Master does not exist for Characteristic 0Material

Hello,
I have a problem with a variable in the bex selection screen. I want to insert a value range
for the characteristic Material. The problem is, that no master data exists for this value range,
so that I can't select it in the variable screen.
Example: I want to select a value range from Material 1000 - 2000, but the master data is
between these values. 1020,1780, 1980.... .
Every time I select this range of values, I get the error message, that no master data does exist
for this characteristic.
Is there any possibility to disable the master data check for the characteristic ?

as you using the fixed value range it will verify with master data records ...i.e it permits if master data exists....try to insert these 1000,2000 records in to master data manually then you can able to use that selection in bex
bhaskar

Similar Messages

SID does not exist for Characteristic

Hi All,
We are getting SQL/SID error when we execute the query "Age inventory report by
source plant" on Material Movement Cube.
When run in RSRT in Debug mode we are getting both errors as mentioned below:
Error while reading data; navigation is possible
SQL Error: 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
or
ASID = 180 does not exist for characteristic Plant or is not selected
I>> Row: 28 Inc: MESSAGE Prog: CL_RSR_BASE
sometime the workbook runs fine without errors which uses the same
query. but this is not often. when we run the query it shows SID error.
I can mail the screen shots if needed,
This is the Relpy from SAP:
          This kind of issue is often lead by overflow in the kefygures used in query.
          I could verify that query RIC_C03_ZQ06B_DETAIL_SOURCE01 is calculating ahuge amount of data.
          It is a common issue in this situation.
           Kindly check attached notes for extending key figures.
           460652 Extending key figures in BW
           579342 Changing key figures used in InfoProviders
Just want to know if they are relevant, since most of the columns are Restricted KF or Formulas.
We just have few keyfigures.
Has anyone comeaccross such error, Plz suggest any actions.
Thanks,
Jo
Edited by: Joseph Mundru on Jun 25, 2008 11:00 AM

Hi,
Check for any customer exit or SAP exit variable in the query...
Hope this helps....
Rgs,
Ravikanth

Value does not exist for "..." in connection...

Hello,
I have following issue using Design Studio 1.3.
I was changed my source of dashboard from universe to Bex Query.
When it was done I have received following Script Problem related to CheckBox
Description
Location
Event Script
Component
Application
Type
Value "Sourcable" does not exist for "GP_XSRCB" in connection "cuid:AdpcHfZ9h0VKrXD0XhomzOs"
Line 3
On Click
CHECKBOX_1
[rkams1157] S2P_PROTOTYPE_MDM_001-002 - dev
Design Studio Script Problem
Below please find the Script syntax:
if(CHECKBOX_1.isChecked())
DS_2.setFilter("GP_XSRCB", "Sourcable");
else
DS_2.clearFilter("GP_XSRCB");
I would like to note that this script on CheckBox works fine based on universe as a source.
Please advice.

Dear All,
I am also facing same problem, while doing PGI (Post Goods Issue)
Can any one help in this please.
And the error message was
Characteristic value SEL F1P ADD 82947 does not exist for characteristic PAPH4 (ProdHier01-4)
Message no. KE0C133
Diagnosis
The characteristic "PAPH4" ("ProdHier01-4") should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value (" SEL F1P ADD 82947") is not valid in CO-PA.
System Response
The data is not consistent and therefore cannot be transferred to CO-PA.
Procedure
With the function Maintain Characteristic Values, you can add characteristic values to those that are valid.
1. When, I check contents of table MARA-PRDHA, it contains 17 character Alphanumeric input "SEL F1P ADD 82947"
2. When, I check character PAPH4 in KEA5-->Data type was CHAR and length was 17.
3. Characterstick PAPH4 cannot be maintained using KES1.
Thanks & Regards
Sahas

Profit center US01/ TP3870 does not exist for 03/23/2011

Hello Team,
Our Profit Center is 6045TP3870 but when SD guy is releasing SD document for Account at VF02, he is getting below error,
"Profit center US01/ TP3870 does not exist for 03/23/2011"
I don't understand why the system has taken part of Profit Center only. Profit center 6045TP3870 is well exist for 03/23/2011.
I have checked the Material Master when the profit Center is correctly maintained.
Can any one help to resolve this issue.
Spandana

Hey Spandana,
Make sure the profit center is active, and if it is, check for relevant validations and/or substitutions with user exits.

Profit center 1000/9999 does not exist for 21.10.2008-Message no. KM026

Hello
I am trying to create Inquiry through T-code VA12 but when I am assigning Project with it pop up error
Profit center 1000/9999 does not exist for 21.10.2008
Message no. KM026
Diagnosis
The desired profit center 9999 is not in the master data table for the specified date.
Procedure
Check your entry.
Note: The profit center is usually derived from the original account assignment object (cost center, order, and so on) or other information (such as the material number).
If necessary, create the desired profit center for the appropriate time frame.
Initially in this system dummy profit center activated but I now I donu2019t want dummy profit center so I changed master data date but now I am getting this error.
From were this (9999) dummy profit center is picking.
If some body has Idea let me know

Dear,
Go to tcode KCH5N select ur profit center on the right side u will find the validity period button click it to check. . If the posting is taking place within the validity period no issue else extend the validity period..
To check the period closing t.code is MMRV
To close the period - MMPV
If the problem still exists, then please go to KE53, give the respective profit center in which the material is assigned and enter.
There you can see the validity period for that profit center and I presume the validity period is ended before the creation date. Check that.
Regards,
R.Brahmankar

Partner profit center 855013 does not exist for 8/27/2008

Hi FI Guys,
Iam basically MM guy,i need some help on this FI issue.Could you please help any body please.
Based on the user issue below,i found that thevalid profit center was maintaining in Material master and the G/L account was may not be assigned to G/L account.
please reply step by step.
issue from user:
Iu2019m trying to obsolete some material using MB1A, movement type 951 and the disposal account # 13560002, but after I enter all the information and try to save it I get the following message at the bottom of the screen: u201Cpartner profit center 855013 does not exist for 8/27/2008u201D.
Thanks&Regards,
Babu
09930154536

Dear Babu,
The Profit Center of the selected material has expired validity. Just extend the validity through KE52 and press the button 'extend the validity period' to current year. I think that your problem will be solved.
Trust this helps much!
Cheers,
Ashok SINGH

Profit center 1000/DUMMY does not exist for 20.06.2011 KM026 - Asset postin

Hi Friends,
While posting asset opening balance (transaction type 100), we are getting the error 'Profit center 1000/DUMMY does not exist for 20.06.2011' for one company code. (not for all company codes. It is giving error to only one company code).
We don't maintain this dummy profit center as we have doc splitting activated for all the compay codes. So, master data for dummy profit center is not there in the system for all the company codes. But all the company codes are working properly except one company code. It is giving dummy profit center error.
Please could any one advice?
Thanks in advance.

Hi krishna Kumar,
I guess you are in ECC 6.0 version or above 5.0 version.
Up to 4.7 the profit center accounting was a part of Controlling. But from ECC 6.0 ( Enterprise Centrel Component) the profit center accounting is part of FI.
Regarding the error mentioned by you, you have activated profit center accounting from CO module, and you have assigned the number ranges for Profit Center Accounting, this means for the documents with the profit center account assingment system will generate 1 FI Document and 1 profit center document.
So wherever system is not able to find the profit center it will try to post the document for dummy profit center.
As per my experience with ECC 6.0 we need not activate and assign the number ranges for profit center documents.
Except OKE5 settings no other settings are required for profit center.
The above all is if you dont want to use classic profit center accounting. So first please check your requirement and take the decision.
thanks & regards,
shashi kanth.

Table does not exist for the sys user

Hey Everyone,
I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
Thanks,
Sarang

Yeah i am using the query....
SELECT * FORM SCOTT.EMP
It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs.

Node id does not exist for the current application server id on forms

Hi,
We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
while opening oracle forms we are getting" Node id does not exist for the current application server id "
on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
Fnd_nodes... which matches ( there is no mismatch of application server id) .
We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
Can some one guide as to which file has this message "Node id does not exist for the current application server id "
and what could be the reason for this.
Help is appreciated.
Regards,
Milan

I already tried the mentioned metalink note id but it did not work.What did you try exactly?
Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
Thanks,
Hussein

11.5.10.2 to R12.1.1 upgrade : AutoPatch warning : Product Data File $APPL_TOP/admin/*prod.txt does not exist for product

Hello Sir,
OS version : AIX 6.1
DB version : 11.2.0.3
EBS version : 11.5.10.2
As a part of 11.5.10.2 to R12.1.1 upgrade, I am applying merged patch (9179588:R12.AD.B) with 9477107:R12.AD.B and patch 7461070(R12.AD.B.1 upgrade driver).
I can see AutoPatch warning messages during adpatch session as below so I have not yet started this merged patch. Please suggest.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>adpatch
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                         Oracle Applications AutoPatch
                                 Version 12.0.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Attention: AutoPatch no longer checks for unapplied pre-requisite patches.
You must use OAM Patch Wizard for this feature. Alternatively, you can
review the README for pre-requisite information.
Your default directory is '/fmstop/r12apps/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AutoPatch records your AutoPatch session in a text file
you specify. Enter your AutoPatch log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adpatch.log] : adpatch_u_merged_R12AD11.log
You can be notified by email if a failure occurs.
Do you wish to activate this feature [No] ?
Please enter the batchsize [1000] : 2000
Please enter the name of the Oracle Applications System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
"Development_2".
Applications System Name [FMSTEST] : FMSTEST *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have files used for installing or upgrading the database
installed in this APPL_TOP [YES] ? YES *
Do you currently have Java and HTML files for HTML-based functionality
installed in this APPL_TOP [YES] ? YES *
Do you currently have Oracle Applications forms files installed
in this APPL_TOP [YES] ? YES *
Do you currently have concurrent program files installed
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle Applications will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle Applications
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [drix10] : drix10 *
You are about to apply a patch to the installation of Oracle Applications
in your ORACLE database 'FMSTEST'
using ORACLE executables in '/fmstop/r12apps/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AutoPatch needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] :
AutoPatch is verifying your username/password.
The status of various features in this run of AutoPatch is:
                                           <-Feature version in->
Feature                          Active?   APPLTOP    Data model    Flags
CHECKFILE                        Yes       1          1             Y N N Y N Y
PREREQ                           Yes       6          6             Y N N Y N Y
CONCURRENT_SESSIONS              No        2          2             Y Y N Y Y N
PATCH_TIMING                     Yes       2          2             Y N N Y N Y
PATCH_HIST_IN_DB                 Yes       6          6             Y N N Y N Y
SCHEMA_SWAP                      Yes       1          1             Y N N Y Y Y
JAVA_WORKER                      No        1          -1            Y N N Y N N
CODELEVEL                        No        1          -1            Y N N Y N N
Identifier for the current session is 2987
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/eaaprod.txt
does not exist for product "eaa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/abmprod.txt
does not exist for product "abm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/evmprod.txt
does not exist for product "evm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ipdprod.txt
does not exist for product "ipd".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zfaprod.txt
does not exist for product "zfa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cssprod.txt
does not exist for product "css".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/meprod.txt
does not exist for product "me".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnmprod.txt
does not exist for product "xnm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xncprod.txt
does not exist for product "xnc".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnsprod.txt
does not exist for product "xns".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/fptprod.txt
does not exist for product "fpt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okrprod.txt
does not exist for product "okr".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cueprod.txt
does not exist for product "cue".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ibaprod.txt
does not exist for product "iba".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozpprod.txt
does not exist for product "ozp".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozsprod.txt
does not exist for product "ozs".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rlaprod.txt
does not exist for product "rla".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/vehprod.txt
does not exist for product "veh".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rhxprod.txt
does not exist for product "rhx".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/imtprod.txt
does not exist for product "imt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ahmprod.txt
does not exist for product "ahm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okbprod.txt
does not exist for product "okb".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okoprod.txt
does not exist for product "oko".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xniprod.txt
does not exist for product "xni".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/amfprod.txt
does not exist for product "amf".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cunprod.txt
does not exist for product "cun".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following language is installed:
Code   Language                                Status
US     American English                        Base
Your base language will be AMERICAN.
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Reading database for information about how products depend on each other.
Reading topfile.txt ...
Saving product information.
Trying to obtain a lock...
Attempting to instantiate the current-view snapshot...
No baseline bug-fixes info available. Will attempt next time.
     **************** S T A R T   O F   U P L O A D ****************
Start date: Sun Aug 04 2013 18:45:12
0 "left over" javaupdates.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
0 patches uploaded from the ADPSV format patch history files: Sun Aug 04 2013 18:45:12
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
     ****************** E N D   O F   U P L O A D ******************
End date: Sun Aug 04 2013 18:45:12
Enter the directory where your Oracle Applications patch has been unloaded
The default directory is [/fmstop/patches/R1211AD/merge] :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

I checked under 11i $APPL_TOP/admin directory, I can see only one izuprod.txt file apart from applprod.txt.
drix10:/fmstop/fmstest/fmstestappl/admin>ls -lrt *prod.txt
-rwxr-xr-x    1 appltest dba          231650 Oct 30 2004 applprod.txt
-rwxr-xr-x    1 appltest dba            4966 Sep 21 2007 izuprod.txt
R12 code tree is newly installed so there is only applprod.txt
drix10:/fmstop/r12apps/apps/apps_st/appl/admin>ls -lrt *prod.txt
-rwxr-xr-x    1 appltest dba          226340 Jul 29 15:19 applprod.txt
Please suggest if I can ignore these warning to proceed with applying merged patch.

Tax code does not exist for jurisdiction code in creating purchase order

Hello Experts,
After doing a technical upgrade from 4.6 C to ECC EHP 4 , while creating a PO , we are facing an error that
"Tax code A0 does not exist for jurisdiction code 4318702801". for one plant .
But in 4.6C, there is no problem with the field jurisdiction code in Invoice tab at the PO item level data. it allowed to create PO even with out entering jurisdiction code .
we have assigned jurisdiction code to the particular plant through config settings in T code OX10.And also we have verified the G/L account properties for the material used in creaton of PO. it will allow all tax codes.
But still we are facing the same error.
Please suggest where to establish linkgae betweeen Tax code and jurisdiction code at customize / config level.
it is very high priority issue . please suggest
regards,
Tulasi

Hi,
As tax jurisdiction code is assigned to your plant on OX10 t.code and cross check Tax code declared as input tax & assigned to company code in t.code: OBCL with tjurisdiction code.
Now double cross check Tax code created (FTXP)for your country with jurisdiction code.
Also check table A003 for entry of tax code and company code.
Regards,
Biju K

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

~/oradiag_$USER/.. and "Directory does not exist for read/write" issue

Hi.
Recently I've discovered that ADR was creating a folder in one of ours Oracle 11.2.0.1 server, in the users home like ~/oradiag_$USER/.. The problem is that this logging files dont stop growning, and they are filled only with this lines:
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:41:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
etc
I've searched around internet about this issue all that I've found is a "workaround" by creating those folders. And yep, it works, it stops growning.
Then I checked the others servers that we have, and the problem replicates in some servers with the same Oracle version.
My question is: Why this? Why in some servers ADR is looking for that folder? That folder didnt exist in any of them, but only some servers tries to read/write on it (or, at least, log it) What parameter relies on it?
Regards.

Metalink note
11g Sqlnet Log Shows Error "Directory does not exist for read/write" [ID 797678.1]
Errors Filling log.xml and sqlnet.log: Directory does not exist for read/write [opt/oracle/oemagent/agent11g/log] [ID 1291286.1]

System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist

Hi,
I am facing with this problem. System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist.
I have reviewed in central admin. And my custom.masted is active.
some idea?
Patricia

is that a custom solution you deployed ?
look at your site collection master page gallery and verify if you have the master page .
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Error : DB Mapping does not exist for the Host in iSetup

Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TEST
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
Thanks in advance,
Regards,
900076.

900076 wrote:
Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TESTIs this the complete/exact error message?
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
http://docs.oracle.com/cd/E18727_01/doc.121/e15842/toc.htm
Thanks,
Hussein

Master does not exist for Characteristic 0Material

Similar Messages

Maybe you are looking for