. Profit Centers
3. GL Accounts- COA,CC
4. Fixed Assets
5. Bank Data
6. Cost Elements
7. Activity Groups
8. Activity Types
9. Activity Prices
Thanks in advance.
NWHi,
we have to upload first the Master such as G/l Accounts , Primary Cost Elements & Secondary cost elements.then upload the open items , then p/l balances, then B/S balances , finally asset master with balances
Pre-Check LSMW: To-Do-List Before Using the Tool
The LSM Workbench is a tool that supports the transfer of data from non-SAP systems to R/3. Basic functionality of the LSM Workbench:
1. Import old data from spreadsheet tables or sequential files.
2. Convert the data from source format into target format.
3. Import the data into R/3.
Before using the LSM Workbench, you need a concept for data migration. In particular, note the following items:
· Make sure that R/3 customizing is complete.
· Analyze the data existing in the legacy system to determine which data will be needed in the future (also from a business-operational point of view).
· Consider whether usage of the tool makes sense with regard to the data volumes to be transferred. In case of very small data quantities, it may be easier to carry out the transfer manually. With very large data volumes, however, batch input technology may lead to excessively long runtimes. Rough estimate for the required time: 10000 records per hour; this value, however, may vary strongly depending on the hardware.
· Identify the transaction(s) in R/3 you want to use for bringing the data into the SAP System. Here, it may also be relevant whether the data is required for statistical (evaluation) purposes or for further processing in the system.
· Test the relevant transaction in R/3 manually with test data from the old system and make sure that all required fields are filled. There may be required fields that do not correspond to any data window in the legacy system. In such a case, assigning a fixed value or defining the field as optional for data transfer may be appropriate.
· Check the interfaces provided by the application. Is there a batch input program and an IDoc (for example)? Which method should be used in your project?
· Develop a mapping plan in written form: Assign the legacy system fields to the R/3 fields.
· Determine the form (e.g. via u201EMOVEu201C or assigned according to a rule) in which the legacy system data shall be transferred to the SAP System.
· If applicable, define the allocation rules (LSM-internal name: u201Etranslation rulesu201C).
· Define the way for extracting the data from the legacy system. (Note: LSMW does not extract data.)
· Describe the form in which the old data are available: Will the host or the spreadsheet interface of the LSMW have to be used?
· If only a part of your legacy system will be replaced by R/3, define the functionalities to be provided by the SAP System and those to be provided by the legacy system. If required, create a concept of the data flows and interface architecture.
These questions can only be answered individually for every customer; as a matter of course, this should be done before the tool is used!
SKS -
Hi All,
I am doing the HR master data upload, I found one idoc HRMD_A but i am unable to find the infotypes PA2001,PA2002,PA2010,PA2012 in this idoc type.
Could you please let me know in which type i can get all inoftypes including these .
Thanks,
SatheeshCheck these threads.
Need ur helps on - HR master data upload Thru LSMW
about HR data upload -
Hi experts,
Please help me to get the sequence for master data upload in sap pm ......Probably yet another Blog/Document for someone to create..
Here's my offerings:
Finance data: chart of accounts, g/l accounts cost centres, profit centres, activity types, etc
Configuration data
Classes/characteristics
Inspection characteristics
Master Warranties/Permits/Partners/Documents
HR masters
Work centres
Materials
Functional locations
Equipment (serial numbers)
Measurement points/documents
BOMs
Task Lists
Maintenance items/plans
Maintenance plan schedule
Historical orders (if required)
Historical notifications (if required)
Historical Measurement documents (if required)
PeteA -
Problems in master data upload
Hi all,
What r the problem we will face in master data upload?
Plz explain this as very urgent.
Thanks in advance
VenkatHi Venkat,
My suugestion is Before Posting a new Post Please close u r previous threads if u r satisfied...
Then everone will be interested to answer to u r queries..
Regards,
Sridhar -
New SAP Tools for faster Master Data Upload?
Hi All!
I am interested in getting some detailed information on different tools that are used for faster master data upload. Please let me know about the tools apart from LSMW, BAPI, eCATT and BDC.
We basically want to know the following things:
1.Which are the tools available for this master data upload?
for eg. SAP MDM, Info Shuttle, other available new age tools etc........
2. Their performance / feature comparions?
Please provide performance / feature comparison for different new age tools in detail.
Thanking you in advance.
Regards,Hi Amar,
regarding SAP MDM you can read advantages and characteristics here: http://www.sap.com/platform/netweaver/components/mdm/index.epx
Hope this help you,
Vito -
Master data Uploading using QTP
Can any one explain detail about QTP master data uploading.If possible send me the materials abt QTP uploding.
Hi
You won't get ready made template.
You have to prepare the layout according to your requirements.
First check it with the business requirements, and make note of the details and find the relevant fields in the relevant tables of the master data.
Prepare the layout as below:
Say your doing for the Chart of accounts load - Table is SKA1 - take the important fields technical name, character type and length of the field. Enter the data and save it in the desired format.
VVR -
Hi friends,
1.Please send me the prerequisites for HR Master Data Uploading?
2.Also tell me is it mandatory to create the jobs and positions, on OM?, If no what is the option?
since we have to use the imp. Infotype Org Assignt 0001>position field. We have 133 positions and jobs. how to do it?
Please reply.
Thanks,
milindsHi Milind,
1.Please send me the prerequisites for HR Master Data Uploading?
>>You need to first understand what all data need to be uploaded i.e. which all infotype you will be maintaining for the master data.
Then the second step is to identifying the fields for different infotypes, so while doing this you can create the template for each infotype. Along with this you also need to understand the source data means will it get directly uploaded or do any translation logic is required.
After this you can create LSMW's or BDC program.
2.Also tell me is it mandatory to create the jobs and positions, on OM?, If no what is the option?
since we have to use the imp. Infotype Org Assignt 0001>position field. We have 133 positions and jobs. how to do it?
>>If you want authoraizations and workflows for approvals. also if FI is integrated then its always best to have positions, organizational units, cost centers in place and the rellevant relationships between the objects.
You can create BDC using TCODE PP02 for creating positions, Jobs and their relationships.
Regards,
gusd -
Profit center and cost center master data upload errors
Hi Sapiens,
Could you please guide me to resolve the below errors in profit center and cost cost center master data upload through LSMW. i am usinng recording method for upload and getting below error while uploading the data from txt file.
1. Valid from and to dates are not converting in DDMMYYYY format, which field type we have to use in field mapping?
2. some of the fields data are overlapping when uploading the data.
3. How to create validation for empty cells data.
thank in advance.
regards,
jagadeesh.Hi
when you are using LSMW for uploading PC & CC, simple way to correct the Error's WHILE RECORDING The First record, while Creating LSMW, B very care full while entering the details ,bez wht ever Fields your updating ..the same Fields get updated While LSMW Processed.
As mentioned above update the vaild from and to date in wht ever format you want While recording, in the same format all the remaining records gets updated..
Hope the suggections will Help you in solving your Issues.
Thanks
Goutam
Edited by: Goutam78 on Apr 29, 2011 8:59 PM -
Function module Vs BDC for master data upload
Hi ,
Please advice we should use the following function modules for master data upload or we should go for BDC.
MP_RFC_SINGLE_CREATE
MP_RFC_INACT_CHANGE
MPLAN_CREATE
MPLAN_CHANGE
MPLAN_SET_DELETION_INDICATOR
ASSET_MASTERRECORD_MAINTENANCE
MPLAN_ITEM_CREATE
MPLAN_ITEM_CHANGE
GL_ACCT_MASTER_SAVE
GL_ACCT_MASTER_SAVE
GL_ACCT_MASTER_SAVE
Actually, we have already used these function modules in our upload program, but we are not sure if these function modules will create any data inconsistency.
Please let me know, if we should continue using the FMs, or there is any risk using the FMs and we should replace them by BDC.
Thanks in advance.HI Vikram,
Better to serch for the BAPI for uploading the master data.Becuase we have problems with BDC and FM's.
If you use FM's it does n't contain all the fields which you want.IF you go for BDC this is not maintainable for future releaseas.IF you upgrade then screen may change.
IF don' have any BAPI then better go for BDC.
Thanks -
LSMW used only for master data upload?
Hi
Can you please let me know if LSMW is used only for master data upload or we can also use it for transaction data ?Hi Christino.
I have come across a standard SDN thread which deals with the uploading master data, refer it:
[SDN Reference for uploading master data using LSMW|how can we upload master data by using LSMW;
[SDN reference for which uploading is preferred (Master data or Transaction data)|Which one is better for uploading data LSMW or ECATT ?;
Good Luck & Regards.
HARSH -
Loading Master Data into a DSO
Hi Experts,
I am unable to analyse whether loading data from Master Data InfoObject into a DSO will cause performance issues or will that work fine.
I was trying to do the same. Awaiting for your inputs on that.
Thanks,
VijayLatha,
Loading master data into a DSO can be done using the following steps:
1) Right click on the DSO and select Create transformation... option.
2) In the dialog box that appears, select Object Type as InfoObject and in the text box right below you give the name of the object.
3) In Subtype of Object selection, select attribute or text as per your needs.
4) select ok and you should see the transformation, map and activate the transformation.
5) create DTP and run it.
Hope this helps, [ you got my name wrong im vijay] -
I couldnu0092t load master data into a DSO
Hi,
I need some help!!
Iam trying to load master data to a DSO, but I dont find the way to do it.
Particularly, I want to fill a field of my DSO with an attribute of an InfoObject (that is also a key field of the DSO).
I create a transformation rule that connect my DSO with my transactional extractor; this rule fills all the fields, with the exception of which it is had to be complete with the attribute of this infoObject. The infoObject has his own transformation rules, which connect this master data characteristic with a M. T. extractor.
This DSO will be used only as a data warehouse that provides data to another system.
How I could load this attribute to my DSO? Anyones knows the steps to do it?
Thanks in advances for any kind of help.
Best regards
Juan ManuelHi Voodi,
Yes, I have de BI 7. 0 version.
I will comment my situation. My DSO has three key fields (society, number of doc. and schedule line), one of these is my master infoObject (the number of document). This InfoObject has an attribute (the people who enter de document), which I couldnt load it using my transactional extractor because it doesn'tt have the R/3 field in the extractor. Thats why; I decided to load it using master data.
First I charge my DSO with the master InfoObject and his attribute, using a transformation rule that connect my infoprovider with de master IO data table.
Then I charge the rest of the DSO fields, including again the master infoObjeto data field. In this case, I used a transformation rule that connect my infoProviders with a transactional extractor.
After this, when I want to execute the activation of both request, I couldnt do it because the system dont let me.
The way I do all what I says, is correct? When I am modeling the data transfer process, I have to consider something in particular?
When I want to load the master data to the DSO, I consider only one of the key fields of the DSO (number of doc); there is any problem if I dont consider the others two key fields.
Thanks in advances,
Juan Manuel -
Query in customer master data upload ....?
Hi Guru's,
I am uploading the customer master data from presentaion server to customer tables using functional module SD_CUSTOMER_MAINTAIN_ALL.
while check the Function module separatly and it working properley and i am able to ctere customer...
and i am using the same function module in the program i am unable to upload ..could please check and let me know where i am doing mistake in the below program logis..and values also moving properly before calling function module..while calling the functinal module the controle comming out of the loop and program went to dump i am able to see the message in dump as like this(it may helpfull for resolve):
Name of function module...............: "SD_CUSTOMER_MAINTAIN_ALL"
Name of formal parameter..............: "O_KNA1"
Technical type of actual parameter....: "C"
Technical length of actual parameter..: 20 bytes
Technical type of formal parameter....: "u"
Technical length of formal parameter..: 3634 bytes
Name of formal parameter at caller....: "O_KNA1"
*& Report ZERP_CUSTOMER_CREATE_UPLOAD
REPORT zerp_customer_create_upload.
PARAMETERS:p_files TYPE string.
*DATA :xkunnr(10) LIKE kna1-kunnr. "unique KUNNR
DATA: gs_i_kna1 TYPE kna1,
gs_i_knb1 TYPE knb1,
gs_i_knvv TYPE knvv,
gs_return TYPE bapireturn1,
gs_i_bapiaddr1 TYPE bapiaddr1,
gt_t_xknvi TYPE STANDARD TABLE OF fknvi,
gwa_t_xknvi TYPE fknvi,
gt_t_xknbk TYPE STANDARD TABLE OF fknbk,
gwa_t_xknbk TYPE fknbk,
gt_t_yknvp TYPE STANDARD TABLE OF fknvp,
gwa_t_xknvp TYPE fknvp.
TYPES:BEGIN OF gty_itab1,
abc(305),
END OF gty_itab1.
DATA: gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
gwa_itab1 TYPE gty_itab1.
TYPES :BEGIN OF gty_itab2,
ktokd(4), "customer account grp kna1
kunnr(10), "customer kna1
name1(35), "name1 kna1
sortl(10), "sort filed kna1
stras(35), "house number and adres kna1
pstlz(10), "postal code kna1
ort01(35), "city kna1
land1(3), "country kna1
telf1(16), "tele phone no kna1
telfx(31), "fax num kna1
kukla(2), "cust classificaion kna1
bukrs(4), "company code knb1
akont(10), "reconcilation acct knb1
vkorg(4), "sales org knvv
vtweg(2), "distr chan knvv
spart(2), "division knvv
zterm(4), "terms of payment knvv
bzirk(6), "sales district knvv
vkbur(4), "sales office knvv
vkgrp(3), "sales grp knvv
kdgrp(2), "cust grp knvv
waers(5), "currency knvv
konda(2), "price grp knvv
kalks(1), "pricing procedure assign knvv
lprio(2), "delivery plant knvv
vsbed(2), "shipping conditions knvv
vwerk(4), "delivering plant knvv
inco1(3), "inco1 knvv
inco2(28), "inco2 knvv
kkber(4), "cred control area knvv
ktgrd(2), "acc assgn grp knvv
taxkd(1), "tax classification 4 cust knvi
bankn(18), "bank account number knbk -
xkunnr(10),
END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
gwa_itab2 TYPE gty_itab2.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_files
filetype = 'ASC'
TABLES
data_tab = gt_itab1
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_itab1 INTO gwa_itab1.
gwa_itab2 = gwa_itab1-abc(305).
APPEND gwa_itab2 TO gt_itab2.
ENDLOOP.
LOOP AT gt_itab2 INTO gwa_itab2.
SPLIT gwa_itab2 AT ',' INTO gwa_itab2-ktokd
gwa_itab2-kunnr
gwa_itab2-name1 gwa_itab2-sortl
gwa_itab2-stras gwa_itab2-pstlz
gwa_itab2-ort01 gwa_itab2-land1
gwa_itab2-telf1 gwa_itab2-telfx
gwa_itab2-kukla gwa_itab2-bukrs
gwa_itab2-akont gwa_itab2-vkorg
gwa_itab2-vtweg gwa_itab2-spart
gwa_itab2-zterm gwa_itab2-bzirk
gwa_itab2-vkbur gwa_itab2-vkgrp
gwa_itab2-kdgrp gwa_itab2-waers
gwa_itab2-konda gwa_itab2-kalks
gwa_itab2-lprio gwa_itab2-vsbed
gwa_itab2-vwerk gwa_itab2-inco1
gwa_itab2-inco2 gwa_itab2-kkber
gwa_itab2-ktgrd
gwa_itab2-taxkd
gwa_itab2-bankn.
*moving files values from ITAB2 work area to global structure related to FM.
gs_i_kna1-ktokd = gwa_itab2-ktokd.
gs_i_kna1-kunnr = gwa_itab2-kunnr.
gs_i_kna1-name1 = gwa_itab2-name1.
gs_i_kna1-sortl = gwa_itab2-sortl.
gs_i_kna1-stras = gwa_itab2-stras.
gs_i_kna1-pstlz = gwa_itab2-pstlz.
gs_i_kna1-ort01 = gwa_itab2-ort01.
gs_i_kna1-regio = gwa_itab2-land1.
gs_i_kna1-telf1 = gwa_itab2-telf1.
gs_i_kna1-telfx = gwa_itab2-telfx.
gs_i_kna1-kukla = gwa_itab2-kukla.
gs_i_knb1-bukrs = gwa_itab2-bukrs.
gs_i_knb1-akont = gwa_itab2-akont.
*I FOR GOT TO INCLUDE THE ZTERM VALUE IN EXCELL SHEET SO INCLUDED HARD CODE HERE
gs_i_knb1-zterm = '0001'.
gs_i_knvv-vkorg = gwa_itab2-vkorg.
gs_i_knvv-vtweg = gwa_itab2-vtweg.
gs_i_knvv-spart = gwa_itab2-spart.
gs_i_knvv-zterm = gwa_itab2-zterm.
gs_i_knvv-bzirk = gwa_itab2-bzirk.
gs_i_knvv-vkbur = gwa_itab2-vkbur.
gs_i_knvv-vkgrp = gwa_itab2-vkgrp.
gs_i_knvv-kdgrp = gwa_itab2-kdgrp.
gs_i_knvv-waers = gwa_itab2-waers.
gs_i_knvv-konda = gwa_itab2-konda.
gs_i_knvv-kalks = gwa_itab2-kalks.
gs_i_knvv-lprio = '02'. "gwa_itab2-lprio.
gs_i_knvv-vsbed = gwa_itab2-vsbed.
gs_i_knvv-vwerk = gwa_itab2-vwerk.
gs_i_knvv-inco1 = gwa_itab2-inco1.
gs_i_knvv-inco2 = gwa_itab2-inco2.
gs_i_knvv-kkber = gwa_itab2-kkber.
gs_i_knvv-ktgrd = gwa_itab2-ktgrd.
gwa_t_xknvi-tatyp = 'UTXJ'. "HARD CODE
gwa_t_xknvi-aland = 'US'. "HARD CODED
gwa_t_xknvi-kz = '0'. "HADR CODE
gwa_t_xknvi-taxkd = '0'. "gwa_itab2-taxkd.
APPEND gwa_t_xknvi TO gt_t_xknvi.
gwa_t_xknbk-bankn = gwa_itab2-bankn.
APPEND gwa_t_xknbk TO gt_t_xknbk.
gs_i_knb1-lockb = 'X'.
gs_i_knvv-kzazu = 'X'.
gs_i_knvv-kztlf = 'X'.
gs_i_knvv-perfk = 'X'.
gs_i_knvv-prfre = 'X'.
gs_i_kna1-spras = 'EN'.
CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
EXPORTING
i_kna1 = gs_i_kna1
i_knb1 = gs_i_knb1
i_knvv = gs_i_knvv
I_BAPIADDR1 =
I_BAPIADDR2 =
I_MAINTAIN_ADDRESS_BY_KNA1 = ' '
I_KNB1_REFERENCE = ' '
I_FORCE_EXTERNAL_NUMBER_RANGE = ' '
I_NO_BANK_MASTER_UPDATE = ' '
I_CUSTOMER_IS_CONSUMER = ' '
I_RAISE_NO_BTE = ' '
PI_POSTFLAG = ' '
PI_CAM_CHANGED = ' '
PI_ADD_ON_DATA =
I_FROM_CUSTOMERMASTER = ' '
IMPORTING
e_kunnr = xkunnr
o_kna1 = xkunnr
E_SD_CUST_1321_DONE =
TABLES
T_XKNAS =
t_xknbk = gt_t_xknbk
T_XKNB5 =
T_XKNEX =
T_XKNVA =
T_XKNVD =
t_xknvi = gt_t_xknvi
T_XKNVK =
T_XKNVL =
T_XKNVP =
T_XKNZA =
T_YKNAS =
T_YKNBK =
T_YKNB5 =
T_YKNEX =
T_YKNVA =
T_YKNVD =
T_YKNVI =
T_YKNVK =
T_YKNVL =
t_yknvp = gt_t_yknvp
T_YKNZA =
T_UPD_TXT =
EXCEPTIONS
client_error = 1
kna1_incomplete = 2
knb1_incomplete = 3
knb5_incomplete = 4
knvv_incomplete = 5
kunnr_not_unique = 6
sales_area_not_unique = 7
sales_area_not_valid = 8
insert_update_conflict = 9
number_assignment_error = 10
number_not_in_range = 11
number_range_not_extern = 12
number_range_not_intern = 13
account_group_not_valid = 14
parnr_invalid = 15
bank_address_invalid = 16
tax_data_not_valid = 17
no_authority = 18
company_code_not_unique = 19
dunning_data_not_valid = 20
knb1_reference_invalid = 21
cam_error = 22
OTHERS = 23.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc EQ 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error Message:', 'error in creation'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'costomer', gwa_itab2-kunnr, 'created'.
ENDIF.
ENDLOOP.please let me know if my qestion is not clear...
and please cinfirm me ..that can i use the function module (SD_CUSTOMER_MAINTAIN_ALL) instead of BAPI (BAPI_CUSTOMER_CREATEFROMDATA1) for uploading customer master data.
please respond me ASAP.
thanks in advance and will give full points
thanks®ards
Srinivas.
Maybe you are looking for
-
How do I use an external hard drive on Mac and Windows?
How do I format an external HD for use on Mac and Windows? She has two laptops and have to use both.
-
How can I get my Mac laptop FCPX Events Library to see my external drives? Yes it is formatted Mac-OS-Extended (Journaled).
-
No english text in itunes store
i have downloaded itunes 7.0.1 from the web, installing it with the us english as the language. the itunes works ok but when i open the store it comes up as a combination of japanese and just squares and i cant find where to change this does anyone k
-
Hi Guys How is it possible to compare CLOBs (as a column data) coming in query result and further filter the same query to excluding the excatly similar CLOBs. Cheers Shabar Edited by: shabar on Jun 15, 2011 12:47 AM
-
More Newbie help needed please.
Hello, I am attempting to sort an array which is defined in the main method, but the array must be sorted through the use of another method. From my understanding, this is tricky, because as I found out last night, you cannot use another method from