Master Page: Alternatives (Subform Set) works only for the first page

Hi everybody!
I have bumped into a very weird problem with ADOBE Forms:
When I create an 'Alternative' in a Context area and then place it on a Master Page, it works only for the first page. On the rest of pages it always show the 'TRUE' subform, regardless of the condition (which is not changed, of course). Absolutely the same Alternative works perfectly in a Content area for all pages.
Has anybody seen something like this? Any ideas why?
Thank you!

This happens because of the processing of the form.
You can see this here:
LiveCycle ES2 * Adobe LiveCycle Designer ES2
You have to put a own variable, which is set with the value you want in the very beginning.
I know, it is not that logical in the first moment, but it makes sense.
Regards
Florian
PS: This space SAP Interactive Forms by Adobe is the correct for questions like that

Similar Messages

  • SQLLDR -- WHEN works only for the first INTO table

    I tries to load 2 table from one data file.
    SQLloader loads only the first table in the control file.
    If I switch the INTO sequence it then load the other table that now its the first in the control file.
    It works fine if I split the control into 2 controls that loads the table from
    the same data file.
    Is this a bug or am I forces to load it as two parts?
    -------------------------- control file ----------------------
    LOAD DATA
    INFILE 'test.xml' "STR '\n<ENDREC/>\n'"
    INTO TABLE MSDESTINATIONXML
    APPEND
    WHEN typeid = "D"
    FIELDS TERMINATED BY '^'
         typeid          FILLER char(1),
         ID          char(255),
         letterid      char(255),
         left           char(2000) TERMINATED BY '\n<ENDROW/>\n')
    INTO TABLE MSLETTERXML
    APPEND
    WHEN typeid <> "D"
    FIELDS TERMINATED BY '^'
         typeid          FILLER char(1),
         ID          char(255),
         bundleid      char(255),
         left           char(4000) TERMINATED BY '\n<ENDROW/>\n',
         right           char(4000) TERMINATED BY '\n<ENDROW/>\n')
    ---------------------------- end control file ----------------------------------

    This happens because of the processing of the form.
    You can see this here:
    LiveCycle ES2 * Adobe LiveCycle Designer ES2
    You have to put a own variable, which is set with the value you want in the very beginning.
    I know, it is not that logical in the first moment, but it makes sense.
    Regards
    Florian
    PS: This space SAP Interactive Forms by Adobe is the correct for questions like that

  • My printer will only print the first page of a doc from "Pages" in good quality.

    I've tried reloading drivers etc. Nothing works. My printer prints everything just fine EXCEPT for when I try to print a doc from the PAGES app. Then it only prints the first page (technically the last one prints first) and then all subsequnt pages are very poor quality.
    Lexmark tech support says the problem is not with their drivers.
    Any thoughts as to what the problem might be ??
    THANKS for any help !

    Then use the latest solution!
    Which doesn't need specifying either.
    Peter

  • Restrict window only on the first page of smartform

    Hi guys
    Please tell me how to restrict the window so that it doesn't appear on the second page. it should appear only on first page.
    I have check the additional events of the window. Even after that its appearing on second page .. how to restrict

    Hi,
    You can do the following thing to restrict the window in the next page.
    1. Copy the first page with all the windows to PAGE2.
    2. Delete the window whihc u don't require in the 2nd or any next page (PAGE2).
    3. Assign 'Next Page' field value as % PAGE2  for PAGE1 & PAGE2 under the General attributes Tab.
    These steps will help you retain a window only for the First page.
    Asha

  • Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days.  I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

    Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days.  I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying.  iPhone remote app works just fine.  Any suggestions?

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • I want to print an email which has multi pages but I can only print the first page

    Can anyone help please?
    i want to print an email which has multi pages but I can only print the first page
    Tony

    Firefox cuts off the URL in your printout, if it's really long, and you also have on the same line (header or footer), the Date and Pages
    What I have summarized below is based on this page . . . http://www.watchingthenet.com/how-to-change-or-customize-firefox-printing-defaults.html
    I have two questions:
    To fix, do a custom setting, for the Header and Footer as follows:
    Print / Page Setup / Margins & Header/Footer / "Customize" the "Left" as follows (leave Center and Right all blank)
    &T
    &U . . . . . . . &D . . . . . . . &PT
    &D shows the Short date as: M/d/yyyy - and then the time
    To change the format of the Short date in Win 8.1, go to:
    Control Panel / Date and Time / Date and Time tab / Change date and time / Change calendar settings /
    Date / Short date . . . change from M/d/yyyy . . . to . . . MM/dd/yy
    QUESTIONS:
    1.) How do you get rid of the time, which appears after the date? In IE, you use a lowercase "d" - but that doesn't work here.
    2.) Is there a way to change the font just for the Header and Footer, to something like Microsoft Sans Serif 10?
    Firefox leaves no room around the text in the Header and Footer at the edge. To fix:
    Address Bar / about:config
    Enter keyword "edge"
    Then change all four values for the printer you're using to:
    print.printer_Foxit_PhantomPDF_Printer.print_edge_bottom . . . 5
    print.printer_Foxit_PhantomPDF_Printer.print_edge_left . . . 10
    print.printer_Foxit_PhantomPDF_Printer.print_edge_right . . . 10
    print.printer_Foxit_PhantomPDF_Printer.print_edge_top . . . 5

  • Anytime I try to print in Firefox a Microsoft KB article that is 1 page, I always only get the first page.

    Anytime I print any Microsoft KB article, I only get the first page worth of text. This is very troubling because the articles are typically long, and I only get 1 page. The second page always comes out blank (even though in IE it will print out multiple pages with all the text).
    My specific example today is listed in the URL below. This example will only print to the "DIR" command, I don't get the full page printed out.
    Anyone else have this problem? Anyone have a resolution? I hate having to hit up IE just to print a single article.
    I updated to FF 8.01 just to make sure, and I have tried different printers and even computers, to no avail. Even the print preview has the issue, only the first page worth of text is printed and the second page is always blank (even if there are 3, 4, 5, etc pages of data to be printed).
    I have also tried the Firefox Menu -> Print command, and the "on-page" print command. I have seen moderate success with highlighting all the text that I want to print and going to "Print-Selection" but it is ugly.
    Any feedback or assistance is greatly appreciated.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • I'm trying to print out a credit card statement from my iPad, it only prints the first page not 4pages, please help

    I'm trying to print out a credit card statement from my iPad, it only prints the first page not the 4 pages, please help

    I read your first post when I was posing a separate question on the Mac Pro board.  I now see that we may be talking about printing from an iPad with Airprint instead!!!!!  I very much suspect the print command and settings are different for Airprint but I have never used it to be able to offer concrete advice.  I think the setting choices could be different even with Airprint on the laptop and further that you may not even be using Safari but some special app???
    I've not heard or seen the term "frame" in the context of printing before except perhaps in the context of a screen shot.  Is the credit card statement a "pop-up" of some kind rather than a webpage or pdf?

  • When I print a web page it only prints the first page and not the rest of the web page below the page break.

    When I print a web page firefox will only print the first page, all of the content to the first page break and nothing past that.
    How can I change the settings so that it will print more than on page?

    -> Tap ALT key or press F10 to show the Menu Bar
    -> go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Zoom -> click "Reset" -> Page Style -> select "Basic Page Style"
    -> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
    -> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache, Site Preferences''' -> click "Clear Now"
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> Click OK on Options window
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • My 4630 printer only prints the first page and then cancels

    My 4630 printer only prints the first page and then cancels the rest of the document. I have to manually choose to print one page at a time. If I try to print a document, it prints the first page and then cancels printing the rest of it. It's driving me crazy. I just bought this printer and, other than that, it works fine. I tried the HOTFIX link that was attached to a previous link as well as other microsoft updates, however, am still having no luck.

    Hi @ImaniL,
    I believe I have something that could assist with your printing issue
    My colleague, @JERENDS, has created these instructions to help with issues similar to yours, and I believe his instructions will help resolve your printing issue!
    Let me know how things go, and if that doesn't fix it, I will certainly see what else I can find for you
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • How do I display text only in the first page inXML Publisher

    Hi everybody,
    I've been reading so much, on the last two days, on this issue at this forum but I didn't get an answer. My problem is: In an invoices report some text and fields from the invoice header, (such as payment terms, bank details etc.), should be printed only in the first page of the invoice, (If the invoice has more than one page). These elements are not in the document header/footer but in the document body. That's why I think the different fist page of MS Word will not work. I tried also <? start@first-page:body ?>, with no success. Any idea, someone?
    Thanks,
    Shimon

    Hi,
    Did you find solution to your problem? I am facing same issue and I want to know how you solved it? It would be great help.
    Thank you.
    Regards,
    Rahul

  • TS1702 I wish to save a multi page document sent by e mail as PDF in Pages - it only files the first page? How do I save the entire document ?

    I have Pages on my iPad, which is brilliant....but when I want to save a multi page file sent to me by e mail, pages only saves the first page. How do I save the entire document?

    What type of document is the file? (ie. what is the file extension for tie file?)
    Regards,
    Barry

  • How can I view a PDF file on my IPad? I only get the first page.

    How can I view a PDF file from my Ipad, both in email and Internet links? I only get the first page.

    Support for viewing PDFs in emails and web-pages is built in to the iPad. You need not have bought an app for that.
    There are PDF apps that provide more features than the built-in functionality, but for basic viewing of multi-page PDFs no app is required.

  • Pages will only display the first page of text.

    Pages will only display the first page of text. New pages are created as usual but blank and pages are visible through quick views. Reinstalling does not fix the problem, I don't know if it is an issue with settings. Pages v 4.1 on OS 10.7.4. Running on new macbook with retina.
    This is apparently a retina issue. Update hopefully soon

    You have not said but it sounds like you are using a Macbook pro with retina display.
    Pages is exhibiting all sorts of problems with the Retina display which Apple is supposedly working on.
    Peter

  • Information only on the first page

    Hi,
    How do I print a portion of the xml only on the first page of the invoice. I am assuming this portion that need to appear on the first page should be put into the footer. But how can I exit out of a loop that is populating the body of the first page and put that portion to the footer. In which case where would the end of the loop reside.
    Thanks
    Shandrila

    Hi there,
    You could try creating sub-templates within your .rtf layout template. Create 2 sub-templates somewhere within yout .rtf and call them <?template:FirstPageFooter?> and <?template:OtherPagesFooter?>, or whatever names you want.
    In the first page MS Word footer, call FirstPageFooter (<?call:FirstPageFooter?>) then insert a page break even if you have no fields to display on page 2 and put <?call:OtherPagesFooter?> in the page 2 footer.
    Now I have done this in the header before, but not the footer. If this doesn't work the same in the footer you could always just call the sub-templates in the body at the end of page 1 and page2 and not use the MS Word Footer.
    Hope this helps
    -CC

Maybe you are looking for