Master IDOC but not the communication IDOC

Hi
what is master IDOC and the communication IDOC
what is the diff?
i have installed sap gui in my system and how to connect the sapserver through internet?

HI SAPABAP,
1>Master idoc is only created but it won't be stored in database,where as communication idoc is stored in database.
2>Data is transferred via communication idoc not by master idoc.
Regards,
Nagaraj

Similar Messages

  • Delet Material Master Record but not the range

    HI experts,
    I have more material master records in production data base; now i need to delete them but at the same time don't remove the range numbering.
    I.E.
    there are 10 master record with range number from 1 to 10.
    now, deleting these 10 master records, i would like to avoid that the numbering starts from 11.
    thanks in advance
    C.

    Hi Jurgen,
    I've gone through the data archiving project in the past. I was actually hoping I don't have to go through this big exercise for this minor situation.
    The storage locations in the SAP system are fine. The problem is that when I came in to this organization, I found out that the procurement users have accidentally extended material master record to those storage location irrelevant to them. Those users don't post any stock to those accidentally extended storage location. They admit that it was a mistake. So, I don't really have to do stock movement or GI out from those affected storage location because there's nothing in them.
    Now that I've initially flag for deletion (MM06) of those mistakes done by those procurement users over the few years counting to 2000+ material master records affected. But the standard behavior of the SAP system allows change to proceed in MM02 except for that warning message MM081. So, I was actually asking around to explore if there's actually an option to make it an error prompt instead and stop the whole change process at MM02 transaction level.
    If I may re-confirm, what I've done so far via flaging for deletion of material master record at storage location level - is this the only correct solution available?
    Hope this clarifies my intention of opening this thread. Sometimes, users are quite tough in accepting the results from standard SAP system behavior.
    Thanks for the time in explaining.
    Steven

  • While creating customer master  i am getting the Communication error

    Hi experts,
    while creating customer master  i am getting the  Communication error with the external tax system (VERTEX_MS0018)    please tellme how to solve this issue
    Regards,
    Anil prasad
    Edited by: prasadanil on Sep 16, 2011 12:52 PM

    hI Prasad,
    It seems you are maintaining the address data for a country with jurisdiction code. Different external control systems can behave in different ways.
    1. You entered a jurisdiction code that matches the postal code but not the city (possibly due to a typo).
    a) Behavior when you use Taxware: There is no message and data can be saved.
    b) Behavior when you use Vertex: Due to the incorrect city, no comparison jurisdiction code can be determined and message TAX_TXJCD861 is issued with a text from the vertex system that may be unintelligible.
    2. You do not enter a jurisdiction code, but you do enter a postal code and a city that does not match the code (possibly due to a typo).
    a) For Taxware: If the jurisdiction code could not be explicitly determined, a selection dialog box containing the relevant tax jurisdiction codes for the postal code appears. You select one. This and the corresponding city are transferred.
    b) For Vertex: The TAX_TXJCD861 message is issued (behavior as in 1b). Other terms TAX_TXJCD861, TAX_TXJCD101, TAX_TXJCD107.
    For resolving this issue, you can check SAP Note 677850 - Address data: Check/new determination jurisdiction code.
    Hope you will resolve the above issue with these inputs.
    Let me know if you need any further details.
    Ravi.

  • How to create a custom control of a button where the look will be applied to all others but not the Boolean text?

    Hi all
    I would like to create a customized button as a master so that if I change the look of the master all other buttons will change too.
    I have done this with a custom control as a "strict type def" otherwise the look will not change BUT If I do this as a strict type def I cannot change the Boolean text anymore which should be different on every button.
    How can I create a master control of a button where the look will be applied to all others but not the Boolean text?
    Stay Hungry, Stay Foolish
    Solved!
    Go to Solution.

    Steve Chandler wrote:
    I don't think you can do that. I just looked and as I suspected the Boolean text property is read only for strict typedefs so you cannot use property nodes to change the text.
    As a workaround just make it a typedef. When you want to change the look open the typedef and make it strict, make your changes, then make it non strict again. You will have to update the Boolean text again for all instances. Kind of a pain. Maybe this is something for the idea exchange.
    Kudos for being sneaky.
    I like these creative work-arounds!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • "SOME" devices can resolve the ALIAS (CNAME record) for a device, but not the REAL name (A record) - Why? How do I fix this?

    I'm running the DNS server role on Windows Server 2012 R2 on a physical machine on my home network.
    My AD is configured with a non-registered name - let's say it's "home.acme.ca" and the DNS server is configured to host that zone.  I also configured a 2nd zone in the DNS server called "myinf.acme.ca".  They both run on a physical
    server with an IP of 192.168.1.10
    The DHCP server on my Cable Modem is configured to hand out 192.168.1.10 as the only DNS server to every device on my network.  On my servers (with static IP addresses), 192.168.1.10 is configured as the only DNS server available for them. 
    I took the DNS servers from my Cable Provider and configured a Forwarder on my server to send name resolution requests to them only if my DNS server can not answer the request - basically for any name resolution request that does not end with ".home.acme.ca"
    or ".myinf.acme.ca"
    The "home.acme.ca" zone is populated with 'A' records for all of the physical and virtual servers and PC's on my network.
    The "myfin.acme.ca" zone is populated with 'CNAME' records that point directly to the 'A' record in "home.acme.ca" - for example, I have a serve named s000abc123ww.home.acme.ca with an 'A' record providing an IP address of 192.168.1.20 and
    I created a 'CNAME' (alias) record named 'webserver.myinf.acme.ca' which points to the 'A' record 's000abc123ww.home.acme.ca'
    2 of my 6 machines can resolve the alias but not the real name of the server!
    .10 is the Domain Controller.  All of the other machines (except .98) are members of the home.acme.ca domain.
    I attempted to ping 's000abc123ww.home.acme.ca' AND 'webserver.myinf.acme.ca' on the following 6 computers.  I used the fully qualified name in all cases.
    4 of the below machines are able to resolve BOTH names.  The other 2 can resolve the Alias but not the real name!
    I don't understand how this is possible, but I would like to fix it...!!!  Please help?
    .10 - Server 2012 R2 (Physical) -  Hosts Active Directory and DNS.
    .20 - Server 2012 R2 (Virtual)   -  Runs SQL Server
    .21 - Server 2012 R2 (Virtual)   -  Runs Apache
    .22 - Server 2012 R2 (Virtual)  -   Runs Apache.  This is the device I am trying to ping (s000abc123ww)
    .98 - Windows 7 (Physical)
    .99 - Windows 7  (Virtual)
    .21 (which is configured nearly identically to .20 and .22) can resolve and ping the Alias, but not the real name.
    .98 can also resolve and ping the Alias, but not the real name.
    The rest of the machines can resolve and ping both the alias and the real name.
    All of the Virtual Machines are running under Hyper-V on the .10 physical server.
    All the devices are on the same subnet.
    Thank in advance to anyone who can help me understand and correct this problem!
    Jim

    Hi,
    CNAME resource records are recommended for use in the following scenarios:
    • When a host that is specified in an A resource record in the
    same zone needs to be renamed
    • When a generic name for a well-known server, such as www, must resolve to a group of individual computers (each with individual A resource records) that provide the same
    service, for example, a group of redundant Web servers
    Therefore please try to create your CNNAM record in the same zone and try again.
    The related KB:
    Adding, Changing, and Deleting Resource Records
    http://technet.microsoft.com/en-us/library/cc779020(v=ws.10).aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • When saving a page as I get pictures saved but not the body of the page.

    Tried to do a "save as" web page from Gutenburg and got picture files in their directory but not the main body of text from the page.

    Hi gostay,
    I've followed your steps, but reproduce failed, here are my steps:
    1) Download sample:
    https://code.msdn.microsoft.com/windowsapps/App-bar-sample-a57eeae9
    2) Adding event listener as below in the default.js file:
    var p = WinJS.UI.processAll().
    then(function () {
    // new test code:
    window.addEventListener('pointermove', function () {
    console.log("pointer move");
    }, false);
    window.addEventListener('pointerdown', function () {
    console.log("pointer down");
    }, false);
    window.addEventListener('pointerup', function () {
    console.log("pointer up");
    }, false);
    // Navigate to either the first scenario or to the last running scenario
    // before suspension or termination.
    var url = SdkSample.scenarios.getAt(0).url;
    Screenshot:
    You can try my steps on your side and compare to yours.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • "printer is offline" appears on one computer but not the other (both windows 7)

    printer is offline" appears on one computer but not the other (both windows 7)

    This is pretty common to see when your firewall kicks in and blocks certain communication paths the printer takes.
    Here's a list of ports and programs that when allowed through the firewall, will restore communiction.
    Ports to open:
    UDP ports: 427, 161, 139
    TCP ports: 9200, 9220, 9290, 9500
    Programs to allow:
    hpiscnapp.exe
    hpoews01.exe
    hpofxm08.exe
    hposfx08.exe
    hposid01.exe
    hpqkygrp.exe
    hpqste08.exe
    hpqtra08.exe
    hpznui01.exe
    hpzwiz01.exe
    SLP_Service (also known as UDP 427)
    Have your security software provider walk you through allowing these items through your firewall.
    If this does not fix your issue, it is most likely an issue with the driver configuration. Your router may have assisgned the printer a new IP address and this can be changed in the properties of the existing driver.

  • Outlook-2 different entries for the same person (but not the same email)

    i was asked to switch from outlook 2007 to outlook 2013 as a trial.
    For some reason, I get two different entries for the same person (but not the same email), one which is the name as normal and one where the name has ' around it. In the below example:
    I have 24 emails sent to Ciaran and then a further 14 sent to 'Ciaran'
    The email address for both is exactly the same and it does not seem to matter if I create a new email or reply to an incoming one.
    I switched back to Outlook 2007 and the issue is still the same.
    any suggestions?

    I would say that there is no way to prevent Outlook from doing it, it dependents on how the sender formatted the sending address, not the recipient who replies.
    To fix this:
    Open the message and double click the address and view source
    Just replace the generated Display As with the Display As you want
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • Firefox 14.0.1 is NO longer showing the Norton SAfe Web icon in seacch results. The toolbar is there but NOT the safe web icon next to the URL in search results

    After updating to Firefox 14.0.1 my search results NO longer show the Norton WEB Safe Icon next to each result. It worked fine before the upgrade. The Norton tool bar is there and when you click on the site the safe web report is there but NOT the icon in the search results.

    Norton released updates for Firefox 14 early the same morning as the release of Firefox 14. Norton usually releases updates on the same morning as new Firefox versions. Have you updated Norton through their LiveUpdate?
    *See --> https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-14-Support-for-Norton-Toolbar/m-p/760924
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
    I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    https://www.google.com/calendar/iphoneselect

  • Why would the audio play through the headphones but not the speakers?

    I am working on an app that has embedded video. The audio works fine through my speakers and headphones as it does for some of my coworkers, but I also have other coworkers who get audio through the headphones but not the speakers. It's a variety of devices, 4, 4S, and 5. Any thoughts?

    If you are working on developing an app perhaps you should try the developers forum.

  • Hallo ,why is it that when I delete a photo ,which is backed up by time machine and western digital external hard drive , that I am able to restore the photo okay but not the titles and descriptions . I have  a Macbook 4.1, mac osx 10.5.8 . Iphoto 7.1.5 ,

    QUESTION.
    Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
    I am using  a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading  Iphoto ?
    I hope that someone is able to help in this matter , as i have to restore 12000 photos !
    Thanking you in anticipation.
    Alan from Wigton

    Hallo  Kieth ,
    I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
    Thanks for your interest and advice.
    regards  - Alan

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • I bougt a new  Macbook pro in 02/26/2013, in  11/25/ 2013, my trackpad become bulging, they exchange the trackpad, but not the bulging battery.  I went there yesterday, with different problem, and they said one screw  came off from the  truckpad again!

    I bought a new  Macbook pro in 02/26/2013 from Apple Canadian Ices -003.  Than I could not use it, because  my cursor uncontrollably  was jumping around the screen, I was  resumed my trackpad become bulging, Than on11/25/ 2013 they changed my trackpad for free, because was manufactoring defect,  but not the bulging battery.  They said that is do not needed.  Since that my cursor is quiet often quivering, I think my Macbook has serious  manufacturing defect. But they said no, during a year period I went to  the genius bar at least 15 times, with this and similar problems.   I went there yesterday, with different problems, and they said one of the screws  came off from my   truck pad, therefore they need to fix it and change it.  I said: -  What,  how, what  is the real problem?  A screw does not comes off just like that?  They will change my trackpad again, but not the battery. They said  has to rebuild the operation system, I'm  saving all of my data right now! I would like to exchange the battery too, or maybe get a new Macbook. My Macbook is 2010 China model. How long I would have this trackpad  problem? What are you suggesting?

    If it's a 2010 as you say towards the end of your post, it's out of warranty. The battery isn't covered in that case. Why don't you just buy a new battery if that's your concern? If it's a 2013 as you say up at the top, it shouldn't have a bulging battery. How do you know it does? If it really does, ask for the store manager and explain the problem.

  • I am trying to install windows 7 to my Macbook pro with bootcamp but every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7", any solutions ?

    Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?

    Was your Bootcamp info.plist manipulated to change any options?

Maybe you are looking for