Master Group in segmentation

Hi,
How and why is Master Group used.
I understand about the Target Group, but not about Master Group.
Regards,
Monica

Hi Monica,
Master groups are used to restrict the selection base during target group modeling in the Segment Builder. They are used to make a pre-selection that allows you to avoid having to enter certain selection criteria again for every modeling run, and that also excludes certain business partners (for example, business partners selected for deletion) from the selection.
Master groups can be created by reports that must be predefined in Customizing, or they can also be created via Segment Builder.
In the standard delivery, the following programs are used to create master groups:
●     B2B / B2C
●     Country Distribution
●     Territory Management
●     All Business Partners by Channel Partner
●     From Target Group
http://help.sap.com/saphelp_crm50/helpdata/en/2e/0f050769001a4eb8ceaa87dc7dba1a/frameset.htm
Please see the below threads for more info
Update Master Group based on Target Group
Re: Creating Target group
<b>Do not forget to reward if helps</b>
Regards,
Paul Kondaveeti

Similar Messages

How to create master group in Portal - Segment Builder?

Hi All,
May i know how to create master group by using existing target group in segment builder PCUI in portal?
I manage to do it in sapgui:
tc: crmd_mktseg_mgr -> create new master group -> assign existing target group -> execute button -> master group is created.
I tried in portal: click on segment builder tab -> search existing profile set -> open existing profile set -> click on target group tab -> mark one of target groups -> click on Master group button -> save changes -> go back to sapgui crmd_mktseg_mgr -> search for all the master groups -> i dun see result that i did in portal.
Can guide me on this?
Appreciated your guide. Thanks.
Regards,
wyee

Hi All,
May i know how to create master group by using existing target group in segment builder PCUI in portal?
I manage to do it in sapgui:
tc: crmd_mktseg_mgr -> create new master group -> assign existing target group -> execute button -> master group is created.
I tried in portal: click on segment builder tab -> search existing profile set -> open existing profile set -> click on target group tab -> mark one of target groups -> click on Master group button -> save changes -> go back to sapgui crmd_mktseg_mgr -> search for all the master groups -> i dun see result that i did in portal.
Can guide me on this?
Appreciated your guide. Thanks.
Regards,
wyee

Segment Builder: Authorisation for Master Groups, Profile set & TargetGroup

Hi Gurus,
On Segment Builder, I've created Master Groups from Target Groups. How do I restrict certain users from accessing certain Master Groups or Target Groups or Profile sets?
Your help is much appreciated.
Thank you.
Regards,
Carol

Hi Monica,
did u find an answer for this query on Target groups
Please let me know
Thanks
Edmonds

Master Group

Hi Gurus
What is Master Group and when we are using and what the use full of master group
Many Tanks
Mahesh Kumar
[email protected]

hi
master group is the standard group from which actually the target groups are derived,if u want to do the segmentation u put entire set of data in converged area known aas master group and then taking data set from that area known as target group u do the segmentation,
for more info please go through:
http://help.sap.com/saphelp_crm40/helpdata/en/d4/b0813a19a2416de10000000a114084/frameset.htm
http://help.sap.com/saphelp_crm40/helpdata/en/e8/f7b19cade14845b0e051a864463841/content.htm
best regards
ashish

Master Groups

Hi,
In SAP library (http://help.sap.com/saphelp_crm50/helpdata/en/2e/0f050769001a4eb8ceaa87dc7dba1a/frameset.htm), it is mentioned :
"You can use the master group to define that a campaign manager can only select customer data for which he or she is responsible. When the campaign manager creates a profile set, he or she is forced to enter the appropriate master group.
In Customizing, you can define that the use of master groups is mandatory for certain segment types. The segment type is linked to the authorization object that can be used to determine which user has display, change, or delete authorization for which segment type."
Can someone please suggest. I have no idea how to do that.
Pls help.
Monica

Someone was asking this yeesterday, too.
If you have CS6 or CC, you can use the Content Collector to do this.
http://helpx.adobe.com/indesign/using/linked-content.html

Error when creating master group

I am trying to set up a replication environment with only one master site. I do
it by running SQL script using SQLPlus (rather than using the Wizard). The
following is the script I used to create the master site:
create user REPADMIN identified by REPADMIN;
BEGIN
DBMS_REPCAT_ADMIN.GRANT_ADMIN_ANY_REPGROUP(
userid => 'REPADMIN');
END;
grant comment any table to REPADMIN;
grant lock any table to REPADMIN;
grant execute any procedure to REPADMIN;
All lines completed successfully. Then I connect as "repadmin" and try to
create a master group. The following is the screen capture when I ran the
SQLPlus:
Connected to:
Oracle7 Server Release 7.3.4.4.1 - Production
With the distributed, replication and parallel query options
PL/SQL Release 2.3.4.4.1 - Production
SQL> BEGIN
DBMS_REPCAT.CREATE_MASTER_REPGROUP(
gname => 'REPGRP01',
qualifier => '',
group_comment => '');
END;
2 3 4 5 6 7 BEGIN
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 2121
ORA-06512: at "SYS.DBMS_REPCAT_MAS", line 420
ORA-06512: at "SYS.DBMS_REPCAT", line 45
ORA-06512: at line 2
I have no idea on the error message and even don't how to trace the error.
Is there anything I missed when creating the replication administrator
'repadmin'? Or anything I have to set up as well before I can create a master
group?
p.s.
1) The version of the Database is 7.3.4.4.1
2) I did try to create a master group using the Wizard in DBA studio, but
same error messages appeared.
Thanks in advance.
Kae

Hi,
Before creating new purchasing groups- 1st check your user ID is authorized to purchasing groups create in t.code: OME4.
In development system you can creates new purchasing groups with USER ID and telephone numbers, upon saving system will create a transport request. Later you can transfer related transport request to quality system for your testing.
For example: You can creates new purchasing groups with USER ID and telephone numbers
Purchasing groups-------------USER ID ---------------Telephone numbers
Z01-----------------------------------USR01------------------232569875
Z02-----------------------------------USR02------------------232589876
Regards,
Biju K

Creation of master group

I'm setting up a master group for the first time.
The master group contains 2 nodes.
I want to replicate an entire schema - the schema contains tables,indexes, procedures, triggers and functions.
The actually schema already exists and has data (the same) already.
When I create the master group (using replication manager), I select all the tables in the schema, but I am unsure as to whether I should also select the indexes and procedures in my schema.
I would of thought that oracle replication simply does an update/insert/delete in the remote table, whose indexes, if it has any would be updated anyway - hence I do not explictly need to add the indexes to the master group?
Is this correct?
In what circumstances would you add more than just the tables to the master group.?
I'm confused.

Dear,
Create a new GL (Depreciation) with P and L account then transfer the balance from the existing Balance sheet GL to P&L GL, then try to block or set a deletion flag for the Balance sheet GL.

HOW TO DELETE A MASTER GROUP

Hi,
I 'm trying to delete or drop a master group that I have created in a 10g database. I run the following code:
begin
DBMS_REPCAT.DROP_MASTER_REPGROUP (
gname => 'MASTER_DIMAYOR',
drop_contents => false,
all_sites => false);
END;
and this error appears:
begin
ERROR en línea 1:
ORA-23313: el grupo de objetos "PUBLIC"."MASTER_DIMAYOR" no está llamando a una base de datos maestra en TRUE.REGRESS.RDBMS.DEV.US.ORACLE.COM
ORA-06512: en "SYS.DBMS_SYS_ERROR", línea 105
ORA-06512: en "SYS.DBMS_REPCAT_UTL4", línea 2867
ORA-06512: en "SYS.DBMS_REPCAT_MAS", línea 2660
ORA-06512: en "SYS.DBMS_REPCAT", línea 635
ORA-06512: en línea 2
thanks

It is probably best to do a full Restore on the iPod or at least use the Erase all content option in the Settings area.

Number of Master Groups

Hi,
Is there a decrease in performance if I create a large number of master groups?
I'm running mulitmaster replication on a system that needs to be highly available. And whenever the database goes into a quiesced state and I cant update objects it causes big problems for me. I was wondering if creating more master groups would limit this problem, because only the objects contained within it couldnt be updated.
Thanks

The major downside of having multiple refresh groups is that you can end up with materialized views that are transactionally inconsistent with each other. If a parent and child materialized view are in different refresh groups, you may end up with rows in the child materialized view that reference parent rows that don't exist or rows in the parent table that appear not to have some or all of the child rows in the child materialized view.
Justin

Changing archived status for target group or segmentation model.

Hello, CRMies!
In SAP CRm WEBUI i set "To archive" flag for segmentation model and now it has status "Archived". The problem is hat it became inactive now and i can't reset this status. I didn't execute any archiving reports, just set the flag on. I was looking for any FM or reports to recover the status.
Anybody knows how to unarchive segmentation model or TG?

Hi Katya,
as far I know the segmentation model is archived with the next scheduled archive run once the status 'to be archived' is set. The status can be undone before the archive run, once this is archived there is no way other then generating the segment again.
Please refer to the online help about further information:
Archiving Segmentation Elements - SAP Library
For target groups andproduct segments there is also a read program in transaction SARA, which you can use to display the archived segmentation elements again at a later point in time, if required.
Furthermore, the information structure SAP_CRM_MKTTG_I is available for target groups and product segments in the transaction SARA.
You can not only read, but can also load archived segmentation models into the system. However, you should only use this function when it is absolutely necessary. For further information, see Reloading Archive.
Since you cannot load target groups or product segments into the system, you need to generate these again to be able to use them.
I hope this helps.
best regards,
Johannes

"Assign Collection Groups to Segment" - Disable Default Group Option.

Hi,
I am using the SAP FSCM Collections Management module. I have a requirement in the following:
"Assign Collection Groups to Segment"
I don't want to have a Default Group in a particular segment. The Default Group is a standard SAP feature.
I would like to disable it, does anyone have any experience with the Field Status Groups in Collection Management, or is there any way this can be disabled.
Do let me know at the earliest.
Thanks & Regards,
Bhairav Naik.

Hi Bhairav,
In our situation, we were unable to systematically determine which group/processor should be assigned for new customers. So, I created a group called "New" and made that the default. The A/R Manager is notified when a new customer is created. It is her responsibility to update the collections profile on the business partner.
Regards,
Beth

Authorisation for MAster Group or Target Group or Profile set

Hi
How can we restrict certain users from accessing certain Master Groups or Target Groups or Profile sets?
For example we may not want employees in Europe to access target grp pr master grp of Customers in US.
How to do that?
Thanks in advance, reward points for any help.
Regards,
Monica

Hi Monica,
did u find an answer for this query on Target groups
Please let me know
Thanks
Edmonds

BAPI to build target group for segments

Hi all,
I looking for a BAPI that builds target group for segments and not for profile sets.
Transaction CRMD_MKTSEG allows to create TG in two ways :
- Build for Profile SET
- Build for Selected segment
BAPI_TARGETGROUP_CREATE is like u201CBuild for Profile SETu201D, since it requires a profile set guid as input
I have not found anything to u201CBuild for Selected segmentu201D, putting as input only a Profile.
The reason is that I need to "refresh" every day the target group and it is possible only if I create a TG for segment and not for profile set. In this second case the TG is frozen and no more refreshable,
Thanks.
regards
Emanuele

Hi Emanuele,
There are three types of Segments:- Profile Sets, Target Groups, Profiles.
(You can check this yourself:- Go inside Find segments, then choose Advanced Search. You will get option to find Marketing Segments based on whether they are Profile sets or Target Groups or Profiles )
It means Profile Sets is also a type of Segment. So i am bit confused with your question.
If i understand your question correctly, you simply want to create a target group which should be refreshed automatically on a daily basis.
You can very well achieve this daily refresh by building the Target Group in Background Mode. While creating a Target Group there are two modes possible :- 1)Build Target Group in Dialog Mode 2)In Background Mode.
So u need to build your Target group in background mode and While creating the Target Group in Background mode:-
Select the Checkbox "Active"
Do not select the checkbox "Modelling Completed".
Hope this helps in resolving your issues.
rgrds,
Randhir

Enhance output of Target Group in segment builder

Hello Experts,
We are implementing SAP CRM Lean Marketing using CRM 7.0. Our business requirement is to do segmentation based on Company attributes and Relationship Category. The output of the target group should enlist the persons related to the Company based on the relationship category selected while doing the segmentation.
Using standard InfoSet CORM_MKTTG_BP_ORG_CDE and while creating data source selecting BUT000_PER-PARTNER_GUID in the field business partner, we are able to get the list of persons matching the segmentation query (based on the relationship category e.g. Has Supplier, Has Contact Person, etc) . But the issue is , the output of the target group (shown as an ALV grid , when the target group is opened in segment builder) only enlists matching Persons, it does not enlist the related company ID /name in front of the Person ID in the output of the target group. And this Company BP ID is not available if I try to modify the output layout. So business is unable to understand the Person enlisted in TG belongs to which Company. Can we enhance this ALV grid output of the target group displayed in segment builder ? if yes , how can it be achieved ? If this is possible and we are able to add related company BP ID/ name in front of every person enlisted in the target group then our issue gets resolved. Or is there any alternative solution to resolve this issue ?
Highly appreciate your early response in order to resolve this critical issue.
Thanks and Regards
Ambar
Edited by: AMBAR ADHAV on Sep 10, 2011 11:53 AM
Edited by: AMBAR ADHAV on Sep 10, 2011 2:22 PM

Hello Experts,
We tried implementing BADI CRM_MKTTG_SEG_MEM_EX in order to add Company ID/ Name , but the issue is the BADI gets Input as persons BP id, nothing else, due to this if a person is having relationships with multiple companies, the BADI is unable to identify which company to choose as Relationship Category is not available to the BADI. And further issue is if a Person is having same relationship category with 2 companies e.g. Supplier for company A and for Company B too , in this case too the BADI is unable identify correct Company to return to the target group output
Is there someting in the Infoset that can resolve our issue ? How can I make available the fields in the infoset to the ALV output of the target group. Using SQ02 I am able to add fields to the field groups for selection in segmentation, but can anyone guide, how to make the field available in the output list ?
Please provide your technical assistance
Thanks
Ambar

FI-AP (vendor master group, Zip code required field)

Hello SAP Guru's,
I am working on Vendor master data groups and my client asked me to make the zip code field mandatory. When i go to "define account groups with screen layout- vendor name-general data- address, i don't see a tab for Zip code to make it a required field. However, i checked Postal code, city field and make it into a required field. Is zip code = Postal code, city? or do i have to contact other programmers so they can design this functionality in SAP?

Dear,
yes, I also confirm You that the Zip code is the Postal code.
So please go to IMG --> Define Account Groups with Screen Layout (Vendors)
and for Your Account Group do the following setting:
double click on General data --> double click on Address
and define as Required entry the field Postal code, city technical names:
City LFA1-ORT01
Postal Code LFA1-PSTLZ
I hope this helps You.
Mauri

Master Group in segmentation

Similar Messages

Maybe you are looking for