Master package and Child Package

Hi Experts,
While doing the configuration for connection managers in a package I had noticed that if I don't hard code or give some invalid the user id and password for the database, even though it is configured it is throwing error while opening.
Is it the right way of doing?
Also when I run the master package all associated child packages are opening in different windows. Is it normal?
Please advice.
Regards
Mukejee

Hi Mukejee,
Except for executing a SSIS package in BIDS, we can also execute a package using the following methods:
Execute SSIS Package using DTEXEC.EXE Command Line Utility
Execute SSIS Package using DTEXECUI.EXE Utility
Execute SSIS Package using SQL Server Agent Job
In each method, we can specify the package configurations for the package at runtime. For the detailed information, please see:
http://www.mssqltips.com/sqlservertip/1775/different-ways-to-execute-a-sql-server-ssis-package/
http://technet.microsoft.com/en-us/library/ms162810(v=SQL.105).aspx
http://technet.microsoft.com/en-us/library/ms141701.aspx
Regards,
Mike Yin
TechNet Community Support

Similar Messages

Single XML configuration file for all the SSIS packages(including parent and child packages)

Hi
I have some 16 ssis packages. source Db and destination Db for these packages are common. I am calling these child packages in a master package.
I want to use only one XML config file for this master.
How do i use same for all child packages?
and can i do it with parent package variable?

I created a master package with a variable master, and in value i have entered the configuration file path.
Hi vjp dinu,
You should create variables in the parent package to pass values to variables in each child package rather than pass the file path of the XML Configurations file of the parent package.
As Visakh mentioned, you can achieve your goal by creating corresponding variables in the parent package for each child package, and enable Package Configurations for the parent package so that you can control the values through the XML Configurations file
for the variables of the parent package.
Supposing there is a variable FilePath in child package 1, a variable ServerName in child package 2, then, we need to create two variables pFilePath, pServerName in the parent package. After configuring the Parent package variable in each child package (e.g.
mapping pFilePath to FilePath, pServerName to ServerName), you can enable XML Configurations for the parent package, and expose the value property for both pFilePath and pServerName variables. In this way, you can modify the XML Configurations file of the
parent package and the specified values will passed to the child packages.
Reference:
http://microsoft-ssis.blogspot.com/2011/06/passing-variables-from-parent-package.html
Regards,
Mike Yin
TechNet Community Support

SERC content package and service package

Hi,
This is regarding regulatory content provider. I came across an SAP presentation on Product Safety and Dangerous goods, which talks about twp options:
1. Going for an on-premise approach using SERC - content package
2. Going for a service approach using SERC- service package
Could you please elaborate on both the service package and content package approach? How does it work/integrate with business processes in SAP?
Thank you,
Sruthi

Hello Ralph,
For our client, SAP has confirmed following:
"Customer has purchased SAP EHS Regulatory Content (ERC).
With licensing ERC the customer receives access
to the service marketplace of SAP to download
i) the licenced content packages, ii) the Admin Guide and iii) the Update Guide."
So I believe, our client has bought SERC and not SERD and this will be a On Premise solution and we need to download the required content to the client servers and implement the same.
Is my understanding correct?
Your early reply will really help.
Thanks.
Regards,
Niraj.

UOM in master ORG and Child Organization

Hi all,
In INV user guide, in "Primary Unit of Measure" section, I read the "Note: If an item belongs to both a master organization and a child organization, and these organizations belong to the same costing organization, the primary unit of measure for the item must be the same within both organizations."
What happend if I configure the diferent UOM in master and child org?

Were you able to?

SAP CUA connector changes password in master system AND child systems?

Please confirm if OIM can change the password in both SAP CUA master and child systems through SAP CUA connector. The connector guide mentions the following parameter can be defined in SAP CUA IT Resource.
Parameter: SAPChangePasswordSystem Flag that accepts the value X or ' '
If the value is X, then the password is changed
only in the master system. If the value is ' ', then
the password is changed in both master and child
systems.
This parameter is used by the Reset
Password function.
Thanks!

Hi,
1) You can use report RSCCUSND to distribute users from CUA to child client. Check section "Sending User Master Data to a Child System" in [CUA cookbook|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/fe4f76cc-0601-0010-55a3-c4a1ab8397b1?quicklink=index&overridelayout=true].
2) if the user account has not been synced to CUA then you should be able to delete it in child system. The button should be displayed for unsynced users. You can use transaction SCUG to sync users between new child system and CUA. Check section "Transfering Users from New System" in [CUA cookbook|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/fe4f76cc-0601-0010-55a3-c4a1ab8397b1?quicklink=index&overridelayout=true].
Cheers

[SOLVED]Weird conflict with official packages and aur packages

Hi. I have enchant-zemberek installed on my system. It is my package that i'm maintaining at AUR. Yesterday i tried to install poedit which depends on enchant. Weirdly altoguh enchant-zemberek provides enchant; pacman tried to remove enchant-zemberek and instead install enchant. Otherwise it won't let me install poedit. I have updated enchant-zemberek PKGBUILD and pacman let me install poedit without forcing me to install enchant. Here is what i have in my first PKGBUILD before update:
replaces=("enchant")
provides=("enchant")
conflicts=('enchant')
And after updating;
replaces=("enchant=${pkgver}")
provides=("enchant=${pkgver}")
conflicts=('enchant')
Now, i'm wondering while an AUR package have different package name than the official one why pacman tries to replace it? Why PKGBUILD needs package version in provides tag? Say, if i want to keep my own my-abc-1.0-1.i686.pkg.tar.xz but official package abc-1.1-1.i686.pkg.tar.xz released; must i keep my package only in Ignores array? Should i report this as a bug?
Last edited by tarakbumba (2011-04-07 09:52:41)

No, its not a bug. poedit depends on gtkspell which depends on enchant>=1.5.0 - your original custom enchant package did not provide any specific version of enchant, so pacman pulled in the repo package instead to satisfy the versioned dependency. As you have built your package with replaces=enchant, pacman also honours that.

MDM - Support Package and Enhancement Package

Hi Team,
Wondering, if do we have SP & Ehp applicable for MDM?
If available what's the latest SP & Ehp available for MDM 5.5?
And if any URL relevant to this topic is much appriciated.
Regards
Sekhar

Hi Sekhar,
Please refer to [SAP Note 1236844|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1236844] Which explains the MDM 5.5 versioning strategy.
As for your 2nd question - MDM 5.5 SP06 Patch05 is currently the latest version available for MDM 5.5.
Hope this helps,
Idan

Master child Package Example package

Hi Experts,
Can any of you guys please send some sample packages for master - child packages (dtsx files) which includes all configuration from an xml file to [email protected]?
XML conf --> Master --> Childs
I am new to SSIS and i just wanted to have a look at the options in those packages.
Regards
mukejee

Hi Mukejee,
To setup the association between the parent package and child package, there are two approaches:
Through passing variables. Specify the child package for the Execute Package Task in the parent package, and then add a Parent package variable type configurations in the child package.
Through passing parameters. Specify the child package for the Execute Package Task in the parent package, and map the parent parameters and the child parameters. No additional actions are needed in the child package.
Besides, the XML Configurations for a package is not affected by the factor that whether it is a parent/child package of another package or not.
Here, I have created two SSIS 2012 packages with the parent-child relationship that you can download from my
SkyDrive. In the parent package, I create a variable VarMaster with the value “This is a parent package variable.” In the child package, I create a variable VarChild with the value “This is a child package variable”, and use a Script Task to display the
value of the VarChild variable. You can see that the Script Task returns different values when we run the parent package or run the child package.
Regards,
Mike Yin
TechNet Community Support

Package calling other package and passing back the control to calling package

I have to loop through n number of package from a master package, any idea how to implement this?
Master package Calling child package in for each loop , here I need to loop through n no or rec from a table and each record needs a call to child package and return control back to calling pkg.. need to do this till the end of all the records in a table.
Child package1 -- Called perform some task and return control back to master package
Child package2 -- Called perform some task and return control back to master package
Child package n -- Called perform some task and return control back to master package
Thanks
Neil

You'll need following
1. A Execute SQL Task to retrieve the list of child packages to be called from table. Use your query inside, set ResultSet option as FullResultset and map the resultset index 0 to a object variable you create inside in the ResultSet tab.
2. Use For Each Loop with ADO enumerator and map to earlier created object variable. Inside create variables to retrieve individual column values out one of which will contain package name
3. Add a Execute Package Task inside the loop, choose Location as filesystem and map the Connection property to variable containing package name in expession window as per below
I assume the table stores the full path of package variable otherwise you need to add another variable to hold the path and a third variable to concatenate path + packagename to get the fully qualified package path value and assign it to execute package
task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Event logging in Parent-Child packages

Hello,
I have a set of Parent-Child SSIS packages. A Parent package invokes a bunch of child packages via "Execute Package Tasks".
I have set up custom event logging (to a SQL table) inside both Parent and Child Packages' Event Handlers (OnPreExecute, OnPostExecute, OnError).
I noticed that when a Child Package raises an event, both the Child Package's event handler and the Parent Package's event handler get fired, thereby creating duplicate event logging entries.
So, as a quick work around, I disabled event handlers in Child packages hoping that the Parent Package's event handlers will catch and log all events nicely. However, when the Parent Package's event handler writes event details to the table, it uses the
Parent Package's System::PackageId, System::PackageGUID and System::PackageName rather than that of the Child Package that originally raised the event!. So, my event log table records all events as if they were raised by the Parent Package!
Is it possible to disbale event bubbling up from Child Packages to the Parent package?
What options do I have to fix this problem?
Thanks

I came across this same issue and found a pretty nice workaround.
In brief, I used a Stored Procedure to write the OnError to a Logging table. So when this stored procedure was called I checked if the error was already in the logging table, and if it was then no record would be inserted.
I was already using the logging method 2 detailed here with a few changes.
To the PackageLog table I added a ParemtExecutionID value, which was passed into the child package through a Parent Variable Configuration. So for the OnPreExecute handler, the Parent Package passed NULL for the ParemtExecutionID, but the Child Package passed
in the Variable.
In the ErrorLog table I added a SourceID column, which is the GUID of the task that generated the error. In the Parent/Child Package configuration, the SourceID is the same in both OnError handlers.
So then when the Parent OnError handler calls the stored procedure, it checks if an ErrorLog record exists for the ParentExecutionID and SourceID combination.
Below is the OnError Stored Procedure I used. (Note: In my example only the Child Package has a Queue ID value.)
Create Procedure [dbo].[usp_Integration_Log_Error] (
@Execution_Id UNIQUEIDENTIFIER,
@Queue_Id INTEGER = NULL,
@Source_Name VARCHAR(255),
@Source_Id UNIQUEIDENTIFIER,
@Err_Code INTEGER,
@Err_Message NVARCHAR(MAX)
AS
BEGIN
DECLARE @ErrorCount INTEGER
IF @Queue_Id IS NULL
SELECT
@ErrorCount = Count(*)
FROM
INTEGRATION_ERROR IE
INNER JOIN
INTEGRATION_LOG IL ON IE.EXECUTION_ID = IL.EXECUTION_ID
WHERE
IL.PARENT_EXECUTION_ID = @Execution_Id AND
IE.SOURCE_ID = @Source_Id
IF ISNULL(@ErrorCount,0) = 0
INSERT INTO
INTEGRATION_ERROR (
EXECUTION_ID,
QUEUE_ID,
SOURCE_NAME,
SOURCE_ID,
ERR_CODE,
ERR_MESSAGE
VALUES (
@Execution_Id,
@Queue_Id,
@Source_Name,
@Source_Id,
@Err_Code,
@Err_Message
END

Where can I get a list of products for design and web packager?

Hi I need to create a package and the packager lists all the available software. What are included in the design and web?
Adobe CC 2014 Design & Web Premium:
– Adobe Photoshop CC
– Adobe Illustrator CC
– Adobe InDesign CC
– Adobe Dreamweaver CC
– Adobe Flash Professional CC
– Adobe Fireworks
– Adobe Acrobat Pro
– Adobe Muse CC
– Adobe Edge Animate CC
Which of the following can be included:
Scout
InCopy
Gaming SDK 1.3
Extension Manager CC
Extended Toolkit
Exchange Panel
Edge Reflow
Edge Code
Bridge
Cheers.

Hello InquiringMind,
Ray is absolutely right (thanks Ray!). Something that I would encourage you to do since it sounds like you are starting to dive into TestStand is take one of our customer education classes. We have TestStand I and TestStand II available at many different locations throughout the US and World. To sign up please visit ni.com/training or call 866-ASK-MYNI and we can help you out.
With warm regards,
David D.

SubVersion in SQL Developer - how to link to packages and procedures

My question is this - I am starting out using SubVersion in Oracle and it seems pretty straightforward to use as a source control for files that are stored in a Windows directory, that is the only way I have used it so far.
Am I able to use it to control packages and procedures that I have saved as part of my database, ie the procedures are part of a package and the package appears within the Packages section of the appropriate connection in SQL Developer.
I hope this makes sense.
Cheers,
JabJam

Hi JabJam,
So far, everyone is correct. SQL Developer just uses a file-based source control system (e.g., SVN), which means updating database object definitions via scripts under version control, or somehow exporting the new definition to a script so it can be version controlled after the fact. And wouldn't it be nice if the database objects could be version controlled directly. With the database developer having control over when any changes are committed for shared use in the database. Similar to using the SVN plug-in for an IDE like Eclipse for a given programming language in a shared development environment.
But what would your DBA have to say about that? Don't most DBAs require scripts for deploying code or structural changes?
In Oracle, definitions (DDL) are committed automatically. Anyone granted access sees them. Since you probably don't do development directly against a production database, eventually scripts (either manual or generated) will be needed for deployment to QA or production. Few mechanisms currently exist to work against an active database without other authorized users also seeing these changes.
For DDL, the closest thing would be the fairly recent edition-based redefinition feature in 11g (R2, I think). For DML, the OWM (Oracle Workspace Management) feature would be loosely analogous.
This is not a simple issue. Version control via an extension for Subversion provides essential basic support. Going beyond that might mean watching the evolution of edition-based redefinition, but DBAs would probably require scripts for that too.
Regards,
Gary
SQL Developer Team

App-V 5.0 Package and system folders

Hope someone can help me, having a weird issue with an App-V package that I've sequenced. I am sequencing an application on Windows 8 x64, and during install the application adds .dll files to the
c:\Windows\SysWOW64 folder. My sequenced machine is a VM with a saved snapshot, so for testing I revert back to the snapshot and expand the package to the local system. The program runs fine on the sequenced machine, and all the .dll files
appear correctly in the SysWOW64 folder.
When I go and deploy the package to a workstation (also running Win 8 x64) I get
missing .dll errors and the files required are not in the SysWOW64 folder. I tried editing the package and under
Package Files tab, changed the SystemX86
folder to Override Local Directory. Still this does not solve the problem.
What I don't understand is that it works perfectly on the sequenced machine, but does not for a workstation on our domain. Is there an issue with adding virtual files to protected folders? Or is there another way I can get this working?
If anyone could help me with this issue, I would be greatly appreciated. It's sending me mad!
Cheers!

I have the same problem with Casesoft TimeMap 4 and Notemap 2. No joke, cmen.dll is supposed to be in c:\windows\syswow64 but the virtual file system in AppV puts it in {systemx86}. I'm not sure what path that resolves to but these two programs
cannot find it where it's supposed to be. If I add a file from c:\windows\system32, the variable is {system} and if I put it in c:\windows\system, it puts it in Windows\system in the VFS.
I tried forcing the path to be Windows\SysWOW64 but appv auto creates the path when you select the file and won't let you edit it manually.
I ended up making a cmd copy installer since it has simple copy protection of a plain text registry key

Business package vs Transport Package

HI All,
What is the difference between Business package and Transport package?
Is there any relation between these two?
What is ESS and MSS? where do we use this?
Please make me clear on above questions.
Regards,
sekhar.

Business Packages are presupplied content for a portal, available from SAP or other vendors. They are uploaded ionto your portal. The upload mechanism depends on the version of the portal and the version of the business package.
Transport packages are what you use to move content between your portals.
ESS and MSS are examples of business packages available from the <a href="https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio">here</a>
You use business packages if their content makes sense!

Concurrent Execution of Child Packages from a Master Package

Hi,
I have a package which I am calling 9 times from a Controlling / Master Package. Its all running fine, except the Child package exceution is limited to 6 package only. 3 sit dorman in the pre executed state (shows as white on the control flow).
Is SSIS limiting how many packages can be executed concurrently? Is there a setting for this?
Many thanks,
Andy.

Ah! Found the Answer: http://sqlage.blogspot.co.uk/2014/03/what-is-maxconcurrentexecutables.html

Master package and Child Package

Similar Messages

Maybe you are looking for