Master data values(navigational attributes) are not turning up in the cubes
Hi all,
I have a cube, which contains 0cust_sales as master data and i have clicked on the navigational attributes of 0cust_sales like customer grp1, 2,3,4,5 etc
But then i have the 0cus_sales number 6100034 with all the navigational attributes turning up when i look up at the master data in the quality system.
But then for the same customer number i can see the customer number but no navigational attributes are turning up!!
I have activated master data and the master data contents are active!!
Can anyone pls update me on this!!
Thanks
Pooja
Hi
It is not part of dimension only 0CUST_SALES is part of dimension,
And ocust_sales-customer grp1, 2,3,4,5 are navigational attributes in the info cube. I have just included them as navigational attributes enabled in the info cube.
And when i loaded the data for customer say 6111035 from the ods to the cube. I can see the data for customer 6110035 but cant see the navigational attributes getting populated.
But when i look at the same in the master data for 0cust_sales i can see the values for the navigational attributes too!!
Thanks
Pooja
Similar Messages
-
Master Data Attribute is not getting reflected in the Cube?
Hi All,
I have loaded the data from ODS to the cubes for customer master and it contains a lot of navigational attributes
for instance :
master data for customer in development is
customer customer group 5(nav attributes) Customer pricing group
1001 HAW IE
And hence when i load the customer 1001 from the ods to the cubes i can see the customer contains navigtional attributes for customer pricing group but CUSTOMER GROUP5 doesnt gets displayed in the cube.
I check the master data it contains the values for customer group. How to Rectify this issue?
Pls advise me!!
Thanks
Poojahi all,
I have explicity clicked on the navigational attributes in the cube i can see the values for the other navigational attributes being displayed in the cube for customer master but then only one navigational attribute is not getting displayed.
For instance
customer, customer gp2, customer grp5
100, nr, nv
only customer grp5 is not getting displayed which has values in the master data but then customer grp2 along with customer is getting displayed.
Thanks
Pooja -
Navigational Attributes are not working in Excel
Hi,
In my report output I have few navigational attributes i define when I filter the values for example Location as define Navigational attribute I am selecting Location = ABC in report after some time my excel is disconnecting?
I am thinking what would be the problem?hi randy,
i guess u have some connection problem.
u can use tcode RSRT and RSRCACHE u can use option debug to check weather any problem occurs because of navg attr.
i consider there should be some bex problem.
byebye -
Master Data and Navigational Attribute?
Expert's,
Please go through this scenerio and answer the questions?
I have master data ZSTAT for this we have mainitaned the attribute called ZATT.
The data for these is not coming from source.So there is routine in UR which manipulates and updates the ZSTAT as I,N and T based on the conditions given in the UR.But Now If I look at the attribute ZATT I could see only I and N data.How this has maintained.This had done by our onsite folks.My doubt is How did we get only two values for attibute when we are having 3 values for Master data?
Points will be definitely assigned for the right answers?
Thanks in Advance.
Vasu.Hi Core,
Here is the Code,
COMM_STRUCTURE-/BIC/ZOSS = '0001' OR
COMM_STRUCTURE-/BIC/ZOSS = '0002' OR
COMM_STRUCTURE-/BIC/ZOSS = '0003' OR
COMM_STRUCTURE-/BIC/ZOSS = '0004' OR
COMM_STRUCTURE-/BIC/ZOSS = '0005'.
result value of the routine
RESULT = 'I'.
ELSEIF
COMM_STRUCTURE-/BIC/ZOSS = '0006' OR
COMM_STRUCTURE-/BIC/ZOSS = '0007' OR
COMM_STRUCTURE-/BIC/ZOSS = '0008' OR
COMM_STRUCTURE-/BIC/ZOSS = '0009' OR
COMM_STRUCTURE-/BIC/ZOSS = '0010'.
RESULT = 'N'.
ELSEIF
COMM_STRUCTURE-/BIC/ZOSS = '0011' OR
COMM_STRUCTURE-/BIC/ZOSS = '0012' OR
COMM_STRUCTURE-/BIC/ZOSS = '0013' OR
COMM_STRUCTURE-/BIC/ZOSS = '0014' OR
COMM_STRUCTURE-/BIC/ZOSS = '0015'.
RESULT = ' T'.
ENDIF.
And in ZSTAT the values maintained are I,N and T.But in ZATT only I and N are maintained.
ie
ZSTAT -
ZATT.
I -
I
N -
N
T -
N.
For T also they have maintained as N.How could this can be done.If at all it has maintained manually How can we maintaine? -
Navigational attributes are not visible after transport
hi,
i have created five new info objects and added these to 0custome as navigational attributes,then i have switched thes on as navigational attributes in 0sold_to info object.every thing is working fine in deveopment.
when i transport these into quality, for 0customer i am able to see these new info objects as navigational but in 0sold_to these new info objects are visible as display attributes.I want tehse to be as navigational attributes..
can any one tell me where have i gone wrong..
thanks in advance..
satishHi,
The SAP Best Practice says that while transport
Request 1: Select the Necessary objects of Info Provider
Request 2: Select Data Flow before and Afterwards
if you practice this you will not miss any objects
regards
Happy Tony -
Navigational Attributes are not shown in query
Dear all,
I have a problem in a query. I need to present values using by using Navigational attribute in the query, the thing is that it does not recognize my navigational attribute. I have checked the characteristic in the Multiprovider and Infocube as navigational. And in the Multiprovider I have identified the navigational attribute from the right source.
What I think is strange is that I can see the navigational attribute when I see the data in infocube but not in the query. Does anyone knows what I might be doing wrong?
Best Regards and many thanks,
MazzzHi
plese try to find out the data for this fields through LISTCUBE,if you gets data here for that navigation attr then it has to appear in your query designer also.
and also once again check your idetification for the navigation attr in multi provider whether its taken from write souce or not.and plese chk through your cube also for the navigatin.
in cube navigational attr has to mark then in the same way in the multi provider also
mahesh
Edited by: Mahesh Kumar on Jun 2, 2008 10:47 AM -
Showing master data value in report for which no record in Infoprovider
Hi,
We have the following reporting requirement. The master data values , e.g. 0Customer should appear in the report for which no sales has taken place, i.e no record in Infocube.
We have defined a multicube using Infoprovider & 0Customer Infoobject, but the report seems to show only values from InfoCube, not the values which are not there in infoprovider but are present in infoobject.
Please suggest.
Thanks & Regards
Madhu
00919830957798Madhu,
There is a how to paper on how to do this. It available in the BW InfoIndex under Multiproviders and is called Slow Moving Inventory Scenario.
https://service.sap.com/~sapidb/011000358700008387152002
This document details out the process of reporting on master data values for which no transactions ahve been recorded. This is achieved by creating a MultiProvider on a Cube and InfoObject and then using teh record count property.
Cheers
Aneesh -
Data for navigational attributes # Not Assigned
Hello friends,
Our report is based on Multiprovider which is based on 5 cubes.
These five cubes has one particular Characteristics which hasnavigational Attribute .
We are using the navigational attribute directly under free characteristics Tab in Query.
We are also using Characteristic in Query - for characateristic data is shown in report.
In report we are able to see data as # Not Assigned for navigational attributes.
When we checked data at info object level for that characateristic, correct data is shown for that navigation attributes.
We have checked following settings
At characteristic level - Uncheck Attributes only
At cube level all navigational attributes are checked
In Multi provider identification table - This navigational attribute is checked for all five cubes
In Multi provider Navigational Attributes Tab - This naviagtional attributes is checked
Activation of Master data was done once again
we are not getting any other ideas, can any one please suggest us where the problem is?
Thanks
Tony.Hi Tony
I have the exact same problem. Did you find out what the problem was?
KR Nete
Edited by: Nete Grøn Jacobsen on Jul 14, 2008 1:51 PM
I solved my problem
1. Activate the navigation attribute(s) on the underlying basiscube, from which the query displays data
2. Choose the navigation attribute(s) for all relevant basiscubes (multicube -> Change -> Button Identification)
See also:
KR Nete -
Attributes are not displaying in Navigational Attributes area of DSO.
Hi Experts,
I have created a DSO and have included Info Objects 0SOLD_TO & 0SHIP_TO. In the Navigational Attributes area, its attributes are not getting displayed even though the attributes are in the info object.
What are the steps needed to perform for it to display there?
Waiting for your reply,
Thanks in advance,
With Kind Regards,
ShreeemHi Shreem,
If you want attributes of any master objects in navigational attributes section, you have make them navigational attributes while defining base info object.
Please follow the below steps.
1) goto RSA1, search for 0SOLD_TO & 0SHIP_TO info objects and open them
2) goto edit mode of info object and goto attributes section.
3) here you will find for every object "DIS" --- this means these attributes are display attributes.
4) If you want to change any attribute to NAV, then click on "Pencil Mark".
5) Now you can see text NAV instead of DIS for that attribute.
activate the info object and goto DSO, now you will see that attribute in navigational attribute folder.
Regards,
Venkatesh -
Hierarchy node Variable: F4 Help - Not showing Master data values
Hi,
We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
Thanks in advance for your help.
Regards,
Femmie.Hi,
Could you please share the steps you have taken to fix the problem?
We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
Any help on this would be greatly appreciated.
Thanks,
Krish -
Pricing errors are not cleared after fixing the master data
Hi All,
Kindly go through the issue explained below.
Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool.
System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined) when price(condition record) is not maintained in product. This is also fine. Now the issue is, Pricing errors are not going away from Opportunity even after the master data(product) fixed with maintaining pricing.
Scenario : Opportunity is saved with pricing errors.
Analysis : Price or/and Sales area are not maintained in Product that is maintained in Oppt. That is why this error occurs. So, we have maintained the Sales area/Price(condition record) in product. Now master data is corrected.
Expected result: After maintaining the price/sales area in product, the errors should go off from the created Opportunities and pricing should be determined properly.
Actual result: When we create a new opportunity with the same product, pricing is determined. But the errors are not going away from the already created opportunity transactions.
Please let me know if this scenario is not clear to understand.
Please help with your inputs. Thank you for your time.
Regards,
MaddyHi Luis,
Thank you very much for your reply. Could you please help me where is the button 'Redermine Pricing' available? I have checked in Opportunity transaction but failed.
Regards,
Maddy -
Navigational Attribute is not properly displaying
Hello,
We have a "Sales Group" navigational attribute YCUST_SAL-YSALE_GRP in a BW report. We have adjusted a sales group for a customer in R3 from F10 to E49 and hte same has been pulled to BW side,.
we have activated the master data manually and we are able to see the new data is available against the customer.
But when we refresh teh report, for that customer we are able to see only F10 as the sales group,.
For cross check, we have sales group display property also. where we are able to see E49.
Please let us know why we are seeing inconsistency between display and navigational attribute for a same infoobject.
Thanks. KarthikHello,
It seems Master data is not activated properly....
Whether the query is fetching data from Aggregates, if so you have to do Attribute changerun for this infoobject
goto SE38 and run this program RSDDS_AGGREGATES_MAINTAIN it will Info object name...Provide your info object and execute...
Your problem will solve.
Regards,
pavan. -
Navigation Attribut is not shown in two rows in the Query
Hello,
we are using a multiprovider with the infoobject 0material. In the multiprovider we use a navigation attribut MH_PR_ST of 0material.
Normally, the query rows should show the material number and the corresponding attribut MH_PR_ST, but in some materials in the multiprovider exist some rows where the attribute is shown correctly from the master data table and in some rows the attribute is not shown.
Therefore in the query two rows are shown:
Material No. MH_PR_ST Key Figure
4711 A 10
4711 # 5
Sum 15
With all other navigation attributs there is only 1 row.
Do you have any good ideas?
Thank you very much + best regards,
IlonaHi,
Assuming the second row comes from one of your basic cube; since it looks that 0MATERIAL is populated (it is coorectly identified), ensure that the identification of the nav 0MATERIAL__MH_PR_ST is done properly in your multiprovider.
hope this helps...
Olivier. -
Master Data Text and Attributes
Guys,
I read some posts on sdn regarding differences between master data texts and attributes and now I am a little confused. I thought attributes define a char. then what does text do? Does it not define or describe the char as well? If both are doing the same thing then why do we need both ? I am not sure if my understanding is correct. Please help me.
Thanks,
RGHi Ram,
To understand in a better way little bit of R/3 work would have been helpful.
In R/3 Every entity has master data maintained like customer, material, plant etc.
If you would see a customer in R/3 you can see it has lots of information..like address,telephone number,street company name, etc.
And along with it we have customer name...i.e. description..(text)
Now in R/3...text tables are generally maintained separately then master data tables...it can be together as well.
Something like for you Ram Goswami is descrption(text) for the user ID XXXXXXX in SDN.
Email ID and company name is the master data stored here for him.
BW has used the same modelling concept to keep the text table separate from the msater data table.
It creates to separate data target for master data and text so that two seperate tables can be maintained in BW and you have to load the data in both to see the master as well as text.
Since we have separate master data table and text table in R/3 therefore we have separate data sources as well based on them.
You would like to have you master data table exactly as the master data table of R/3 so you will add attributes in the infoobject 0customer and it will create a P table for 0customer...keep adding attributes to make the columns in the table and to make the exact copy of R/3 table i.e. to bring all the information from R/3 about customer master you add attributes in the 0customer.The data soiurce based on this table in R/3 will contain the fields from the table.
Now you do the mappings with fields between infoobject and data source and load the data ...so master data is loaded.
For text...once you check the text option in infoobject..SAP creates a new table Tcustomer in the background..
Now you have to do the mappings for this as well through the data source based on the text table in R/3.
In some cases the master data table contains text as well and in that case you use the same data source based on this table to create two separate update rules one for master data object and another one for text object and do the mappings accordingly.
In this case you schedule the load to both the target at the same time and data gets loaded.
but for different data sources you will have to schedule the load separately.
Once data loaded for this...now you can use it in the report and see the text as well as master data attributes in the reports and there values.
I hope that was more then enough
Thanks
Ajeet -
Data of different session are not getting refreshed.
We used select one choice and it is bind to the iterator. Data of different session are not getting reflected.
Problem Scenario : Two browsers are open with same screen . In browser-1, I am adding new item which display on drop down of same screen. But drop down of browser-2 is not displaying the new added value.
Please let me know how to refresh the data of browser-2 if I added data on different session.
//JSFF entry
<af:selectOneChoice binding="#{backingBeanScope.Product.ICTCSTName}"
id="iCTCSTName" simple="true"
label="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.label}"
required="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.hints.mandatory}"
value="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.inputValue}"
autoSubmit="true">
<f:selectItems value="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.items}"
binding="#{backingBeanScope.Product.si2}"
id="si2"/>
</af:selectOneChoice>
//Pagedef entry
<list IterBinding="tpCrudeSuperTypeFindAllPopulatedCTIterator"
ListOperMode="navigation"
ListIter="tpCrudeSuperTypeFindAllPopulatedCTIterator"
id="tpCrudeSuperTypeFindAllPopulatedCT" DTSupportsMRU="true">
<AttrNames>
<Item Value="superTypeName"/>
</AttrNames>
</list>Are you sure backingBeanScope is the correct scope for your scenario?
Session scope sound more appropriate to me.
binding="#{backingBeanScope.Product.si2}"
Maybe you are looking for
-
Fire Wire Error Message:
If anybody has been following my posts, I have been wanting and needing a fire wire enclosure for large hard drives. I only have one of each. A Fire Wire enclosure and a 3.5 PATA drive. A Maxtor 160gb. I have other hard drives and they are smaller, a
-
So this problem is annoying me. Is there any setting that has been added and this got messed up or is it a bug? In CS6 I could turn around my pen and use the eraser tip and change the size of it. Now in CC 2014 I can't do it. I have to manually click
-
Photo Stream in iPhoto not updating
My family has multiple iOS devices. We utilize Photo Stream. Pics on one device show up in Photo Stream on all devices. That is okay. When I open iPhoto on my MacBook, the Photo Stream doesn't contain any of the pictures from the devices. Why is
-
HTTP Receiver Adapter - Post HTTPS to non-sap system
I plan on doing an https post to a non-sap system using the http rec adapter. Will I need to make some config changes to enable ssl communication on the XI system? Will I need the certificate of the target system? Thanks, Mark
-
Where did my view, options go on 4.0
i downloaded 4.0 and can not find the tools that were located at the top left of home page like view, history,options and bookmarks where did they go. or can i just get my 3.6 back