Master page doubts

Dear All,
I have used ID only rarely, for single page documents but this time I'm trying to make a several pages manual and I can't seem to get around the very first steps (even though I tried following tutorials and help):
1st problem: I have a couple of 'rulers' drawn in Illustrator which include a company logo that I'd like to go on top and bottom of every page, like a header and footer and I have applied them to the master page hoping they would appear on every new page I add to the document but that is not happening. When I insert a new page it is blank. Would this be because of the way they were placed in the document (copy&paste)?
2nd problem: On the tutorials I saw, the total of pages in a document appeared as thumnails in the pages panel. In my case, no matter how many pages long I make my document, the panel only shows the master plus one spread of 2 pages.
I'll appreciate if you can point me in the right direction.
Thanks
JV

I have applied them to the master page hoping they would appear on every new page I add to the document
That's exactly right.
Your new pages are probably appearing blank because they have the [None] master applied to them. When you add a page it will use the master of the currently selected page. To change this, drag the appropriate master icon over the appropriate page icon in the pages panel.
As to why the pages are not appearing in the pages panel, are you sure you are not looking only at the masters part of the panel and seeing the [None] master plus a spread of your masters with the running heads? There is a slider bar that separates the masters from the pages.
A further thought. Look right at the bottom of the pages panel. It should tell you how many pages you have.
k

Similar Messages

  • Why is the master page default for 2 pages?

    New to ID; Why are the master pages paired? I made several Master pages that consist of one page and they worked fine, so I'm wondering what I'm missing; no doubt there is a reason that the default is for a pair of master pages. So, what;s the reason?
    vasi

    Master pages are paired into spreads when you have "facing pages" checked off in your document setup dialog. This allows for having different information, like mirrored positioning for page numbers, or different running headers, on opposite sides of the spread.
    If you only make single page documents or docs that are printed on only one side you might want to uncheck that box.
    Peter

  • Edit Page options in ribbon disabled after applying modified Seattle Master Page

    Hi,
    I'm working on a modified version of the Seattle.master page, and I have an odd permissions issue that is seen when my user (a farm admin) tries to edit a page on the site. On some pages, clicking Edit Page doesn't do anything at all. On others, I've been
    able to go into edit mode but not do anything with the Edit options afterward. In this scenario, most or all of the useful edit options are disabled, and I cannot use Save, Checkout, Discard the Checkout, Change the Page Layout, etc...
    Checking the JavaScript console in IE reveals this JS error that I don't see in the OOTB Seattle:
    SCRIPT5007: Unable to set value of the property 'href': object is null or undefined 
    [our.site.com], line 1128 character 590
    Here's the function being referenced:
    function _cUpdconetidProjectPropertyTitleGraphic(data, ctrl){ ctrl.href = slNavUrl; }
    Other possibly helpful information:
    Here is a snippet from the modified Seattle Master Page of where the ribbon code sits:
    <div id="s4-workspace" class="ms-core-overlay">
    <div id="s4-bodyContainer">
    <SharePoint:SPSecurityTrimmedControl runat="server" AuthenticationRestrictions="AnonymousUsersOnly">
    <wssucw:Welcome runat="server" EnableViewState="false" />
    </SharePoint:SPSecurityTrimmedControl>
    <div id="ms-designer-ribbon">
    <PublishingRibbon:PublishingRibbon runat="server"/>
    </div>
    As you can see, I have moved the Ribbon (div#ms-designer-ribbon) from its fixed position outside of the div#s4-workspace to inside of the div#s4-bodyContainer so that it scrolls with the page. Placing the ribbon inside div#s4-bodyContainer shouldn't be an issue,
    as I've made a Design Manager Master Page in the past and placed the ribbon there as well without issue.
    Does anyone know how I can get this modified Seattle master page to allow editing?

    Hi,
    Is there any custom JavaScript in it, sometimes error may occur due to some typo.
    Suppose that we can do the customization like this: With a copied master page, we can apply a part of the change first, then check it in the browser to make sure it can work without affecting the OOTB features. Then apply other parts one by one with immediate
    examinations...
    By doing this, it would be easier to find out which step in your whole customization would cause the issue.
    Best regards
    Patrick Liang
    TechNet Community Support

  • Can't change the master page after upgrading to SharePoint 2013.

    After upgrading our farm to SharePoint 2013 we are having trouble changing the master page for sites that don't have sub-sites. We are still using the v4 UI version, and that appears to be what is causing the problem. The error we get when going to /_layouts/ChangeSiteMasterPage.aspx
    is:
    System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaChromeSettingsPage.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()    
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    I took a peek at the source code for AreaChromeSettingsPage.OnLoad and found that it references a CheckBox control that does not exist in the v4 ChangeSiteMasterPage.aspx:
    protected override void OnLoad(EventArgs e)
    base.OnLoad(e);
    this.EnsureChildControls();
    if (!this.Page.IsPostBack)
    this.LoadValues();
    if (base.Web.Webs.Count == 0)
    this.resetSystemMasterPageSubSitesCheckBox.Visible = false;
    this.resetSubSitesCheckBox.Visible = false;
    this.resetAlternateCssSubSitesCheckBox.Visible = false;
    this.resetThemeSubSitesCheckBox.Visible = false;
    base.ConfigureCancelButton(this.BtnCancel);
    If I manually add a checkbox control with the ID "resetThemeSubSitesCheckBox" to a hidden panel in the v4 copy of ChangeSiteMasterPage.aspx the page works, but obviously this is not a best practice. How can we fix this without upgrading the UI version, which
    we are not yet ready to do?

    Thanks Mike - Could you please share what is your next step then? I also have custom master pages and layout but I am going to make new master page and layout in 2013 as we need to change the existing branding too. so, i upgrade the site collection. I understand
    the Look and Feel will not persist after the upgrade but I am concern that at least the page should show the content on the page after the upgrade. The page had Calendar webppart on it but after the upgrade it is coming blank.
    any suggestion?
    Regards,
    Khushi
    Khushi

  • Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

    Hi Folks,
    I was trying to save basic search template master page "seattle.master" after making change to the template.
    I have added just "CompanyName" folder and update the line below in seattle.master.
    Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
    When I save it, and refresh page on browser, it shows "Something went wrong" error.
    ULS says the following error : "UserAgent not Available, file operation may not be optimized"
    Pls let us know if there is a solution.
    Any help Much appreciated !
    Thanks,
    Sal
    

    Hi Salman,
    Thanks for posting this issue, 
    Just remove this below given tag and check out. It might be happened that your control is conflicting with others. 
    Also, browse the below mentioned URL for more details
    http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
    I hope this is helpful to you. If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Repeat Text Field Value on Master page

    This might be a really simple question. I have a form with two master pages. The second is applied to all but the first page. On the second master page I have a text field that I populate with user entered data from a text field. I want this value to show on all pages after the first page (page 2 to n). It shows up with the value on page 2, but all the rest have a blank value. Do I need to script something to make it repeat for all pages? Any help would be appreciated.

    The simpliest method would be:
    Under the Object tab, select Binding, and change the Default Binding to Global. The TextFields you create must have the same name, and Global binding will populate all the fields.

  • Master Page Header and Footer in Page Viewer Web Part

    Hi.
    I created a View in Pages Library to view specific folders.
    After that i added one Page Viewer web part to one of the aspx page.
    There in the Page Viewer web part properties Link i have provided the url of the view.
    It is displaying the folders but at the same time it is displaying the master page header and footer inside the web part.
    Now i need to display the folders alone inside the Page Viewer web part.
    Please let me know how to exclude the master page header and footer inside the Page Viewer web part?
    Regards,
    Sudheer
    Thanks & Regards, Sudheer

    I think that is the default behavior of the page viewer webpart.
    In the page viewer web part,your just enter the url of the website.So that is treated as webpage and it is displaying as per page.
    http://meritsolutions.com/meritmatters/archives/576-Displaying-a-File,-Folder-or-Web-Page-in-the-Page-Viewer-Web-Part.html
    If you want to display a folder, type in a network path to that folder under Link and the folder content will be displayed. 
    Find the more details about page viewer webpart in msdn
    http://office.microsoft.com/en-in/sharepoint-server-help/page-viewer-web-part-HA010024045.aspx

  • Master page Dynamic data not getting displayed in consecutive pages

    Hi,
       I have buit a dynamic form which has some dynamic content in master page and a dynamic table in the body page.
    Layout is
    Master page
          Sub form
                 Field1 -TextView
                 Field2 - TextField      bind with Node1--->Attribute1
                 Field2- TextField       bind with Node2---->Attribute2
                Field n - TextField
    all the text fields are bound to various nodes from RFC
    Body Page
             Sub form
                  Table -Grows Dynamically
    When i run the application all the fields are displayed perfectly in the first page.
    when the table data goes more than one page the problem arises
    The Text fields in the master page is  not displaying the values in the second page ,but the text views and the table values are fine.
    The values are getting displayed in both pages if i put any attribute inside the parent node.Is there any property i need to set at node level or subform level?
    Thanks in advance,
    Siva

    Hi
    I Would like to give a suggestion eventhough i don,t have answer to you question.
    Master Page is used for static content as per SAP and Adobe like company logo and  company address footer section and placing  watermarks etc....
    I feel because of the Dynamic behavior in master page it Leeds this problem.
    Regards
    Malli

  • Text wrap on Master Page items

    RE:  InDesign CS2 on Windows Vista
    Hello,
    I inserted a graphic on both of my master pages and applied a text wrap to them.  However, on my document pages, my text does not wrap around the graphics.  (In the Text Frame Options dialog box, the "Ignore Text Wrap" box is not checked.)  I know I can either override my master page items (and insert the graphic again) or control-shift-click on the graphic and force the text to wrap around it.  But that puts another link to the graphic in my document...and I'm trying to minimize the file size.
    Do you have any ideas on how to make the text wrap on the master pages work on the document pages?

    Text wrap on masters is not honored on live pages in CS2. It was added as feature in CS3.
    Bob

  • SharePoint Foundation 2013 - Master Pages

    I am trying to create a SharePoint Intranet site but am quickly running into a number of issues and am looking for help.
    I need to create a site that has multiple subsites (one for each department) however all of the subsites need to have a consistent look and feel about them so I have delved head long into branding, creating master pages, etc.  I have set-up  a
    master page, with a logo and icon, I would like this to cascade down to all subsites and pages below however I have no option to set this up.
    Is this a limitation of using foundation?  What other limitations are there to foundation that I need to be aware of?
    There also doesn't seem to be any visual designer, what do people use and what would people recommend to use?
    I am sure there will be a number of other questions that I need to ask but these will do for starters.
    regards,
    Matt

    Please refer the below link to apply custom master page to all sharepoint subsites
    http://rickhilferink.wordpress.com/2011/01/25/creating-a-sharepoint-2010-foundation-masterpage-solution-and-automatically-activate-it-for-all-sites-and-newly-created-subsites/
    http://aryannava.com/2011/03/29/how-to-apply-custom-master-page-and-theme-to-all-sharepoint-2010-sub-sites/
    For SP 2013 foundatoin limitations and boudaries, pls refer the below link
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/c2c3bdbc-2e48-436c-9bb8-b604f00de8fa/sharepoint-foundation-2013-limitation
    Please don't forget
    to mark it answered, if your problem resolved or helpful.

  • Create a custom Master Page in SharePoint Foundation 2013

    Hi,
    I am new to SharePoint foundation.
    I am trying to create a custom master page and save it as template, so that i can use it for all other sub sites. But i don't know where to start. Also i tries searching in Google, i got results for share point and not for share point foundation.
    So, Please give me a step by step procedure or a link to step by step procedure on how to create a master page, save it as template and use it for a sub site.
    Thanks in advance,
    Gowtham R

    Few points to note related to SharePoint Master page:
    You don't need to create master page template. If you deploy your master page in site collection level you can reuse the same master page in subsites without copying again and again, rather just by referencing
    You have not mentioned how you are going to deploy your master page. If you have any Visual Studio (VS) solution already, try to add your  master page in the VS solution and deploy your master page (and other branding components) as SharePoint WSP
    solution.
    Deploying master page will not activate the master page, you need to use some kind of 'Web Level Feature' to activate your branding - the feature will basically set the master page property of SharePoint site to your custom master page.
    Please follow the links below for steps by steps instructions (and you will find many just by googling 'sharepoint master page visual studio'):
    http://frederik.se/how-to-deploy-a-custom-master-page-in-sharepoint-2013-using-visual-studio/
    http://joshuaorimogunje.wordpress.com/2011/10/05/how-to-create-custom-master-page-for-sharepoint-2010-using-visual-studio-2010/
    http://blogs.msdn.com/b/bobgerman/archive/2011/01/31/packaging-master-pages-and-page-layouts-with-visual-studio-2010.aspx
    http://go.limeleap.com/community/bid/291931/Creating-a-Custom-SharePoint-Master-Page-with-jQuery-Using-Visual-Studio
    Thanks,
    Sohel Rana
    http://ranaictiu-technicalblog.blogspot.com

  • Adding new elements to a Master Page and sharing them to existing pages

    I need to include new navigation elements on the master page
    and I want it to show up on pages I've already created. I've added
    the new elements on a layer of their own which is part of the
    master page, but the Share Layer to Pages... option is dimmed.

    jcbluesman wrote:
    > I'm using CS4, Jim, and here's a link to the .png
    > (
    http://idisk.mac.com/jconstant-Public/deimos.png
    >
    > The 3 tabs in the upper right on the master page are the
    ones I'm trying to
    > share across the existing pages. I created them in PS
    (also CS4), then imported
    > the .psd into this FW document, if that makes any
    difference.
    >
    > Thanks,
    > Jim
    >
    OK there are two related as I see it.
    Each of your pages consists of a solid, opaque bitmap for a
    main image.
    Master Pages, by default, are at the bottom of the layer
    stack. Your
    tabs ARE present, you just can't see them because they are
    covered up by
    the bitmap.
    Assuming you don't have those page images as multi-object
    elements,
    where you can edit the blue backgrounds, there are still two
    things you
    can do, both of which are pretty easy.
    Go into each page and temporarily reduce the opacity of Layer
    1.
    Use the marquee tool to draw a selection around the area of
    the tabs.
    Delete the selection.
    Return the lay back to full opacity.
    OR
    Try dragging the Master page to the top of the layer stack in
    each page.
    Hide or delete the Master page background.
    This option is a little trickier, but I was able to do it.
    Wait for the
    black bar to appear before you release the mouse. You may
    need to try
    this a few times before it works.
    HTH
    Jim Babbage - .:Community MX:. & .:Adobe Community
    Expert:.
    http://www.communityMX.com/
    CommunityMX - Free Resources:
    http://www.communitymx.com/free.cfm
    .:Adobe Community Expert for Fireworks:.
    Adobe Community Expert
    http://tinyurl.com/2a7dyp
    .:Author:.
    Lynda.com -
    http://movielibrary.lynda.com/authors/author/?aid=188
    Peachpit Press -
    http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
    Layers Magazine -
    http://www.layersmagazine.com/author/jim-babbage

  • Items are not flowing into the second master page.

    Hello,
    any help on this is really appreciated. this is the situation. There are two master pages. I have created a flow content subform. And within this, i have created a position content subform. Within this, i have the different fields of an item level table. There are a total of 14 records. three pages are used. And all the three are the first master page. The second master page is not being used. I have tried many ways, but could not suceed. Could any one out there suggest a way to solve this problem?

    Hello,
    I'm facing a problem here. Within my print form I have one master page.
    Basically I have a dynamic table which must be followed by a standard text.
    So I've created a subform (flow content), in it I have another subform (flow content, table): in it one subform (flow content, table row) and a subform (position content with my text).
    Although all the 'allow page breaks' are checked, the issue I have is that the second page is never printed...

  • Custom Master Page Issue in Intranet

    Hi All,
    I hope someone can assist with this, we implemented this particular SharePoint 2007 portal approximately 5 years ago.  An outside consultant created this custom master page, for some reason out of nowhere we are experiencing this bizarre issue with
    the master page and checking in and out documents. I have attached an image showing the error message being displayed below(couldn't attach until my account was verified but it states 'Error invalid viewstate, port 52208, user agent Mozilla/4.0..., viewstate,
    referrer, path).  I came across one source on the web that stated something about the search box code and it causing issues out of nowhere on the master page.  So in my dev environment I made the change and removed the following code from the master
    page below.
    <td style="padding-top:8px;" valign=top>
                <asp:ContentPlaceHolder id="PlaceHolderSearchArea" runat="server">
                <SharePoint:DelegateControl runat="server" ControlId="SmallSearchInputBox"/>
                </asp:ContentPlaceHolder>
    </td>
    As soon as this code is removed and the page is published again everything begins to work again, the problem is I can't remove search from this intranet portal as it is heavily used.  Any assistance would be greatly appreciated.

    By any chance, do you still have access to the solution package in which the master page was contained? Normally, you would see another .ascx user control overriding the delegate search control in there. I'm almost positive that this custom control is
    what causing this issue.
    Nikolas Charlebois-Laprade Microsoft Certified Professional & Software Engineer http://nikcharlebois.com

  • I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

    I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
    I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
    Thanks!

    Links should not create any problems in Keynote.  If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
    Try this repair for Keynote,  ensure you complete all the tasks and in the order shown:

    delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application

    empty the trash:  Finder > Empty Trash

    Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
    When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
    If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
    4  
    Let the Mac fully boot up, it will take longer as the OS is repairing the drive

    when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click  repair disc permissions

    when complete, restart the Mac normally, Apple menu > Restart

    install Keynote from the Mac App Store
    let us know if this helped

Maybe you are looking for

  • Data Search In SQL Database

    Hi, i want user to type a string in textbox, and i will search, if textbox.text exists in my SQL database table or not. Below is the code i'm using :---------------  string txtname = (txtEmpName.Text).Trim();  sQuery = "select * from tbUser where Use

  • Do numbers docs updated on Mac update on iOS devices?

    Updated a Numbers workbook on my iMac. It's stored in iCloud. The update is not showing up on the same workbook on either my iPhone or iPad. What am I missing?

  • Concurrent startup managed servers in a cluster

    I'm using WLS 6.1 sp3 on Solaris 8. I configured 24 instances in a cluster.           I tried to startup all managed servers at the same time. Some of the           instance failed. Due to the WLS startup time (half hour to start an instance         

  • Correct way to handle an exception in a constructor?

    Hi I was wondering if anyone could tell me if I implemented my code correctly. It compiles and runs fine, I'm just wondering if there is a more efficient or better way to do this.      static Cabin cabinTest; public static void main(String[] args)   

  • [SOLVED] Problem with full system backup with rsync

    Hello, I made a backups by following this page: https://wiki.archlinux.org/index.php/Fu - with_rsync Then I copied it to another computer, edited grub and fstab and it's almost works. Commands su and sudo produces: Cannot set groups, operation not al