Master Dtata Tables

What are the R/3 Master Data Tables for the below objects?
1)Reason for Investment
2)Main System Status of Appr Request
3)User Status of Appr. Request
4)Appropriation Request
5)Work Breakdown Structure Element
6)Assignment appropriation request
7)Assignment of Projects
8)Percentage Distribution of Approp. Request
9)Assignment of Orders

Hi,
Some of the tables are mentioned as below.
Main System Status of Appr Request - TJ02,You can use transaction BS23 to see these, or SE16n via normal enquiry
Appropriation Request - IMAK
Work Breakdown Structure Element- PRPS
Cost structure of maintenance order - PMCO
Project Definition - PROJ
Regards
Tushar
P.s. Reward points if answer is useful.

Similar Messages

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

Abap code not working - deleting based on master data table information

Hi,
I wrote a piece of code earlier which is working and during test we found out that it will be hard for the support guys to maintain because it was hard coded and there is possibility that users will include more code nums in the future
sample code
DELETE it_source WHERE /M/SOURCE EQ 'USA' AND
/M/CODENUM NE '0999' AND
/MCODENUM NE '0888' AND.
Now I created a new InfoObject master data so that the support people can maintain the source and code number manually.
master data table - the codenum is the key.
XCODENUM    XSOURCE
0999               IND01
0888               IND01
now I wrote this routine all the data gets deleted.
tables /M/PGICTABLE.
Data tab like /M/PGICTABLE occurs 0 with header line.
Select * from /M/PGICTABLE into table tab where objvers = 'A'.
if sy-subrc = 0.
LOOP at tab.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM NE tab-XCODENUM.
ENDLOOP.
Endif.
But when I chage the sign to EQ, I get opposite values , Not what I require.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM EQ tab-XCODENUM.
Cube table that I want to extract from
/M/SOURCE                             /M/CODENUM
IND01                                       0999
IND01                                       0888
IND01                                       0555
IND01                                       0444
FRF01                                      0111
I want to only the rows where the /M/CODENUM = 0999 and 0888 and i would also need FRF101
and the rows in bold should be deleted.
thanks
Edited by: Bhat Vaidya on Jun 17, 2010 12:38 PM

It's obvious why it deletes all the records. Debug & get your answer i wont spoon feed
Anyways on to achieve your requirement try this code:
DATA:
      r_srce TYPE RANGE OF char5, "Range Table for Source
      s_srce LIKE LINE OF r_srce,
      r_code TYPE RANGE OF numc04,"Range table for Code
      s_code LIKE LINE OF r_code.
s_srce-sign = s_code-sign = 'I'.
s_srce-option = s_code-option = 'EQ'.
* Populate the range tables using /M/PGICTABLE
LOOP AT itab INTO wa.
s_code-low = wa1-code.
s_srce-low = wa1-srce.
APPEND: s_code TO r_code,
          s_srce TO r_srce.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM:
r_code COMPARING ALL FIELDS,
r_srce COMPARING ALL FIELDS.
* Delete from Cube
DELETE it_source WHERE srce IN r_srce AND code IN r_code.

What are the master data tables for 'Plant'?

Hi friends,
What are the master data tables for 'Plant' that contain below data?:
PLANT
NAME1
NAME2
LANGUAGE
HOUSE_NUM_STREET
PO_BOX
POSTAL_CODE
CITY
COUNTRY_KEY
REGION
COUNTRY_CODE
CITY_CODE
TIME_ZONE
TAX_JURISDICTION
FACTORY_CALENDAR
Thanks a lot!

Hi,
Plz try out following tables for your requirement.
TOO1W
ADRC
J_1IMOCOMP
T001W : werks TYPE t001w-werks, "PLANT
        name1 TYPE t001w-name1, "PLANT DESCRIPTION
        adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
ADRC: addrnumber TYPE adrc-addrnumber, "ADDRESS NUMBER
         str_suppl1 TYPE adrc-str_suppl1, "STREET2
         str_suppl2 TYPE adrc-str_suppl2, "STREET3
         street TYPE adrc-street,          "STREET
         city1 TYPE adrc-city1,            "CITY
         post_code1 TYPE adrc-post_code1, "CITY POSTAL CODE
         post_code2 TYPE adrc-post_code2, "PO Box postal code
         tel_number TYPE adrc-tel_number, "TELEPHONE NUMBER
         fax_number TYPE adrc-fax_number, "FAX NUMBER
         str_suppl3 TYPE adrc-str_suppl3, "STREET4
         location TYPE adrc-location,      "STREET5
         city2 TYPE adrc-city2,
For Tax Details :
J_1IMOCOMP :   werks TYPE j_1imocomp-werks,
                          j_1icstno TYPE j_1imocomp-j_1icstno,
                          j_1ilstno TYPE j_1imocomp-j_1ilstno,
Hope this will help.
Regards,
Archana

M or P master data table to be used in routine read statement

Hi
I update of a DSO i had a requirment for a routine to get the Attribute of a Infoobject.
So which master data table M or P table i need to use in my read statement and why
Thanks

Use M table as it it the view on time dependent(P table) and time independent(Q table) tables.
M table is view on time dependent and time independent attributes, you can see characteristic values and all the attributes for the Characteristic.
The tables that go in the view are the Master Data Table and the Time-Dependent Master Data Table. If the characteristic only has time-dependent attributes, only the time-dependent master data table goes in. If the characteristic has only non-time-dependent attributes, only the master data table goes in.

Which master data table to be used to get attribute value

Hi all,
I am writing routine in update rule to get data for one master data attribute of master data 0customer.
But I am cofused in choosing master data table to get data.
There are two master data table in master data tab of 0customer characteristics.
1. View of MstrDtaTbls :- /BI0/MCUSTOMER
2. Master data tab :- /BI0/PCUSTOMER
Suggest me which one to take .
Although I have tried with 2 one and it is working fine.

Hi,
If the attribute is not time-dependent please use /BI0/PCUSTOMER, else use /BIC/QRCOSTCTR.
Just remember P table and Q table.
Regards,
Frank

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

How to create time dependant master data table in R/3?

Hi gurus,
I am new to BW.I try to execute the 'Time dependant Attribute' into BW.in my scenario my source system must give me the data like "salesrep ID,Manager ID,Date to,Date from,Sales region". I like to know how to define this master data in SAP R/3(Source system)?. Give me the steps to create master data table in R/3.
Manager may change periodically.even i need to maintain all the changes in R/3.
Thanks & Regards,
Bharath

built-in type method means.,
there is no need to create data element and domain objects seperately for each and every field of the table which ever you are creating, system will implicitly fix the size based on the data type you selected....

Insert data in a user master data Table

Hi every body,
I've created a User Master data table named 'MyTable'. i want to add data to this table but there is an error which occur : 'to generate this. First Define the Numbering Series in the Administration Module'. I want to add data to this table using C# code, without using UDO.
Is it possible?
Thank you for helping me
Haifa

Hi,
thank you for your answer.
I didn't understand very well, i will ask the question in an other way.
it is possible to insert records in a master data table by using the code C#
I mean :
            usertable = _Company.UserTables.Item(tablename);
            usertable.Code = code;
            usertable.Name = name;
            usertable.UserFields.Fields.Item("U_ContCode").Value = ContCode;
            usertable.UserFields.Fields.Item("U_CardCode").Value = CardCode;
            lRetCode = usertable.Add();
without encountering the problem of numbering series.
Haifa

Button enable/disable in Master-Detail table

I am using JDeveloper 11.1.1.3.0 and I have a page fragment (.jsff) which includes a Master-Detail table and the Master table has 3 buttons that get enabled/disabled based on the specific string within a column say, if the column has value, 'DRAFT', the buttons should be enabled. In all other cases, the buttons should be disabled.
The above mentioned scenario works in cases where the table has more than one row in the table; but in two cases the buttons don't get enabled even though the column has 'DRAFT' as its value:
     1. when the table first loads with the data populated in the table; clicking on the first row doesn't trigger the buttons, clicking on any other row triggers the buttons
     2. when there is only one row in the table
To resolve this, I tried looking at the logs for any specific information regarding the buttons getting enabled or disabled. I couldn't find info on setting up a breakpoint for the commandbutton and the disabled property which would enable me to determine whether it is being triggered as soon as the table gets populated or not.
How can I get the buttons to work per my requirements? Also, can I set breakpoints for the button and/or evaluate disabled property's EL expression?
Thanks in advance.

Navaneeth:
The buttons are part of panelCollection which exists in panelHeader. As the below code demonstrates,
1. Buttons are defined in the toolbar (t2) in panelCollection (pc1)
2. Each buttons' partialTrigger is set to the table (md1)
3. Tables' (md1) partialTrigger is set to the toolbar (t2).
<af:panelHeader text="#{viewcontrollerBundle.HISTORIC_PANEL_SPECS__TESTER_S}" id="ph2">
        <af:panelCollection id="pc1" styleClass="AFStretchWidth">
          <f:facet name="menus"/>
          <f:facet name="toolbar">
            <af:toolbar id="t2" partialTriggers="t2">
              <af:commandButton actionListener="#{bindings.promotePanelSpec.execute}"
                                text="#{viewcontrollerBundle.PROMOTE_PANEL_SPEC}"
                                id="cb1" icon="/Images/up16.png"
                                partialTriggers="md1"
                                disabled='#{bindings.Status!="DRAFT"}'
                                immediate="true"/>
              <af:commandButton text="#{viewcontrollerBundle.ADD_TESTER_SPEC}" id="cb2"
                                partialTriggers="md1"
                                icon="/Images/action_add.gif"
                                actionListener="#{bindings.CreateWithParams.execute}"
                                action="addTestSpec"
                                disabled='#{bindings.Status!="DRAFT"}'/>
              <af:commandButton actionListener="#{PanelSpecTesterSpec.deleteTesterSpec}"
                                text="#{viewcontrollerBundle.REMOVE_TESTER_SPEC}"
                                id="cb3" partialTriggers="md1 ::pc2:t1"
                                icon="/Images/delete.png"
                                disabled='#{bindings.Status!="DRAFT"}'/>
            </af:toolbar>
          </f:facet>
          <f:facet name="statusbar"/>
          <af:table id="md1"
                    rows="#{bindings.PanelSpecTesterSpecView1.rangeSize}"
                    fetchSize="#{bindings.PanelSpecTesterSpecView1.rangeSize}"
                    emptyText="#{bindings.PanelSpecTesterSpecView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                    var="row"
                    value="#{bindings.PanelSpecTesterSpecView1.collectionModel}"
                    rowBandingInterval="0"
                    selectedRowKeys="#{bindings.PanelSpecTesterSpecView1.collectionModel.selectedRow}"
                    selectionListener="#{bindings.PanelSpecTesterSpecView1.collectionModel.makeCurrent}"
                    rowSelection="single" partialTriggers="::t2"
                    filterVisible="true" displayRow="selected"
                    filterModel="#{bindings.ProductIdPanelSpecVersionToolNameQuery.queryDescriptor}"
                    queryListener="#{bindings.ProductIdPanelSpecVersionToolNameQuery.processQuery}">
            <af:column headerText="#{bindings.PanelSpecTesterSpecView1.hints.ProductId.label}"
                       sortProperty="ProductId" sortable="true" id="c39"
                       filterable="true">
              <af:outputText value="#{row.ProductId}" id="ot28"/>
            </af:column>
            <af:column headerText="#{bindings.PanelSpecTesterSpecView1.hints.Status.label}"
                       sortProperty="Status" sortable="true" id="c43"
                       filterable="true">
              <af:outputText value="#{row.Status}" id="ot40"/>
            </af:column>
          </af:table>
     </af:panelCollection>
</af:panelHeader>The fact that the above code works when there are multiple rows tells me that buttons are having trouble reading the first row of the table.
Also, I changed the displayRow property for the table from "selected" to "first" but no luck either.

Problem with crude operations in master detail tables

Hi,
I have Master-Detail tables in my page and crud operations are there for both the tables. Create/delete/edit are working fine on the master table but i am facing the following problems for the detail table
1.delete operation is alway referring to the 1st record.
2.Edit operation is working fine for the 1st time but when i amt trying to edit any other record it's refer to the previous record, if i did the same again then it's pointing to current record.
Selected row keys and selectionListner and row selection is defined on my detail table as shown below.
selectedRowKeys="#{bindings.CmSubscriberTerritoryXrefView1.collectionModel.selectedRow}"
selectionListener="#{bindings.CmSubscriberTerritoryXrefView1.collectionModel.makeCurrent}"
rowSelection="single"
Please do need full.

Hi,
Thanks for your quick reply.
I am using JDeveloper 11g. Yes i select the record, i am using a popup for delete operation so i write a button which invoke popup in that popup i am asking confirmation like do you wanted to delete for not. in the OK button i have return logic like
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("Delete2");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
operationBinding = bindings.getOperationBinding("Commit");
result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
FacesContext fc = FacesContext.getCurrentInstance();

Radio button in master-detail tables.

I work with ADF, Struts, JSP of JDeveloper10G 10.1.2.0.0 (Build 1811).
My DataPage has two master detail tables. Master table has radio button in each row.
If click on radio button of master table, information on detal table no change. But with Navigation buttons all right.
In master table radio looks like this:
<input type="radio" name="rowKey" value="<c:out value='${Row.rowKeyStr}'/>"
<c:if test='${Row.currencyString == "*"}'> checked</c:if>/>
What can i do to relate these tables over radio ?
Thanks.

Hi,
the radio button by itself only sets the row currency but doesn't refresh the page. You will have to enforce a page refresh if master and detail are on the same page so teh detail data can be updated
Frank

How to check the records in Master Data Table?

Hi,
   I am trying to load the Master Data Table using the Flat File.Now how to check the records in Master Data Table?
I done the following way:
Info Provider->Info Object->Right Click->Display Data or Maintain Master Data
But it's not showing the records.It's asking like CID from......To......
                                                                    CID(SID)from.............To.......
                                                                     here CID means customer id(characteristic).
and showing some settings.
Please guide me.
Thanks & Regards

Hi Sri,
Go to T- code RSD1 and type your info object name and open the P- table in the infoobject then select execute symbol to see the updated data in to master data info object.
regards
sap

Filtering not working for newly added child objects in master-detail table

Hi,
I am using Jdeveloper 11.1.1.4 version.
Problem scenario:
Filtering of records is not working for newly created child objects in a master-detail scenario.
Steps to reproduce this issue using HR Schema (using LOCATIONS and DEPARTMENTS table ) :
1. Create Business components (EO's & VO's ) for LOCATIONS & DEPARTMENTS table)
1. Create a .jspx page and insert a readonly master table of Locations
2. Insert a child table (inline-edit table) of Departments and enable filtering
4. For the child table, drag and drop CreateInsert operation as a toolbar button .
5. Create a new child record using the toolbar button and enter data .
6. Filtering on the newly created child record's attributes does not work.
Please note that the same filter works for existing child records.
Any suggestions for resolving this issue?
Thanks,
Vikas

Found from Fusion Developer's Guide the following snippet about QBE functionality :
"+When you create data controls, all data collections will automatically include a Named Criteria node with an All Queriable Attributes criteria. This is the default view criteria that includes all the searchable attributes or columns of the data collection. You cannot edit or modify this view criteria+. "
So, the question is if the implicit view criteria cannot be edited, how else to set the query execution mode to "Both" ?
Shouldn't ADF BC support this by default? Is this a bug?
Note:- If you create a maste-detail table using POJO datacontrols, filter works correctly for newly created child records also .
This seems to be an issue with ADF-BC datacontrols only.
Thanks,
Vikas

Master Data table in a Lookup in Transformation

Hi,
I am writing a Lookup in Transformations.As per the logic i need to read the Master Data Table of a Infoobject to get the Attribute from the master data table.
The Master data is not time dependent
Which Master Data table should i use in my Logic
/BI0/M *
/BI0/P *
Thanks

If there is no time dependency, use /BI0/P *

Master Dtata Tables

Similar Messages

Maybe you are looking for