Master data values in Query

Hello,
i want to restrict division by certain value in a query. i cannot see one of such values in the restriction window in the available list of values.
i checked master records for division and it has this value. the infoprovider may not have this value.
in the 0division infoobject the settings in the business explorer tab are:
Query Def. Filter Value Selection: M Values in master data table.
Query Execution Filter Val. Selectn:M Values in master data table.
Why can't i see the value in the query for restriction?
thanks

Hi Aby,
<i>Have you tried clicking on the "display other values" button right before the find text box in the restriction window (the one with the small yellow arrow)? If not, then click on tht button and put in some restriction rule to cut down on the number of entries displayed. This should display the value you desire.</i>
In addtion to that uncheck 'only values from InfoProvider'
regards

Similar Messages

  • Hierarchy node Variable: F4 Help - Not showing Master data values

    Hi,
    We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
    In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
    I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
    Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
    There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
    Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
    Thanks in advance for your help.
    Regards,
    Femmie.

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • Check on Master Data Value (User Manual Input)

    Hi all,
    i have the following situation:
    User has to insert a set of Characteristic Value (these are not limited in level for any value nor variable) to be able to enter layout and does manual planning, with my great astonishment i have noticed that BPS does not do any check on the master data value inserted by the user, for example if user insert value '1' for 0payscalety CH instead of '01' the system does not give any error message and goes directly to perforate the Master Data with this wrong value.
    Does exist any setting/tip to avoid this unpleasant situation?
    Many thanks in advance
    Fabio

    Hello Fabio,
    personal I would not set up a data model, which makes differences between 01 and 1. It is known that this will make always problems in the future.
    I believe it is quite more unpleasant that SAP does not provide detailed documentation...
    You can use e. g.
    - conversion routine in BW char.
    - message, fox
    - char. rel. and / or ABAP
    - drop down list which does not allow manual input
    to manipulate before / after input. These are some of those possibilities, which SAP provides.
    regards
    Eckhard
    Message was edited by: Eckhard Lewin
    Message was edited by: Eckhard Lewin
    Message was edited by: Eckhard Lewin

  • Read document attached to master data value

    Hello.
    I'm using FM RSOD_DOC_MAST_CHANGE to attach files to master data values. But I don't know how to read attached document((  Does anybody know?

    Hi.
    Take a look at [following thread|Document read functionality;.
    Regards.

  • Showing master data value in report for which no record in Infoprovider

    Hi,
    We have the following reporting requirement. The master data values , e.g. 0Customer should appear in the report for which no sales has taken place, i.e no record in Infocube.
    We have defined a multicube using Infoprovider & 0Customer Infoobject, but the report seems to show only values from InfoCube, not the values which are not there in infoprovider but are present in infoobject.
    Please suggest.
    Thanks & Regards
    Madhu
    00919830957798

    Madhu,
    There is a how to paper on how to do this. It available in the BW InfoIndex under Multiproviders and is called Slow Moving Inventory Scenario.
    https://service.sap.com/~sapidb/011000358700008387152002
    This document details out the process of reporting on master data values for which no transactions ahve been recorded. This is achieved by creating a MultiProvider on a Cube and InfoObject and then using teh record count property.
    Cheers
    Aneesh

  • All master data values not shown in query selections

    Hi
    I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
    I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
    As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
    Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
    Then I deleted the contents of the InfoCube. It still shows the original 25 values.
    The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
    The problem is the same in LISTCUBE
    I hope some of you can help we with this.
    Thanks
    /Karsten

    Hi Hari
    1) Reactivated the master data, said it was already active.
    2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
    I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
    I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
    Thanks for all the input guys.
    /Karsten

  • Query says master data value is invalid in selection screen.

    Hi,
    I am experiencing an issue that is occurring across many reports in our BW QA system, not just one. My InfoProvider clearly contains data with plant = US33. However, when I run the report and in the selection screen I enter US33 I get the error message saying that the value US33 is invalid.
    If I open the selection box, it even shows US33 as an available option (selections are restricted to values in the infoprovider), but again if I select US33 and click ok I get the same error message saying that the value US33 is invalid.
    If I run the report open the report returns records with plant = US33. However, if I try to filter on plant US33 in the report it returns no data.
    US33 is available in the 0PLANT master data and yes the data is active. I even tried modifying this record and saving it and that didn't work. I also tried reloading the data and still nothing.
    I also tried running tests in RSRT on the 0PLANT master data but there are no errors.
    I can query data in the infoprovider successfully when I select plant = US33 in the BW.
    I suspect that since this is occurring across multiple reports that report off of different infoproviders, that this is a master data or system issue but I can't solve it.
    Please advise.
    Thanks,
    Anthony

    what is the length of 0plant .
    it should be 4 characters with lower case on.
    ensure cases are same in 0plant and report selection screen if lowercase is allowed in plant data.
    if it still gives your problem try to create a new variable on 0plant and use it.
    revert back nothing works..

  • Force read/refresh of master data attributes on query

    Hi there,
    We're having troubles with one input ready query that changes and attribute value (KYF) of one characteristic. That works fines and whe can save changed data on the infoprovider via DTP. Problem is when data is saved we need to refresh query as whe have both values on screen (original value as char attribute on rows) new value as input ready KYF, so after save we would like to see that both values are the same.
    Is there any way of force query no to read from caché as whe are changing master data attributes. I read something about IF_RSMD_RS_ACCESS class that can be implemented on Master Data access and force it there but sounds really hard so if this is the way can some of you guys give us some help.
    I hope I make myself clear on the explanation...
    Thanks in advance,
    Regards
    Carlos

    Dear All,
    The recent days that I tried working on changing master data attributes through BPS didn't work out.The Primary reasons was  that some of the attributes that I needed to change were not present in the transaction or planning cubes and the characteristics that are not part of your cube on which the planning area is based then you can not do changes on them.
    This is my undestanding .Please correct me if I am wrong.
    Besides , I was also thinking if we can do the same through portal.i.e retriving the master data infoobject ( based on the value seleceted for that infoobject by the user  )  and its attributes in the portal , edit them and save them back so that the updated values goes back to BW master data infoobject data base tables and updates the value.
    Eg . I have Natural Account master data infoobject in the BW with attributes fucntional area and expense center.Based on the user selection of any values for the Natural account lets say  01110 , then for 01110 natural account the portal should display the correspoding attributes values of fucntional area and expense center.Lets take this values as 10 , 20 respectively for fucntional area and expense center . What I want to do now is to change these attrbute values to 30 and 40  and I would like to save it back as the changed attribute values for that natural account for 01110 with new attribute values 30 & 40 respectively for fucntional area and expense center .
    Is this possible through portal and BW?
    Any idea on this would be appriciated.
    Regards,
    Ankit
    Edited by: Ankit Bhandari on Nov 21, 2008 12:21 PM
    Edited by: Ankit Bhandari on Nov 21, 2008 12:32 PM

  • Characteristic "Master Data" setting in Query definition not working?

    Hi,
    I am having a problem with a query definition. (BI 7.0)
    The query comprises the following definition which relate to displaying Milestone dates for respective projects in a time series so the dates are populated in the correct column in a time series:
    Filter
    Project Definition = Fixed Single Project Definition
    Fiscal Year Variant = K4
    Project Profit Centre = Hierarchy Node
    Project Plant = Fixed Single Value
    Free Chars
    Network
    Network Activity
    Activity Element
    Rows
    Project Plant
    Project Profit Centre (With hierarchy)
    Project Definition
    Milestone Type  (Setting in characteristic to pick up Master Data)
    CSR Relevant    (Setting in characteristic to pick up Master Data)
          Structure
               Actual
               Scheduled
        (Actual:  Value type = Actual,  Origin = Manual ,Event = Start)
        (Scheduled:  Value type = Actual,  Origin = Scheduled ,Event = Start)
    Columns
    Key Figure structure of 12 key figures in a time series
    Selection
    Key Figure = Date
    Fiscal Year/Period = Current Fiscal Year / Period (SAP EXIT) (With Offset 1 to 12)
    FYI
    When I run the above it comes back correctly. However when I add "MILESTONE" (Characteristic setting (Posted Values) to the Query Definition immediately after the "Milestone Type" and before CSR it does not work it just is hanging for a considerable time.
    I am not using "Master Data" for the "Access Type for Result Vales" for the additional characteristic "MILESTONE" just "Posted Values".
    I was expecting that it would just show all Milestone types as per Master Data but just the Milestones that are posted for this result.
    I would appreciate a solution to this issue and an explanation to why it hangs when I add the "MILESTONE" characteristic to the definition as explained above.
    Thanks in advance..
    Stevo

    Hello there,
    Putting Milestone in the rows in the query definition is not being hang there (i.e., while creating and saving the query) right?
    It is stucked while executing the query isn't it so?
    That's because you have too many records to be desaggregated by milestone characteristic, and this is indepently of posted values in the characteristic settings.
    Putting milestone characteristic in the free characteristics will allow you to run the query, but desaggregate it (add it to the rows) will be to much information to read from your dataprovider (this is just a guess).
    If it is being stucked in query execution whike milestone is in the rows. Try this for example:
    Add milestone to the free chars. Execute the query. Filter milestone characteristic while still in the free rows and choose a value that you are pretty sure has the smallest records in the Dataprovider (could be for example value #). Than drill down milestone to the rows. You'll see that it can be executed without any problem.
    Diogo.

  • Japense language getting displayed in master data not in query

    Hi all,
    I am trying to load the asset master from ecc and bw which both are unicode. But then the master data gets loaded perfectly with japanese in the master with
       asset   language   description
    1. 300001   en           加硫
    2. 300002   ja           加硫
    i can see some data is loaded with en and some with ja both are loaded in master data perfectly.
    but then in the query if i want to display 30002 it is not getting displayed
    can anyone help me on this

    Hi,
    What language you are selecting while logging into the query designer?
    Select the language as JA and then check if you can get the required result.
    Regards,
    Durgesh.

  • Extract CRM Master Data - Ad Hoc Query

    Hi,
    Does anyone know of a tool in CRM like Ad Hoc Query in HR?
    Basically I'm looking for an end user tool that allows the user to pull of Master Data. Effectively like a report but they can pick and choose the data they want it to search on.
    Any help with this would be greatly appreciated.
    <b>Points awarded for helpful responses.</b>
    Regards,
       Philip Johannesen

    Hello,
    query /SAPQUERY/HR_ADM belongs to the client independant (global area) more info you can find here: http://help.sap.com/saphelp_erp2005vp/helpdata/en/d2/cb3f6f455611d189710000e8322d00/content.htm
    I think your copy of the infoset will also belong to the global area.
    Koen

  • Incorrect result between maintain master data and bex query, how can i fix?

    Hi ALL,
    i get some messages from the users there is incorrect result between SAP R/3 and Report on BW. i controlled the monitor and i saw there was a job for 0CUSTOMER_ATTRIBUTE that it finish correctly but the processing it was only in PSA, i started the full update immediately from PSA into Data Targets and is finished correctly. after when i control the content of the 0CUSTOMER (right click maintain master data) i get the correct attribute result that match the data in SAP R/3, but the problem is when i execute a query Bex on this master data it will not return the same attributes data.
    Can SomeBody Help please
    Bilal

    hi,
    For any master data attributes loaded you will have to run "Attributes Change Run" for that.Execute for Master data 0CUSTOMER.
    The same is avilable in rsa1->Tools(top menu)->apply hierarchy/attribute run.
    hope it helps,
    regards,
    Parth.

  • Not all the master data values appear in variable dropdown

    Hi all,
    we have a BPS variable in planning folder (SEM 4.0) where we have defined a variable with 'restriction required by user'. When the uses take a drop down they don't see all the values in the dropdwon but they can still manually input the missing values.
    Any idea?
    BR,
    SSC

    Hi,
    Make sure that the navigational attribute is assigned in the cube. Same goes for the workcenter. Also make sure when you loaded master data for workcenter the data for the navigational attribute also got loaded and you activated the same.
    Cheers,
    Kedar

  • Master data values(navigational attributes) are not turning up in the cubes

    Hi all,
    I have a cube, which contains 0cust_sales as master data and i have clicked on the navigational attributes of 0cust_sales like customer grp1, 2,3,4,5 etc
    But then i have the 0cus_sales number 6100034 with all the navigational attributes turning up when i look up at the master data in the quality system.
    But then for the same customer number i can see the customer number but no navigational attributes are turning up!!
    I have activated master data and the master data contents are active!!
    Can anyone pls update me on this!!
    Thanks
    Pooja

    Hi
    It is not part of dimension only 0CUST_SALES is part of dimension,
    And ocust_sales-customer grp1, 2,3,4,5 are navigational attributes in the info cube. I have just included them as navigational attributes enabled in the info cube.
    And when i loaded the data for customer say 6111035 from the ods to the cube. I can see the data for customer 6110035 but cant see the navigational attributes getting populated.
    But when i look at the same in the master data for 0cust_sales i can see the values for the navigational attributes too!!
    Thanks
    Pooja

  • Master data  value 0 can be created?

    Hi All,
    i want to create master data with value 0  but  when i am trying to create it  i am unable to create it  and   i am getting message  "Data record with this key already exists"  but actually its not there , can anyone suggest.
    Thanks in Advance,
    Harshitha

    Hi,
    Thanks for  suggesstions, as  suggested  i have  went to edit but in the  dailog box 000 is appearing   but not in the main infoobject
    and as Hawk  told i have given <1  selection  and i got  1 st record ,
    but i wanted 0 to appear like how 1,2 ,3  records are appearing,
    is there any way we can acheive it
    Thanks in Advance,
    Harshitha

Maybe you are looking for